ERP Installation MS SQL server 2005

Hi gurus,
Can anyone tell me is it possible to install SAP ERP 2005 with MS SQL sever 2005 STANDARD edition? In the installation guide, I only see MS SQL server 2005 Enterprise edition.
Regards
Chin

Hi,
Thats correct. You can only install enterprise edition.
Rgds,
Suman

Similar Messages

  • Installation of SQL Server 2005 Express Edition with Mobile Sales 5.0 SP07

    Dear gurus,
    I have the following question for you: is it possible to run Mobile Sales 5.0 SP07 with SQL Server 2005 Exp Edition? The specifications that I have found for both applications are:
    - MOBILE CLIENT:
    Installation of Mobile Client with CRM release 5.0 requires the installation of Microsoft .NET framework 1.1. (OSS note 879643)
    - SQL Server Express Edition: Microsoft .NET framework 2. 0
    Has anyone installed it this way?
    Thank you in advance,
    Judit.

    Hello Judith,
    It is possible to have 5.0 SP07 Mobile Client installed on machine with SQL Server Express edition. For more information on this, you may refer the installation guide for 5.0 SP07 (Software Pre-requisites section, SQL Server versions). However, please note, you cannot install 5.0 SP07 Mobile Development Workstation on Express edition due to the large repository size.
    You may feel free to get back to me in case of any further concerns/comments.
    Thanks and Best Regards,
    Niranjan
    (Reward points will be appreciated if you feel this issue is resolved).
    N

  • PeopleSoft HRMS Installation (MS SQL Server 2005)

    Hello there,
    I am trying to install HRMS with database MS SQL Server 2005. I am running into few issues when i am trying to do PeopleSoft database installation through Database configuration wizard.
    The following is the error message :
    ERROR: Setup fails to connect to the SQL Server in the system. The error
    message is:
    Error in reading C:\HRMS9.0/log/mssqlversion.log
    Please make sure a SQL Server is running in the system. The minimum
    supported version is SQL Server 2000. Please click 'Back' to correct the
    problems or click ‘Cancel’ to exit.
    I am getting the above error when Sql server is running and i could not find the above mentioned file in HRMS9.0/log.....
    Help Appreciated
    Thaank you

    Depending what you want to do with your database :
    1. a DEMO database, choose demo which contains data sample, use for training or dev database
    2. a SYS database, choose system which does not contains data sample, use for UAT and prod database
    3. a Peopletools system database, doesn't contains any application data (only Peopletools data), for some very specific usage like performance monitoring
    The character set is also depending what you are planning the language you want into. If only English, or only latin characters, then Western European would be a good choice.
    Nicolas.

  • SQL Server 2005 installation after VS 2005 installation

    I saw in another thread that someone had trouble installing SQL Server 2005 after installing Visual Studio 2005.  The answer alluded to the fact that the default/standard installation of VS 2005 results in the installation of SQL Server Express at the same time. 
    I installed Visual Studio 2005 Professional on my PC already, and am about to install SQL Server 2005 Developer edition.  Is there any way to know now (before installing SQL Server) that something will cause an installation issue?  I would like to do whatever I can to prevent problems in advance, so is there anything I can / should to before installing SQL Server? 

