ERP Transaction Launcher leads to blank screen

Hello
I followed SAP notes and various threads here at SDN to setup launch of ERP transactions from CRM webclient.
In principle I have applied SAP notes on ERP and CRM for IC_LTX and IC_LTXE transaction codes and also did all steps as per enclosed blog,
/people/vikash.krishna/blog/2008/09/23/crm-2007-how-to--2-a-transaction-launcher
However when I launch the transaction, I get SAP Logon prompt from ERP server as expected. When I enter credentials correctly, I get an embedded window with SAP GUI menu (only two options Menu and System and field to enter Tcode) and empty screen area .
Now if I enter he tcode in opened empty window say "/nva03" , I am able to start the transaction.
Any clues on why the transaction does not launch correctly?
Thanks

Hi,
I get the same problem, but it gets back to CRM. I think the problem is that http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?*transaction=IC_LTXE*&okcode=ICEXECUTE
transaction=IC_ICLTXE should be replaced by the transaction ex: VA01 and it is not.
Tell me if you have any clue.
Tx
Thomas

Similar Messages

  • Transaction solman_workcenter displays a blank screen

    Hi,
    When I execute transaction solman_workcenter it displays a blank screen. There is no error message.
    Is there some setting that is missing.  Please advice.
    Regards
    Phanidhar

    Hello,
    has your user the acording workcenter roles (SAP_SMWORK*)?
    regards
    Christian

  • Report Designer: execution of report leads to blank screen

    I've created an report in the Report Designer, and want to test it in the portal. To this end, I choose "Execute" from within the Report Designer. This opens my portal, but after logging on there's nothing displayed on the screen (it remains blank).
    How can I execute my report so that it's result is displayed correctly?

    I had the same problem and just resolved it.
    Found that the Default template was not set correctly in SPRO.  The template selected was 0ANALYSIS_PATTERN which is the template that is used by the Analyzer.  The correct Template to use is 0REPORT_DEFAULT_TEMPLATE.
    This is set by going to Transaction SPRO.  Navigate to SAP Netweaver > Business Intelligence > Setting for Report and Analysis > Bex Web > Set Standard Web Templates .
    Change line that says Enterprise Reporting from 0ANALYSIS_PATTERN to 0REPORT_DEFAULT_TEMPLATE.

  • Plugging in r9 270 gaming 2g leads to blank screen

    Dear everyone!
    I used to have a clue how to build computers, but it seems I have grown old and it has been quite a while since last. Anyway, I recently bought some parts and assembled a computer. The main parts are:
    128GB SanDisk Pulse, 2.5" SSD 7mm S       
    Intel Core i7-4770K, 1150, Haswell,       
    Asus Z87-PRO, Intel Z87, S 1150, DD     
    650W Corsair RM Series CP-9020054-U   
    2GB MSI Radeon R9 270 Gaming 2G, 28     
    plus some old 2x8gb corsair ram sticks.
    I plug in everything including the r9 and turn the power on. The screen is blank regardless of whether the hdmi cable is plugged into the r9 or the motherboard. The motherboard q-code (very basic error checking) implies everything has gone fine, and I can hear the dvd with the windows dvd spin up to read and stays on spinning. Very odd, so I turn the computer off and after a while decide to unplug the graphics card. I turn the computer on, screen works, I install windows. I figure maybe it was a driver issue and now with windows, perhaps it will work better? I turn the computer off, plug in the card, same issue. I don't even see the bit where it tells me what key to hit to enter bios.
    I have a feeling I am missing something very simple here, but googling has not worked this time. Anyone out there who can advice me? I do not have a spare computer to test it in, or any spare parts at all for that matter.

    Quote from: flobelix on 21-January-14, 03:55:48
    Try without the R9 just using the integrated gpu. Does it work then?
    Yes. The card currently sits in the box it came in, the HDMI is plugged into the motherboard, and I am using the computer to type this post.
    If I plug the card in, I cannot even see "press del to enter bios", screen just stays blank.
    To clarify what cable goes where. The PCIe cable goes into graphics card, it has 6 holes matching the 6 pins. Seperate end with two holes is floating about. The other end has 8 holes and fits the 8 pin 6+2 PCI-E slot on the PSU.
    I am struggling to understand " Are you trying to use a PCI-E power connection to the ATX/EPS CPU power connection header???? It needs to be the ATX/EPS 4X4 or ATX/EPS 8-pin PSU cable to the mainboard CPU header."..  The CPU is running just fine, as is the rest of the motherboard, I believe, as I am typing this. The 24pin goes to one part of the motherboard and 8pin to another (closer to the CPU), but as I said, this does not seem to be the problem. Problem is that putting the graphics card in and giving it power means that onboard graphics stop working and msi card is not working either.

