ERP invoice with reference to SRM Basic Contract?
Hi
In SAP SRM you can create a shopping cart or a PO with reference to a SRM Basic Contract by setting the item number to 0 like: 4700000107/0
But with the new Ehp1 SAP states that ERP invoices can be created with reference to a SRM central contract (via SRM_SERVICE_PROC_1). But can you create the invoice with reference to contract item 0?
The idea is to have the non PO related invoices registrered on the basic contract in SRM along with the PO's. A basic contract can't be copied to ERP, as there is no lines on it, but is the ERP contract copy needed for this scenario?
So two questions:
- is the ERP contract copy from SRM needed to use the Ehp1 functionality of creating invoices with reference to a SRM contract?
- can the ERP invoice be created with reference to a basic SRM contract by giving the contract item as 0 or in another way?
BR
Jacob
Hello,
With SRM 70 EHP1 you can create ERP invoice against your SRM Central Contract distributed to ERP.
To enable this you need to do few settings in ERP, for the same you can refer to the config guides available at Service market place for SRM701 releases.
Configuring Contract Handling for Invoices : You use this procedure to configure contract handling for invoices in the SAP ERP system. You have activated the Procurement - SRM Integration 2 (LOG_MM_P2PSE_2) business function in the SAP ERP system.
Steps :
1. In Customizing for SAP ERP, perform the activity under : Materials Management -- Logistics Invoice Verification -- Incoming Invoice -- Activate Direct Posting to Contracts , to allow direct references to contracts when creating invoices and parking documents.
2. In Customizing for SAP ERP, perform the activity under : Materials Management -- Logistics Invoice Verification -- Invoice Block -- Set Tolerance Limits , to set the tolerance key for contracts (PC: Price variance for contract).
The feature is termed as Invoice Reconciliation here.
Best Regards,
Rahul
Similar Messages
-
Invoicing without reference to PO and contract?
Hi all,
We are implementing Invoicing without PO (direct to contract) in SRM 7 with ECS and ECC Ehp5, with the functionality Central Contract Management.
While testing this scenario, we noted that:
- It's possible to create invoices with no reference to any document at all, which includes contract and PO. In our scenario the selection of a contract would be mandatory, and by filling the contract all the associated fields would be filled in invoice.
- When we create an invoice, with reference to contract, in ERP side no invoicing document is created at logistic side, only at financial side (document type RE). In our scenario the invoicing document would be created at both sides.
Is it normal to get these results? The results that we anticipated in our scenario are viable to implement?
Thanks in advance.
Best regards,
João SalgadoHello,
João Salgado wrote:
We are implementing Invoicing without PO (direct to contract) in SRM 7 with ECS and ECC Ehp5, with the functionality Central Contract Management.
This means MM module is implemented?
If MM is implemented, it is not possible to post billing without reference to MM document directly in ECC (MIRO transaction).
João Salgado wrote:
- It's possible to create invoices with no reference to any document at all, which includes contract and PO. In our scenario the selection of a contract would be mandatory, and by filling the contract all the associated fields would be filled in invoice.
- When we create an invoice, with reference to contract, in ERP side no invoicing document is created at logistic side, only at financial side (document type RE). In our scenario the invoicing document would be created at both sides.
On ECC side, for me, creation of MM invoice in direct reference to a contract (this means, without a PO) is not possible. Maybe enhancement package covers this need?
So, i guess you use Central Contracts?
Regards.
Laurent. -
Invoice without reference in SRM not viewable in R/3 controlling
Hi All,
I am on extended classic scenario in SRM 4.0. When I post an invoice without reference to a PO in SRM, the invoice gets created in R/3. However in R/3 when I view these entries in controlling reports such as transaction KOB1 or KSB1, I am unable to drill into the line items to display the document. I get the error message "Original document is not in the local system".
This seems to be only for controlling reports, as I can drill into the line items in finance reports such as FB03.
I have applied note 682441 in R/3, but still face the same problem.
Can anyone tell me if they have the same problem?
Thanks,
Paula.Hi Paula,
Sorry to intercept.
I am facing an issue while creating the Invoice without reference to PO. My system is SRM 5.0 with Extended Classic scenario active. May I request you to share your insight on the settings to be made to achieve this functionality.
Also, I would be glad to have few words on creating the invoice with reference to local SRM contract.
Thanks in anticipation. -
Excise Invoice with reference to Commercial Invoice
Hello Experts
My client has third party software. In SD- Order to Invoice cycle is done in that software.
After Invoice is created the data is interfaced and Invoice is received in SAP.