    I did not mention in my previous post that after much reading in help forums and treading on proverbial eggshells (hoping I was doing things correctly to ensure good installation of purchased products thereafter), I recently uninstalled/removed several beta versions of Visual Studio and SQL Server from my personal/home PC (O/S: Windows XP Media Center Edition Version 5.1, build 2600, SP2).  I have already jumped over the "uninstall wall" several times to get to this point.  That is why I am proceeding with caution, to avoid any more torture;  I would prefer to do the right thing (even though I've apparently already started down the wrong path) to avoid any more headaches. 
    I was unsure at first, but went in search of logs and registry entries to see if SQL Express was installed, and am now fairly sure it was, because of 4 items I found:
    1)   In C:\Program Files\Microsoft Visual Studio 8\Microsoft Visual Studio 2005 Professional Edition - ENU\Logs\dd_vsinstall80.txt:
    [04/29/08,13:10:53] Microsoft SQL Server 2005 Express Edition x86: e:\setup\..\wcu\sse\SQLEXPR32.EXE exited with return value 0
    [04/29/08,13:10:53] InstallReturnValue: GFN_MID SSE x86, 0x0
    [04/29/08,13:10:53] Microsoft SQL Server 2005 Express Edition x86: Error code 0 for this component means "The operation completed successfully."
    2)  In: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\
    SQLSetup0006_D8GKLNB1_SQL.log:
    MSI (s) (34:88) [13:10:15:218]: Product: Microsoft SQL Server 2005 Express Edition -- Installation completed successfully.
    3)  Add/Remove Programs shows “Microsoft SQL Server 2005” is on my machine (although “Express” is not part of the name).  Also listed are:  Microsoft SQL Server Native Client, Microsoft SQL Server Setup Support Files (English), Microsoft SQL Server VSS Writer, MSXML 6.0 parser
    4)  Searching for InstallDate in regedit:  HKLM|Software\Microsoft\Windows\CurrentVersion\Intaller\UserData\5-1-5-18\Products\7DDFFFA258DE09A4C
    DisplayName                Microsoft SQL Server 2005 Express Edition
                InstallDate                    same date as Visual Studio 2005 installation
                InstallSource                 l:\f58e49f47a1d350886021c2b2dd1\Setup\
    So now I would like to know what the best course of action is to remedy this with the least amount of aggravation.  Is it possible to just use A/R programs to uninstall the components of SQL Server 2005 (Express) that interfere with installation of SQL Server 2005 Developer edition?  Would those be the workstation components?  

  • SQL Server 2005 Installation Error

    I am installine ECC6 on SQL Serer 2006. I have started the SQL Server installation, using the SQL4SAP.vbs and after about 10 minutes the installation stops with an error. I am pointed to a fine Summary.txt but the details in the file do not give a clue on the problem:
    Machine         : SAPDEMO
    Product         : SQLXML4
    Product Version : 9.00.1399.06
    Install         : Successful
    Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_SQLXML4_1.log
    SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.
    Time            : Mon Dec 03 09:09:38 2007
    List of log files:
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_Core(Local).log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_SQLSupport_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_SQLNCLI_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_OWC11_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_SqlWriter_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_BackwardsCompat_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_MSXML6_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_SQLSupport_2.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_SQLNCLI_2.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_OWC11_2.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_BOL_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_BackwardsCompat_2.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_SQLXML4_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_Datastore.xml
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_.NET Framework 2.0.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_Core.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_.NET Framework 2.0 LangPack.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_.NET Framework Upgrade Advisor.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_.NET Framework Upgrade Advisor LangPack.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_.NET Framework Windows Installer.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_.NET Framework Windows Installer LangPack.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_SNAC.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_Support.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_SCC.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0004_SAPDEMO_WI.log

