ERPsim Academic Version 2009-2010 : Video preview

Hello,
We just posted on youtube a video about the new academic version of ERPsim for 2009-2010:
http://www.youtube.com/watch?v=qzqiRsuY4gg
Important dates for ERPsim:
July 20th 2009 : Release of the new version of ERPsim and new SAP client to the UCCs.
August 1st 2009 : Electronic desk copies of the revised ERP Simulation Game Participant's guide (now distributed by Pearson Education ISBN 013510999X) will be available to faculty.
August 7th 2009 : Slides and Job aid for the new distribution game will be available on the UAC portal. The distribution game can be use free of charge by members of the SAP University Alliance. Faculty are required to be certified on ERPsim.
August 7th 2009 : New version of the ERPsim Learning Portal will be available for faculty. On this learning portal, it will be possible to learn how to use the latest functionalities of ERPsim and get access to all faculty material for the manufacturing game.
Prof Pierre-Majorique Léger, Ph.D.
Director ERPsim Lab
HEC Montréal

Hi Tony,
Just curious how did it go - I am interested also.
Thanks
Naved

Similar Messages

ERPsim 2009-2010 : Sneak peek

In this video, Derick Lyle offers a sneak peek at the new outsourcing and warehousing functionalities of 2009-2010 version of ERPsim :
http://www.youtube.com/watch?v=C0_2C0mBv4g
More information about the 2009-2010 ERPsim version will be presented at the faculty traning in Montreal in June 09. New faculty video training will be available in the summer for instructor already trained on the simulator.
Regards,
Prof. Pierre-Majorique Léger, Ph.D.
Director
ERPsim Lab

Hi Tony,
Just curious how did it go - I am interested also.
Thanks
Naved

Unable to use the video or call feature on Live Messenger version 2009

Since installing version 2009 I am not not able to use the video or call feature. I am getting the below messages.
1)Your computer does not have a sound card, or a sound card is not selected.
2)Messenger is not available right now. Please try again later. (0x8ac70004)
3)Unable to run audio or video setup from Live messenger
My Laptop is a Toshiba Satallite A105-S4334 model.I am using Windows XP 2002, SP3.What must I do to correct this problem?

Hi abyfate,
Thanks for visiting Apple Support Communities.
You may find the steps in this article useful for troubleshooting your cellular connection:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Regards,
Jeremy

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

Firewire Output for Video Preview Intermittent

I'm experiencing a frustrating problem with After Effects these days.
We're producing some video to be projected, so to see what the final output will really look like, I'm doing video previews using FireWire so output goes directly to the projector.
It's been working great up until yesterday. Was working fine until I had to restart my Mac. Upon reboot, my the projector no longer gets any video output.
I've tried restarting numerous times, checked all connections, etc. Got it working again after several restarts, but after switching over to Photoshop momentarily, the video output once again disappeared.
Any suggestions on how to regain consistent Firewire output for Video Previews?
My setup:
After Effects CS6
Mac Pro
OSX Version 10.7.5
Firewire Output of my Mac's monitor is going to the Firewire Input on my Sony Media Converter
RCA Video out (Composite video) going to the projector's video input.
After Effects Video Preview preferences:
Output Device: FireWire
Output Mode: Apple FireWire NTSC

Thanks for your reply, Rick.
I finally figured it out... I had a background application running called iCam that monitors my security cameras. I had forgotten that it uses Firewire and was intermittently hogging the resources. Once I quit that application, everything was good once again.
Thanks for taking the time to respond, much appreciated!
Mike

No video Preview During Capture

Here is the scoop:
Adobe Premeire CS5
Windows 7 64bit
Canon XL2
Capturing DV NOT HDV
Canon standard device control as there is no preset listed for the XL2
Video and audio actually captures fine. I can hear audio during capture but cannot see any video.
I know there is no video preview when capturing HDV but I am capturing DV.
Again this is CS5 NOT 5.5 so .dll fix is not an option
Thanks in advance.

