ERP integrator target applications greyed out

Hi all,
I'm configuring the ERP integrator within EMPA (to use with FDM later) but when registering target applications three of the four are greyed out.
I have tried to delete and refresh them, re-deploy and so on but they stay greyed out.
Can anyone tell me how to re-activate the target applications so i can select them again?
Thanks,
Marc

Hi All,
Did any of you had success in configuring FDM with ERPI. I am trying to configure FDM+ERPI for extracting data from Oracle Financials R12 and load it into an EPMA Planning application. When i go onto create a Metadata Rule and click on the Add Dimension button, the next page gives an error stating: There are no more dimensions remaining to be mapped under this application. and the dimension drop down in the target application area remains empty. Any idea why this happens? My Hyperion version is 11.1.1.3. I also downloaded and applied latest available patch of ERPI but no results.
Thanks & Regards,
Muhammad Jamshaid Nawaz

Similar Messages

  • Target registration in ERP Integrator in the Workspace

    Hi,
    I'm trying to integrate HFM 11.1.1.3 with E-Business suite R12 using ERP Integrator. Actually, I want to load journal entries from EBS in HFM.
    I've successfully registered the source (EBS) and I filled all the ODI details, but I can't register the target (HFM) as the "Target Application" field is empty although I've created application in hfm and in workspace.
    I'd appreciate any help.
    Thanks in advance.
    Ahmed.

    FDM is not required.
    The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
    Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
    Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

  • Application uninstall is greyed out

    Hello,
    I created three application which are loading only some batch files. I also created a batch file for uninstallation of these files. In these three installation I enabled the function "Supersedence". This will work for example APP 2 will be assigned
    then APP 1 will be automatic uninstalled.
    But now the option "Uninstall" in the Softwarecenter is greyed out. For all three Application!? Is it because I set up the "Supersedence" option? Or where I have to look to get this thing working!?
    BR,
    bad3m3ist3r

    Available apps can always be uninstalled, it's required apps that can't. This is an identified shortfall and I think that there is a DCR for this already. There are work around like creating a separate uninstall application or a package program
    that modifies the target system so that the app is no longer detected as being installed. These aren't perfect, but will work.
    Jason | http://blog.configmgrftw.com
    I´m sorry, I missunderstood your solution opposite.
    Any hint, why uninstall is gray for available apps? Uninstall command line is set correctly. It´s gray for all available apps. Apps deployment is done via AD security groups - user membership.

  • Application bar is greyed out under window menu

    Although I can see an application bar on my document, it is "greyed out" under the window menu. Specifically when I click the icon to arrange documents ie - tile vertically/horizontally - everything is greyed out

    Hi,
    Do you have a project open?
    if so double click on a sequence and the timeline should appear. Or start a new project if you don't have one open.
    DM

  • Software Center Application Uninstallation Button Greyed Out and Deploying an Application with Uninstall switch Fails

    Hi,
    I tried everything I could find on the internet but no luck so far. I can successfully deploy MS Visio 2013 to the clients. I also want to be able to uninstall it from the clients. On the client machine Uninstall button is greyed out. This deployment is
    installed as "Available" and there is only one deployment type within that MS Visio 2013 Application.
    I tried the following uninstall commands in my deployment:
    setup.exe /uninstall
    setup.exe /uninstall
    VisPro
    /config .\vispro.ww\uninstallvisio.xml
    “\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe” /uninstall VisPro /config "\\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml"
    \\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\setup.exe /uninstall VisPro /config \\SRVSCCM2012\Sources\MSApplications\MSVisioPro_2013_64Bit_ENG\vispro.ww\uninstallvisio.xml
    I checked Product ID from Setup.xml and I know it is correct. My uninstallvisio.xml' content is below:
    <Configuration Product="VisPro">
    <Display Level="basic" CompletionNotice="yes" SuppressModal="yes" AcceptEula="yes" />
    <Setting Id="SETUP_REBOOT" Value="Never" />
    </Configuration>
    Last night, I downloaded and installed Cumulative Update 1 for SCCM 2012 R2 and I haven't tried the deployment after the update,yet. I will try it today but please let me know what else to check.
    Yavuz Selim Atmaca