    Hi Rajeev,
    Indeed it was a typo error I am attempting SQL Server 2005.
    I am using the 32 bit installation, that has been checked.
    Here are the details from C:\Windows\SQL4SAP.log
    Customized installation of SQL Server 2005 for SAP *
    Log File: C:\WINDOWS\SQL4SAP.log
    Script started 03/12/2007 08:46:25 on SAPDEMO
    System settings:
      Win32_Processor.Name=Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz
      Win32_Processor.Name=Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz
      Win32_ComputerSystem.SystemType=X86-based PC
      Win32_OperatingSystem.OSType=18
      Win32_OperatingSystem.Version=5.2.3790
      Win32_OperatingSystem.ServicePackMajorVersion=2
      Win32_OperatingSystem.Caption=Microsoft(R) Windows(R) Server 2003, Standard Edition
      Win32_OperatingSystem.ProductType=3
      Win32_OperatingSystem.OSProductSuite=272
      Win32_OperatingSystem.OSLanguage=1033
    Windows version:
      OSVersion         = 5.2
      OSFamily          = Windows2003
      OSServicePack     = 2
      OSEdition         = Server
      OSSystemType      = X86
      OSProductSuite    = Terminal Server
      OSMsiVersion      = 3.1.4000.4042
      OSMdacVersion     = 2.82.3959.0
      OSLanguage        = English – United States
      OSLanguageID      = 1033
    Environment on SAPDEMO:
      userDir           = C:\Documents and Settings\Administrator\
      tmpDir            = C:\DOCUME1\ADMINI1\LOCALS~1\Temp\1\
      rootDir           = C:\WINDOWS\
      prgDir            = C:\Program Files\
      prgDirX86         = \
    SQL4SAP version:
      version:          ' v3.2.44    Mar 2007: SQL2005 SP2, Windows2003 SP2
      size:             86124
      created:          30/11/2007 16:59:31
      modified:         20/03/2007 13:36:44
      exe:              C:\WINDOWS\system32\cscript.exe
      script:           C:\SAP_CD\CD2\SQL4SAP.vbs
      C:                C:
    Script path:
      myRoot            = C:\SAP_CD\CD2\
      myDir             = C:\SAP_CD\CD2\x86\
      myDirUNC          = C:\SAP_CD\CD2\x86\
    Script settings:
      SqlAuthInstall    = False
      SilentInstall     = False
      DeEditionOnly     = False
      DeEditionPossible = False
      SapItMsgBox       = False
      SilentRtmSetup    = True
    Service Account:
      "C:\SAP_CD\CD2\x86\SqlCmd\GetSidName.exe" S-1-5-18 =>NT AUTHORITY\SYSTEM
      OSSystemAccount= NT AUTHORITY\SYSTEM
    03/12/2007 08:46:28
    Input Box "Select SQL Server instance"
    No SQL Server instance was found.
    SQL Server Native Client               not installed
    SQL Server 2005 Client Tools           not installed
    Enter a new or existing instance name.
    - for a Default Instance, enter:     (default)   or   .
    - for a Named Instance, enter:       <SID>
    To install SQL Client Tools Only, press Cancel.
    Result: (default)
    Registry settings (1/2):
    HKLM\SOFTWARE\Microsoft\DataAccess\FullInstallVer
    READ: 2.82.3959.0
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{3d06c673-5e8a-41c0-b47f-3c3ca0a22e67}
    READ: 4
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{3d06c673-5e8a-41c0-b47f-3c3ca0a22e67}
    WRITE(REG_DWORD): 4
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{319b29ae-7427-4fbc-9355-22df056c27a4}
    READ: 4
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{319b29ae-7427-4fbc-9355-22df056c27a4}
    WRITE(REG_DWORD): 4
    HKLM\SOFTWARE\Microsoft\Microsoft SQL Native Client\CurrentVersion\Version
    READ:
    HKLM\SOFTWARE\Microsoft\Microsoft SQL Native Client\CurrentVersion\PatchLevel
    READ:
    HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\90\Tools\ClientSetup\CurrentVersion\CurrentVersion
    READ:
    HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\90\Tools\ClientSetup\CurrentVersion\CSDVersion
    READ:
    03/12/2007 08:46:32
    Message Box "Confirmation"
    You have chosen to install the new instance
    SQL Instance:       (default)
    SQL Version:        9.00.3042
    SQL Edition:        2005 Enterprise Edition
    SQL Collation:      SQL_Latin1_General_CP850_BIN2
    Authentication:     Windows only
    Login sa:           random password, login disabled
    =======================================
    The installation may take 15 minutes or longer
    =======================================
    Do you want to start the installation now?
    Result: vbOK
    03/12/2007 08:46:34
    installing SQL Server 2005 Enterprise Edition on X86 - build 9.00.1399 ...
      Log File:    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt
      Command:     "C:\SAP_CD\CD2\x86\EnterpriseEdition\Servers\setup.exe" /qn USERNAME="SAP ISV Royalty Licensing Program" ADDLOCAL=Connectivity,SQL_Tools90,SQLXML,Tools_Legacy,SQL_Documentation,SQL_BooksOnline,SQL_Data_Files,SQL_FullText PERSEAT=50 INSTANCENAME=MSSQLSERVER SQLCOLLATION=SQL_Latin1_General_CP850_BIN2 AGTAUTOSTART=1 SQLACCOUNT="NT AUTHORITY\SYSTEM" AGTACCOUNT="NT AUTHORITY\SYSTEM" SQLBROWSERACCOUNT="NT AUTHORITY\SYSTEM" DISABLENETWORKPROTOCOLS=0 SAPWD=xxxxxxxxxxxxxxxx
      Return Code: 1605
    03/12/2007 08:48:41
    Log file C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt
    Microsoft SQL Server 2005 9.00.1399.06
    ==============================