FIXED!
Heres how it went:
Went to Device Manager and let windows look for an updated driver for my Graphics Card (Radeon HD 4200). Windows said the most current driver was installed. It was NOT the most current driver. I went out to ATI and got the most current driver, installed, reboot and OH JOY! I get video in the capture window during preview AND during capture (of DV)!
I also let windows (device manager) look for updated drivers for sound and it said the driver was the most current. Again, it was not. so the moral of the story is...Don't trust Device Manager on current driver versions.
Hope this will help some folks out there.
Side Note*
Most of us spend hours on forums looking for answers/fixes to particular problems. Most replies I see are either in the vein of "I have that problem too" or " try this, it worked in this OTHER version or try this OTHER software" etc. If you dont have an answer/fix for the problem, dont post.
ON the flip side of that, when posting a problem you want an answer to, Give all the pertinent information in your initial question. " Premiere crashes when I plug up my camera" does NOT suffice! What version of Premiere, what camera, what OS, What kind of connection, etc.

FCPX 10.0.3: no video preview, crash

Hi all,
I have just updated FCPX 10.0.2 to 10.0.3 and it is a disaster.
The video preview is not working anymore: when i try to view one video from my events and pass the mouse over one, i hear the video sound, the time progressing but nothing appears in the video preview. If i try to play it (using the play button), FCPX hangs. I have to kill it.
It is the same when i edit a project: no video preview at all. It is very strange.
I tried a new project, import new videos, trash the prefs, reinstall FCPX from scratch with no events no projects, even make the lion combo 10.7.3 update (I updated lion the day before)...
My FCPX is useless. Do you have any advice that may help me?
Is it possible to roll back to 10.0.2 version via the mac app store?
My config; MBP Mid2009 15" (GPU 9600MGT).
Regards,
Chris.

ANYONE???
FWIW, I seem to be having similar issues. Used 10.0.3 for the first time earlier today (under Snow Leopard, on an 8-core Mac Pro now with 24GB of RAM). Constantly losing video -- audio plays fine. Never seemed to have this problem in 10.0.2. (Lots of other problems, mind you -- just not this one.)
Found I can usually get video back by opening Playback Prefs and making a change (like switching between "use proxy media" and "use original/optimized"), then waiting 2-3 minutes while the orange bar which has now appeared over the ENTIRE timeline -- even though NO changes have been made to the timeline whatsoever -- slowly goes away.
One of the triggers for losing the video in my case seems to be letting the Timeline play through till past the end. And I say "past" the end, because there's now suddenly a weird 2-3 minute void after the final clip of video. No audio, no "gap clips", just a big stretch of nothing. I can't figure out how to get rid of it, and the fade out I'd applied long ago to the last video clip no longer works. When the playhead reaches that transition (or nears the end of the last video clip, even with the transition removed) the video just cuts to black. The audio then ends normally while the playhead just keeps going into this mysterious blank emptiness for almost 3 minutes -- at least that's how much extra black I get when I do an Export of the Project.
Naturally I've tried re-doing the end transition; and have of course made sure there is no media of any kind down at the end of timeline which might be causing this strange empty section. Even tried carefully selecting all the real clips on the Timeline and Copy/Pasting them into a whole new project. No difference. The gap at the end just reappears.
(Meantime, as others have reported, I also experienced loss of parameters on several simple titles in Projects created in 10.0.2 and updated/imported into 10.0.3. Likewise for the irrational re-re-re-re-re-re-re-re-re-re-re-re-rendering. Have not yet had time to test any of this on a newly-created 10.0.3 project, but I really do look forward to the day when the bulk of my work in FCP-X might actually involve editing, with the time spent in trouble-shooting and unpaid beta-testing perhaps reduced to just a few hours a week. A crazy idea, I know -- but I can still dream.)
John B
Toronto

