ERPI Multiple Source EBS instance configurations

Hi Experts,
I have configured EBS R12 instance with FDM application using the ERPI. Now I want to configure one more EBS R112 instance as source in ERPI. Can you please tell that can I use the same ODI instance for that or I need to install the new ODI Home and need to run multiple agents or I can re-use the existing ODI. Please advise/suggest the best method to do this task. Any steps or document would be really helpful.
Thanks
-Samar-

Hello Samar,
Unfortunately the question you are asking revolves a lot around design ... and considerations need to be made based on your design implementation. For that it might be best to engage a qualified consultant .... but to answer your questions:
1. Yes you can use the same ODI instance.
2. No you do not need to run multiple agents.
Unfortunately there are no documented steps/procedures because all the information would have to be reconfigured inside of ODI ... and requires indepth ODI knowledge. Please keep in mind you posted your question to the FDM forum ... not the ODI forums.
But to try and offer some light:
ERPi talks to the 'Agent' specified in the Source System definition ... which passes to ODI a specific Context. Within that context you have defined logical and physical connections. You will just need to make sure that the context you define for this new source system has all the appropriate connections.

Similar Messages

Can we run parallel data collections to collect multiple source instance.

Hi,
We have a business requirement where we will have multiple Source(ERP) instance and single Destination(ASCP) instance. We would like to check if we will be able to run Data collections in parallel to collect multiple EPR instance in the same time window. This is to reduce the total planning process time duration as following data collections we will be required to run multiple plan runs.
Please help me with your expert comments
Rgds
Sid

You may instead use Continuous collections to save on time so it can run collections from both instances periodically throughout the day thereby reducing a single timespan to collect all the data.
Thanks
Navneet Goel
Inspirage

Streams configuration multiple source-single destination

hi all,
can we configure streams capturing changes from multiple source databases and applying at single destination?
to configure table level replication is it mandatory to enable suppliment logging foe enrire database?
is it possible to configure streams without setting GLOABAL_NAMES parameter to TURE.?
if i enable table level suppliment logging ,will my dependent objects on the table go invalid?
there may be some silly questions,PLease answer my questions.
regards
Sangeeth

>
can we configure streams capturing changes from multiple source databases and applying at single destination?yes you can, just should care about conflict resolution when multiple source tables are replicated into the same destination table.
to configure table level replication is it mandatory to enable suppliment logging foe enrire database?no, you can have it for specific tables, which are replicated.
is it possible to configure streams without setting GLOABAL_NAMES parameter to TURE.?yes, you can, but it's error-prone and will be every time pointed by Oracle Support in case of any streams problems.
if i enable table level suppliment logging ,will my dependent objects on the table go invalid?why? I didn't catch it.

Question about configuring REST web service in EBS instance

I am from EBS SCM team. From one wiki page, it says OA Framework provides REST framework to expose OAF BC4J objects as web services. Can you provide more details about how to configure REST web service for one EBS instance? Any related information is also helpful.
Edited by: 936859 on Sep 7, 2012 5:45 PM

IIRC you must activate PAPI-WS for the engine. In Studio you do it by right-clicking on the project, then "engine preferences". In enterprise/standalone you must activate PAPI-WS in the Admin Center.

How to deploy across multiple mid-tier instances

I was hoping someone may be able to point me in the right direction. We have two portal/webcache mid-tier instances on release 10G AS 9.0.4.2. On the ias_admin home page I tried to create a cluster and add the two instances to a cluster but it won't let me do it for a portal type install. If that is the case, how do people handle deploying such things as portlet providers and data sources across multiple mid-tier instances? Here is the concern from our Portal admin:
As discussed, the inability to cluster the mid-tiers will cause issues in production as we try and keep deployed portlet providers with their required configurations and datasources in synch. While deploying and configuring 1-2 mid-tiers for a given portlet manually is do-able, the chance for out of synch components or configuration settings is amplified for each additional mid-tier. If we manually deploy 5 mid-tiers and accidently mistype the datasource for example, we'll have a random error that will occur once requests are attempted to be serviced by that mid-tier. This will make troubleshooting difficult. We really need some way to deploy and configure settings one time and have these items propagated to all the other mid-tiers.
What is the best way to handle this scenario?
Regards and thanks for any info,
Chris Schumacher
Embry-Riddle Aeronautical University