    OS Version      : Microsoft Windows Server 2003 family, Standard Edition Service Pack 2 (Build 3790)
    Time            : Mon Dec 03 08:46:48 2007
    Machine         : SAPDEMO
    Product         : Microsoft SQL Server Setup Support Files (English)
    Product Version : 9.00.1399.06
    Install         : Successful
    Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SQLSupport_1.log
    Machine         : SAPDEMO
    Product         : Microsoft SQL Server Native Client
    Product Version : 9.00.1399.06
    Install         : Successful
    Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SQLNCLI_1.log
    Machine         : SAPDEMO
    Product         : Microsoft SQL Server VSS Writer
    Product Version : 9.00.1399.06
    Install         : Successful
    Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SqlWriter_1.log
    Machine         : SAPDEMO
    Product         : Microsoft SQL Server Setup Support Files (English)
    Product Version : 9.00.1399.06
    Install         : Successful
    Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SQLSupport_2.log
    Machine         : SAPDEMO
    Product         : Microsoft SQL Server Native Client
    Product Version : 9.00.1399.06
    Install         : Successful
    Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SQLNCLI_2.log
    Machine         : SAPDEMO
    Product         : Microsoft SQL Server 2005 Books Online (English)
    Product Version : 9.00.1399.06
    Install         : Successful
    Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_BOL_1.log
    Machine         : SAPDEMO
    Product         : SQLXML4
    Product Version : 9.00.1399.06
    Install         : Successful
    Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SQLXML4_1.log
    SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.
    Time            : Mon Dec 03 08:48:39 2007
    List of log files:
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_Core(Local).log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SQLSupport_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SQLNCLI_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SqlWriter_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_MSXML6_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SQLSupport_2.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SQLNCLI_2.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_BOL_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SQLXML4_1.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_Datastore.xml
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_.NET Framework 2.0.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_Core.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_.NET Framework 2.0 LangPack.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_.NET Framework Upgrade Advisor.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_.NET Framework Upgrade Advisor LangPack.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_.NET Framework Windows Installer.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_.NET Framework Windows Installer LangPack.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SNAC.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_Support.log
         C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_SAPDEMO_SCC.log
    service MSSQLSERVER does not exist
    03/12/2007 08:48:41
    Message Box "Installation failed"
    The unattended installation failed.
      Installation Step: SQL Server - build 9.00.1399
      Return Code:       1605
      Log File:          C:\WINDOWS\SQL4SAP.log
    Check the log file above!
    See also SAP note 896566 for known issues
    Result: vbOK
    Registry settings (2/2):
    HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL\MSSQLSERVER
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg0
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg1
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg2
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg3
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg4
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg5
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg6
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg7
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg8
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg9
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg10
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg11
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg12
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg13
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg14
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg15
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg16
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg17
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg18
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg19
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLServer\MSSQLServer\Parameters\SQLArg20
    READ:
    HKLM\SOFTWARE\Microsoft\MSSQLSERVER\Setup\SQLPath
    READ:
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{3d06c673-5e8a-41c0-b47f-3c3ca0a22e67}
    WRITE(REG_DWORD): 4
    HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\{319b29ae-7427-4fbc-9355-22df056c27a4}
    WRITE(REG_DWORD): 4
    03/12/2007 08:48:47
    Quit script with return code 1

