Err 30 on 5d mk II
I have canon 5d Mk II ...and suddenly appears Err 30 on display......anybody can help w' this problem, thx
Canon says this is caused by a "shutter malfunction":
Err 30
A shutter malfunction has been detected.
-Turn the power switch to <ON> to turn on the power again.
-Remove and re-install the battery.
-Use a Canon lens.
-If the instructions above do not solve the problem, please contact your nearest Canon Service Center. (*1)
(*1) Please refer the NOTE below.
Note:
If the same error keeps appearing, there may be a problem that requires service. Please arrange a repair clicking on the following link: Request a Repair.
from:
http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secu...
Err 30: Shutter malfunction
Unlike Error 20, this one does point to some sort of problem with the shutter… it could be either a mechanical problem, or some sort of electronic communication error.
from: http://www.learn.usa.canon.com/resources/articles/2012/eos_error_msgs.shtml
Similar Messages
-
(err= -3253) connection with the server was reset. (Windows XP)
I purchased a full album and am having trouble downloading three songs off this album from the iTunes store for Windows XP. The album is Draconian - Turning Season Within. Three of the nine songs off this album will not complete the downloads. It will get almost completely finished, for example: 11.1 MB of 11.3 MB, then it will start downloading the song again from the beginning before
reading: stopped (err= -3253). Then a dialog box pops up saying "connection with the server was reset. I wrote an email to support and tried all the suggested fixes, with no desireable results, including making sure my firewall allows access to iTunes and the iTunes store, changing the startup procedure in "msconfig", and running diagnostics on iTunes to check for connectivity, whick it says I have full connectivity to the internet. This is probably my last hope, that someone else has encountered the (err= -3253) message and can help me with it. This is also the third album I've purchased from the iTunes store and the first time I've had any kind of error message. Please help!Seems to be a scam/rogue software.
http://site-press.com/antivirus/antivirus-news/the-shield-deluxe-how-to-remove-the-shield-deluxe-pop...
http://www.remove-malware.com/forums/viewtopic.php?f=47&t=4288
http://www.microsoft.com/security/antivirus/rogue.aspx
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
Problem Importing Sample Application - Err 7621
Hi,
Experiencing a problem exporting/importing the sample application into the same workspace. This is a new workspace we've created, the second one in the same DB.
Export:
Application: Sample Application
File Format: UNIX
Build Status: Run and Build Application
Import:
File Type: Application/Page Export
File Character Set: Unicode UTF-8
Error:
ERR-7621 Could not determine workspace for application (:) on application accept.
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Env:
User: GREGRO
Workspace LPM_CUSTOM>About
HTML DB
Product Build: 1.6.0.00.87
Schema Compatibility: 2004.07.04
Last DDL Time: 02/21/2005 11:17:04 AM
Host Schema: GREGRO
Application Owner: FLOWS_010600
Workspace ID: 874618965604689
Workspace Name: LPM_CUSTOM
Current User: GREGRO
Language Preference: en
Current Time (on server): 05/13/2005 11:15:18 AM
Database version
Database Banner
Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
PL/SQL Release 9.2.0.5.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.5.0 - Production
NLSRTL Version 9.2.0.5.0 - Production
NLS_CHARACTERSET US7ASCII
DAD CHARACTERSET US-ASCII
Any insight to the problem would be appreciated
Cheers GregHi Scott,
Here is the last few lines of the log.
Fri May 13 09:22:11 2005] [error] [client 130.194.145.15] [ecid: 1115940131:130.194.82.14
5:6163:0:22,0] mod_plsql: /pls/CDUT/htmldb/wwv_flow.accept HTTP-404 ORA-00942: table or vi
ew does not exist
[Fri May 13 09:23:04 2005] [error] [client 130.194.145.15] [ecid: 1115940184:130.194.82.14
5:10341:0:578,0] mod_plsql: /pls/CDUT/htmldb/wwv_flow.accept HTTP-404 ORA-00942: table or
view does not exist
[Fri May 13 09:33:37 2005] [error] [client 130.194.146.86] [ecid: 1115940817:130.194.82.14
5:10341:0:596,0] mod_plsql: /pls/CDUT/htmldb/htmldb HTTP-401 ORA-1017
[Fri May 13 09:48:19 2005] [error] [client 130.194.144.30] [ecid: 1115941699:130.194.82.14
5:10341:0:611,0] mod_plsql: /pls/CDUT/htmldb/htmldb HTTP-401 ORA-1017
[Fri May 13 09:51:14 2005] [error] [client 130.194.144.30] [ecid: 1115941874:130.194.82.14
5:10355:0:612,0] File does not exist: /u10/CDUT/htmldb/doc/favicon.ico
[Fri May 13 10:00:02 2005] [error] [client 130.194.144.30] [ecid: 1115942402:130.194.82.14
5:10340:0:633,0] mod_plsql: /pls/CDUT/htmldb/f HTTP-401 ORA-1017
[Fri May 13 10:00:12 2005] [error] [client 130.194.144.30] [ecid: 1115942412:130.194.82.14
5:10342:0:633,0] mod_plsql: /pls/CDUT/htmldb/f HTTP-401 ORA-1017
[Fri May 13 10:01:17 2005] [error] [client 130.194.147.207] [ecid: 1115942471:130.194.82.1
45:10340:0:644,0] mod_plsql: /pls/CDUT/htmldb/wwv_flow.accept HTTP-404 ORA-00942: table or
view does not exist
Tried the different char sets to no avail.
If we run the import script from TOAD directly it works ok.
