ERPi and FDM for 11.1.2.2 - Source adapter?
Hi, all
Could you please help on the following questions about ERPi and FDM for 11.1.2.2
1. In general, what is a source adapter used for?
2. In the FDM installation package, there is an adapter (ERPI-FIN-E) for ERP integrator.
I would like clarify if my understanding below is correct or not.
My understanding is that this adapter allows automation on execution of ERPi data load rules in the FDM application, which means we can kick start the data load rule of ERPi by scheduled FDM jobs.
Thanks so much for your help.
Hi,
1. Classic FDM source adapters are used to import data from native supported source system (EBS, SAP, ERPI) instead of files or databases. Let´s say that in some how the extract process is already packaged so you can extract from source system what the adapter does
2. You are right, as ERPI is a transition product between Classic FDM and FDMEE (11.1.2.3), there were some FDM functionality missing in ERPI. Therefore you had to use a mix of ERPI and FDM in order to get the full functionality. You use ERPI to extract data and FDM to process it (scripting, intersection validation report, etc.)
In 11.1.2.3, this gap is even smaller as now we have scripting, intersection validation report, and other functionality within FDMEE 11.1.2.3 (re-branded ERPI). The source adapter for Classic FDM still exists.
In 11.1.2.4, as classic FDM will not be available anymore -> no more source adapter :-)
Hope that helps
akafdmee.blogspot.com
@akafdmee
Similar Messages
-
11.1.2.1 execute dataload error in erpi and FDM
Hi
I met a critical problem when execute dataload in erpi using classic method.
there are data in E business suite, but I don't know why I can't pull data from EBS.
also I execute dataload using FDM method, the import step in FDM yields an error: "error creating database link".
could you help me to find the problem?
regards,
Samantha
the error message please refering this:
java.lang.Exception: ERROR: Drill Region was not created/updated. No valid data rows exist in TDATASEG_T for Process ID: 14
ERPI Process Start, Process ID: 14
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\/aif_14.log
Jython Version: 2.1
Java Platform: java1.4.2_08
COMM Process Periods - Insert Periods - START
COMM Process Periods - Insert Periods - END
COMM Process Periods - Insert Process Details - START
COMM Process Periods - Insert Process Details - END
LKM EBS/FS Extract Type - Set Extract Type - START
LKM EBS/FS Extract Type - Set Extract Type - END
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - START
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - END
LKM EBS/FS Extract Delta Balances - Load Audit - START
LKM EBS/FS Extract Delta Balances - Load Audit - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
LKM EBS/FS Extract Type - Set Extract Type - START
LKM EBS/FS Extract Type - Set Extract Type - END
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - START
LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - END
LKM EBS/FS Extract Delta Balances - Load Audit - START
LKM EBS/FS Extract Delta Balances - Load Audit - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
EBS/FS Load Data - Load TDATASEG_T - START
Import Data from Source for Period '2011年八月'
Monetary Data Rows Imported from Source: 182
Total Data Rows Imported from Source: 182
EBS/FS Load Data - Load TDATASEG_T - END
COMM Update Data - Update TDATASEG_T/TDATASEGW - START
Warning: Data rows with zero balances exist
Zero Balance Data Rows Deleted: 8
Processing Mappings for Column 'ACCOUNT'
Data Rows Updated by 'DEFAULT' (LIKE): 174
Processing Mappings for Column 'ENTITY'
Data Rows Updated by 'DEFAULT' (LIKE): 174
Processing Mappings for Column 'ICP'
Data Rows Updated by 'DEFAULT' (LIKE): 174
Processing Mappings for Column 'UD1'
Data Rows Updated by 'Custom1' (LIKE): 174
Processing Mappings for Column 'UD2'