  • When I launch the cloud app (windows 8.1) all i get is a blank screen.

    When I launch adobe cloud app all i get when it launches is a blank screen.  I have tried uninstalling and reinstalling from the adobe site and have also renamed the OOBE folder but to no avail.
    What is wrong with the app.  It was working fine until recently.
    Thank you
    Kathy

    Hello KathyT2013,
    Please rename OOBE Folder from the following location:
    Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
    Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
    After renaming the OOBE folder please restart the machine and then launch the application once again.
    Do let me know if it work or if it gives you any issues.
    Thanks,
    Ratandeep Arora

  • Transaction launcher displaying blank screen (Empty without any fields)

    Hi Experts,
                       Recently we have done the upgardation from CRM 2007 to CRM 7.0. In our old version we have configured Transaction launcher and everything was fine. But we are facing an issue with transaction launcher calls in our new system. Apart from the existing TL  configuration below are the steps did in the new system (after upgradation).
    1. Activated the Webgui ITS service from the path sap/bc/gui/sap/its/webgui in the remote system (ERP) through SICF.
    2.Published the internet service SHUFFLER, SYSTEM, WEBGUI through SE80 in the remote system.
    3.checked the configuration for logical system in transaction CRMS_IC_CROSS_SYS and the URL of ITS is in the form of
       http://<host>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXEokcode=ICEECUTE
    Till this part every thing looks fine and if execute the URL in the browser, it is taking me to the ERP system login screen and i am able navigate to any transaction.
    But if i login to CRM interaction center and clicking on the TL links, its not displaying any login screen( Remote system) and not even displaying any message or any fields. Its just displaying a blank screen (White Screen) in the same window.
    Please provide your valuable suggestion to resolve this issue. Thanks
    Regards,
    Laxman.P

    Hi,
         sorry, it was a typogrpahical error in my query. I have mentioned the correct link in my customization
           http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
    Regards,
    Laxman.P

  • Transaction launcher gives blank screen

    Hii All
    I have configured a TL to launch Tx. - crmd_order(CRM)  but it displays a blank screen.
    I have already tried the following (by referring to SDN posts) :-
      1.  Notes 1620007 and 1521043 are already implemented in our system.
      2.  Maintained proper URL in CRMS_IC_CROSS_SYS. It is wokring fine when opened directly in IE.
      3. Activated and tested the relevant ITS services (SICF).
      4. In sicf service, the  SAP implementation area is selected as "Signature Design" ( from the posts i found that if thevalue          is "Netweaver Classic" then the blank screen issue  comes).
      5. Executed the report to publish ITS services : SIAC_PUBLISH_ALL_INTERNAL.
      6. Executed BOR object in swo1. It is wokring fine.
    But it still displays the blank screen. Please suggest some solution or the step which I am missing.
    Thanks in advance.
    Shafali

    Hi Shafali,
    You can find the detailed steps of implementation here:
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3059fb20-987f-2e10-ef82-d147b9b5e8b4?QuickLink=index&overridelayout=true]
    Regards
    Leon

  • Transaction Launcher - TCode Authorization Issue for ERP transaction

    We are trying to implement an ERP transaction in the CRM WebUI via the transaction Launcher.  Everything has been set up properly and the transaction appears in the nav bar.  I am running it to launch a new window.  When i click on it, a new window pops up, with transaction IC_LTXE and an error saying
    *"You do not have authorization to view transaction ZSD_IC".*
    Everything seems to be set up properly and we can access the transaction with the same user id in ERP. He has SAP_ALL.
    Does this have anything to do with IC_LTXE?  Is there anything special i need to do to assign proper authorization to this user.
    Thanks,
    jeremy

    Hello Jeremy,
    We are trying to execute R/3 transaction from Transaction Launcher but we are facing problems.
    In order to execute transactions from TL we have copied object TSTC to ZTSTC  in both systems and use the method Execute to be used from Transaction Launcher customizing. Then we have customized T. Launcher in order to get two links, one to R3 transaction  (using the object ZTSTC, method execute and XD03 as value parameter) and one to CRM transaction (using the object ZTSTC, method execute and CRMD_MKTDS as value parameter).
    When we execute the TL link to CRM, transaction works properly through ITS, but executing the link to R3 transaction we receive the following popup message:u2018Logged Off Successfully. You have been logged off from SAP NetWeaver Application Server.u2019 the screen gets in blank and no further actions are executed.
    In order to correct the fail we have implemented these notes, but the problem still remains.
    0001224663 Launch of Front Office with Transaction Launcher fails
    0001263716 Launching Front Office Process using Transaction Launcher
    Based on your experience could you help us to get the right configuration to reach R/3 transaction through Transaction Launcher.
    Thank you very much in advance.
    Best regards.