  • SQL Server Error when tryingt to install the CMS DB on SQL Server 2005 x64

    I am trying to install BOEXI R3 on w2k3 64-bit OS in a SQL Server 2005 x64 database, I am currently at the installation step where i Specify an exisiting CMS database. I created a System DSN and tested it, and it was successful. So when I got to the screen where I select my datasource I had to check use trusted connection because the datasource would not show up when Use DSN created by WOW64 option was checked. From there I could select the database I created. Oh yeah, I also made the application server local system account part of my DB admins group so it has full access to the database yet when I click next to connect I get a CMS Database Error: STU000226. here is what I have in my log:
    ThreadID     Message
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: findDFA_LLR:  (CmdLineDir) C:Documents and SettingsgsdadminDesktopBOEXI and BSM AnalyticsBOEXI R3 Full Version from SAPpackagedbcheck
    sqlrule.llr
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: Loading: database subsystem only
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: loading libary succeeded
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: DatabaseSubsystem::Init()
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:96): trace message: Creating the shared CWireObject::PropertyNameMap
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:118): trace message: Setting static property map
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:125): trace message: CWireObject::InitializeStaticPropertyMap() - reference count: 1
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: initializing subsystem succeeded
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: Loading: done loading subsystem - database subsystem only
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: DatabaseSubsystem::Connect()
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.DBConnectionManager.cpp:802): trace message: DBConnectionManager - Setting total target number of connections for pool 0 to 1.
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.SQLServerDatabase.cpp:119): trace message: SQLServer error found:  ErrorMessage( (Microsoft)[ODBC Driver Manager] Data source name not found and no default driver specified), ErrorCode(0)
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.dbutils.cpp:820): trace message: Caught DatabaseSubystem Error: BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "BOEXI_CMS". Reason:  (Microsoft)[ODBC Driver Manager] Data source name not found and no default driver specified
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: DatabaseSubsystem::Shutdown()
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:175): trace message: CWireObject::TerminateStaticPropertyMap() - reference count: 1
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:182): trace message: Releasing
    static property map
    How do I get past this?

    The workaround was, I installed the SQL Server Client tools and created a System DataSource  and then had to create a user DataSource  (it is a quirk in the installer I guess) to get past this point in the installation. Now I have an even bigger problem. Everything but the CMS installed and the installer hung at the "Configuring the CMS" part. The installation finished but when I tried to log into the Central managment console I got this error:
    Error: Server GSD-RRPT-RDC:6400 not found or server may be down (FWM 01003) null
    I looked at the forums for the cause of this error and came to the conclusion that BOEXI does not support an installation on SQL Server 2005 when using Integrated Authentication to the SQL Server. See the engineers here disabled SQL Authentication for the SQL Server and  will not allow it.
    Is this true? Or is there a workaround to install the CMS using Integrated Authentication in the DataSource ?
    Thanks.

  • SQL Server 2005 Database connecting problem

    Hi,
    I have installed MDM 5.5 SP06 - 64bit servers,  32bit clients and  SQL server 2005  in Vista 64 bit operating system.
    But I can't able to connect the server...
    I believe sa is reserved user name but in SQL server management studio I couldn't able to connect the server and registered the Server.
    Can you guys please guide me in this regard how to fix this problem ASAP?
    Thanks,
    Pooja

    Hi,
    Thanks for your time and help, but I couldn't able to see the database itself.
    as I know my computer name is database name but SQL Server is not providing that.
    and its showing network data base names.
    If I type the database name and user is sa...but there is no luck in connecting...
    is there any way that we can define server name and user names??? also it doesn't ask for any database name or user name during installation of SQL Server 2005
    I'm not a SQL person so, please help me in this regard.
    Thanks, Pooja

  • ERP ECC 6.0 Cluster Installation under MS SQL Server 2005

    Hi,
    anybody in the world did a ECC 6.0 Cluster installation under MS SQL Server 2005 database?
    Can anyone please share some usefull documents to understand... This is new to me and doing it for first time.
    Pls help
    RGC

    Hi,
    I'm looking for a customized document for ECC installation (how to document) and not a SAP Standard one as i'm new to cluster. Please share if any.
    How to configure the nodes in three tier architecture?
    In which node the DB should be installed?
    In which node the CI should be installed?
    How to configure Central Point of Failure (CPOF)?
    How the ECC 6.0 cluster works and how to distribute the resources (SAP) across nodes?
    What are the resources that needed for failover from one node to another?
    Expecting help.
    rgds
    RGC

  • MSCS cluster installation on win + sql server 2005

    Dear Guru,
    I want to  installing MSCS cluster installation on win 2003 ENT.with sql server 2005 .
    Choosing High availability (ABAP)
    Please Guide me prerequisit & partation on local & shared disk.
    Its Urgent.
    Personal mail ID is [email protected]
    Regards
    Amol kulkarni
    Message was edited by:
            amol kulkarni