Cheers Greg -
==============>deploy log information:
2015-04-27_14-50-42:INFO:Install Args AGENT_PORT=3872
2015-04-27_14-50-42:INFO:Action description 在主机 expquery03 上执行命令 /bin/sh -c '/u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872'
2015-04-27_14-50-42:INFO:Attempt :1 pty required false with no inputs
2015-04-27_15-11-47:INFO:/bin/sh -c '/u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872' execution failed on host expquery03
2015-04-27_15-11-47:INFO:Pattern ERROR: found in file /opt/app/oem12c/gc_inst/em/EMGC_OMS1/sysman/agentpush/2015-04-27_14-18-30-PM/logs/expquery03/install.log Line ERROR: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO:Error Message found Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO: ACTION 在主机 expquery03 上执行命令 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=false b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872
2015-04-27_15-11-47:INFO: OUT null
2015-04-27_15-11-47:INFO: ERR Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
2015-04-27_15-11-47:INFO: EXIT CODE1
2015-04-27_15-11-47:INFO:InvocationTargetException Exception
2015-04-27_15-11-47:INFO:Printing Exception :java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.executeActions(BaseDeployerOps.java:1924)
at oracle.sysman.core.agentpush.ui.deployer.NewAgentDeployer.deploy(NewAgentDeployer.java:59)
at oracle.sysman.core.agentpush.ui.deployfwk.DeploymentWorker.run(DeploymentWorker.java:26)
at oracle.sysman.util.threadPoolManager.WorkerThread.run(Worker.java:311)
Caused by: CommandException: err: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install. out: null exitcode: 1
stacktrace:
null
at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1204)
at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCommandOnNodeInteractive(DeployerOps.java:1050)
at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:644)
at oracle.sysman.core.agentpush.ui.deployer.DeployerOps.executeCmdOnNode(DeployerOps.java:593)
at oracle.sysman.core.agentpush.ui.deployer.BaseDeployerOps.doInstall(BaseDeployerOps.java:484)
oem@oragc12c bin]$ more /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log
/u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log: No such file or directory
[oem@oragc12c bin]$ more /opt/app/oem12c/gc_inst/em/EMGC_OMS1/sysman/agentpush/2015-04-27_14-18-30-PM/logs/expquery03/install.log
-e Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /u01/app/agent_12c/core/12.1.0.4.0/jdk/bin/java -classpath /u01/app/agent_12c/core/12.1.0.4.0/jlib/agentInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/OraInstaller.jar oracle.s
ysman.agent.installer.AgentInstaller /u01/app/agent_12c/core/12.1.0.4.0 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM /u01/app/agent_12c -prereq
Validating oms host & port with url: http://oragc12c.yto.net.cn:4903/empbs/genwallet
Validating oms host & port with url: https://oragc12c.yto.net.cn:4903/empbs/genwalletReturn status:3-oms https port is passedUnzipping the agentcoreimage.zip to /u01/app/agent_12c ....12.1.0.4.0_PluginsOneof
fs_197.zip
Executing command : /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/unzip -o /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM/12.1.0.4.0_PluginsOneoffs_197.zip -d /u01/app/agent_12cExecuting command : /u01/
app/agent_12c/core/12.1.0.4.0/jdk/bin/java -d64 -classpath /u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/OraInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/xmlparserv2.jar:/u01/app/agent_12c/core/12
.1.0.4.0/oui/jlib/srvm.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/emCfg.jar:/u01/app/agent_12c/core/12.1.0.4.0/jlib/agentInstaller.jar:/u01/app/agent_12c/core/12.1.0.4.0/oui/jlib/share.jar oracle.sysman
.agent.installer.AgentInstaller /u01/app/agent_12c/core/12.1.0.4.0 /u01/app/agent_12c/ADATMP_2015-04-27_14-18-30-PM /u01/app/agent_12c /u01/app/agent_12c/agent_inst AGENT_BASE_DIR=/u01/app/agent_12c
Failed to read the inventory
Failed to read the inventory=====================>but the inventory no problem
Cloning the agent home...
Executing command: /u01/app/agent_12c/core/12.1.0.4.0/oui/bin/runInstaller -debug -ignoreSysPrereqs -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/u01/app/agent_12c/core/12.1.0.4.0 AG
ENT_BASE_DIR=/u01/app/agent_12c ORACLE_HOSTNAME=expquery03 AGENT_BASE_DIR=/u01/app/agent_12c OMS_HOST=oragc12c.yto.net.cn EM_UPLOAD_PORT=4903 AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst b_doDiscovery=f
alse b_startAgent=false b_forceInstCheck=true AGENT_PORT=3872 -noconfig ORACLE_HOME_NAME=agent12c1 -force b_noUpgrade=true
ERROR: Agent Clone Failed SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
Agent Deploy Log Location:/u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_15-10-25-PM.log
============>agent client privage and "/tmp" information at hp-unix
$ bdf
Filesystem kbytes used avail %used Mounted on
/dev/vg00/lvol3 5242880 384784 4820160 7% /
/dev/vg00/lvol1 1835008 376272 1447400 21% /stand
/dev/vg00/lvol7 20971520 8977200 11902024 43% /var
/dev/vg00/lvol9 7864320 3213136 4614904 41% /usr
/dev/vg00/lvol6 85983232 63055260 21527575 75% /u01
/dev/vg00/lvol5 10485760 2268216 8153768 22% /tmp===============>
/dev/vg00/lvol8 10354688 6536024 3788952 63% /opt
/dev/vg00/lvol4 52428800 13319488 38803816 26% /home
$ ls -lt
total 6
drwxr-xr-x 2 oem oinstall 1024 Apr 27 15:14 agent_12c
drwxrwx--- 5 grid oinstall 1024 Apr 27 15:11 oraInventory
drwxr-xr-x 3 oem oinstall 96 Apr 22 16:16 agent
drwxrwxr-x 8 grid oinstall 1024 Apr 21 14:58 grid
drwxrwxr-x 6 grid oinstall 96 Aug 7 2013 oracle
drwxr-xr-x 3 root oinstall 96 Aug 2 2013 11.2.0
$ cd oraInventory
$ ls -lt
total 44
drwxrwx--- 2 grid oinstall 16384 Apr 27 15:10 logs
drwxrwx--- 3 grid oinstall 2048 Apr 22 10:36 backup
drwxrwx--- 2 grid oinstall 1024 Apr 3 2014 ContentsXML
-rwxrwx--- 1 grid oinstall 1686 Aug 6 2013 orainstRoot.sh
-rw-rw---- 1 grid oinstall 56 Aug 6 2013 oraInst.loc
$ cd ContentsXML
$ ls
comps.xml inventory.xml libs.xml
$ ls -lt
total 6
-rw-rw---- 1 grid oinstall 842 Apr 21 10:31 inventory.xml
-rw-rw---- 1 grid oinstall 329 Apr 20 17:32 comps.xml
-rw-rw---- 1 grid oinstall 292 Apr 20 17:32 libs.xml
