ERPi and FDM with concatenation

Hi folk. I'm using EBS/ERPI/FDM/Planning 11.1.1.3 and I've concatenated 2 GL segments in 1 dimension entity. In the metadata rule I used this option plus a prefix E, but in FDM, after import I've had E1111_222222, instead of E1111222222. How to disapear with the underscore characater in order to pass thru FDM Validation?
Thanks in advance
Luiz Menegocci

Are both segments contained in the source file that is generated by ERPi? Rather than concatenating in ERPi, you many want to have the import define both fields in the source file as the entity dimension and in your import format use both fields for entity and the two fields will be concatenated, just like a standard source file file would be.
Just a thought.
Other than that, I could only see this being done with an import script assigned to the entity field.

Similar Messages

  • ERPi and FDM for 11.1.2.2 - Source adapter?

    Hi, all
    Could you please help on the following questions about ERPi and FDM for 11.1.2.2
    1. In general, what is a source adapter used for?
    2. In the FDM installation package, there is an adapter (ERPI-FIN-E) for ERP integrator.
    I would like clarify if my understanding below is correct or not.
    My understanding is that this adapter allows automation on execution of ERPi data load rules in the FDM application, which means we can kick start the data load rule of ERPi by scheduled FDM jobs.
    Thanks so much for your help.

    Hi,
    1. Classic FDM source adapters are used to import data from native supported source system (EBS, SAP, ERPI) instead of files or databases. Let´s say that in some how the extract process is already packaged so you can extract from source system what the adapter does
    2. You are right, as ERPI is a transition product between Classic FDM and FDMEE (11.1.2.3), there were some FDM functionality missing in ERPI. Therefore you had to use a mix of ERPI and FDM in order to get the full functionality. You use ERPI to extract data and FDM to process it (scripting, intersection validation report, etc.)
    In 11.1.2.3, this gap is even smaller as now we have scripting, intersection validation report, and other functionality within FDMEE 11.1.2.3 (re-branded ERPI). The source adapter for Classic FDM still exists.
    In 11.1.2.4, as classic FDM will not be available anymore -> no more source adapter :-)
    Hope that helps
    akafdmee.blogspot.com
    @akafdmee