Now my doubt is that will it be possible to create the excise invoice with reference to this commercial invoice.and if so, what should I assign in config- Assign Del types to Invoice Types.
Please advice.
Best Regards
RaghuHi
Your scenario is not very clear to me although i am trying to attempt for the solution. Generally F2 invoice will take care of commercial *** excise invoice requirement. If material is excisable & attracts commercial taxes like CST or VAT you can geit through F2 invoice. You can have print programme developed for the invoicing where heading print will be like "Commercial *** excise invoice". -
Creating a Invoice with reference to another invoice with new pricing proce
Hi People,
I want to raise a supplimentary excise invoice for the differential price.
I want to do it by raising a supplimentary commercial invoice with reference to the old invoice but with a new pricing procedure assigned to it.later on raise the supplimentary excise invoice with Tcode j1iin wrt the new commercial invoice.
Although i have done all the necessary configurations such as determination of new pricing procedure, Doc pricing Procedure and changing the pricing type at the copy control settings of the item category to "B".
i am unable to get the new pricing procedure when i am creating the supplimentary commercial invoice.
Can u people suggest me in this regardDear Nagabhushan
Normally for price difference, there is an order type RK for "Invoice Correction Request" which should be created in reference to F2 billing document. Based on this, you can issue credit memo (document type G2).
This being the case, you cannot create supplimentary invoice with reference to original invoice. Moreover, for all excise related adjustments, you should not use j1iin. You should run j1ih - Other adj.
thanks
G. Lakshmipathi -
Single Invoice with reference to 2 Sales Order
Hi,
How can i make a single billing invoice no (vf01) with reference to 2 sales order?
billing plan has been maintained from each sales order,we dont have any pgi process.
so process is sales order->billing plan-> invoice
my user want to generate single invoice with reference to 2 sales order - same customer no.For processing billing due list (VF04) - The system combines documents with the same customer number, proposal billing type and sales organization, and attempts to include them all in the same billing document. If the preconditions are met, then a single invoice is created for the deliveries and/or orders.
To do a collective billing. Collective Billing Documents
The selected documents in the billing due list are billed. The system tries to combine them as much as possible. Processing of the selected documents is carried out in the background. After processing of the documents, you return to the billing due list. The sysytem will indicate whether or not a document has been billed successfully.
If successful, then Save
You can also carry out a simulation of billing. In this case, select Simulate. The system simulates the collective billing / online function described above.
-After the collective run you can display a log for the collective run. This displays possible errors during billing.
-You can also branch to the resulting billing documents, in order to carry out a split analysis.
-The billing documents of a collective run can also be canceled.
Re: VF04
Hope it assist you.
Thanks & Regards
JP -
How to create excise invoice with reference thorugh credit memo
Hi All,
Please provide any solution for the following qurey:
How to create excise invoice with reference thorugh credit memoHi murali,
i am unable to understand your requirement i think there is no like this scenario requirement for any client
if any requirement is there kindly explain detail
cheers -
How to create excise invoice with reference delivery document
hi all sd guru
please guide me how to create excise invoice by taking reference of delivery no.
thankx in advance
sanHI
FACTORY SALES
IN CASE OF FACTORY sales you have to create a billing document either Proforma or Commercial.
Then you can reference the billing doc i9n J1IIN for creation
DEPOT SALES
In case of depot sales you can create a excise invoice with reference to delivery document.
For this after creation of delivery goto J1IJ and slect the rg23d from menu
you can create an excise invoice with delivery in depot sales.
In factory it is not possible to create a excise invoice with delivery doc.
regards
Prashanth -
Problem in generating excise invoice with reference to commercial invoice
Hi,
I could able to generate excise invoice with reference to STO ( jex ) invoice but unable to generate with reference to commercial invoice ( F2) .System is show 'error in creating FI document'. Am i missing some configuration.
Please advice
Thanks
satyaHi
Check the G/L accounts assignments for Excise transaction types DLFC,
Also check the NUmber ranges in OBA7, and also the accounting doc type for excise invoice
regards
Prashanth
Edited by: Prashanth@SD on Feb 3, 2011 8:27 AM -
Excise invoice with reference to credit memo/debit memo
Normally we create Excise Invoice with reference to Inter company Invoices . Is it possible to create Excise invoice w.r.t. Credit Memo/ Debit Memo. If Yes , then what are the settings that needs to be maintained and where?
Excise JV thru J1IH transaction is one option. It gives you 6 options.
