ERPI Concatenate Segment in the metadata rule Mapping Type

Hi Gurus,
I'm having an issue with ERPI Concatenate Segment. When i use mapping type as Concatenate Segment to concatenate Accounts and SubAccounts in the Metadata Rule receving Execution error in the ODI, but able to use FDM type without any errors and able to extract data from EBS 11.
My Target application is HFM (Classic) application.
I did update the new HFMDriver.dll, changed in the snpsconf file and updated the odi driver path in the environment variables.
While checking the aif.log from temp folder found error as below
ERROR [DwgCmdExecutionThread]: Error occurred during load process Error occurred in driver while connecting to Financial Management application [APPCONSOL] on [10.10.17.46] using user-name [admin]..
While check in the process details found error as below
Error occurred during load process. Error occured in driver while connecting to Financial Management application
Error in LKM COMM Load Members into HFM - Load Metadata to HFM
I checked all the settings in the Topology Manager and all the connections are successful.
Appreciate your help.
Regards,
K

Hi,
From complex transfer/update rule to transformation in routines, please check below note
Note 1052648 - Migrating transfer rules and update rules for BW7.x
Thanks

Similar Messages

Relationship between ERPi metadata rules and Data load rules

I am using version 11.1.1.3 to load EBS data to ERPi and then to FDM. I have created a Metadata rule where I have assigned a ledger from the Source Accounting Entities. I have also created a Data Load rule that references the same ledger as the metadata rule. I have about 50 ledgers that I have to integrate so I have added the source adapters that reference the Data Load rule.
My question is... What is the relation between the Meatdata rule and the Data load rule with the ledger? If you can specify only one Ledger per metadata rule, then how does FDM know to use another metadata rule with another ledger attached to it? Thanks!!!

Aksik
1 How freequently this activation problem occurs. If it is one time replicate the datasource and activate thetransfer structure( But in general as you know activation of transfer structure should be done automatically after transport of the object)
2 One thing for difference of time is environmental as you know in production system so many jobs will run at the same time so obiously system performance will be slow compare to Dev System. In your case both the systems are performing equally. You said in dev system for 50000 records half an hour and in production 200000 records 2hrs so records are more in Production system and it took longer time. If it is really causing problem then you have to do some performance activities.
Hope this helps
Thnaks
Sat

Related Content Field Mapping using "Page Field" mapping type

In PeopleBooks it refers to a Page Field mapping type whene mapping fields from the component to it's related content.
Is this a misprint in PeopleBooks, did this feature not make it into 8.50.09 or is this option only available under certain circumstances.
I'm trying to pass a non key field from level 0 to the rel content url.
Thanks to anyone who can shed some light on this.
Graham

Hi Jim
Thanks for the reply.
It appears that you can't select the "Page Field" mapping type unless you have the related content specified by PAGE ratehr than component.
PBOOKS states Page Field: use when you want to map the service parameter to any level 0 page field.
In the component buffer fields in level 0 could be any page. I was hoping to pass ANY level 0 field through to the Rel Content URL for any page in this component.
Kind regards
Graham

User mapping types

Hello,
any body tell me What are the available user mapping types ?
Thanks,
Kiran

There are no types in user mapping.
User mapping is used when there are different user id's across system landscape and they cannot be managed centrally.
Using user mapping we can map portal user id's with other systems like R3, non sap systems etc..
so that user no need to aiuthenticate again. It is one method of achieving SSO in portal.
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/3b514ca29011d5bdeb006094191908/frameset.htm
Also check the blogs for more information:
How to setup R/3 Reference system for User Mapping
Creating R/3 System and user mapping problem
User Mapping-based Single Sign On
Raghu

ERPI - cannot run extract for HFM metadata rule

Hi,
I'm in the process of configuring ERPI for FDM/HFM, no EPMA, version 11.1.1.3. Things are working fine until I created an HFM metadata rule and wanted to run the extract.
I see the extract ID and I can look at the process details and see it in there, but nothing is happening: no processes in ODI Operator, no log entries for the process ID in ERPI.
Can somebody tell me what I'm missing? Also, is there a log file with information on what's going on behind the scenes, in case the process doesn't even get to ODI?
Thanks,
Matt

Simple explanation: the agent wasn't running.
I haven't found out if there is a log file with general information, though. Does anyone know?
Thanks,
Matt

BW3.5: Error message when trying to activate the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Roberto,
Thanks for yoyur prompt reply, I would try to follow the instruction, but at the same time please note that previously we had no issue in activating the transfer structure. I would like to see the log in the source system, but don't know how to and which transaction to use etc. any help would be appreciated.
Thanks
ARUN

How to get an account with an IsICP -"R" attribute calculated in the HFM Rule file