    Hi,
    You know what ?
    Step by step installation is different in every company because each company has a different usage of SAP software.
    It is precisly your job as a SAP sys admin, to study the problem, to solve it and to write the step by step documentation.
    In my company, it took me one month and my documentation is 250 pages long.
    You will not get someone else doing YOUR job instead of you.
    The standard SAP documenation is perfectly enough to study your particular case...
    Good luck !
    Olivier

  • How to completely clean previous Primavera P6 and OracleXE ,SQL server 2005 for fresh new re installation

    Hi
    I am using XP SP3 and I had previous successful installation for Primavera P6 8.3 with samples in the past, until my hard drive gave a message that’s its almost full, I tried to move the database to D:\ but I was stuck and lost connection with data base, I made uninstall for Primavera from add remove programs then made "Deinstalling Oracle Database XE" and followed all steps in the article http://docs.oracle.com/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHDDHJD
    to clean the registry and all traces of the old installation, and uninstalled Microsoft SQL server 2005 with all components,
    When I re installed Primavera with sample projects everything was ok until the mid of oracleXE installation  I had an error message , I run Primavera P6 8.3 setup again and chose to repair installation , this time gave me installation finished.
    When I run Primavera I am not able to connect to Database, even traces of old installation like Alias names which was previously used exists .
    When I connect to database through web home page I can log in as “system” but it has only HR in it, and users are 12 internal and 1 HR with no ADMPRM$PM.
    I don’t think that sample projects are downloaded,
    How to reconnect with database and install the Primavera sample projects. or even to clean all traces for the Primavera and data base oracleXE then make fresh re install , Thanks. Zeyad

    Hi
    I am using XP SP3 and I had previous successful installation for Primavera P6 8.3 with samples in the past, until my hard drive gave a message that’s its almost full, I tried to move the database to D:\ but I was stuck and lost connection with data base, I made uninstall for Primavera from add remove programs then made "Deinstalling Oracle Database XE" and followed all steps in the article http://docs.oracle.com/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHDDHJD
    to clean the registry and all traces of the old installation, and uninstalled Microsoft SQL server 2005 with all components,
    When I re installed Primavera with sample projects everything was ok until the mid of oracleXE installation  I had an error message , I run Primavera P6 8.3 setup again and chose to repair installation , this time gave me installation finished.
    When I run Primavera I am not able to connect to Database, even traces of old installation like Alias names which was previously used exists .
    When I connect to database through web home page I can log in as “system” but it has only HR in it, and users are 12 internal and 1 HR with no ADMPRM$PM.
    I don’t think that sample projects are downloaded,
    How to reconnect with database and install the Primavera sample projects. or even to clean all traces for the Primavera and data base oracleXE then make fresh re install , Thanks. Zeyad

  • Error during installation of Microsoft SQL Server 2005

    Hello All,
    During installation of Microsoft SQL Server 2005 I have got the below error message
    "There was an unexpected failure during the setup wizard"
    From this link http://support.microsoft.com/kb/916760 i came to know that this error occurs just because I used SQL Server 2005 installations from a folder on a network share.
    After that i unstall everything & copy the installations in a local drive. But again when we restart the activity we got the same error message & the installation completed.
    Any hint why this happens..
    Thank You.
    Kind Regards,
    Jituda

    Hello Jituda,
    I think we need to focus on the error in the setup log first.
    Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run:
    Source File Name: datastore\cachedpropertycollection.cpp
    you might be able to see more detailed error information in the log.
    You may check if the following links help:
    http://www.sqlserverfaq.net/2008/12/17/sql-server-2005-setup-failing-to-install-on-cluster-with-unexpected-failure-while-performing-the-scc-checks/
    http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/f998b073-4378-4d02-95ac-c9afb31c7a60
    In addition, to clarify, the SQL4SAP.VBS script does not support Microsoft Cluster Service (MSCS). If you want to run the
    script in an MSCS configuration, you get an error message. In MSCS configuration need to install the SQL Server database software manually instead of using the script. Please see the corresponding SAP product installation guide under http://service.sap.com/instguides
    Kind regards,
    Qingqing Wang