Video preview not working

When working on a project, the video preview is no longer working, neither for individual video preview or for overall preview of the project video composite. I have no idea what to do. It worked before. I am on Windows 7 64 bit with Premiere Elements 10.

jhughthomas
Since you are a Premiere Elements 10 user with a display problem, the first order of business is to determine if your computer uses a NVIDIA GeForce video card/graphic card. The Announcement at the top of this forum tells it all, the problem and the how to fix. For your convenience, the following is a copy/paste of that Announcement.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are
experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of
troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained
workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce
video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card
driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as
March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any
corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for
the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
If you fall into the Premiere Elements 10 NVIDIA GeForce display problem, then your answer is to roll back your card driver
(typically that has been requiring roll back to about May 2013). This factor needs to be ruled in or out at the onset of the
troubleshooting plan.
Equally important questions include:
a. If you start a new project, do you have the same problem?
b. If you use the same source video in the project with or without going to a new project, do you have the same problem?
We will be watching for your progress. Please do not hesitate to say if you need clarification on anything written.
Thank you.
ATR

R3D, RED files based project showing no video preview after reinstalling CS6. Solution!

Hello Friends,
I just came across with a problem which happened with my RED R3D RAW Files shot on RED EPIC Camera and managed to solve it in a simple click after wasting many hours, so thought why not to share this on adobe forum so others can save time.
Problem was :-
I made a project in Primer pro CS6 with RED RAW R3D files and later I had to reinstall CS6. Later when I tried opening my same project which consist of R3D RED RAW files. The project opened successfully but I red files was seen but with no video preview, importing the new RED files where working fine but the old files which was imported when I made the project they where not playing at all.
Solution:-
You can select all you RED R3D Files and go to source settings, Click Reload from RMD. Problem Solved!!!
I hope this small write up will be helpful to some of you out their.
Cheers,
Saurabh Pandey.

I have verified this problem. After Effects CS6, Premiere Pro CS6, and Adobe Media Encoder CS6 experience problems with RED .r3d files on Mac OS X 10.10 Yosemite.
More specifically, the ImporterREDServer process used by these applications is failing to launch or crashing. You may be able to import and use some .r3d files for a short time, but once the ImporterREDServer process crashes, frames from imported files won't be returned, and importing new files will result in error messages.
We are investigating the problem.
This problem does not occur in the CC or CC 2014 versions of After Effects, Premiere Pro, or Adobe Media Encoder on Mac OS X 10.10 Yosemite. If you do not have access to these versions, my suggestion for workarounds are to transcode the .r3d files to a different format (ex., QuickTime with ProRes or other high quality intermediate codec) or roll back to Mac OS X 10.9.

Video Preview | Photoshop for Video | Adobe TV

In this Photoshop for Video podcast, Richard Harrington looks at the ability to export a video preview directly out of Photoshop directly to a monitor supporting SD input.
http://adobe.ly/zdkVwP

My version of Photoshop ( 13.0.1 x 64) doesn't have this option listed in the File/export menu. Am I missing something?

Having trouble disabling video previews

I have Adobe Premiere Pro CS4 and 1.5. I recently upgraded to Windows 7 from Windows Vista. While on Vista I only had 1.5 running on my computer. Since upgrading to Win7, I noticed that when I upload a video file into the timeline, I am forced to render a video preview file. I don't remember how to disable this so that I can go back to realtime editing. I am also having the same issue with Premiere CS4. Does anyone know how to disable preview renders in both of these versions of Premiere?

I have been using the proper file formats. Problem is I didn't have this issue before in which I would get a red line on my timeline that force me to render my project everytime I added a new scene. Only times I've ever had to render are through the use of transitons and filters. I'm not doing anything differently than I have before.