    After I updated SCCM Server and test client pc with CU1 , I tried to deploy visio as Required. It installed successfully. Then I uninstalled visio by deploying the application with Uninstall Action.
    After that I tried to deploy visio as "Available" to see if Software Center Uninstall button works. However visio deployment does not come to Software Center's Available Applications List. I check the status of the deployment under the Deployments monitoring
    node and it says Success "Already Compliant". I dont know what it means. Does config manager thinks that visio already installed?
    Yavuz Selim Atmaca
    2 or 3 hours later that -Succes "Already Compliant"- status of the deployment under the Deployments monitoring node is vanished automatically and Software Center application list showed the new deployment. I installed it and  uninstalled it succesfully.
    So, you are right Solution is the CU1 but I am still wondering why my available deployment took so time to be visible in Software Center althought I didn't enter any schedule to be available.
    Yavuz Selim Atmaca

  • Grey out an application for a person who already has filled the application

    Hi All,
    I have made an application which is prompts user to select various check boxes and fill text boxes. At the end of the form there is a submit button, which upon clicking inserts a record in database with that particular persons id.
    Now the issue is, how could I grey out the form so that next time the same user cannot fill the form. Right now I am able to display that, that person has already filled the form, but am not able to grey out the form.
    Please help me.
    Thanks,
    Verity.

    if there is a value in the row they are retrieving from the database to show they have completed data entry on the data, you can set the items in the region to be read-only.
    Each item has a section in the setup labeled Read Only Condition Type. In this you would select the Value of item in Expression 1 Equals expression 2. In Item one you would enter the item that has the value flagging the row as completed, and in item 2, you would be the value that shows the row is completed..
    Thank you,
    Tony Miller
    Webster, TX

  • Grey-out button dynamically in the application toolbar

    Hi,
    How can I grey-out button dynamically in the application toolbar?
    It's not an ALV grid, where it's easy.
    SET PF-STATUS '100' EXCLUDING 'SOMETHING'. hides completely the button.
    Thanks,
    Peter

    Hi,
    Sorry forgot to add something to my previous reply...
    The complete steps will be as follows :
    1. Create Two PF status , One with active Button and Function code and Second with Inactive Function code and Greyed button (This can be acheive by using Push Button assignment as specified in the thread)
    2. Dynamically change the PF status to Second one when you want to deactivate the specified Function from the application tool bar.
    regards,
    Sumeet Mishra
    Reward point if this helps : )

  • What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

    What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?  PC running XP and using the USB to communicate with the DAQ and driver boards.  Application generated with 2010.
    Thanks

    Hello,
    Usually default property is checked 
      system property -> devices ->usb root -> power management -> allow system to switch off device
    Hope this help
    Regards
    Tinnitus
    CLAD / Labview 2011, Win Xp
    Mission d'une semaine- à plusieurs mois laissez moi un MP...
    RP et Midi-pyrénées .Km+++ si possibilité de télétravail
    Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
    Don't forget to valid a good answer / pensez à valider une réponse correcte

  • Greyed out Application folder in Workshop

    Hi,
    I'm working on an application using workshop 8.1 sp4
    i've had to develop the application in a number of different environments - so I've amended the application properties each time.
    This has been working fine. Just recently though the Application Folder - is greyed-out and when I do a build it doesn't update the server.
    Has anyone seen this before? Can you help
    Thanks
    Tariq

    Hi,
    never seen thisone, probably some ill-formed files somewhere. Try to see in the workshop log for details.
    - Anders M.

  • Applications with two deployment types makes uninstall button in software center "greyed" out.

    Hi
    SCCM 2012 R2 running on Windows server 2012 with Windows 7 clients.
    We are publishing applications to users that are available (not required), so that they can be downloaded from the application catalog web site. We have som applications that needs more then one deployment type (different pre requirements depending
    on OS architecture) and when I create two deployment types for one Application the uninstall button in Software center is greyed out? If i remove one of the deployment types so there is just one, well then the Uninstall button is available again.
    An example is Itunes. I publish one Itunes application to the store that has two deployment types, one for X86 and another for X64 with requirments on OS architetcure. the correct version gets installed but the uninstall button is not possible to use. If
    i remove one of the deployment types then the deployment button is not greyed out.
    Is this a bug?
    Thanks everyone. 

    We will be installing CU3 this Friday. During the next week or so, I will deploy the CU3 client to the workstations.
    I do not believe that the uninstall button issue will be addressed with this update either, according to what I have read so far.
    If, by some small yet profound miracle, my uninstall button regains full functionality, I will gladly let all of you know.
    I would hope that Microsoft would address this issue seriously, as I am sure the rumblings of dissatisfaction are beginning to grow louder with each passing CU that ignores the problem.