I view some oms document ,don't know the caseagent client's apeloy log:
$ more /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy/agentDeploy_2015-04-27_16-22-23-PM.log
INFO: /u01/app/agent_12c/core/12.1.0.4.0
INFO: /u01/app/agent_12c/ADATMP_2015-04-27_15-33-29-PM
INFO: /u01/app/agent_12c
INFO: /u01/app/agent_12c/agent_inst
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: -ignorePrereqs
INFO: ORACLE_HOSTNAME=expquery03
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: OMS_HOST=oragc12c.yto.net.cn
INFO: EM_UPLOAD_PORT=4903
INFO: AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst
INFO: b_doDiscovery=false
INFO: b_startAgent=false
INFO: b_forceInstCheck=true
INFO: AGENT_PORT=3872
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: ORACLE_HOSTNAME=expquery03
INFO: AGENT_BASE_DIR=/u01/app/agent_12c
INFO: OMS_HOST=oragc12c.yto.net.cn
INFO: EM_UPLOAD_PORT=4903
INFO: AGENT_INSTANCE_HOME=/u01/app/agent_12c/agent_inst
INFO: b_doDiscovery=false
INFO: b_startAgent=false
INFO: b_forceInstCheck=true
INFO: AGENT_PORT=3872
INFO: Setting the system property ORACLE_HOSTNAME to:expquery03
INFO: Setting the system property oracle.installer.oui_loc to:/u01/app/agent_12c/core/12.1.0.4.0/oui
INFO: Agent Base Directory is : /u01/app/agent_12c
INFO: Agent Home is : /u01/app/agent_12c/core/12.1.0.4.0
INFO: Sbin Home is : /u01/app/agent_12c/sbin
INFO: Logs Location is : /u01/app/agent_12c/core/12.1.0.4.0/cfgtoollogs/agentDeploy
SEVERE: User has specified -ignorePrereqs when invoking the installer. All pre-requisite checks will be ignored for this installation session. Configuration failures may result if proper pre-requisites are
not satisfied.
INFO:
Setting system property CUSTOM_INVENTORY to /u01/app/oraInventory
INFO: Clone start time:2015-04-27_16-22-24-PM
INFO: Executing command: /u01/app/agent_12c/core/12.1.0.4.0/oui/bin/runInstaller -debug -ignoreSysPrereqs -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/u01/app/agent_12c/core/12.1.0.4.
0 -noconfig ORACLE_HOME_NAME=agent12c1 -force
INFO: Starting Oracle Universal Installer...
INFO:
INFO: Checking swap space: must be greater than 500 MB. Actual 61440 MB Passed
INFO: Preparing to launch Oracle Universal Installer from /tmp/OraInstall2015-04-27_04-22-24PM. Please wait ...Oracle Universal Installer, Version 11.1.0.12.0 Production
INFO: Copyright (C) 1999, 2014, Oracle. All rights reserved.
INFO:
INFO: org.xml.sax.SAXParseException: <Line 1, Column 38>: XML-20100: (Fatal Error) Expected '?>'.
INFO: at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
INFO: at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
INFO: at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:345)
INFO: at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:307)
INFO: at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:212)
INFO: at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:150)
INFO: at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:88)
INFO: at oracle.sysman.oii.oiii.OiiiInstallInventory.readHomes(OiiiInstallInventory.java:708)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadPartialInstallInv(OiiiInstallAreaControl.java:766)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initInstallInv(OiiiInstallAreaControl.java:811)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadInstallInventory(OiiiInstallAreaControl.java:582)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1965)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1929)
INFO: at oracle.sysman.oii.oiic.OiicCloneSession.setAreaControls(OiicCloneSession.java:1309)
INFO: at oracle.sysman.oii.oiic.OiicCloneSession.<init>(OiicCloneSession.java:932)
INFO: at oracle.sysman.oii.oiic.OiicSessionWrapper.createNewSession(OiicSessionWrapper.java:878)
INFO: at oracle.sysman.oii.oiic.OiicSessionWrapper.<init>(OiicSessionWrapper.java:189)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.init(OiicInstaller.java:511)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:967)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
INFO: org.xml.sax.SAXParseException: <Line 1, Column 38>: XML-20100: (Fatal Error) Expected '?>'.
INFO: at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
INFO: at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
INFO: at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:345)
INFO: at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:307)
INFO: at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:212)
INFO: at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:150)
INFO: at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readHomes(OiiiInstallXMLReader.java:88)
INFO: at oracle.sysman.oii.oiii.OiiiInstallInventory.readHomes(OiiiInstallInventory.java:708)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadPartialInstallInv(OiiiInstallAreaControl.java:766)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initInstallInv(OiiiInstallAreaControl.java:811)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.loadInstallInventory(OiiiInstallAreaControl.java:582)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1965)
INFO: at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1929)
INFO: at oracle.sysman.oii.oiic.OiicCloneSession.setAreaControls(OiicCloneSession.java:1309)
INFO: at oracle.sysman.oii.oiic.OiicCloneSession.<init>(OiicCloneSession.java:932)
INFO: at oracle.sysman.oii.oiic.OiicSessionWrapper.createNewSession(OiicSessionWrapper.java:878)
INFO: at oracle.sysman.oii.oiic.OiicSessionWrapper.<init>(OiicSessionWrapper.java:189)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.init(OiicInstaller.java:511)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:967)
INFO: at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:905)
INFO: OUI-10053:Unable to generate temporary script: /tmp/orainstRoot.sh. Unable to continue install.
INFO: SEVERE:OUI-10053:Unable to generate temporary script: {0}. Unable to continue install.
INFO: Plugin homes:
INFO:
INFO: LD_LIBRARY_PATH environment variable :
INFO: -------------------------------------------------------
INFO: Total args: 42
INFO: Command line argument array elements ...