Jar files are not stored on the file system
Temporary files are held in bpel/domain/default/tmp folder, whereas jar files in the dehydration store for clustered deployment.
If you configure BPEL (not AS) cluster - files will be propagated to all nodes.
MJ

Satellite L50-A-19N can't play audio from multiple sources

I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
It goes away when I plug out my headphones..
I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
25/02/14
DTS Studio Sound
DTS Inc.
Windows 8.1 - 64 Bit
1.01.2700
I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
10/02/15
Sound Driver
Integrated Device Technology Inc.
Windows 8.1 - 64 Bit
6.10.6491.0
IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
Why are toshiba releaseing old driver as 'NEW' ?
2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"

I see that the option called “give exclusive mode applications priority” has been checked.
Usually different applications and programs can access the sound card simultaneously.
For example: you can hear the sound in game, while you can run your own music via an external player.
This is prevented with these options “give exclusive mode applications priority”.
Maybe you should disable (uncheck) this option to prevent the different applications for using this exclusive mode stream.
I did it for my DAC. I set the DAC for exclusive mode. Once my audio playback software starts to play music, no other software is able to share the DAC.
However, I use Win 7 and Realtek sound driver… It’s another configuration.
So it’s not known to me if your issue is related Win 8.1 system or maybe limitation of sound driver… it could be also possible that one of your sound applications don’t allow multiple sound streaming.