  • 11.1.2.1 execute dataload error in erpi and FDM

    Hi
    I met a critical problem when execute dataload in erpi using classic method.
    there are data in E business suite, but I don't know why I can't pull data from EBS.
    also I execute dataload using FDM method, the import step in FDM yields an error: "error creating database link".
    could you help me to find the problem?
    regards,
    Samantha
    the error message please refering this:
    java.lang.Exception: ERROR: Drill Region was not created/updated. No valid data rows exist in TDATASEG_T for Process ID: 14
    ERPI Process Start, Process ID: 14
    ERPI Logging Level: DEBUG (5)
    ERPI Log File: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\/aif_14.log
    Jython Version: 2.1
    Java Platform: java1.4.2_08
    COMM Process Periods - Insert Periods - START
    COMM Process Periods - Insert Periods - END
    COMM Process Periods - Insert Process Details - START
    COMM Process Periods - Insert Process Details - END
    LKM EBS/FS Extract Type - Set Extract Type - START
    LKM EBS/FS Extract Type - Set Extract Type - END
    LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - START
    LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - END
    LKM EBS/FS Extract Delta Balances - Load Audit - START
    LKM EBS/FS Extract Delta Balances - Load Audit - END
    COMM End Process Detail - Update Process Detail - START
    COMM End Process Detail - Update Process Detail - END
    LKM EBS/FS Extract Type - Set Extract Type - START
    LKM EBS/FS Extract Type - Set Extract Type - END
    LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - START
    LKM EBS/FS Extract Delta Balances - Delete Obsolete Rows - END
    LKM EBS/FS Extract Delta Balances - Load Audit - START
    LKM EBS/FS Extract Delta Balances - Load Audit - END
    COMM End Process Detail - Update Process Detail - START
    COMM End Process Detail - Update Process Detail - END
    EBS/FS Load Data - Load TDATASEG_T - START
    Import Data from Source for Period '2011年八月'
    Monetary Data Rows Imported from Source: 182
    Total Data Rows Imported from Source: 182
    EBS/FS Load Data - Load TDATASEG_T - END
    COMM Update Data - Update TDATASEG_T/TDATASEGW - START
    Warning: Data rows with zero balances exist
    Zero Balance Data Rows Deleted: 8
    Processing Mappings for Column 'ACCOUNT'
    Data Rows Updated by 'DEFAULT' (LIKE): 174
    Processing Mappings for Column 'ENTITY'
    Data Rows Updated by 'DEFAULT' (LIKE): 174
    Processing Mappings for Column 'ICP'
    Data Rows Updated by 'DEFAULT' (LIKE): 174
    Processing Mappings for Column 'UD1'
    Data Rows Updated by 'Custom1' (LIKE): 174
    Processing Mappings for Column 'UD2'
    Data Rows Updated by 'Custom2' (LIKE): 174
    Processing Mappings for Column 'UD3'
    Data Rows Updated by 'Custom3' (LIKE): 174
    Processing Mappings for Column 'UD4'
    Data Rows Updated by 'Custom4' (LIKE): 174
    Processing Mappings for Column 'UD5'
    Data Rows Updated by 'Value' (LIKE): 174
    Warning: Data rows with unmapped dimensions exist
    Data Rows Marked as Invalid: 174
    Warning: No data rows available for Export to Target
    Total Data Rows available for Export to Target: 0
    COMM Update Data - Update TDATASEG_T/TDATASEGW - END
    COMM End Process Detail - Update Process Detail - START
    COMM End Process Detail - Update Process Detail - END
    EBS/FS Load Data - Load TDATASEG_T - START
    Import Data from Source for Period '2011年九月'
    Monetary Data Rows Imported from Source: 193
    Total Data Rows Imported from Source: 193
    EBS/FS Load Data - Load TDATASEG_T - END
    COMM Update Data - Update TDATASEG_T/TDATASEGW - START
    Warning: Data rows with zero balances exist
    Zero Balance Data Rows Deleted: 69
    Processing Mappings for Column 'ACCOUNT'
    Data Rows Updated by 'DEFAULT' (LIKE): 124
    Processing Mappings for Column 'ENTITY'
    Data Rows Updated by 'DEFAULT' (LIKE): 124
    Processing Mappings for Column 'ICP'
    Data Rows Updated by 'DEFAULT' (LIKE): 124
    Processing Mappings for Column 'UD1'
    Data Rows Updated by 'Custom1' (LIKE): 124
    Processing Mappings for Column 'UD2'
    Data Rows Updated by 'Custom2' (LIKE): 124
    Processing Mappings for Column 'UD3'
    Data Rows Updated by 'Custom3' (LIKE): 124
    Processing Mappings for Column 'UD4'
    Data Rows Updated by 'Custom4' (LIKE): 124
    Processing Mappings for Column 'UD5'
    Data Rows Updated by 'Value' (LIKE): 124
    Warning: Data rows with unmapped dimensions exist
    Data Rows Marked as Invalid: 124
    Warning: No data rows available for Export to Target
    Total Data Rows available for Export to Target: 0
    COMM Update Data - Update TDATASEG_T/TDATASEGW - END
    COMM End Process Detail - Update Process Detail - START
    COMM End Process Detail - Update Process Detail - END
    COMM Update YTD Amounts - Update YTD Amounts - START
    COMM Update YTD Amounts - Update YTD Amounts - END
    ODI Hyperion Financial Management Adapter Version 9.3.1
    Load task initialized.
    LKM COMM Load Data into HFM - Load Data to HFM - START
    Connecting to Financial Management application [EEHFM2] on [taly_cluster] using user-name [admin].
    Connected to Financial Management application.
    HFM Version: 11.1.2.1.0.
    Options for the Financial Management load task are:
    Load Options validated.
    Source data retrieved.
    Pre-load tasks completed.
    HFM Log file path: "C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\aif_14HFM59238.log".
    Load to Financial Management application completed.
    Load task statistics - success-count:0, error-count:0
    Cleanup completed.
    Disconnected from Financial Management application.
    LKM COMM Load Data into HFM - Load Data to HFM - END
    ERPI Process End, Process ID: 14

    The data load method for your target application should be set to "FDM" if you are going to be using FDM for your Data Load Rule imports. The Error in creating the DB link is due to the FDM Schema not being granted the DBLINK role in Oracle. In the FDM DBA Guide it explains that the FDM Schema must be granted the create DBLINK role when using the ERPi adapter.