INFO: Arg:0:/tmp/OraInstall2015-04-27_04-22-24PM/jre/bin/java:
INFO: Arg:1:-Doracle.installer.library_loc=/tmp/OraInstall2015-04-27_04-22-24PM/oui/lib/hpia64:
INFO: Arg:2:-Doracle.installer.oui_loc=/tmp/OraInstall2015-04-27_04-22-24PM/oui:
INFO: Arg:3:-Doracle.installer.bootstrap=TRUE:
INFO: Arg:4:-Doracle.installer.startup_location=/u01/app/agent_12c/core/12.1.0.4.0/oui/bin:
INFO: Arg:5:-Doracle.installer.jre_loc=../../jre:
INFO: Arg:6:-Doracle.installer.nlsEnabled="TRUE":
INFO: Arg:7:-Doracle.installer.prereqConfigLoc= :
INFO: Arg:8:-Doracle.installer.unixVersion=B.11.31:
INFO: Arg:9:-d64:
INFO: Arg:10:-mx96m: -
i have a song that wont download that i just bought from the itunes store and it says that it is corrupted and that there is an error that is err=100000
I just posted a possible solution here - https://discussions.apple.com/message/17908124#17908124
-
Unable to open RFC connection - Err message
I all
I am trying to install SAP ERP 2004 SR1 on Microsoft Windows Server 2003, SQL Server 2000. I have successfully installed the Central Instance but when I try to install the Database instance after the database loading the following error is given:
FRF00007 - Unable to open RFC connection.
I have also tried to start the sap system. The message_server and igswd processed run ok, but the disp+work process is stopped.
I am also sending you the developer trace for this process.
Thank you a lot
Vasil
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 27 11:24:48 2009
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, Unicode
pid 2668
***LOG Q00=> DpSapEnvInit, DPStart (01 2668) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Mon Jul 27 11:24:53 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 058C0040, size: 3192688)
DpShMCreate: allocated sys_adm at 058C0040
DpShMCreate: allocated wp_adm at 058C1B58
DpShMCreate: allocated tm_adm_list at 058C4478
DpShMCreate: allocated tm_adm at 058C44A0
DpShMCreate: allocated wp_ca_adm at 05B6B0E8
DpShMCreate: allocated appc_ca_adm at 05B70EA8
DpShMCreate: allocated comm_adm_list at 05B72DE8
DpShMCreate: allocated comm_adm at 05B72E00
DpShMCreate: allocated vmc_adm_list at 05BB9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05BB9AF8
DpShMCreate: allocated wall_adm at 05BB9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1131 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
***LOG Q0K=> DpMsAttach, mscon ( upayweb1) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Jul 27 11:24:54 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Jul 27 11:25:33 2009
ERROR => W0 (pid 3740) died [dpxxdisp.c 12187]
ERROR => W1 (pid 3748) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3756) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3764) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3772) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3780) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3792) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3800) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3740 (SIGUSR2)
ERROR => DpWpKill(3740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3748 (SIGUSR2)
ERROR => DpWpKill(3748, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3756 (SIGUSR2)
ERROR => DpWpKill(3756, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3764 (SIGUSR2)
ERROR => DpWpKill(3764, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3772 (SIGUSR2)
ERROR => DpWpKill(3772, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3780 (SIGUSR2)
ERROR => DpWpKill(3780, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3792 (SIGUSR2)
ERROR => DpWpKill(3792, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-3800 (SIGUSR2)
ERROR => DpWpKill(3800, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:43 2009
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 27 09:25:43 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3740 Ended no 1 0 0
1 DIA 3748 Ended no 1 0 0
2 UPD 3756 Ended no 1 0 0
3 ENQ 3764 Ended no 1 0 0
4 BTC 3772 Ended no 1 0 0
5 BTC 3780 Ended no 1 0 0
6 SPO 3792 Ended no 1 0 0
7 UP2 3800 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 27 09:25:43 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Mon Jul 27 09:25:43 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 27 09:25:43 2009
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:48 2009
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3724) (SOFT_KILL)
Stop icman
killing process (3732) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3724 HANDLE:1592)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1625
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 27 11:25:49 2009
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3724 HANDLE:1592)
[DpProcDied] Process died (PID:3732 HANDLE:1584)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'upayweb1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1596
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2668) [dpxxdisp.c 8495]
Good Bye .....Hi Juan <br>
I am sending you the log from dev_w0 <br>
<br>
Thank you a lot,<br>
Vasil
<br> <br>
<br>
<br>
trc file: "dev_w0", trc level: 1, release: "640"<br>
<br>
*<br>
ACTIVE TRACE LEVEL 1<br>
ACTIVE TRACE COMPONENTS all, M<br>
*<br>
B <br>
B Mon Jul 27 11:24:53 2009<br>
B create_con (con_name=R/3)<br>
B Loading DB library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' ...<br>
B Library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' loaded<br>
B Version of 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43)<br>
B New connection 0 created<br>
M systemid 560 (PC with Windows NT)<br>
M relno 6400<br>
M patchlevel 0<br>
M patchno 43<br>
M intno 20020600<br>
M make: multithreaded, Unicode<br>
M pid 3740<br>
M <br>
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3740) [dpxxdisp.c 1160]<br>
I MtxInit: -2 0 0<br>
M DpSysAdmExtCreate: ABAP is active<br>
M DpSysAdmExtCreate: JAVA is not active<br>
M DpShMCreate: sizeof(wp_adm) 10528 (1316)<br>
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)<br>
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)<br>
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)<br>
M DpShMCreate: sizeof(comm_adm) 290000 (580)<br>
M DpShMCreate: sizeof(vmc_adm) 0 (372)<br>
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)<br>
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060C0040, size: 3192688)<br>
M DpShMCreate: allocated sys_adm at 060C0040<br>