Till recently everything was going fine with the calculations in our HFM setup ( Version 4.1)
We have say around 8 Expense accounts which roll up into a Parent account say ALL446 which finally rolls up into Operating Expenses.
Operating Expenses
|__ parent account
 |_INVALO
 |_ALL446
 |__222446
 |__242446
And we have a calculation in the rule file as below
HS.EXP "A#BE FIXED COST = A#Operating Expenses +A#SGA - A#BE VC OP F10"
This was calculating correctly till we did the below change
Added IsICP attribute to couple of accounts say 222446 and 242446 ( in the above example) in the metadata which finally rolls up into Operating Expense.
Note: we did not add any Plug account attribute to the accounts
Now the problem what we have in hand is -> Fixed Cost is not calculating correctly.- It happens that the two accounts for which we added the IsICP are not showing up in the calculation and the data in those two accounts are not adding up in Fixed Cost.
POV in GRID/Excel -> actual,2013,periodic,<Entity Currency>, ICP Top, AllCustom1, AllCustom2, AllCustom3, None( for custom4)
But when we retrieve Operating Expenses in Excel - it is showing the correct amount, even in the grid - but looks like when the rule tries to calculate Fixed Expenses using the above rule - these accounts are not adding up in the Operating expenses.
I tried the formula ( to check what number is coming into Fixed cost ) - the result is zero - But in the grid/excel I see amount for acct2. Same POV as above
HS.EXP "A#BE FIXED COST = A#222446"
and if I add & Tops to the account like below ( getting some weird number instead of what is there in acct2)
HS.EXP "A#BE FIXED COST = A#222446" & Tops
Questions:
1) Where exactly I am going wrong ?
2) Is it MANDATORY to have a Plugaccount attribute when we have IsICP turned to "R" ?
3) What will happen if we do not have a Plugaccount for the IsICP account ?
4) How to correct the formula to make sure I get the number in the acct2 into Fixed Cost??
5) Do we need to have the IsICP turned on to the immediate parent of the account having IsICP and the Top parents of the account too??
6) Is it possible to get the exact number what we have in 222446 into BE Fixed Cost account via Rule?- why I am not getting it
Notes:
BE Fixed Cost-> account type -"Expense", IsCalculated - yes, IsConsolidated - yes, IsICP- N, Custom1TopMember - AllFunctions, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
Operating Expenses->"Expense", IsCalculated - No, IsConsolidated - yes, IsICP- N, Custom1TopMember - AllFunctions, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
INVALO ->"Expense", IsCalculated - No, IsConsolidated - yes, IsICP- N, Custom1TopMember -none, Custom3TopMember- none,
enabled allcustom1,2,3,4aggregations
Problematic account 222446 -> "Expense", IsCalculated - No, IsConsolidated - yes, IsICP- R, Custom1TopMember - Operations, Custom3TopMember- AllCustom3, enabled allcustom1,2,3,4aggregations
The Entity on which I am trying to get the data( mentioning wherever I have attributes for this entity)
DefCurrency - DEM, Allowadjs- enabled, IsICP - enabled, Userdefined 2 - financial, - SecurityasPartner attribute - is not selected through out the applicaiton.
Variable
Tops = ".I#[ICP Top].C1#AllCustom1.C2#AllCustom2.C3#AllCustom3.C4#[None]"
tried attaching the attachments ( but service is unavailable)
Waiting for all of your valuable suggestions..

1) why was I not getting the formula right when I use & Tops
I'm assuming that BE Fixed Cost has N for IsICP, in that case you can not write to invalid intersections as it would attempt to use the same ICP information
2) Is it MANDATORY to have a Plugaccount attribute when we have IsICP turned to "R" ?
No
3) What will happen if we do not have a Plugaccount for the IsICP account ?
It will not run eliminations
4) Do we need to have the IsICP turned on to the immediate parent of the account having IsICP and the Top parents of the account too??
If you want it to rollup, yes you would need that. We have all Parent accounts as isICP set to Y and top member to ICP Entities so that they roll up
5) which will have priority the rule or the Grid where we have the calculated member like the BE Fixed Cost - because in the grid I had icptop, allcustom1,2 3 and when had & Tops to the account - I got some weird numbers...
I'm not following the question here, grids are just really a display mechanism, rules will handle all of the calculations.

Conversion exit error while activating the transfer rules

Hello gurus,
We are doing a function module extraction with 3.X data sources.
On activating the transfer rules , i am getting a conversion exit error for "0fiscyear", but in the infoobject we don't have the conversion exit for it.
Points will be awarded for any kind of response.
Thanks and Regards,
Anu.