Error while installing OIM, during the OC4J Instance Configuration Assistan

Hi, running RHEL 4 32Bit Linux. There's an installation of the SOA Suite 10.1.3.1 (Release 2) on /u01/app/oracle/OracleAS_1, and I am installing OIM on /u01/app/oracle/OraHome_2
Near the end of the installation, when it's installing the recommended configuration assistants, I get an error while the OC4J Instance Configuration Assistant piece is running.
Here's the full readout:
Launched configuration assistant 'OC4J Instance Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/u01/app/oracle/OraHome_2/jdk/bin/java -Djava.net.preferIPv4Stack=true -Djava.io.tmpdir=/tmp -mx512M -classpath /u01/app/oracle/OraHome_2/dcm/lib/dcm.jar:/u01/app/oracle/OraHome_2/dcm/lib/oc4j_deploy_tools.jar:/u01/app/oracle/OraHome_2/opmn/lib/opmnplugin.jar -Doracle.ias.sysmgmt.logging.logdir=/u01/app/oracle/OraHome_2/j2ee/home/log oracle.j2ee.tools.deploy.Oc4jDeploy -oraclehome /u01/app/oracle/OraHome_2 -verbose -inifile /u01/app/oracle/OraHome_2/j2ee/deploy.ini '
Start output from spawned process:
Reading ini file - '/u01/app/oracle/OraHome_2/j2ee/deploy.ini'
Adding web-app 'wirelesssso-web.war' for app 'wirelesssso'.
Adding web-app 'web.war' for app 'sso'.
Adding web-app 'ssohelp.war' for app 'sso'.
Adding web-app 'pls.war' for app 'sso'.
OC4J instance 'OC4J_SECURITY': Adding java stop command line option '-server'
OC4J instance 'OC4J_SECURITY': Adding java command line option '-Xmx512m'
OC4J instance 'OC4J_SECURITY': Adding Environment variable 'LD_LIBRARY_PATH' with value '/u01/app/oracle/OraHome_2/lib32:/u01/app/oracle/OraHome_2/lib'
OC4J instance 'OC4J_SECURITY': Adding Environment variable 'DISPLAY' with value 'oracleb.djl.com:0.0'
Adding web-app 'ui.war' for app 'oiddas'.
OC4J instance 'OC4J_SECURITY': Adding java stop command line option '-Xss1M'
Ignoring jvm command-line option '-Xmx512m'. Larger heap already specified with '-Xmx512m'
OC4J instance 'OC4J_SECURITY': Env Option 'LD_LIBRARY_PATH' already exists with value '/u01/app/oracle/OraHome_2/lib32:/u01/app/oracle/OraHome_2/lib'
Initializing DCM...done.
Creating OC4J instance 'OC4J_SECURITY' (protected)...done.
Adding dependent libraries for application 'default'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Starting OC4J instance 'OC4J_SECURITY'...done.
Deploying application 'wirelesssso' to OC4J instance 'OC4J_SECURITY'.
Notification ==> Application Deployer for wirelesssso STARTS [ 2006-11-27T17:20:23.691EST ]
Notification ==> Undeploy previous deployment
Notification ==> Removing files for app file:/u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/wirelesssso.ear
Notification ==> Copy the archive to /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/wirelesssso.ear
Notification ==> Unpack wirelesssso.ear begins...
Notification ==> Unpack wirelesssso.ear ends...
Notification ==> Initialize wirelesssso.ear begins...
Notification ==> Initialize wirelesssso.ear ends...
Notification ==> Initialize wirelesssso-web begins...
Notification ==> Initialize wirelesssso-web ends...
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/wirelesssso.ear
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/wirelesssso/wirelesssso-web.war
Notification ==> Application Deployer for wirelesssso COMPLETES [ 2006-11-27T17:20:24.193EST ]
Deploying application 'oiddas' to OC4J instance 'OC4J_SECURITY'.
Notification ==> Application Deployer for oiddas STARTS [ 2006-11-27T17:20:24.246EST ]
Notification ==> Undeploy previous deployment
Notification ==> Removing files for app file:/u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/oiddas.ear
Notification ==> Copy the archive to /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/oiddas.ear
Notification ==> Unpack oiddas.ear begins...
Notification ==> Unpack oiddas.ear ends...
Notification ==> Initialize oiddas.ear begins...
Notification ==> Initialize oiddas.ear ends...
Notification ==> Initialize ui begins...
Notification ==> Initialize ui ends...
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/oiddas.ear
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/oiddas/ui.war
Notification ==> Application Deployer for oiddas COMPLETES [ 2006-11-27T17:20:28.312EST ]
Deploying application 'sso' to OC4J instance 'OC4J_SECURITY'.
Notification ==> Application Deployer for sso STARTS [ 2006-11-27T17:20:28.351EST ]
Notification ==> Undeploy previous deployment
Notification ==> Removing files for app file:/u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso.ear
Notification ==> Copy the archive to /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso.ear
Notification ==> Unpack sso.ear begins...
Notification ==> Unpack sso.ear ends...
Notification ==> Initialize sso.ear begins...
Notification ==> Initialize sso.ear ends...
Notification ==> Initialize web begins...
Notification ==> Initialize web ends...
Notification ==> Initialize ssohelp begins...
Notification ==> Initialize ssohelp ends...
Notification ==> Initialize pls begins...
Notification ==> Initialize pls ends...
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso.ear
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso/web.war
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso/ssohelp.war
Notification ==> deleting: /u01/app/oracle/OraHome_2/j2ee/OC4J_SECURITY/applications/sso/pls.war
Notification ==> Application Deployer for sso COMPLETES [ 2006-11-27T17:20:29.806EST ]
Calling updateConfig to notify DCM of new deployments...done.
Adding OC4J mount points for application 'wirelesssso'...done.
Adding OC4J mount points for application 'oiddas'...done.
Adding dependent libraries for application 'sso'...done.
Adding OC4J mount points for application 'sso'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Binding web app 'wirelesssso-web' to default-web-site for application 'wirelesssso' in OC4J instance 'OC4J_SECURITY'
Web app 'wirelesssso-web' bound successfully.
Binding web app 'ui' to default-web-site for application 'oiddas' in OC4J instance 'OC4J_SECURITY'
Web app 'ui' bound successfully.
Binding web app 'web' to default-web-site for application 'sso' in OC4J instance 'OC4J_SECURITY'
ERROR: Caught exception while binding web app 'web' to default-web-site:
Calling updateConfig to notify DCM of new web-bindings...java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: Disconnected: RMIConnection Disconnected
     at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:31)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:139)
     ... 8 more
Caused by: com.evermind.server.rmi.OrionRemoteException: Disconnected: RMIConnection Disconnected
     at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1621)
     at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1572)
     at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:55)
     at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
     at __Proxy0.bindWebApp(Unknown Source)
     at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:28)
     ... 9 more
done.
Adding application 'wirelesssso' to the DCM repository...done.
Application 'wirelesssso' deployed successfully.
Adding application 'oiddas' to the DCM repository...done.
Application 'oiddas' deployed successfully.
Undeploying application 'sso' from OC4J instance 'OC4J_SECURITY'.
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: IOException communicating with the remote server: Connection reset
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
     ... 8 more
Caused by: java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2508)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2361)
     at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1800)
     at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:725)
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:106)
     ... 8 more
FAILED!
ERROR: Caught exception while undeploying 'sso' from 'OC4J_SECURITY':
Removing OC4J mount points for application 'sso'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Calling updateConfig to notify DCM of undeployments...done.
Stopping OC4J instance 'OC4J_SECURITY'...done.
Calling SMI to retry init of failed plugins...done.
Terminating DCM...done.
Copying /u01/app/oracle/OraHome_2/j2ee/deploy.ini to /u01/app/oracle/OraHome_2/j2ee/deploy.ini.1164667126315.bak.
Writing any undeployed entries back to /u01/app/oracle/OraHome_2/j2ee/deploy.ini.
Oc4jDeploy tool completed, but with errors.
End output from spawned process.
Any help is appreciated, thanks!