M DpShMCreate: allocated wp_adm at 060C1B58<br>
M DpShMCreate: allocated tm_adm_list at 060C4478<br>
M DpShMCreate: allocated tm_adm at 060C44A0<br>
M DpShMCreate: allocated wp_ca_adm at 0636B0E8<br>
M DpShMCreate: allocated appc_ca_adm at 06370EA8<br>
M DpShMCreate: allocated comm_adm_list at 06372DE8<br>
M DpShMCreate: allocated comm_adm at 06372E00<br>
M DpShMCreate: allocated vmc_adm_list at 063B9AD0<br>
M DpShMCreate: system runs without vmc_adm<br>
M DpShMCreate: allocated ca_info at 063B9AF8<br>
M DpShMCreate: allocated wall_adm at 063B9B00<br>
X <br>
X Mon Jul 27 11:24:54 2009<br>
X EmInit: MmSetImplementation( 2 ).<br>
X <ES> client 0 initializing ....<br>
X Using implementation flat<br>
M <EsNT> Memory Reset disabled as NT default<br>
X ES initialized.<br>
M <br>
M Mon Jul 27 11:24:55 2009<br>
M calling db_connect ...<br>
C Thank You for using the SLOLEDB-interface<br>
C Using dynamic link library 'C:\usr\sap\UFT\SYS\exe\run\dbmssslib.dll'<br>
C dbmssslib.dll patch info<br>
C patchlevel 0<br>
C patchno 43<br>
C patchcomment View with literal containing (0x60) (786638)<br>
C np:(local) connection used on UPAYWEB1<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
C Provider Release:9.00.1399.06<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes<br>
C Using shared procedure name cache UPAYWEB1_UFTUFT_UFT_MEM initialized by another process.<br>
C Connected to db server : [UPAYWEB1] server_used : [np:(local)], dbname: UFT, dbuser: uft<br>
C pn_id:UPAYWEB1_UFTUFT_UFT<br>
C Not using MARS (on sql 8.0)<br>
B Connection 0 opened<br>
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost <br>
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090727 112454 UPAYWEB1 <br>
C The IRow interface is supported by this OLEDB provider<br>
M db_connect o.k.<br>
I MtxInit: 0 0 0<br>
M SHM_PRES_BUF (addr: 0AD60040, size: 4400000)<br>
M SHM_ROLL_AREA (addr: 5EF60040, size: 160563200)<br>
M SHM_PAGING_AREA (addr: 0B1A0040, size: 72417280)<br>
M SHM_ROLL_ADM (addr: 0F6C0040, size: 1603610)<br>
M SHM_PAGING_ADM (addr: 0F850040, size: 525344)<br>
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F8E0040<br>
M ThCreateNoBuffer index size: 3000 elems<br>
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0F970040<br>
X EmInit: MmSetImplementation( 2 ).<br>
X <ES> client 0 initializing ....<br>
X Using implementation flat<br>
X ES initialized.<br>
C <br>
C Mon Jul 27 11:24:58 2009<br>
C The IRow interface is supported by this OLEDB provider<br>
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8<br>
C Using Provider SQLNCLI<br>
C OpenOledbConnection: MARS property was set successfully.<br>
B dbtbxbuf: Buffer TABL (addr: 146900C8, size: 30000000, end: 1632C448)<br>
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1<br>
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5<br>
B dbtbxbuf: protect_shm = 0, force_checks = 0<br>
B dbtbxbuf: tsize_retry = 14304000<br>
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]<br>
B dbtbxbuf: Buffer TABLP (addr: 163300C8, size: 10240000, end: 16CF40C8)<br>
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1<br>
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5<br>
B dbtbxbuf: protect_shm = 0, force_checks = 0<br>
B dbtbxbuf: tsize_retry = 5047296<br>
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]<br>
B dbtbxbuf: Reading TBX statistics:<br>
B dbtbxbuf: Opening C:\usr\sap\UFT\DVEBMGS01\data\tbxnew failed (No such file or directory).<br>
B dbtbxbuf: Renaming C:\usr\sap\UFT\DVEBMGS01\data\tbxnew to C:\usr\sap\UFT\DVEBMGS01\data\tbxstat failed (No such file or directory).<br>
B dbtbxbuf: 0 object entries precreated<br>
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.<br>
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455]<br>
C sloledb.cpp [ParamStmtExec,line 11888]: Error/Message: (err 208, sev 16), Invalid object name 'DDLOG'.<br>
C Procname: [##Y3UPAYWEB1uft00000037400000000002112455]<br>
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT MAX(SEQNUMBER) AS c FROM DDLOG ]<br>
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112017<br>
C DbSlRead - Error 103 (dbcode 208) on open<br>
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455><br>
C DbSlRead - Error 103 (dbcode 208) on fetch<br>
C DbSlRead - <##Y3UPAYWEB1uft00000037400000000002112455><br>
B ***LOG BZY=> unexpected return code 103 calling SEL [dbsynseq#1 @ 255] [dbsynseq0255 ]<br>
B db_syinit failed<br>
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 252]<br>
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 1901]<br>
M ***LOG R19=> tskh_init, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1359]<br>
M in_ThErrHandle: 1<br>
M *** ERROR => tskh_init: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 9413]<br>
M <br>
M Info for wp 0<br>
M <br>
M stat = 4<br>
M reqtype = 1<br>
M act_reqtype = -1<br>
M rq_info = 0<br>
M tid = -1<br>
M mode = 255<br>
M len = -1<br>
M rq_id = 65535<br>
M rq_source = 255<br>
M last_tid = 0<br>
M last_mode = 0<br>
M int_checked_resource(RFC) = 0<br>
M ext_checked_resource(RFC) = 0<br>
M int_checked_resource(HTTP) = 0<br>
M ext_checked_resource(HTTP) = 0<br>
M report = > <<br>
M action = 0<br>
M tab_name = > <<br>
M <br>
M *****************************************************************************<br>
M *<br>
M * LOCATION SAP-Server upayweb1_UFT_01 on host upayweb1 (wp 0)<br>
M * ERROR tskh_init: ThIPCInit<br>
M *<br>
M * TIME Mon Jul 27 11:24:58 2009<br>
M * RELEASE 640<br>
M * COMPONENT Taskhandler<br>
M * VERSION 1<br>
M * RC 17<br>
M * MODULE thxxhead.c<br>
M * LINE 9589<br>
M * COUNTER 1<br>
M *<br>
M *****************************************************************************<br>
M <br>
M PfStatDisconnect: disconnect statistics<br>
M Entering TH_CALLHOOKS<br>
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP<br>
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]<br>
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]<br>
M Entering ThSetStatError<br>
M Entering ThReadDetachMode<br>
M call ThrShutDown (1)...<br>
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3740) [dpnttool.c 357]<br> -
Supplier Merge Fail "Stuck" ERR REP-1401: 'c_update_dup_vendorformula'
My users attempted to merge suppliers and received the error copied below and now all other users (include me (admin)) have the attempted suppliers "stuck" in the supplier merge screen when we open it.