Hi,
1. Please check in the transformation, its necessary to provide the fiscal variant mapping as well when ur mapping fiscal year object. as on the basis of that value fiscal period will be derived.
2 I guess ur doing direct mapping (Time conversion) and there is no routine written for that. if any u can check that as well for any error.
Thanks
dipika
Edited by: Dipika Tyagi on Jun 25, 2008 7:39 AM

Error in the update rules

Hi All,
I added a BUOM Unit for a keyfigure and activated the cube.While I am activating the update rules it shows the error message unit for the Keyfigure is not recognized in the update rules . Kindly let me Know what i need to do for this error.
Thanks In Advance...
Raghu

Hi,
Make sure that the mapping for the unit of your KF is also selected in update rule.
With rgds,
Anil Kumar Sharma .P

What are the different metadata fields for in the Metadata presets?

The metadata preset box has a comprehensive array of metadata sections and fields. I just don't know what a lot of them should be used for. Some of them appear to duplicate headings in other fields, albeit with different names.
Can someone tell me what kind of information the following fields are meant for?
Basic Info
Label - I've seen this used for the authors credit. The "Creator" and "Copyright" fields seem to take care of this though. Should it be used for something else?
Copy Name - ?
IPTC Content
Headline - I've read that this is for describing the content. Isn't the "Caption" field in Basic Info for this?
IPTC Subject Code - ?
Description Writer - The author/creator? If not, who?
IPTC Image
Intellectual Genre - Same as "Category"?
ISO Country Code - ?
IPTC Status
Title - This may seem obvious, but the title often appears in the caption.
Job Identifier - I'm assuming this is for applying information pertinent to the author's filing system. If I'm wrong, what is it for?
Instructions - as above?
Provider - Author again?
Source - Author yet again?
I'm sure there will be those who will argue that some or even most fields can be used for whatever information we wish to put in. My point is that they must be there for specific reasons.
Oh yes, before someone points me in the direction of the IPTC website, I've been there already and it was full of gobbledygook!
Thanks in advance.

Also on the IPTC photo metadata site is a more approach able guide to using the fields:
http://www.iptc.org/std/Iptc4xmpCore/1.0/documentation/Iptc4xmpCore_1.0-doc-CpanelsUserGui de_13.pdf
This guide was written for the original 1.0 IPTC Core specification, but I think it covers most of the terms you want to understand better. Specifically, it talks about the different roles the Headline, Title and Description (aka Caption) play as well as the Creator, Source and Provider.
Examples:
Headline:
A headline is a brief publishable synopsis/summary of the contents of the photograph. The Headline term should not be confused with the Title term.
Description:
The Description field, often referred to as a “caption” is used to describe the who, what and why of what is happening in the photograph. If there is a person or people in the image, this caption might include their names, and/or their role in the action that is taking place. If the image is of a location, then it should give information regarding the location....
Here are three other places you might want to look for or ask about how other photographers are using the metadata:
The PhotoMetadata.org web site
http://www.photometadata.org/
David Rieck's ControlledVocabulary.com
http://www.controlledvocabulary.com/
-See Resources > CV Forum to find the Yahoo! groups forum for the site.
Peter Krogh's, the DAM Book site and forum:
http://www.thedambook.com/
http://thedambook.com/smf/index.php
The "Label" field is used to control the colored label that's displayed for the file in Lightroom, Bridge and (when opening multiple files) in the Camera Raw plugin. Both Lightroom and Bridge ship with default values mapped to the six-standard label colors. In Lightroom choose the Metadata > Color Label Set > Edit... to change them. In Bridge, use the Label panel in the Bridge preferences dialog.
You can really use this for whatever you need, but unlike the other terms defined by the IPTC, you should not necessarily expect others to use them for the same thing. Putting the photographer's name there probably doesn't make much sense. I know one Photographer who's assigned the name of a stock agency to each of the label colors so he can track what file was sent to what agency.
-David

Error in update rules mapping

Hi,
I have added two new fileds into the view and then replicated in bw side.The two fields mapping correctly in Transfer rules.Getting error for two fileds while adding in the update rule.
Thanks,
Jayapal.

Hi Jayapal,
Hope, SAP Note 588247 will help you to resolve this issue. It is giving "Rule incorrect" error, may be because of Infoobject 0RECORDMODE is ignored.
Veerendra.

FatalInternalException The metadata for type "XYZ" did not come from a file,.....