  • Problem with concatenating space character. Please help!

    Hi experts,
      I have requirement for creating fixed length data like this:
      Source Material.
      I am getting source value dynamically. Max size of source in 10.
    But sometime it may come as 'EMS01' and sometimes 'PLTN'. That its value can be of varied length.
    I need to concat Source and Material with space in between. The number of spaces in between is equal to 10 - current size.
    For example: If Source = 'EMS01'
       then there should be 5 spaces between source and material.
    If  source = 'PLTN'
    then there should be 6 spaces between source and material after concatenation.
    I tried like this:
    data: v_source(10),
            v_material(8),
            v_space(9),
            v_spclen type i.
    v_spclen = 10 - STRLEN( v_source ).
    DO v_spclen TIMES.
       v_space = v_space + ' '.
    ENDDO.
    CONCATENATE v_source v_space v_material INTO v_string.
    This does not work because it is putting number 0 in v_space value.
    How to resolve this? Please help!
    Thanks
    Gopal

    Hi,
    Try This.
    data: v_source(10),
           v_material(8),
           v_space(9),
           v_string(255) type c,
           v_spclen type i,
            v_spclen1 type i.            * Delcare  one more variable. This will contain Length of field  v_string after assign V_source to it.
      v_spclen = 10 - STRLEN( v_source ).
    v_string = V_source.
    CONDENSE v_string.
    v_spclen1 =  STRLEN( v_string ).
    v_spclen1 = v_spclen1 + v_spclen.   *   I have Added v_spclen1 and v_spclen to get exact position from where i will add v_material
    v_string+v_spclen1 = v_material.
        write v_string.
    Edited by: ShreeMohan Pugalia on Jul 24, 2009 3:13 PM

  • Problem with concatenation, need output in a desired format

    Hi all,
    I have a weird problem with concatenation.
    I should get an output in such a way that the result would be
    Put C:\TEMP\test20090210.xml /FOLDER1/test20090210.xml
    For this first to get C:\TEMP\test20090210.xml format I said
    CONCATENATE  'C:\TEMP\test' sy-datum '.XML' INTO filepath.
    For this secondly to get /FOLDER1/test20090210.xml format I said
    CONCATENATE  '/FOLDER1/test' sy-datum '.XML' INTO filepath1.
    Now I need to get the format
    Put C:\TEMP\test20090210.xml  /FOLDER1/test20090210.xml
    And to get this I said
    CONCATENATE  'put' filepath INTO  filepath SEPARATED BY space.
    And the output for filepath was Put C:\TEMP\test20090210.xml.
    But I want u2026u2026u2026.Put C:\TEMP\test20090210.xml /FOLDER1/test20090210.xml.
    How can I achieve this?
    If I say
    CONCATENATE  filepath INTO  filepath1 SEPARATED BY space. It throws a syntax error saying
    u201CUnable to interpret filepathu201D
    Please help me..i am dying to figure out how to concatenate and get the required output.
    My filepath contains u2026 Put C:\TEMP\test20090210.xml
    My filepath1 contains u2026/FOLDER1/test20090210.xml
    I need final output asu2026u2026u2026u2026.
    Put C:\TEMP\test20090210.xml /FOLDER1/test20090210.xml
    How to attain this..please helpu2026where I am going wrong..i declared filepath and filepath1 as STRING

    Hi all,
    Thanks for immediate reply...now it works..
    but i also need to put a counter like thing to distinguish my files.
    for my filepath....
    i want it as C:\TEMP\test20090210110146 so i said....
    CONCATENATE '    C:\TEMP\test'    sy-datum s   y-uzeit  '.XML'.
    Actually i am generating XML files and naming them as testsystemdatesystemtime.
    But i am concerend that my filed might be overwrriten if a file gets generated in a fraction of a millisecond..so to avoid that now i want to put a counter.
    i.e my filepath should now be as follows each time loop executes...
    C:\TEMP\test20090210110146_1
    C:\TEMP\test20090210110147 _2
    C:\TEMP\test20090210110148 _3.........and son on how can i do it
    i.e testsystemdatesystemtime+ a counter(which tells how many times loop executed)
    Once again thanks to all for immediate help...