Data Rows Updated by 'Custom2' (LIKE): 174
Processing Mappings for Column 'UD3'
Data Rows Updated by 'Custom3' (LIKE): 174
Processing Mappings for Column 'UD4'
Data Rows Updated by 'Custom4' (LIKE): 174
Processing Mappings for Column 'UD5'
Data Rows Updated by 'Value' (LIKE): 174
Warning: Data rows with unmapped dimensions exist
Data Rows Marked as Invalid: 174
Warning: No data rows available for Export to Target
Total Data Rows available for Export to Target: 0
COMM Update Data - Update TDATASEG_T/TDATASEGW - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
EBS/FS Load Data - Load TDATASEG_T - START
Import Data from Source for Period '2011年九月'
Monetary Data Rows Imported from Source: 193
Total Data Rows Imported from Source: 193
EBS/FS Load Data - Load TDATASEG_T - END
COMM Update Data - Update TDATASEG_T/TDATASEGW - START
Warning: Data rows with zero balances exist
Zero Balance Data Rows Deleted: 69
Processing Mappings for Column 'ACCOUNT'
Data Rows Updated by 'DEFAULT' (LIKE): 124
Processing Mappings for Column 'ENTITY'
Data Rows Updated by 'DEFAULT' (LIKE): 124
Processing Mappings for Column 'ICP'
Data Rows Updated by 'DEFAULT' (LIKE): 124
Processing Mappings for Column 'UD1'
Data Rows Updated by 'Custom1' (LIKE): 124
Processing Mappings for Column 'UD2'
Data Rows Updated by 'Custom2' (LIKE): 124
Processing Mappings for Column 'UD3'
Data Rows Updated by 'Custom3' (LIKE): 124
Processing Mappings for Column 'UD4'
Data Rows Updated by 'Custom4' (LIKE): 124
Processing Mappings for Column 'UD5'
Data Rows Updated by 'Value' (LIKE): 124
Warning: Data rows with unmapped dimensions exist
Data Rows Marked as Invalid: 124
Warning: No data rows available for Export to Target
Total Data Rows available for Export to Target: 0
COMM Update Data - Update TDATASEG_T/TDATASEGW - END
COMM End Process Detail - Update Process Detail - START
COMM End Process Detail - Update Process Detail - END
COMM Update YTD Amounts - Update YTD Amounts - START
COMM Update YTD Amounts - Update YTD Amounts - END
ODI Hyperion Financial Management Adapter Version 9.3.1
Load task initialized.
LKM COMM Load Data into HFM - Load Data to HFM - START
Connecting to Financial Management application [EEHFM2] on [taly_cluster] using user-name [admin].
Connected to Financial Management application.
HFM Version: 11.1.2.1.0.
Options for the Financial Management load task are:
Load Options validated.
Source data retrieved.
Pre-load tasks completed.
HFM Log file path: "C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\aif_14HFM59238.log".
Load to Financial Management application completed.
Load task statistics - success-count:0, error-count:0
Cleanup completed.
Disconnected from Financial Management application.
LKM COMM Load Data into HFM - Load Data to HFM - END
ERPI Process End, Process ID: 14The data load method for your target application should be set to "FDM" if you are going to be using FDM for your Data Load Rule imports. The Error in creating the DB link is due to the FDM Schema not being granted the DBLINK role in Oracle. In the FDM DBA Guide it explains that the FDM Schema must be granted the create DBLINK role when using the ERPi adapter.
-
ERPi and FDM with concatenation
Hi folk. I'm using EBS/ERPI/FDM/Planning 11.1.1.3 and I've concatenated 2 GL segments in 1 dimension entity. In the metadata rule I used this option plus a prefix E, but in FDM, after import I've had E1111_222222, instead of E1111222222. How to disapear with the underscore characater in order to pass thru FDM Validation?
Thanks in advance
Luiz MenegocciAre both segments contained in the source file that is generated by ERPi? Rather than concatenating in ERPi, you many want to have the import define both fields in the source file as the entity dimension and in your import format use both fields for entity and the two fields will be concatenated, just like a standard source file file would be.