My project will only build an EXE in 8.5 but not 8.6, 2009, 2010, or 2011

Hi there.
I have come across bug in the LabVIEW programming enviroment.
I have a project that consists of about 600 VI's... ie very large.
The project compiles and runs perfectly fine and I can create an EXE in Windows 7 or Windows XP using LabVIEW 8.5 that works perfectly fine.
I can then take take this project and import it into 8.6, 2009 , 2010, or 2011 (after a very long time manually opening most of the vis and saving them - as the automatic method causes it to crash) - but once imported and updated the project runs fine in each of these newer versions of labVIEW.
The problem arises when I try to compile the project into an EXE...(using any labVIEW 8.6 or higher)
the first error (or feature? who knows) is that instead of creating an EXE with the project name it instead creates a FOLDER witht the project name and proceeds to copy all the vis into this folder,... - i assume it must be part of the newer compile features and that after 5-10 mins it might delete those when it finally creates a EXE... but instead at the end it gives me a compile errror message saying it cannot save a Vi with a bad or missing block diagram.. (but the vi in question is fine when I open it, and it runs fine...no missing diagram etc)..
Normally in 8.5 I get the *.EXE and an *.alias file, and a *.ini and a folder called data with some dlls in it...
but in any later labview version the EXE fails to compile and I get random errors...
The 1502 error is the the most common..
but I get others too, haven't saved them all -
but error 6 has occured a few times...
Errors Codes
===============
Possible Reasons
================
An error occurred while saving the following file:
C:\[Calibre Backup]\02-OPC\2012-03-21- 8.6 US-58-OPC-F\Ecoustic Grader sub-vis\Ecoustic Grader grade board.vi
Invoke Node in AB_Source_VI.lvclass:Close_Reference.vi->AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
<APPEND>
Method Name: <b>Save:Target Instrument</b>
Details
=======
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 1502 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: Cannot save a bad VI without its block diagram.
============================================
Attachments:
details.png ‏22 KB

Hi everyone, thanks for the help, but its getting rediculous for me....
I've done EVERYTHING that NI engineers on the phone and others have said..
in every permutation and combination as well...
I'm pretty sure the problem lies with labview not my code...
I've recoded the "problem" vi code from scratch... it runs fine in development mode..there are no broken arrows anywhere, and no missing block diagrams.
So as far as labview is concerned there shouldn't be a problem....
There must be a fundamental change from LabVIEW 8.5 to the other versions on the way the project gets built because this code works perfect in 8.5, but results in an error in later versions ONLY when Building - NOT WHEN RUNNING in DEVELOPMENT MODE....
Also there cannot possibly be a "conversion" error as some have suggested from earlier LabVIEW versions because I hand coded the "problem" vi from scratch in labview 2010 sp1 in case there was some sort of corruption with the vi the error code mentions.
There are no unused parts of the block diagram or code that does nothing as people have suggested..
(BTW the exact same issue happens in 8.6.1, 2009, and 2011 regardless. I just perfer to work in 2010 because its the last version of Labview that the same version of DAQmx will also work with 8.5)
When I go to make an exe of the project it again complains of the same error.
except this time it says the "grade board v2.vi" is the problem - the one that I rebuilt in LabVIEW 2010sp1
(BTW I do get this same error code 19 times out of 20)
Is there someone that knows exactly what this error refers to?
is there some way that the build process has changed from 8.5?
When I enable debug mode, this doesn't help as the final exe has a broken arrow
Attachments:
grade board v2 error.gif ‏16 KB

Problems with Final Cut Pro HD Academic Version?

