ERP system to accept tickets from more than one source
I have the following scenario.
My back end ERP system accepts tickets from my EP. The EP cert is imported into ERP.
I want to enable SSO between CRM and ERP. CRM does not interact with the EP.
Can I have more than 1 certificate imported and added to the ACL in my ERP system(i.e. from my EP and ALSO from CRM)?
Many Thanks,
Derek.
Yes. We have portal and another standalone java instance doing SSO to ERP.
-RK
Similar Messages
-
How to load an infocube from more than one source system?
HI all,
Can u please tell me how to load an info cube from more than one source sytem?Hi,
same confiig is required for one or more source system. (From Data source to update rule, obviously cube remains the same).
Its the infopackage execution which loads the data from different source system.
Regards,
Nawanit -
Can a master data will have loading from more than one data source
Dear gurus,
I have a master data object which has every day loading from one particular data source. Now I got a requirement to load data from another data source. If we load data from more than one data source , will there be any problem with data? Will it accept loading from more than one data source.?
Regards
RsHi Ram,
We can load the data to target morethan one datasource.Thats advantage in BI compare to BW. It will accept loading from more than one datasource.but you have to take care about characteristic and attributes are the same in both datasources like that.
Regards,
SVS -
JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC
Hi,
I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
Regards
KumarHI,
Yes it can be possible ,please see the following links
JDBC Receiver with Oracle Stored Procedures
configuring jdbc adapter with multiple tables
RFC -> XI -> JDBC Scenario Updating Multiple Tables
/people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
JDBC Adapter multiple Selects
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
Regards
Chilla.. -
Can Insosource be fed by more than one source system
Hi
Can Insosource be fed by more than one source system?
One from R/3 and other from flat file?
Its urgent?You can have multipple source systems to the same infosource and load them through separate infopackages.
Create a new infosource for flat file and assign it to the object ... ,
it is very similar to how you would do it for an R/3 source , but here there will be no datasource to choose froim since it will be a flat file.
Arun -
opening hotmail in firefox: Please refresh your browser window, When you access your Windows Live Hotmail account from more than one computer, we ask you to sign in again to help keep your account private and secure . Refreshed but no change. in Safari no problem
Go to '''Options '''on Firefox Browser-->'''Advanced'''-->''Click on'' '''Network '''tab-->''Select '''''Settings'''-->''Select '''''Use System Proxy Settings
''' -
On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.
If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/ -
Can I have in one iphone 5 music from more than one itunes accounts? My daughter and I have our music in the same pc. She and I have iTunes accounts. I have not been able to load in my ophone with my itunes acct music that she purchased in her account. I have not been able to do this. Thanks
iTunes Match is not sharable across Apple IDs. The best way to get the music on her iPad is to leave hers signed into her Apple ID on the iTunes Store and sync via USB.
-
Reporting from more than one infocube and also from multiple ODS
Hi all,
Someone please help me in these issues.
How can we do reporting from more than one cube ( if data in all the cubes are required, but only a few fields from each cube). And how to do the same with more than one ODS.
Thanks in advance,
SekharHi Sekahr
Can u jus create a multiprovider.
Before creating the multiprovider..Just check the Common charcterstics avilable in
all the ods based on that give the mapping ..
and then once u have completd the creation of multiprovider execute the same in
the tcode <b>Listcube</b> and then create the querys as per the user thats it...
Regards
R M K
Assining points is the only way of saying thanx in SDN *** -
Can takes from more than one track be comped at the same time?
Greetings,
I know that this question has been asked recently in this forum (http://discussions.apple.com/thread.jspa?messageID=9527542�), but I don't think that the respondents completely understood the question... Or perhaps I did not understand the suggested solutions to the problem. I will ask the question in a slightly different way...
Suppose that I record guitar with 2 microphones (a pickup mic, and a room mic). The first microphone is recorded onto track 1, the second microphone is recorded onto track 2. Multiple takes are done in this manner. When it comes time to comp the tracks, how is it done? Can the takes from more than one track be comped together at the same time? I have tried to do this by grouping both tracks together, but it does not work.
Any suggestions?
Thank you.You had the right idea grouping the tracks together. You must make sure that in the group settings, the box titled "region selection (edit)" is checked. This will allow you to make the same cuts (or in this case, swipes) on all regions in the group.
-
My itunes library has organically grown from more than one itunes account (all paid for by me) but all now on a separate computer. If I upgrade to iTunes match will I have to pay for each account or just once, for the computer?
No. Provided the computer that you use to upload / match your Songs is authorised to play all of the Songs all works well - once complete you can download Song files that will play on your libraries / other computers without each computer having to be authorised.
-
How to pull groups from more than one OU using weblogic "All Groups Filter" from AD.
Hi,
Please help me for pulling groups from more than one OU using weblogic "All Groups Filter" from AD.