  • IPhoto download is stuck - cannot get it to resume. The "Pause" button is greyed out and to the left of that is the word "Waiting". I tried putting the iPhoto download into the trash (from the Applications folder) but am unable to do that - it goes r

    My iPhoto download is stuck. To the right, there is a greyed-out "Pause" button, and to the left of that, the word "Waiting".
    I tried putting the iPhoto download into the Trash (from the Applications folder) but it won't stay in the trash - just keeps popping back into the folder.
    Have looked all over online and tried lots of things but no luck. I don't even know where to ask.
    Thanks
    (P.S. This all happened after a disaster: My hard drive crashed while downloading Yosemite - hard drive was only six months old. Replaced hard drive and now in process of restoring things.)

    Go to the LaunchPad and cancel the download - trash the iPjhtoo application and reinstall from the App store
    LN

  • Application Icon Greyed out

    I restored my computer today. I decided to go to finder and my applications folder is greyed out. I am still able to access my applications through the dock but i cant acess it through finder. Can someone please suggest how I can fix it. Here is a picture of my problem

    OS X isn't prefect despite Apple's claim it is The Most Advanced Operating System in the World.
    Just one of those glitches encounter in every OS ever released.

  • UC Integration for Lync - Show my video automatically is greyed out

    In a copy of CUCILync set to use desk phone for calls, if I select Video in Options the tickbox for 'Show my video automaitcally' is greyed.  If on a call the option for 'Add video to call' is greyed out also.  However if I switch CUCILync to softphone mode, video works perfectly.  I've checked the config of the IP phone in CM and the Extension mobility Profile and can't spot anything that looks wrong for this user.  Can anybody suggest what the problem might be please?
    Thanks

    As an update, I have tried this with various Windows 7 PCS, both 32-bit & 64-bit and various cameras including VT Camera II & VT Camera III.  All the PCs have CUCILync v8.5 installed.  All of the Windows 7 64-bit PCs show this behaviour, no matter what camera is used.  All the Windows 7 32-bit PCs work fine.  All of the cameras work fine in Windows 7 64-bit with other application, including Lync native video calling itself.  My conclusion is that CUCILync 8.5 on Windows 7 64-bit has a problem with video.  Can anyone else confirm this?

  • ITunes Application Tab Greyed Out

    i got a new computer with windows 7 64 (my original computer was vista 32) and reinstalled itunes and reconnected my ipod touch. now when i connect my ipod the applications on my ipod are all greyed out and i can't access them. do i need to go on my old computer and move the files over that i had downloaded before before i can sync it? I have the latest ipod touch with updated software.

    figured it out

  • HT2476 Applications Folder is greyed out

    I just noticed my applications folder from the root menu is greyed out and can't be opened.  I can open it from the dock.  But I can't access it from the hard drive or through favorites in finder.  Any suggestions?

    I have the same exact issue. I started a thread on this and someone's already helping me. Check it out:
    https://discussions.apple.com/message/19095370#19095370

Maybe you are looking for

  • Creation of delivery when sales order is saved through VA01

    Hi All We got the requirement in such a way that we are creating sales order of type (ZOR -standard order ) . Configrration is donde in such a way that when the order is saved one dilvery will be created for that order of deilvery type ZLF .as this i

  • Case Statement in sub query

    Hi, I have two issues, here is my initial code: select cc.name_id_no ,cc.discover_date ,cc.cla_case_no ,max(rl.year_of_incident)Non_Loss_Past_5 ,rl.timestamp from cla_case cc, rbn_loss rl where cc.name_id_no = rl.customer_no and rl.year_of_incident <

  • No Standard  Receiver Agreement found

    Hi all, I have configured a scenario between a Business System and Business Service . As we tried to test the Configuration scenario using Test Configuration Tool, it gives the following error in the Receiver agreement. Sender Business System : M1S_0

  • All burned discs are coming up blank.

    Hi So I've burned some DVDs and after it is done it refuses to believe there are any files on it. The reflective side shows that difference in colour in the areas used and it takes its time burning and verifies afterwards so the files are there. I've

  • CS4 - Is it possible to disable the application frame?

    I have been cursing and hating the application frame in Windows for the last month, but now I get my hands on the Mac version, I'm discovering my days of cursing have only just begun it seems. In the Mac version of InDesign/Photoshop/Illustrator they