  • How retrieving the product key for a SQL Server 2005 installation

    Hi,
    is it possible to retrieve the product key associated to a SQL Server 2005 installation?
    If yes, how?
    Many thanks

    Hello,
    The following tool may provide you the product key for SQL Server 2005 and SQL Server 2008 instances.
    http://www.nirsoft.net/utils/product_cd_key_viewer.html
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Installation of ODI with SQL Server 2005

    Hi
    I am trying to install ODI with MS Sql Server 2005.
    I created a database in Sql Server & created a user with db_owner rights for logging into the database.
    While trying to install Master Repository, i selected Sql Server with following details
    Driver: com.microsoft.jdbc.sqlserver.SQLServerDriver
    URL: jdbc:microsoft:sqlserver://<myhostname>:1433;SelectMethod=cursor
    The repository does not get created giving error:
    *com.sunopsis.core.q: java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 1 (""): Data type 0x38 is unknown*
    Now if i change the URL to jdbc:microsoft:sqlserver://<myhostname>:1433, the repository gets created successfully. But at the time of login into the topology manager using the same Master repository, it again prompts me the same error.
    Has anyone faced the same issue?

    Hi,
    You are using SQL server 2005 but trying to connect using the SQL server 2000 connection details you should be using
    com.microsoft.sqlserver.jdbc.SQLServerDriver
    jdbc:sqlserver://ServerName:1433;databaseName=DBNAME;SelectMethod=cursor
    You will also need to make sure you are using the correct SQL server 2005 driver, if you are using a version of Java before 1.5 for ODI then you will need the SQL Server 2005 1.2 JDBC driver.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Changing installation PATH on SQL Server 2005 with SAP DVD

    Hi experts,
    i would like to install SQL Server 2005 delivered by SAP on another disk, for example D: instead of C:\Program files\
    i read the note 363018 but there's no solution to my problem.
    Thanks in advanced for your help.
    Pascal.

    Hi Markus,
    yes, that's what i have expected but i m not good enought to find the changement to do.
    Am i allowed to post the script?
    Thanks.

  • Upgrade to SQL Server 2005 media

    I am trying to find out if SAP provides a DVD with the SQL Server 2005 software for upgrade/installation as it did for 2000.  I have found references in notes to using the DVD provided by SAP and a SQL4SAP vb script to run to do the install.  And in other docs I see references to using the setup.exe provided on the media disk (I'm assuming here it is the MS media for SQL Server).
    Is there a SAP disk for upgrading SQL Server?  If so where can I find it.
    If I can't locate this are there any issues to be aware of if I use the MS provided install disks for SQL Server 2005 to perform an upgrade?
    Thanks
    Laurie

    Hi Laurie,
    DVD 51032641 is the SQL 2005 installation DVD for SAP.
    You cannot download it from service.sap.com, you have to order SAP standard software (SAP NetWeaver, SAP ERP, etc).
    Best regards,
    Victor

Maybe you are looking for

  • How to get the number of pages when assemble pdf with DDX

    Hi,      I have tried to add two bookmarks to one pdf with DDX(in java code),      the first bookmark I shall add to the first page,and the second I shall add to the second page....     the question is:      If the pdf has only one page, I will not a

  • Is there a connection that i can use to plug my new i pad into a ion paino apprentice keyboard ?

    I have recently bought a new i pad. I have the ION PIANO APPRENTICE and it has an older connection, compared to the new i pad. Is there an adapter or a connection you can buy that will allow you to plug the new i pad into an older device ?

  • International calls. iPhone 4

    Hi. What did I not do? Just got back from Costa Rica- had checked with AT&T and was assured iPhone 4 would work there ( if I needed to make calls). No such luck. Phone detected the cellular network but still showed "no service". Is this a sim card is

  • Keyboard and mouse freeze imac

    Mouse and keyboard freeze multiple times a day. Forcing a restart is the only way to access computer when they do. They will work for a while after restart and do it again. Batteries replaced in keyboard and mouse. Mouse even switched with wired mous

  • Error coming - NOT ENOUGH MEMORY while opening MUS...

    Hi i have bought nokia 7210 supernova , error is coming NOT ENOUGH MEMORY while opening MUSIC PLAYER can any1 help me in ths plz