Payables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXINUPD module: Supplier Merge Program
Current system time is 07-AUG-2012 15:19:06
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_LAST_UPDATED_BY="2077"
P_SET_OF_BOOKS_ID="1"
P_FA_INSTALLED_FLAG="N"
P_PO_INSTALLED_FLAG="Y"
P_PA_INSTALLED_FLAG="N"
P_INV_INSTALLED_FLAG="N"
P_PN_INSTALLED_FLAG="N"
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.WE8ISO8859P1
LOG :
Report: d:\Applfmsp\fmspappl\ap\11.5.0\reports\US\APXINUPD.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
MSG MSG-00001: After SRWINIT
MSG MSG-00002: After Get_Company_Name
MSG MSG-00003: After Get_NLS_Strings
MSG MSG-00004: After Get_Base_Curr_Data
MSG MSG-00007: After Custom_Init
MSG MSG-01000: Checking for duplicate tax sites...
MSG MSG-01001: Selecting duplicate vendor sites...
MSG MSG-01002: Modifying recurring payments...
MSG MSG-01004: Selecting duplicate vendors (INV)...
MSG MSG-00100: Updating Invoice id :275274
MSG MSG-00200: Updating ap_invoices.......
MSG MSG-00300: Updating ap_checks......
MSG MSG-00100: Updating Invoice id :276655
MSG MSG-00200: Updating ap_invoices.......
MSG MSG-00300: Updating ap_checks......
MSG MSG-00100: Updating Invoice id :277026
MSG MSG-00200: Updating ap_invoices.......
MSG MSG-00300: Updating ap_checks......
MSG MSG-00100: Updating Invoice id :277027
MSG MSG-00200: Updating ap_invoices.......
MSG MSG-00300: Updating ap_checks......
MSG MSG-01003: Updating Vendor...
ERR REP-1401: 'c_update_dup_vendorformula': Fatal PL/SQL error occurred.
ORA-01422: exact fetch returns more than requested number of rows
MSG MSG-00020: After SRWEXIT
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system.
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2163883.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 07-AUG-2012 15:19:21
---------------------------------------------------------------------------Hi;
Similar issue mention for R12. Please see: R12: Supplier Merge Error ORA-00001: unique constraint (AP.AP_HISTORY_INVOICES_U2) violated [ID 843379.1]
If its similar issue like yours you need to rise Sr
Regard
Helios -
BUG: ERR-1777 from Interactive Report on Webkit browsers
Using the [My Orders interactive report on page 1 of the Sample Application|http://apex.oracle.com/pls/otn/f?p=60385:1], entering a search term in the default search field and pressing return results in
>
ERR-1777: Page 1 provided no page to branch to. Please report this error to your application administrator.
>
in the following Webkit-based browsers:
Mac OS X 10.5.6
Safari 3.2.1
Mac OS X 10.5.7
Safari 4.0.2
Safari 4.0.3
Windows XP SP3
Safari 4 public beta (528.16)
Google Chrome 2.0.172.39Hi,
I'm terribly sorry.
I was hurry, when posting
Here is link I forgot attach
ERR-1777 in Interactive Report on Mac Safari 4
Br, Jari -
Doing a fresh stock Windows 7 x64 SP1 deployment with MDT2010, the Windows Update Pre Application Installation step sometimes fails with error -2145107934 0x80244022.
The MDT DeploymentShare is on a Lenovo T440s (Core i7, 8GB, 256GB SSD) and I'm imaging two VirtualBox VM's (1 core & 1GB RAM) on the T440s.
For Both: I have not customized the WIM - its straight from the ISO from MSDN.
For Both: This is a stock Task Sequence.
For Both: I have not made any post-OS installation customizations.
For Both: I'm not joined to a domain.
For Both: I'm not pointing to a WSUS server.
For Machine 1: I'm not installing any applications.
For Machine 2: I'm installing Office 2010 Pro Plus via Applications001 in CustomSettings.ini.
Machine 1 failed during the "Windows Update (Pre-Application Installation)" task sequence step. (Logs below)
Machine 2 is still running, the "Windows Update (Pre-Application Installation)" task sequence step and seems to be working from what I can tell.