Hi, did you ever resolve this problem? We've got the same error.
Cheers,
Eystein

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process.

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process. I have a client application which will prepare number of source files and some meta data information (in .XML) which will be used in header/footer. Is it possible to put a run time generated DDX file in the watch folder and use it in Process. If possible how can I pass the file names in the DDX. Any sample Process will be very helpful.

If possible, make use of Assembler API in your client application instead of doing this using watched folder. Here are the Assembler samples : LiveCycle ES2.5 * Programming with LiveCycle ES2.5
Watched folder can accept zip files (sample : Configuring a watched folder to handle multiple input files and write results to a single folder | Adobe LiveCycle Blog ). You can also use execute script to create the DDX at runtime : LiveCycle ES2 * Application Development Using LiveCycle Workbench ES2
Thanks
Wasil

Error in ODI ,using source EBS and target planning

Hi,
I am in FDM ERPI integrator,source is EBS and target is Planning ,I didn't get the data from source and I got this below error,
Execution error :
java.lang.Exception :the scenario did not end properly.
at.java.lang.Thread.run(Unknown Source)
pls help me on this situation.
regards,
SV

Hi There,
I am trying to extract metadata out of EBS and target is Essbase. Everything is setup and connection working fine.
My problem is that the chart of accounts is getting built in Essbase as a flat structure? How do I get the roll ups from EBS into Essbase? Is there a certain seeting that I must choose to be able to build the Parent Child relationships?
Thanks for the help
Regards
Henk