Hy !
Did KODO have Problems if there is a mix of jdo metadata files in
build.dir and in external jar's while registering a Schema with the
MappingToolTask ?
We extracting all *.jdo files from additional jars to a metadata dir and
also copying all *.jdo files from the current build.dir, because KODO
only supports a single Fileset for the Metadatafiles.
The Ant Schema Task looks like:
<target name="schema-create-kodo" depends="init-kodo-schematool">
 <echo message="Schema Create for KODO"/>
 <taskdef name="kodo-schematool"
 classname="kodo.jdbc.ant.MappingToolTask"
 classpathRef="jdo.schematool.class.path"/>
 <kodo-schematool action="refresh">
 <config propertiesFile="${zeus.persistence.jdo.properties}"/>
 <fileset dir="${jdo.metadata.dir}">
 <include name="**/*.jdo" />
 </fileset>
 <classpath>
 <pathelement path="${compile.project.class.path}"/>
 </classpath>
 </kodo-schematool>
</target>
jdo.schematool.class.path: is the Path for the KODO Schematool
zeus.persistence.jdo.properties: ist the kodo.properties file
jdo.metadata.dir: is the dir with all metadatafiles
compile.project.class.path: is the classpath including a build.dir with
class files + metadatfiles and differnet additional jar files containing
also enhanced classes with corresponding metadata files
and that fails with:
[kodo-schematool] kodo.util.FatalInternalException: The metadata for
type "class com.wuerth.phoenix.bcserver.base.versan
t.PCapacityStruct" did not come from a file, and therefore we cannot
determine where to place the corresponding mapping
information. If you are using metadata from a jar or other resource,
you should use one of the other available mapping
factories.
com.wuerth.phoenix.bcserver.base.versant.PCapacityStruct comes from a
jar which also contains a metadatafile.
We are wondering because if we exlicit give a different metadata file
via a fileset the Schematool should ignore the other Metadata files
inside the jar + build.dir !?
mfg
Christian

The only Apple computers that have a Mag Safe connector are MacBook laptops (MacBook, MacBook Pro and MacBook Air).
The Mac mini 2010 and 2011 models have a standard power connector, I believe it is called an IEC C7 connector. You can see a picture of the back of the Mac mini here http://www.apple.com/macmini/design.html
Older Mac mini models prior to 2010 have a proprietary connector. While the following page is for a very old PowerPC Mac mini the connector is the same on early Intel Mac mini models as well. See http://support.apple.com/kb/HT3019

How to knw the Transfer rules of Infosource 80PUR_O01?

In AWP,
In Metadata Repository,
Taking an example,
"Vendor Evalution-0PUR_C02" Infocube we get Update rules at the bottom of the page,
from Update rules page, in the bottom of tht page we get Infosource,
Now in this Infosource page we get 'Transfer Rules'.
this is the normal procedure i suppose to find 'Transfer Rules'.
Similarly im trying out for "Purchasing Order Qty Service Level-0PUR_C07",
but im not able to get the 'Transfer Rules for ths Cube.
Please let me know the Procedure, how to find out Transfer rules for this "PO Qty Service level" Infocube................?
Regards,
Sourav

the best place to search the content objects is HELP.SAP.COM
InfoSources
2LIS_02_ITM Purchasing Data (Document Item Level) as of 2.0B
2LIS_02_SCN Allocation Schedule Line with Confirmation
2LIS_02_CGR Allocation Confirmation with Goods Receipt
2LIS_02_SGR Allocation Schedule Line with Goods Receipt
http://help.sap.com/saphelp_bw33/helpdata/en/c4/1478c35bda7b4cb5224251c84ffaa2/frameset.htm

How to create multiple segments on the target structure of an IDOC

Hi All
I am working on the Shipment Confirmation Interface( Message Type SHPCON ) which is FILE to IDOC Scenario. I have a segment called E1EDL18 which occurs only once on the target side of the idoc. Now I have to created multiple E1EDl18 segments for the Qualifiers ORI, PGI and PCK. I treid to send a constant ORI,PGI,PCK and then used an user defined function which splits the constant at COMMA and then I am assigning to the target field QUALF. In the display queue for QUALF I see three values with context but still only one E1EDL!* segment is created. Please let me know how to create multiple E1EDl18 segments for three qualifiers.
Thanks
Naga

In message Mapping, just right click on the segment and click on duplicate subtree. now it will create you another segment with same name and fields in it..
you can hard code the Qual, or you can map the required source field into it.

Network error in the business rule

Hello, Experts!
I have created a business rule, validated it but when I launch it, I get the message:
+"The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again."+
The business rule works fine once I remove the following statement from it: @MEMBER(@CONCATENATE("A_", @SUBSTRING(@NAME(@CURRMBR("Entity")),6))) but it produces this error with this statement and I cannot do without this statement to perform the required calculation.
I would be very grateful for any hints on how to resolve it!

Hi,
Try creating manually the update rule.
Regards
Rahul Bindroo

ERPI Concatenate Segment in the metadata rule Mapping Type

Similar Messages

Maybe you are looking for