AD structure is:
c001639domain.local
||
||
OU=Security_Groups
||
||
>> OU=CORP_ECM---> n number of group
>> OU=CORP_hodata--> n number of group
>> OU=CORP_citrix--> n number of group
>> OU=CORP_driver --> n number of group
>> OU=CORP_temp --> n number of group
Requirement is i want to filter groups from OU=CORP_ECM and OU=CORP_hodata.
Thanks,
Jagan.I used below option but its not working getting zero groups.
(&(objectClass=group)(|(ou=CORP_ECM,dc=Domain,dc=com)(ou=CORP_hodata,dc=c001639domain,dc=local))) -
How to from more than one delivery note - conversion into one invoice
Dear Experts,
How to from more than one delivery note - conversion into one invoice?
Thanks and best regards,
Wilson HongDear Wilson Hong,
Single invoice for multiple deliveries will takes place based on these criterion
1.If you want single billing document for multiple deliveries these data should be same in all order for all items.
-> Payer
-> Inco term
-> Payment term
-> Actual GI Date from Delivery
-> Shipping Condition
-> Account Assignment Group
-> Exchange rate (in case of export sale order)
-> Foreign trade data.
2.In addition to this you need to maintain proper copy control settings between delivery and invoice.
Go to VTFL transaction input your delivery type and invoice type then go in to the item level settings here you find field Data VBRK/VBRP maintain this field with routine 3-Single invoice.
If the above data and settings are exists you can do single invoice for multiple deliveries.
I hope this will help you,
Regards,
Murali. -
How can I put more than one source file when I am creating my installer from LV 7 Express
Hi,
I am creating my installer for my application and I would want to add more than one source file at once, how could I do it?
Thanks,
ToNi.Hi,
I'm referring to the first executable. In other words, I have my application and I want to build and executable of it. Then I go to "Tools->Build application..." and then in the source files tab I can add my vi files but I want to add more than vi at the same time (at once) and not one by one. How can I do it?
And my second question is: When I make the installer for my application I save the configuration in a build Script file (.bld) in order to use it whenever I want. Then If from another computer different from the one where I generate the .bld file, I load it, LV tells me that something is wrong (LV says there are some errors in some VIs but It doesn't tell me what files are). Why?
Thanks in advance,
ToNi. -
Need to download JAR files from more than ONE HTTP-server ?
Hello,
We have a need to download JAR files for an application, from more than ONE HTTP-server, i.e. any specified HTTP-server in an extremely secure network.
Does a solution exist for this requirement ? Is it possible to design a solution our selfes for this problem ?
Best Regards
PeterWe have a need to download JAR files for an
application, from more than ONE
HTTP-server, That can be done using the extension element
from within the resources element of the main JNLP.
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/syntax.html#resources
The extension element should refer to another JNLP
(on the other site) that refers to the Jars. The jar files
in any such (foreign) JNLP need to be signed, and the
JNLP files should declare itself as a <component-desc>.
For any level of detail on using extensions/components,
download the spec. mentioned in the second paragraph
of that section linked above. Unfortunately I can find no
web browsable form of the information.
Here is an example though..
http://www.javasaver.com/testjs/jws/04/glclock.jnlp
This (sandboxed) screenaver demo comes off my
javasaver site. It refers to the JOGL API via an
extension element in the JNLP, that points directly
to the JOGL site. You might notice the security
warning that is produced mentions..
Name: JOGL
Publisher: sun microsystems, inc
Source: https://jogl.dev.java.net
..i.e. any specified HTTP-server in an
extremely secure network. I do not know about an extremely secure network,
but if it is OK to launch a normal JNLP for an
application with a 'main()' from the server, I guess
it should be OK to launch extensions off it - you
might need to set up some tests.
Maybe you are looking for
-
Hey I had my Mac for awhile now (Mac Mini) and I just upgraded to Leopard a few day ago. I'm having problems transferring loops onto the loop index..I tried the drag and drop and sometimes only a few get through but not all. And when I try again a pr
-
Problem in exchange data using Bean
Hi all, I have a problem when creating a portal application. I've done through the steps described in this link: http://www.ajvic.es/irj/portalapps/com.sap.portal.pdk.htmlb.htmlbmanuals/docs/dynpage-01.html In this example, I use bean to exchange dat
-
Macbook insomnia (doesn't sleep)
So. My MacBook doesn't go to sleep anymore if I close the lid. Wel, not automatically, I can just put it to sleep, close the lid; and then it'll stay in sleep mode; but it still is annoying and just want it to sleep if I close the lid. Any suggestion
-
How to start an executable program from a java program ?
Hi, does someone know how to start an executable program from a JAVA program ? Thanks, Fred.
-
I bought an iMac from a client and I'm concerned that the software that is on the system is not secure. I would like to remove everything and start with factory default programs and settings. The system is about 3-4 years old and there are no origina