OC4J Instance Configuration Assistant Failed during SSO install

Hi,
I am building a Oracle Portal on Linux Server, at step of SSO installation i reached an error *"OC4J Instance Configuration Assistant Failed"* .
In the log file i found that :
Calling updateConfig to notify DCM of new deployments...done.
Adding OC4J mount points for application 'wirelesssso'...done.
Adding OC4J mount points for application 'oiddas'...done.
Adding dependent libraries for application 'sso'...done.
Adding OC4J mount points for application 'sso'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Binding web app 'wirelesssso-web' to default-web-site for application 'wirelesssso' in OC4J instance 'OC4J_SECURITY'
Web app 'wirelesssso-web' bound successfully.
Binding web app 'ui' to default-web-site for application 'oiddas' in OC4J instance 'OC4J_SECURITY'
Web app 'ui' bound successfully.
Binding web app 'web' to default-web-site for application 'sso' in OC4J instance 'OC4J_SECURITY'
ERROR: Caught exception while binding web app 'web' to default-web-site:
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: Disconnected: RMIConnection Disconnected
     at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:31)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:139)
     ... 8 more
Caused by: com.evermind.server.rmi.OrionRemoteException: Disconnected: RMIConnection Disconnected
     at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1621)
     at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1572)
     at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:55)
     at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
     at __Proxy0.bindWebApp(Unknown Source)
     at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:28)
     ... 9 more
Calling updateConfig to notify DCM of new web-bindings...done.
Adding application 'wirelesssso' to the DCM repository...done.
Application 'wirelesssso' deployed successfully.
Adding application 'oiddas' to the DCM repository...done.
Application 'oiddas' deployed successfully.
Undeploying application 'sso' from OC4J instance 'OC4J_SECURITY'.
java.lang.reflect.InvocationTargetException
FAILED!
ERROR: Caught exception while undeploying 'sso' from 'OC4J_SECURITY':
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: IOException communicating with the remote server: Connection reset
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:121)
     ... 8 more
Caused by: java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2508)
     at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2361)
     at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1800)
     at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:725)
     at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:106)
     ... 8 more
Removing OC4J mount points for application 'sso'...done.
Calling SMI to save changes.
SMISession.saveChanges succeeded.
Calling updateConfig to notify DCM of undeployments...done.
Stopping OC4J instance 'OC4J_SECURITY'...done.
Calling SMI to retry init of failed plugins...done.
Terminating DCM...done.
Copying /u01/oracle/OraHome_1/j2ee/deploy.ini to /u01/oracle/OraHome_1/j2ee/deploy.ini.1342977480035.bak.
Writing any undeployed entries back to /u01/oracle/OraHome_1/j2ee/deploy.ini.
Oc4jDeploy tool completed, but with errors.
Can any one solve it.
Thanks very much!

Use physical disks, not NFS mounts. But you are still restricted to a 10.2 database max. SSO won't install in an 11g database with the repca tools from IDM 10.1.2 and 10.1.4.

OC4J instance configuration assistant failed

Hi,
I installed oracle 11g 11.1.0.7 database,weblogic server 10.3.2 and identity management 11.1.1.1.0.Till this every thing is fine.
Next i created schema using sso-metadata repository of 11.1.1.1.0 and it also went fine. Now i am trying to install OSSO of 10.1.4.0.1 on it but during this the OC4J instance configuration assistant is getting failed.
I checked in the log files and i found this.
Binding web app 'web' to default-web-site for application 'sso' in OC4J instance 'OC4J_SECURITY'
ERROR: Caught exception while binding web app 'web' to default-web-site:
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
     at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
Caused by: com.evermind.client.orion.AdminCommandException: Disconnected: Connection reset
     at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:31)
     at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:139)
     ... 8 more
Caused by: com.evermind.server.rmi.OrionRemoteException: Disconnected: Connection reset
     at com.evermind.server.rmi.RMIConnection.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMIConnection.java:1621)
     at com.evermind.server.rmi.RMIConnection.invokeMethod(RMIConnection.java:1572)
     at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:55)
     at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:22)
     at __Proxy0.bindWebApp(Unknown Source)
     at com.evermind.client.orion.BindWebAppCommand.execute(BindWebAppCommand.java:28)
     ... 9 more
Calling updateConfig to notify DCM of new web-bindings...done.
In the oc4j~oc4j-security log file I found this:
SSO: Initializing the encryption objects failed
09/12/16 07:36:38 oracle.security.sso.server.conf.ConfigurationException: Invalid SSO DB schema information
09/12/16 07:36:38      at oracle.security.sso.server.conf.DatabaseConfigReader.init(DatabaseConfigReader.java:418)
09/12/16 07:36:38      at oracle.security.sso.server.auth.AuthUtil.init(AuthUtil.java:194)
09/12/16 07:36:38      at oracle.security.sso.server.ui.SSOLoginServlet.init(SSOLoginServlet.java:284)
09/12/16 07:36:38      at javax.servlet.GenericServlet.init(GenericServlet.java:258)
09/12/16 07:36:38      at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2354)
09/12/16 07:36:38      at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4795)
09/12/16 07:36:38      at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4889)
09/12/16 07:36:38      at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1015)
09/12/16 07:36:38      at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:549)
09/12/16 07:36:38      at com.evermind.server.Application.getHttpApplication(Application.java:890)
09/12/16 07:36:38      at com.evermind.server.http.HttpServer.getHttpApplication(HttpServer.java:707)
09/12/16 07:36:38      at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:625)
09/12/16 07:36:38      at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:278)
09/12/16 07:36:38      at com.evermind.server.http.HttpServer.setSites(HttpServer.java:278)
09/12/16 07:36:38      at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:179)
09/12/16 07:36:38      at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2394)
09/12/16 07:36:38      at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1551)
09/12/16 07:36:38      at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:92)
09/12/16 07:36:38      at java.lang.Thread.run(Thread.java:534)
09/12/16 07:36:38 SSO: FAILED TO START SSO SERVER!
Can anyone help me to solve this problem.
Thanks&Regards,
Rajesh