ZTIWindowsUpdate log from Machine 1:
Microsoft Deployment Toolkit version: 5.1.1642.01 ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
The task sequencer log is located at C:\Users\ADMINI~1\AppData\Local\Temp\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Write all logging text to \\MDTSERVER.f.q.d.n\DeploymentShare$\Logs\VMAF7BF583 ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Validating connection to \\MDTSERVER.f.q.d.n\DeploymentShare$\Logs\VMAF7BF583 ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Already connected to server MDTSERVER.f.q.d.n as that is where this script is running from. ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Begin Windows Update. Reboot=[] Retry=[] Count = 0 ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Property MSIT_WU_Count is now = 1 ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Configuring Windows Update settings (manual update, use server) ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Archive NoAUtoUpdate State: Was [<empty>]. ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Property NoAutoUpdate_Previous is now = <empty> ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Windows Update Agent verion 6 found, OK to continue ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Ready to Opt-In to Microsoft Update: WUA Version: 7.5.7601.17514 ZTIWindowsUpdate 9/5/2014 10:19:15 AM 0 (0x0000)
Microsoft Update Service: Enabled = False ZTIWindowsUpdate 9/5/2014 10:19:25 AM 0 (0x0000)
FindFile: The file muauth.cab could not be found in any standard locations. ZTIWindowsUpdate 9/5/2014 10:19:25 AM 0 (0x0000)
about to begin add service [] ZTIWindowsUpdate 9/5/2014 10:19:25 AM 0 (0x0000)
Status: 3 ZTIWindowsUpdate 9/5/2014 10:20:10 AM 0 (0x0000)
Command Line Procesed Query=False Registered=False UpdateCommand=[IsInstalled = 0 and IsHidden = 0] ZTIWindowsUpdate 9/5/2014 10:20:10 AM 0 (0x0000)
Start Search... ZTIWindowsUpdate 9/5/2014 10:20:10 AM 0 (0x0000)
FAILURE (Err): -2145107934 0x80244022: Windows Update, search for updates. - ZTIWindowsUpdate 9/5/2014 10:22:09 AM 0 (0x0000)
Restore NoAutoUpdateKey to <empty>. ZTIWindowsUpdate 9/5/2014 10:22:09 AM 0 (0x0000)
ZTI ERROR - Non-zero return code by ZTIWindowsUpdate, rc = 1 ZTIWindowsUpdate 9/5/2014 10:22:09 AM 0 (0x0000)
Windows Update log from Machine 1:
2014-09-05 10:18:40:936 948 368 Misc =========== Logging initialized (build: 7.5.7601.17514, tz: -0400) ===========
2014-09-05 10:18:40:936 948 368 Misc = Process: C:\Windows\system32\svchost.exe
2014-09-05 10:18:40:936 948 368 Misc = Module: c:\windows\system32\wuaueng.dll
2014-09-05 10:18:40:936 948 368 Service *************
2014-09-05 10:18:40:936 948 368 Service ** START ** Service: Service startup
2014-09-05 10:18:40:936 948 368 Service *********
2014-09-05 10:18:40:936 948 368 Agent * WU client version 7.5.7601.17514
2014-09-05 10:18:40:952 948 368 Agent * Base directory: C:\Windows\SoftwareDistribution
2014-09-05 10:18:40:952 948 368 Agent * Access type: No proxy
2014-09-05 10:18:40:952 948 368 Agent * Network state: Connected
2014-09-05 10:18:41:296 948 368 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2014-09-05 10:18:41:343 948 368 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-09-05 10:18:41:343 948 368 Agent WARNING: Failed to read the service id for re-registration 0x80070002
2014-09-05 10:18:41:343 948 368 Agent WARNING: Missing service entry in the backup data store; cleaning up
2014-09-05 10:18:41:405 948 3c0 Report CWERReporter::Init succeeded
2014-09-05 10:18:41:405 948 3c0 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-09-05 10:18:41:405 948 3c0 Agent *********** Agent: Initializing global settings cache ***********
2014-09-05 10:18:41:405 948 3c0 Agent * WSUS server: <NULL>
2014-09-05 10:18:41:405 948 3c0 Agent * WSUS status server: <NULL>
2014-09-05 10:18:41:405 948 3c0 Agent * Target group: (Unassigned Computers)
2014-09-05 10:18:41:405 948 3c0 Agent * Windows Update access disabled: No
2014-09-05 10:18:41:405 948 368 Agent Created new random SusClientId db66d74b-a895-4f38-bd12-586e27811b39. Old Id: none.
2014-09-05 10:18:41:405 948 368 Report *********** Report: Initializing static reporting data ***********
2014-09-05 10:18:41:405 948 368 Report * OS Version = 6.1.7601.1.0.65792
2014-09-05 10:18:41:405 948 368 Report * OS Product Type = 0x00000004
2014-09-05 10:18:41:436 948 3c0 DnldMgr Download manager restoring 0 downloads
2014-09-05 10:18:41:436 948 3c0 AU ########### AU: Initializing Automatic Updates ###########
2014-09-05 10:18:41:436 948 3c0 AU AU setting next sqm report timeout to 2014-09-05 14:18:41
2014-09-05 10:18:41:436 948 3c0 AU AU setting next featured software notification timeout to 2014-09-05 14:18:41
2014-09-05 10:18:41:436 948 3c0 AU AU featured software notification sequence number is 1507, Generation Time:2014-09-05 14:18:41
2014-09-05 10:18:41:436 948 3c0 AU # AU is not configured yet
2014-09-05 10:18:41:436 948 3c0 AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-09-05 10:18:41:436 948 3c0 AU # Accelerated install is required
2014-09-05 10:18:41:436 948 3c0 Agent Switching to hardware-verified ClientId.
2014-09-05 10:18:41:436 948 3c0 AU AU is not configured yet, generating timeout to launch setup wizard
2014-09-05 10:18:41:436 948 3c0 AU Initializing featured updates
2014-09-05 10:18:41:436 948 3c0 AU Found 0 cached featured updates
2014-09-05 10:18:41:686 948 368 Report * Computer Brand = innotek GmbH
2014-09-05 10:18:41:686 948 368 Report * Computer Model = VirtualBox
2014-09-05 10:18:41:702 948 368 Report * Bios Revision = VirtualBox
2014-09-05 10:18:41:702 948 368 Report * Bios Name = Default System BIOS
2014-09-05 10:18:41:702 948 368 Report * Bios Release Date = 2006-12-01T00:00:00
2014-09-05 10:18:41:702 948 368 Report * Locale ID = 1033
2014-09-05 10:18:41:749 948 3c0 Agent Created new random SusClientId 2f4a5fb1-bc6a-4837-ac1e-554ca80f9369. Old Id: db66d74b-a895-4f38-bd12-586e27811b39.