1.Material Doc for written off
2.materail doc for non production
3.Additional Excise
4.Other adjustments
5 TR6 Challan
6.Cacel Excise Invoice -
Excise Invoice with Reference to Delivery
Hi,
i want to create Excise Invoice with reference to Delivery *without creating "JEX"*(Proforma Invoice)
OR->LF->J1IIN->F2 ie. Commercial Invoice after Excise Invoice. is it possible?
Regards,
AmolHello Amol,
you can create with reference of the deliveyr document. in J1iin trnsaction you have the option in the header tabs of create from delivery
enter the delivery and create the excise invocie
Hope this helps
Thanks
akasha -
List of PO with reference to a specific Contract
Hi,
Anyone knows if exists any standard transaction where one can see the Purchase Orders created with reference to a specfic Contract, or if I have to creat a query to do so?
Best Regards,
Pedro MarianoThanks Shiba, but I want to see is the PO made with reference to a specific contract, so what have to be my input is the contract.
I checked t-codes ME3L, ME3M, ME3C and ME3N, and in no one of them did I find the connection between contracts and PO's.
Best Regards,
Pedro Mariano -
Invoice with reference to SalesOrder
Hi,
in SQL Table INV1 i can see information like BaseRef=10000, BaseType = 17, BaseEntry = 1 etc.
How can I Import invoice via XML structure with a BaseRef?
In our scenario we have invoices with reference to order.
Thank
KayI solved it:
BaseRef will be filled automatically.
in XML I defined only <BaseEntry> and <BaseLine>
Another important Point: <CardCode> <LineNum> and <ItemCode> in invoice sould be the same as in order!
Best regards,
Kay -
How to create item wise invoice with reference to sales order.
Hi ,
Please let me know how to create item wise invoice with reference to sales order.
Ex : Sales order has 2 line items .
When creating invoice system should create two invoices for each line items.
I have tried with copy control but I am not able to do it.
Please advise.
RegardsHi,
Please let us know your exact requirement. Whether you want it to be fixed like only one line item to be billed every time ot it to be based on selection you do every time.
As per my understanding it should not be fixed and in that case it should like as follows,
In VF01 you will select Del. document/S.O. number and click on selection list and will take you to next screen as mention below,
and select desire line item to be billed and click on copy and will take you to billing screen.
Regards,
Ajit K Singh -
Bapi to create Invoice with reference to SalesOrder
Hi All,
I want to create Invoice with reference to SalesOrder ,
can anybody help me regarding
--> what is the Bapi to Create Invoice with reference to SalesOrder
--> what are the import parameters
Thanks in Advance
Regards
SrinivasHi Giuseppi,
Thanks to your reply,
i have used BAPI_BILLINGDOC_CREATEMULTIPLE , i have given the following input values in the BILLINGDATAIN
-- salesorg,distrchan,division,doc-type,sold-to,plant,material,doc-number,item-number , when i execute the Bapi , i got the DocNo:0090021983 , but i did not find that DocNo. by executing the Bapi BAPI_BILLINGDOC_GETLIST.
i found the short description for
BAPI_BILLINGDOC_CREATEMULTIPLE -- is for Individual Customer Billing Document, is it the correct Bapi to create invoice
what is the correct Bapi to create invoice based on the salesorder.
RV_INVOICE_CREATE OR GN_INVOICE_CREATE OR BAPI_BILLINGDOC_CREATEMULTIPLE.
Can u specify the import parameters for that Bapi.
Thanks & Regards
Srinivas
Maybe you are looking for
-
The first thing i'm doing is to get from my ftp server all the ftp content information and i tag it so i can identify later if it's a file or a directory: private int total_dirs; private int searched_until_now_dirs; private int max_percentage; privat
-
BIG PROBLEMS WITH IPHOTO AFTER MAVERICKS DOWNLOAD
Hi! I´ve read all about iPhoto and mavericks problem on diferent questions and answers around Communities and done every one of the suggestions and still can't fix it, I´vd already erased iPhoto (hoping my photos are alive, if not im dead!!!) so that
-
CST-Material Cost Picking High value in MIGO
Hello Gurus, My Client facing a issue in value difference while posting GRN. Materials Cost value picked higher value for different GRIR in same purchase order. Scenario : We are Using TAXINJ Procedure - For a PO we entered Tax Code, which include E
-
Remove workbook template after migration
Hi @ll, we have migrated all our workbooks fom 3.5 --> 7.0. In 7.0 we have created a new workbook template. How can I remove the old template from the workbook and replace it with the new one? Thanks in advance.. Regards, Flo
-
HT3702 I apparently ordered an Adobe program by mistake. How do i get it corrected?
I apparently ordered an Adobe program by mistake. How do I get it corrected?