Results from our TAR:
1. There is an updated deinstall document available on Metalink that details in greater detail how to completely remove 9iAS from Windows NT/2000.
2. The middle-tier machine cannot be named "portal." The name is reserved by 9iAS R2. Now if only the installer could catch reserved names ... a note to this effect in the installation docs would be nice as well. I believe the infrastructure machine cannot be called "iasdb" as that name is also reserved but I'm not about to find out.

Multiple AD FS instances in single forest

Hi, thank you for reading this. I have a little design question about AD FS. The current situation is like this:
One forest, root domain: domain.lan
domain.lan contains all user objects
Three child domains: 1.domain.lan, 2.domain.lan and 3.domain.lan
AD FS 2.0 server is deployed in domain.lan
Customer wants an extra AD FS instance for testing purposes.
I do find some recommendations on the internet, but I still have a few questions:
Is it true that only one AD FS server (or farm) per forest can be deployed?
I read that I can have multiple AD FS instances, but not in the same domain. Should I move the current AD FS server to 1.domain.lan (Because the current AD FS server also automatically supports the child domains) and add an AD FS server for testing
purposes to 2.domain.lan?
Is the configuration as suggested in point 2 supported by Microsoft?
Thanks!
Regards,
Baksteen

Hi Mike,
thank you for your response. I also find the link you provided and it is says that it should be possible, but that only one instance can be active.
In this thread the same user (Mylo) says it is possible:
http://social.msdn.microsoft.com/Forums/exchange/en-US/3c8903c8-d6d6-471d-9966-b23c83172a40/active-directory-federation-services-question-can-i-run-two-seperate-adfs-instances-in-my-domain
In this thread they talk about one instance per forest:
http://serverfault.com/questions/554199/are-multiple-adfs-instances-needed-when-federating-to-the-same-party-multiple-ti
In this link they say it should be possible with some downsides:
http://serverfault.com/questions/280311/is-there-any-downside-to-having-two-adfs-servers-in-a-domain
In this link they say it is not possible:
http://community.office365.com/en-us/f/613/t/82093.aspx
So, I am a little confused now. My questions therefore is, can I have multiple AD FS instances in a forest/domain? And is it supported by Microsoft?
Thanks again!

Compile multiple source files

sorry, this is maybe a newbie question.
but iI have a problem compiling an application that use multiple sources files
for exemple
the class A is in the file 1
the class B is in the file 2
class A uses an instance of the class B
class B uses an instance of the class A
so i'm unable to compile these files coz each one tells me he doesn't know about the other
Is there a way to define prototypes of class or fonctions before their use like in C/C++?
Or is there another way i didn"t pay attention
thanks all