Is anyone out here having problems with the academic version of Final Cut Pro?
1) Erratic capturing capability---Was able to capture for a few days, and now audio isn't in sync with video during playback.
2) Sudden shutdowns of program
3) Dropped frames
4) Scratch disk QT files were in sync, and now they're playing sluggishly, indicating dropped frames.
I'm no expert, but I've never had such erratic problems with a software program before. I'd appreciate any help anyone can give me. I've taken my computer in and gotten a second hard drive, had our operating system reinstalled.
Power Mac 7, 2 Mac OS X (10.4.9) 1.8 GHz 512 MB

Please do not double post. It confuses the natives, divides the responses and will not get you an answer any faster.
Your original thread is >>HERE<<
x

Determining Academic Version of FCE HD 3.0

Hello/ Bonjour,
First I want to compliment you on this informative forum.
After reading through about 30 pages of posts with answers, I have learned that the copy of FCE HD (ver. 3.0) that I found “un-opened” at my school will not work on my one-year-old 24-inch iMac (2.66 GhZ Intel Core 2 Duo; 4GB 1067 MHz DDR3), which is running Snow Leopard (10.6.3). So I plan to purchase FCE 4.
Here are my questions:
How can I determine whether or not this is an academic version with not upgrade path or a full commercial version for which I can purchase the upgrade to FCE 4? (The install DVD is labeled Final Cut Express HD Install: Version 3.0; and the labels with serial numbers at the bottom of the “Installing Your Software” pamphlet say FINAL CUT EXPRESS HD RETAIL).
Will I be able to use the 2 LiveType Data discs from this older version with the newer version of LiveType that will come with FCE 4?
Since the iMac has only one Firewire port, which will be in use to capture video from my Canon GL2, what will be my best strategy for managing projects; archived content; and my scratch disk needs? I was hoping to keep everything on an external drive, but this will need to be a USB drive. I have about 520 GB available on my 640 GB drive.
Thanks in advance.
Jim McAndrew

Hi(Bonjour)!
Jim McAndrew wrote:
How can I determine whether or not this is an academic version with not upgrade path or a full commercial version for which I can purchase the upgrade to FCE 4? (The install DVD is labeled Final Cut Express HD Install: Version 3.0; and the labels with serial numbers at the bottom of the “Installing Your Software” pamphlet say FINAL CUT EXPRESS HD RETAIL).
The academic should have a label on the box (same for Non For Resale version-NFR).
Will I be able to use the 2 LiveType Data discs from this older version with the newer version of LiveType that will come with FCE 4?
Yes. Run the livetype install from the FCE 3.0 disk. The current LT app is the same as this one and you'll get the full content.
Since the iMac has only one Firewire port, which will be in use to capture video from my Canon GL2, what will be my best strategy for managing projects; archived content; and my scratch disk needs? I was hoping to keep everything on an external drive, but this will need to be a USB drive. I have about 520 GB available on my 640 GB drive.
You can run FCE and capture on the internal but it's far better to use a dedicated external for video storage. You can daisychain the camcorder to the firewire on the external. Some Canon cameras have problem with daisychaining. If, so, capture on the internal and move capture files to the external.
Thanks in advance.
Welcome to the forum.
Michel Boissonneault

Outlook 2010 Technical Preview and Blackberry Desktop Manager

Hi There, This is my first post in this forum, requesting you to kindly help as I am really stuck. Coming back to the issue, I have recently installed the MS Office 2010 Technical Preview and am very much enjoying the same. However, I failed to make my Blackberry Desktop Manager 5 work with it, so am unable to sync my BB now Please help. Regards,

Hi and welcome to the forums!
Because you're using software that is not yet official, its in your own hands. I'm pretty sure that the Desktop Manager software is not yet compatible with Office 2010 as it's not yet an official release. Unfortunately this is the catch with using beta software or technical previews. Software developers must rewrite their software to ensure it is compatible with that software and because there can often be changes between the beta or technical preview and the final version, many software developers prefer to wait until the official version is out before releasing their own fully compatible program.
At this point, you have two options as I see it:
Downgrade from the Office 2010 Technical Preview to a compatible version of Microsoft Office.
Don't sync with Microsoft Outlook until a compatibleupgrade of Desktop Manager is released.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

ERPsim Academic Version 2009-2010 : Video preview

Similar Messages

Maybe you are looking for