Just a thought.
Other than that, I could only see this being done with an import script assigned to the entity field. -
Java Message Mapping : Dynamic FileName and Directory for ASMA
How to Put Dynamic FileName and Directory for ASMA Properties of File Receiver adapter in Java Message Mapping ???
I know How to Do this in UDF , But In Java Type Message Mapping . How to do this ????
Regards
PS.Hi
chk this:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=95093307
Thanks
Amit -
Is this script still valid for setting up Drill through between HFM and FDM
Guys hoping some one can shed a light.
I am running hfm and fdm realese 11.1.1.3.000
I am having issues setting up the SSO authentication (all the other steps have been done, and HFM is aware that I have uploaded information that can drill back). I am using an SSO script that was part of an Oracle presentation, but don't know if that script is still relevant.
Here is a copy of the script (Visual Basic Script SSO Authentication) :
Function AuthenticateSSO(token, applicationName)
' Place your single sign-on authentication script here
' To signify an authentication failure, you should
' raise an error by calling the following method:
' Err.Raise [error number over 1000], [source], [description]
' Applicationname = FDMApplication in URL
Const strProcSig = "AuthenticateSSO"
Dim strUsername
Dim strDomain
Dim objHFMSSO
Dim strClusterName ' HFM cluster name
Dim strAppName ' HFM application name
Set objHFMSSO = CreateObject("upsIntBlockFM40C.clsHypeWindowFM")
If Not objHFMSSO Is Nothing Then
strClustername = "<xxxxxxxx>"
Select Case ApplicationName
Case "<xxxxxxxx>"
strAppName = "<xxxxxxxx>"
End Select
strUsername = objHFMSSO.Connection.GetUsernameFromToken(CStr(Token), strClustername, strAppName)
If Trim(strUsername & "") = "" Then
' Blank user name means the token is invalid.
Set objHFMSSO = Nothing
Err.Raise 2655, strProcSig, "The Single Sign-on token is invalid."
Else
' Return the user name from the authenticated token.
AuthenticateSSO = strUsername
End If
End If
Set objHFMSSO = Nothing
End Function
After I input all the information requested, I always get the error Server Error in '/' Application. The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
I did saw a note about this error that suggested that I needed to re-register and deploy again FDM. Did, but still have the same issue. So the only thing that I don't control is the script and that is why I am asking if this script is still active and usable?I have done all of that but I still get an error when trying to drill back. I am using the Admin ID which exist on both FDM and HFM but I am always getting the
Server Error in '/' Application.
The resource cannot be found.
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /HyperionFDM/AuthorizedPages/IntersectionSummaryByLocation.aspx
So the only thing that I hadn't tried at the time was the SSO script. Which was what I did. -
Hi,
Please tell me what is difference between FDM and FDM workbench.
Thanks in advance :)The FDM web is the main interface for FDm when the Import of source data is performed, Mapping is Created, Locations are Built, etc.
The Workbench is strictly a Windows CLient tool for FDM administrators where the Adapters are imported and maintained for the target and source (if using ERPi).
The workbench is also used to import the reports for FDM and you can maintain scripts within the workbench (you can also maintain scripts from the web as well). -
HFM and FDM on Windows server 2008 - 64 bit
Hi All,
We are installing HFM and FDM on Windows server 2008 - 64 bit.
For FDM we installed 32 bit oracle client and for HFM 64 bit client.
When trying to Configure HFM the database Configuration is failing.
Appreciate all your support.I was not able to get both HFM and FDM to work on the same node due to differences in the 32/64 bit Oracle Client requirements. I suggest moving FDM to another node where you can install the 32 bit client without effecting HFM.
Nick -
Hi All
We have new requirement our Source is PeopleSoft from that we want to load data to essbase and planning using ERP Integrator
Previously we use to get text files from Peoplesoft and we use to load it FDM to Planing & Essbase
What are prerequisites to connect to Peoplesoft -> ERP Integrator -> FDM
Do we require ODI to connect to Peoplesoft ?