  • ERP INTEGRATOR and FDM

    Hi All
    We have new  requirement our Source is PeopleSoft from that we want to load data to essbase and planning  using ERP Integrator
    Previously we use to get text files from Peoplesoft and we use to load it FDM  to Planing & Essbase
    What are prerequisites  to connect to Peoplesoft -> ERP Integrator -> FDM 
    Do we require ODI to connect to Peoplesoft ?
    Can anyone explain  me the flow
    Thanks,

    Hi Tom
    We are using
    1. Hyperion 11.1.2.2  Essbase ,Planning and FDM
    2.ODI 11g
    3.Now we want to Connect to Peoplesoft using ODI -> ERPi -> FDM ->Essbase and Planning
    One is connecting ERPi & FDM through the use of the appropriate adapter, and additional metadata information.
    If possible can u explain the above clearly
    Thanks

  • Connection MESG and INOB with additional field

    Hi friends,
    i'm beginner in ABAP and for this reason i create reports in ABAP query.
    So i create query between tables MSEG and INOB (then INOB with AUSP).
    In INOB-OBJEK - value is matnr and charg,
    but value in this field is: for example 
    matnr                    charg
    EK759064BK (8 free spaces) 0000000066
    EK759064BK (8 free spaces) 0000000067
    EK759064BK (8 free spaces)  0000000068
    EK759064BK (8 free spaces)  0000000069
    EK759064BK (8 free spaces) 0000000070
    My idea is to create additional field with MSEG-MATNR and MSEG-CHARG and relate with INOB-OBJEK
    (concatenate mseg-matnr mseg-charg into refkey.) 
    result is:
    EK759064BK0000000066
    EK759064BK0000000067
    EK759064BK0000000068
    EK759064BK0000000069
    EK759064BK0000000070
    Now my question is how to change code and create additional field like INOB-OBJEK, how to change my code so i have 8 free spaces between MATNR and CHARG?
    Edited by: Marin Lyubomirov on Dec 13, 2009 9:39 AM

    the ABAP keyword CONCATENATE has a parameter RESPECTING BLANKS
    So if you use this this parameter, then you would get the missing 8 spaces, because the material number field is 18 long and your material only 10 long.
    Alternative, just use an own field that is 8 long and do the concatenation like this :
    concatenate mseg-matnr myfield mseg-charg into refkey

  • FDM and FDM workbench

    Hi,
    Please tell me what is difference between FDM and FDM workbench.
    Thanks in advance :)

    The FDM web is the main interface for FDm when the Import of source data is performed, Mapping is Created, Locations are Built, etc.
    The Workbench is strictly a Windows CLient tool for FDM administrators where the Adapters are imported and maintained for the target and source (if using ERPi).
    The workbench is also used to import the reports for FDM and you can maintain scripts within the workbench (you can also maintain scripts from the web as well).

  • FDM with Hyperion Planning

    Hi,
    We are new to FDM. Apologies in advance if the questions below are not appropriate for this forum.
    Environment: Oracle eBS, Hyperion Planning. Currently have a bespoke system for world wide finance consolidation - data from Oracle eBS (both Actuals / Budgets) are pumped into Finance consolidation system through CSV files generated in Oracle eBS. Not using HFM.
    Questions:
    1) Can Hyperion Planning data be pumped into FDM? How?
    2) Can FDM be used for performing validation on Planning data? (e.g. some dimension combination not valid etc)?
    3) How common is FDM in Planning environment? Are there many customers using FDM with Hyperion Planning?
    4) Is there any customer live with FDM Adapter for Oracle eBS?
    Thanks.