  • My mail app quits a few seconds after launching. I get a blank screen and then it goes back to the starter screen

    THe mail app on my ipad 2 quits right after launching. This happened as I was forwarding an email with a long attachment. Now I get a blank screen with just the icons, no mail mailboxes etc. after a few seconds that blank screen disappears and we go back to the starter screen. I tried rebooting, relaunching but no luck so far. Can somebody help me? Thanks
    Hans V

    Have you tried removing the email account from the app through settings?  I would try removing it, rebooting, opening the email app to see if it still crashes,  & then adding it back your email account. 
    If you're leary about causing more issues while you're not home, you could always try using a third party mail app (there are many), accessing your email through it...not a fix for your problem but a way to deal with the situation until you can get it worked out.
    Resetting all settings on the iPad (not deleting content) is a good way to clear many errors as it can remove leftover cache files & files that have become corrupt.
    Sorry I couldn't be of more help.  Good luck & let us know if you get it working.

  • Can I view a QuickTime movie on my ipad2? When I click on link that should launch a QuickTime movie I get a blank screen.

    Can I view a QuickTime movie on my ipad2? When I click on link that should launch a QuickTime movie I get a blank screen. Is there something I should download to make this work?

    Install OPlayer HD and enable the QuickTime plugin to play your movies.

  • Transaction launcher parameter not handed over to ERP system

    Hi experts,
    We generated an R3 transaction launcher via the wizzard. We try to hand over the BP_NUMBER to the ERP system.
    This does not work. The entitiy collection in the gdc is not filled.
    Actually it gets the gdc form the view controller of the action box view (GV_VIEW_CONTROLLER->VIEW_ID  = UICMP_LTX/ABoxExecution). See also the coding below.
    method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW.
      data: __gdc    type ref to if_crm_ui_data_context,
            __source type        string,
            __line   type        string,
            __path   type        crmt_ic_ac_identify_path.
    __gdc ?=
    cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
    ********** Begin of parameter declaration ***********
    data ICWCPROCESSEDOBJECT
    type ty_ICWCPROCESSEDOBJECT .
    data BP
    type ty_BP .
    data ICWEBCLIENTBORKEYPARAMETER
    type ty_ICWEBCLIENTBORKEYPARAMETER .
    concatenate
    space
    'CURRENTCONTACT/BuilContactPersonStandardAddressRel/BP_NUMBER'
    into __source.
         if __gdc is bound.
           try.
               call method __gdc->GET_ENTITY_ATTRIBUTE_AS_VALUE
                 exporting
                   path = __source
                 importing
                   value = BP .
             catch cx_crm_bdc_no_data cx_crm_bdc_xpath_error cx_root.
               clear BP .
           endtry.
         endif.
    me->set_container_data(
       iv_name  = gc_BP
        iv_value = BP ).
    * Data flow is complete - set to false if data is missing
    gv_data_flow_complete = abap_true.
    endmethod.
    Please help if you have any ideas.
    Regards,
    Thea

    Hi Thea,
    a stupid question, did you confirm the customer previously?
    what happens, when you use the following coding to get current customer?
    *   get confirmed customer of GDC
        TRY.
            lo_customer = __gdc->get_entity( if_iccmp_global_data_cont_con=>gdc_currentcustomer ).
            BP = lo_customer->get_property_as_string( 'BP_NUMBER' ).
          CATCH cx_root.
        ENDTRY.
    maybe this will help...
    best wishes,
    Hakan

  • Transaction launcher sales org parameter to ERP

    Hi Experts,
    We want to pass parameters to the ERP transactions.
    We are fine with devision an chanel but we cannot access the right ERP SalesOrg format.
    So fare we access the information in the LTX with this structure : //datacontextCURRENTBT/BTOrderHeader/BTHeaderOrgmanSet
    But the Sales Org contained is just the CHAR8 Short Description we enter in the OrgManagement it is not the connected ERP sales org CHAR4.
    Do you have an idea or workarounds?
    Regards, Thea

    Hi Thea,
    You have to use this API method GET_VKORG_OF_SALES_ORG of CL_CRM_ORG_MANAGEMENT_API to get the ECC Sales Org.
    Then in the generated Tx Launcher Class method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW you may have to adjust parameter
    ICWEBCLIENTBORKEYPARAMETER.
    Anyhow you can debug this method to see what is happening.
    Take a look at this class CL_CRM_TL_ERP_VBRK_DISPLAY (this may help).
    ........Masood Imrani S.