This is a minimal explanation of packages. For a full explanation of packages and how to compile and run Java programs, see this page:
http://java.sun.com/j2se/1.4.2/docs/tooldocs/tools.html
and read the Setting the Classpath and the How Classes are Found topics.
Assume that your programs are part of a package named myapp, which is specified by this first line in each source file:
package myapp;
Also assume that directory (C:\java\work\) is listed in the CLASSPATH list of directories.
Also assume that all your source files reside in this directory structure: C:\java\work\myapp\
Then a statement to compile your source file named aProgram.java is:
C:\java\work\>javac myapp\aProgram.java
And a statement to run the program is:
java myapp.aProgram
(This can be issued from any directory, as Java will search for the program, starting the search from the classpath directories.)
Explanation:
Compiling
A class is in a package if there is a package statement at the top of the class.
The source file needs to be in a subdirectory structure. The subdirectory structure must match the package statement. The top subdirectory must be in the classpath directory.
So, you generate a directory structure C:\java\work\myapp\ which is the [classpath directory + the package subdirectory structure], and place aProgram.java in it.
Then from the classpath directory (C:\java\work\) use the command: javac myapp\aProgram.java
Running
Compiling creates a file, aProgram.class in the myapp directory.
(The following is where people tend to get lost.)
The correct name now, as far as java is concerned, is the combination of package name and class name: myapp.aProgram (note I omit the .class) If you don't use this name, java will complain that it can't find the class.
To run a class that's NOT part of a package, you use the command: java SomeFile (assuming that SomeFile.class is in a directory that's listed in the classpath)
To run a class that IS part of a package, you use the command java myapp.aProgram (Note that this is analogous to the command for a class not in a package, you just use the fully qualified name)

Best Practive - One mapping reading multiple source files

I want to develop a solution for one single mapping reading multiple similar source files that are stored on different directories on my OWB server. I want to be able to determine on runtime of my mapping from what location to load the source file from.
Example:
Mapping: Load_test_data
source file 1: c:\input\loc1\test.dat
source file 1: c:\input\loc2\test.dat
When I run the mapping I would like to use an input parameter specifying the location loc1 or loc2. I would also like to use this input parameter in my mapping to populate one column in my target table with the value of this input parameter. This design would make it possible to dynamically load source files from different directories and also being able to see after loading where the data came from.
Questions:
- Is there a way to create such a design
- If not, what alternative would be appropriate.
Thanks in advance for the feedback

Thanks for the feedback. Unfortunately I do not use workflow together with my OWB.
I now indeed specified the file name and file location in the configuration of my mapping. However I am not able to change then upon executing the mapping. Data file name and file location are empty and greyed out when I execute my mapping. It always takes the values I specified in the configuration of my mapping
What I would like to do is specify the location upon runtime when I execute my mapping, but I don't know if this is possible. In addition I'd also want to use the data file location as an input parameter for one of the columns I populated in my target table.
Then in the end I would be able to use one mapping and read multiple sources files from different locations and also be able to check in the end where the data was loaded from.
Hope you can give me some more feedback on how to set this up in OWB.
Many Thanks!
data file name parameter to ma

SLT Replication for the same table from Multiple Source Systems

Hello,
With HANA 1.0 SP03, it is now possible to connect multiple source systems to the same SLT Replication server and from there on to the same schema in SAP HANA - does this mean same table as well? Or will it be different tables?
My doubt:
Consider i am replicating the information from KNA1 from 2 Source Systems - say SourceA and SourceB.
If I have different records in SourceA.KNA1 and SourceB.KNA1, i believe the records will be added during the replication and as a result, the final table has 2 different records.
Now, if the same record appears in the KNA1 tables from both the sources, the final table should hold only 1 record.
Also, if the same Customer's record is posted in both the systems with different values, it should add the records.
How does HANA have a check in this situation?
Please throw some light on this.

Hi Vishal,
i suggest you to take a look to SAP HANA SPS03 Master Guide. There is a comparison table for the three replication technologies available (see page 25).
For Multi-System Support, there are these values:
- Trigger-Based Replication (SLT Replication): Multiple source systems to multiple SAP HANA instances (one source system can be connected to one SAP HANA schema only)
So i think that in your case you should consider BO Data Services (losing real-time analytics capabilities of course).
Regards
Leopoldo Capasso

ERPI Multiple Source EBS instance configurations

Similar Messages

Maybe you are looking for