    Nick,
    Sorry if I am causing confusion here but allow me to clarify:
    1) HFM is not in use. Global consolidation engine is outside regional system - data needs to be sent to Global consolidation engine which is a non-HFM target.
    2) Before sending the data, validation needs to be performed on both Actual as well as Budget if data combination is valid.
    3) Oracle eBS does the validation for Acutals - so we are fine there.
    4) How do we ensure that Budget data (captured in Planning) is also valid before uploading to global consolidation engine?
    If Planning can not be a source to FDM, I can not perform validation on Budget data using FDM, right?
    So - what alternative do we have to perform validation on Budget data before it gets transmitted to global consolidation engine (non-HFM and outside our control)?
    Goal is - prior to transmitting data (both budget and actual), validation should be performed locally and only clean data should be transmitted for global consolidation engine.
    Hope this explains the situation.
    Once again many thanks for your response.

  • How do I use Qt and OpenGL with Visual Studio

    Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
    I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
    Embedded firmware design(C and Assembly).
    The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
    Thanks
    Alexandros

    Hi ClassicalGuitar,
    The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • Open report with "Save as" and "Open with" dialogue

    Hi,
    I'm using jasper reports within my application. I manage to open them in a new window but in that case the url containing JasperServer username and password is shown. I would like to open the report without showing the url.
    I tryed using a database procedure (http://sqlcur.blogspot.com/2009/02/jasperreports-in-apex.html) but all I get is a alert window saying "file does not begin with ' pdf-'". Couldn't see what is the problem (I used the same procedure as Ino has in his example) so I thought of another way. Is it possible, when someone clicks a button to open a report, to open that report with a "Save as" and "Open with" pop up window?
    The javascript function that I use:
    <script language="JavaScript" type="text/javascript">
    function openLAPopUpJasper(url){
    w = open(url,"winLov","toolbar=false,menubar=false,location=false,resizable=yes, //scrollbars=yes,status=yes,fullscreen=true");
    if (w.opener == null)
    w.opener = self;
    w.focus();
    </script>
    Thanks in advance!
    Edited by: Josip on Oct 29, 2009 2:55 AM

    Anyone?

  • Troubleshoting help needed:  My iMac keeps crashing and restarting with a report detail: "spinlock application timed out"  What can I do to fix this?timed out"

    Troubleshooting help needed:  My iMac keeps crashing and restarting with a notice: "Spinlock application timed out"  What can I do?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • Is there a way to create a PDF form that ANYONE can fill out and SAVE with their content?

    Is there a way to create a PDF form that ANYONE can fill out and SAVE with their content? By anyone, I mean someone who can download and use the free Adobe Reader, on either a Mac or PC. I have Acrobat Pro, and would like to be able to create forms that can not only be filled out and printed, but saved and emailed, which is not an option with the forms I have created to date. They can be filled out, but not saved, with Adobe Reader.
    TIA,
    Nancy

    To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
    Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
    Acrobat 9: Advanced > Extend Features in Adobe Reader
    Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
    Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
    I wonder what it will be next time?

  • My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can i fix this without turning off iCloud?

    My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can I fix this without turning off iCloud?
    I am at a new office that uses Outlook (not Outlook Exchange) which does not sync with my mobile... I just got iCloud set up on my PC to sync my contacts, calendar, reminders, etc... The sync worked (not without flaws, but the other issues seem solvable... I think), so that i can now see all my appointments on both my phone and on my PC. The problem I am having is that iCloud moved all of my calendar items from Outlook into iCloud calendar and now when I send out meeting/calendar invites the recipients may accept them, but the meeting does not get added to their calendar. This is a huge problem and may mean that i need to turn off iCloud.
    Does anyone know how to fix this?
    Thanks!

    I am replying to my own post here as I seem to have fixed the problem.
    I do have some calendars that are shared. Some of those are shared with users who have time zone support turned on. So i activated time zone support on my iphone, then deleted my icloud subscription. I then signed in to icloud again and voila... problem solved.
    It is a weird one as the other calendar views were always fine and when you opened an event that appeared in the wrong day (on list view), the correct date of the event was shown in the information...
    one more bug in a complicated system I guess

  • My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    Hello, Pete. 
    Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

Maybe you are looking for