Can anyone explain me the flow
Thanks,Hi Tom
We are using
1. Hyperion 11.1.2.2 Essbase ,Planning and FDM
2.ODI 11g
3.Now we want to Connect to Peoplesoft using ODI -> ERPi -> FDM ->Essbase and Planning
One is connecting ERPi & FDM through the use of the appropriate adapter, and additional metadata information.
If possible can u explain the above clearly
Thanks -
Help understanding ERPi and planning
Hi All,
Planning/Essbase. Version is 11.1.2.
Can you please help me understand the role of the ERPi adapter. I have hyperion planning that sits on an essbase cube. We load data and metadata from E-Business Suite 11. From forms and reports I want to drill back to the data in EBS. I have installed and configured the ERPi adaptor and the scenarios in ODI
Question 1)
Do I need to load data and metadata to be able to drill-through.
Question 2)
I have set my target and source systems - where do I configure the "Drill Through"
thanks in advance for any help offered.Hi There,
To answer your questions...
1. This part of the process from what I've seen is integral to the product working - so the answer is yes
2. Drill through is defined in a number of places one of those is in the "Target Application Registration" within ERPi and there is also a flag within the the adapter.
Oracle have produced some good step by step documentation on this, please check metalink for note ID 951369.1 and this will take you through the process.
HTH
Mark -
Automatic TO creation and confirmation for a Material document
Hi Dear All,
i am new to MM andWM.
I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
Double click on control data tab
Hear for my warehouse I given input like Auto TO = 1,
AddId = select check box.
And in Assign control tab for 101 movement type I have given input like below.
Automatic TO = 1.
TO item can be confirmed immed. = tick checkbox
Propose Confirmation = tick checkbox.
Foreground/Backgrnd = D.
After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like TO processing finished: TR total: 17, TO created: 0, Errors: 17.
If I check header details of transfer requirements in LB03, i am not seeing Tick Mark in Auto TO Creation field.
Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
Thanks in Advance..Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2 -
Need help to open and look for file by name
Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^ -
Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.
Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers. -
"securely" use one ethernet interface for WAN and other for the LAN
I am reconfiguring our dual 2.7 Intel Xserve running MacOSXServer 10.5.4, and had a question.
Is it possible (or advisable) to use en0 to perform LAN services, and then configure en1 to only allow access to very limited service. VPN, FTP, CALDAV and later Mail.
I imagine that this is possible via a firewall configuration, but first I do not know how to specify interface in addition to ports, and second I don't know how advisable this would be.
Currently I have a DSL package from ATT with 5 static IP addresses. I have an Airport Extreme set up as one of those addresses providing DHCP and NAT to the LAN. I am using the LAN ports on the back of that to bridge my three switches (2 managed [clients and oce print server 100 base-T] and 1 unmanaged [ laser printers and copier 10 base-T]).
I have the LAN based on 192.168.0.x, with the Xserve at 192.168.0.5. I have DNS configured and working (Thank you Antonio Rocco)
I have 20 LAN clients, 18 mac 1 PC and one PC via Parallels. I will have no more than 1 or 2 WAN clients at any one time
I provide AFP, SMB, Directory Services currently. As part of the reconfigure, I desire to take better advantage of the collaboration tools to provide wikis and CALDAV services. I also want to allow our employees to publish their individual calendars, so that they can subscribe to them at home, or vice versa.
I would like to configure VPN, one for me to access configurations when I am away using Remote Desktop (I have used command line to some extent, but still feel more comfortable with the GUI tools) and second for limited access to content for certain users.
It would also be very helpful for us to have a FTP site. It is unnecessary for this the be a FQDN service, sending the IP address is perfectly acceptable as we only use a service like this 10-15 times a year.