  • Transaction Launcher  in system ERP 6.0 EIC

    Hello,
    Do you know where to find the properly configuration for the transaction launcher of EIC on ERP 6.0?
    Because actually doesn´t run well
    Thanks for your help!
    Actually we have active service  ccmp_rabox into "SICF" and in
    the "spro"
    IMG/Personal management/Employee Interaction Center( EIC)/ Interaction Center Web-Client/Basis Funtions/Transaction Launcher/ Define Logical Systems and ITS URLs.
    I put http://:/scripts/wgate/CCMP_RABOX/!, but i find this configuratio to CRM and not to EIC.
    Thanks

    Hello,
    CCMP_RABOX makes a lot of problems.
    Please use  ITS URLs as following:
                  http://<host>:<port> /scripts/wgate/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE, or
                  http://<host>:<port> /sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
    as in note 1176990 and 1021222 described.
    Please notice that there is currently another issue:
    SAP Note 1360904 - SAP GUI for HTML: Application services do not start
    Kind Regards
    Uwe

  • Open ERP transaction within CRM 2007 using wizard for transaction launcher

    Hello everybody,
    I am trying to launch a SAP ERP transaction within SAP CRM 2007 using the transaction launcher wizard.
    First I maintained all necessary setting for the RFC connections (in ERP and CRM) using for example transaction SM59 and BD87, e.g. the master data replication is working fine. Second I created a business object type based on the SAP Standard business object TSTC and set the u201CExecuteu201D method to u201CSynchronousu201D in SAP ERP.
    Afterwards I created the URL for our ITS server and started the transaction launcher in CRM. During the step u201CFurther technical detailsu201D I selected as transaction type u201CBOR transactionu201D and chose our logical system (ERP) and added our newly created BOR object type as well as the method u201CExecuteu201D. If I now press the u201CNextu201D button the error message u201CAn RFC destination could not be specified for the logical system XYu201D is shown.
    Any help is highly appreciated.
    Thanks lot and kind regards,
    Franziska

    Hi,
    The error you get is because the client you have mentioned for logical system mapping and the client in which you created the BOR object are not same.
    Remember, for sucessfull transaction Launcher Configurations,
    1) The client in which WEB UI Runs
    2) The Logical System mapping and client mentioned in ITS url
    3) The client is which you created the BOR object.
    4) The client on which you are configuring transaction launcher wizard
    ALL SHOULD BE THE SAME CLIENT, unless you are using the OWNLOGSYS concept for logical system mapping.
    For example,
    If my WEB UI is on client 200 of development system,
    then i must create TSTC based BOR in client 200 , Map logical system for client 200 and configure trnsaction launcher in client 200.
    In this approach, you cant transport the developments to other system and client ( like Quality and production system) , hence its advicible to create a logical system with name OWNLOGSYS. The name of logical system must be kept OWNLOGSYS in all the systems and clients so that then you can transport yout transaction launcher developments and the error you get now will not come. It its not possible to maintain the logical system with this name in all the system , then you will have to do as i mentioned in points 1 to 4.
    Hope this helps.
    Thanks & Regards,
    Suchita

  • HT204266 'To improve Apple ID Security' chose three security questions and answers... this leads to a blank screen on my iPad mini. How can I get past this?

    'To improve Apple ID Security' chose three security questions and answers... this leads to a blank screen on my iPad mini. How can I get past this?

    Exactly the same problem with my new iPad...i have also tapped and hold the question bar as someone told somewhere, but no difference...a blank screen...help pleaseeee

Maybe you are looking for

  • UpdatableVO: Iterator values not refreshing on change of event

    Hi All, I am using JDev 11.1.2.1.0 I am facing problem in accessing the table values in the baking bean. My problem goes this way: I have a table called rework. I created Entity object called ReworkEO based on table Rework and created updatable view

  • Java - Something's very wrong

    I use the gotomypc remote access service website which is entirely Java based. For more than a year I have happily toiled away with my various macs accessing my office pc using gotomypc. However in the last week or so it has stopped loading the java

  • How to achieve same start date for two ATO Items- req to built together

    We have two ATO Items and these to be built & shipped together which have different leadtimes, How we can have achieve same start date when we release from ASCP. E.g: ATO_Model1*24234 SO Line 1, the rolled up LT=10Days ATO_Model2*325325, the rolled u

  • Can not unzip the zip file of AIR 3.4 beta2 sdk for windows

    http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/air3-4/air3-4_p2_sdk_win_0807 12.zip the file can not be unzip.

  • Satellite A660-18N - Powers off after waking from sleep mode

    My Satellite A660-18N powers off 2-3 seconds after waking from sleep mode. I upgraded the memory from 4GB to 8GB, using Crucial's website, so I know it's compatible. BIOS is updated to 2.00. Not sure what to do, how can I fix this without turning off