(Related but unimportant in the grand scheme, is there a way to generate a link to the FTP server that you could email that not only is a link, but also a temporary username and password?)
Thank you in advance,
Ion WebsterFirst, I missed a zero in the network speeds, I have two managed GbE switches that have all of the GbE capable machines connected to them, and an unmanaged GbE switch that has all the 10 or 100Base-T connections. My apologies for the mistake. That was one of the reasons I went with the GbE capable Airport to bridge the switches.
Ok, I had been leaning towards a separate hardware firewall, but here is also where there is a hole in my knowledge. Do I need to look at something like the Linksys RVS4000 which bills itself as a +"4-Port Gigabit Security Router with VPN. Secure, smart Gigabit networking for growing business"+ I would like easy configuration, as I take care of these systems in addition to my job, rather than full time. This will be the first time I have set up a VPN connection, so even though I have spent a lot of time researching the manuals, and reading Schoun Regan (Apple Training Series) I don't have real world experience here. So if I buy more hardware, I want it to be the product that will provide the protection, and also allow me to configure it so that I can get these services running. All my VPN clients are running Macs, most on an AIrport connection and have their IP ranges in the 10.0.1.x range. all but one is on OS 10.5.x so I have a fairly homogeneous set of machines to make work together.
I will review the links you provided regarding static routing, but I do believe the hardware solution is a better one, and wish to pursue it, for all the reasons you give, and that in the brief perusal of the links, it is more than I want to tackle.
As far as FTP vs sFTP, I have no preference. I simply want a way to have online storage for transfer of large files on occasion. Ideally I want a folder, or a series of folders that are accessible for my LAN users to put items in and take them out, and for my (s)FTP users to do the same
So long story short, the hardware solution I would like to purchase, I need to be able to do the following:
VPN connections for content access and ARD access ( knew about and will ensure differing IP ranges)
(s)FTP
Calendar publishing
mail(at a later time)
Thank you for your help thus far.
Ion Webster -
i accidently set up one account for icloud and one for itunes; suggestions on how to correct this and use just one account for both.... thanks
If you want to change your iCloud ID to another existing ID you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account. To do this, first go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
This will not move your photo stream, however. If you have photos in photo stream that aren't in your camera roll and that you haven't backed up anywhere else you will need to save these before deleting the account. To do this, open your photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos to select them, tap Share, then tap Save to Camera Roll. You can then delete the iCloud account and your photos will stay in your camera roll. -
I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?
Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.
Maybe you are looking for
-
Connecting Apple TV to an Acer H5380BD DLP Projector?
Having trouble connect Apple TV to an Acer H5380BD DLP Projector. It is currently connected with an HDMI cable to projector. I played a purchased movie once with the same HDMI cable/connection and it worked fine. The next day I tried to watch the sam
-
Windows 7 Pro (64-bit), iTunes 10 and AppleTV (160Gb)
I'm trying to move my iTunes collection to a PC running windows 7 pro (64bit) - a machine I'm happier to leave on 24/7 than my iMac. I've a fresh install of windows and installed the latest 64-bit iTunes. However, the PC doesn't display the AppleTV u
-
Call thirty party java web service but always return null
hi I call a java web service in my application visual studio 2008 c#, but always return NULL. I used Tool Fiddler to monitor the traffic between my client and the web service server, it showed the return is not Null. Here is my code, please see if an
-
MPLS - How are external/internal routes distinguished?
Hi all I was setting up an MPLS environment and wanted to get some more information about how MPLS VPN's work. Basically I have three sites connected to the MPLS cloud. Site A runs EIGRP on the customer side and Site B runs OSPF on the customer side.
-
Hi, Iam restoring LC backup from Production to QA system from dbmgui. during backup restore initial phase 0KB of 0 pages transferred iam getting error "-24988 SQL error[db_activate....]; -902,I/O error". Restore did not satrted. When i went to /sapdb