2014-09-05 10:18:41:749 948 3c0 AU Successfully wrote event for AU health state:0
2014-09-05 10:18:41:749 948 3c0 AU Successfully wrote event for AU health state:0
2014-09-05 10:18:41:749 948 3c0 AU AU finished delayed initialization
2014-09-05 10:18:41:749 948 3c0 AU ########### AU: Setting new AU options ###########
2014-09-05 10:18:41:749 948 3c0 AU Setting AU Approval Type to 4
2014-09-05 10:18:41:749 948 3c0 AU Setting Install Schedule Day to 0
2014-09-05 10:18:41:749 948 3c0 AU Setting Install Schedule Time to 3
2014-09-05 10:18:41:749 948 3c0 AU Successfully wrote event for AU health state:0
2014-09-05 10:18:41:749 948 3c0 AU # Policy changed, AU refresh required = Yes
2014-09-05 10:18:41:749 948 3c0 AU # Approval type: Scheduled (User preference)
2014-09-05 10:18:41:749 948 3c0 AU # Scheduled install day/time: Every day at 3:00
2014-09-05 10:18:41:749 948 3c0 AU # Auto-install minor updates: Yes (User preference)
2014-09-05 10:18:41:749 948 3c0 AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-09-05 10:18:41:749 948 3c0 AU # Accelerated install is required
2014-09-05 10:18:41:749 948 3c0 AU AU Refresh required....
2014-09-05 10:18:41:749 948 3c0 AU AU setting next detection timeout to 2014-09-05 14:18:41
2014-09-05 10:18:41:749 948 3c0 AU AU setting next sqm report timeout to 2014-09-05 14:18:41
2014-09-05 10:18:41:749 948 3c0 AU AU setting next featured software notification timeout to 2014-09-05 14:18:41
2014-09-05 10:18:41:749 948 3c0 AU Successfully wrote event for AU health state:0
2014-09-05 10:18:41:749 948 3c0 AU Triggering Online detection (non-interactive)
2014-09-05 10:18:41:749 948 368 AU #############
2014-09-05 10:18:41:749 948 368 AU ## START ## AU: Search for updates
2014-09-05 10:18:41:749 948 368 AU #########
2014-09-05 10:18:41:764 948 368 AU <<## SUBMITTED ## AU: Search for updates [CallId = {D25F956B-F486-4B14-9F85-E242F2430CBF}]
2014-09-05 10:18:41:764 948 368 AU AU setting next sqm report timeout to 2014-09-06 14:18:41
2014-09-05 10:18:41:764 948 488 Agent *************
2014-09-05 10:18:41:764 948 488 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-05 10:18:41:764 948 488 Agent *********
2014-09-05 10:18:41:764 948 488 Agent * Online = Yes; Ignore download priority = No
2014-09-05 10:18:41:764 948 488 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-09-05 10:18:41:764 948 488 Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
2014-09-05 10:18:41:764 948 488 Agent * Search Scope = {Machine}
2014-09-05 10:18:41:764 948 488 Setup Checking for agent SelfUpdate
2014-09-05 10:18:41:764 948 488 Setup Client version: Core: 7.5.7601.17514 Aux: 7.5.7601.17514
2014-09-05 10:18:48:030 948 368 AU Setting timeout for delay launching accelerated install
2014-09-05 10:18:48:827 948 368 AU Timeout for accelerated install is already set
2014-09-05 10:18:52:593 948 488 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
2014-09-05 10:18:52:608 948 488 Misc Microsoft signed: Yes
2014-09-05 10:18:55:983 948 488 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-09-05 10:18:55:983 948 488 Misc Microsoft signed: Yes
2014-09-05 10:18:58:030 948 368 AU Triggering accelerated install by calling UpdateNow
2014-09-05 10:18:58:030 948 368 AU No installable updates are available
2014-09-05 10:18:59:280 948 488 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2014-09-05 10:18:59:280 948 488 Misc Microsoft signed: Yes
2014-09-05 10:18:59:296 948 488 Setup Determining whether a new setup handler needs to be downloaded
2014-09-05 10:18:59:296 948 488 Setup SelfUpdate handler is not found. It will be downloaded
2014-09-05 10:18:59:296 948 488 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:18:59:389 948 488 Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320" is applicable and needs to be downloaded.
2014-09-05 10:18:59:389 948 488 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:18:59:421 948 488 Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320" is applicable and needs to be downloaded.
2014-09-05 10:18:59:421 948 488 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:18:59:468 948 488 Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320" is applicable and needs to be downloaded.
2014-09-05 10:18:59:468 948 488 Setup SelfUpdate check completed. SelfUpdate is required.
2014-09-05 10:18:59:468 948 488 Setup Downloading binaries required for SelfUpdate
2014-09-05 10:18:59:468 948 488 Setup Downloading SelfUpdate handler WuSetupHandler.cab from http://ds.download.windowsupdate.com/v11/3/windowsupdate/selfupdate/WSUS3/x64/Win7SP1
2014-09-05 10:19:00:468 948 488 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupHandler.cab:
2014-09-05 10:19:00:468 948 488 Misc Microsoft signed: Yes
2014-09-05 10:19:00:483 948 488 Setup Successfully downloaded SelfUpdate handler
2014-09-05 10:19:00:483 948 488 Setup Downloading setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:00:483 948 488 Setup Downloading setup package WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320.cab from http://ds.download.windowsupdate.com/v11/3/windowsupdate/selfupdate/WSUS3/x64/Win7SP1
2014-09-05 10:19:01:514 948 488 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Packages\WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320\WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320.cab:
2014-09-05 10:19:01:530 948 488 Misc Microsoft signed: Yes
2014-09-05 10:19:01:530 948 488 Setup Downloading setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:01:530 948 488 Setup Downloading setup package WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320.cab from http://ds.download.windowsupdate.com/v11/3/windowsupdate/selfupdate/WSUS3/x64/Win7SP1
2014-09-05 10:19:02:952 948 488 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Packages\WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320\WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320.cab:
2014-09-05 10:19:02:999 948 488 Misc Microsoft signed: Yes
2014-09-05 10:19:02:999 948 488 Setup Downloading setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:02:999 948 488 Setup Downloading setup package WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320.cab from http://ds.download.windowsupdate.com/v11/3/windowsupdate/selfupdate/WSUS3/x64/Win7SP1
2014-09-05 10:19:04:754 948 488 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320.cab:
2014-09-05 10:19:04:832 948 488 Misc Microsoft signed: Yes
2014-09-05 10:19:04:832 948 488 Setup Staging setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:06:051 948 488 Setup Successfully staged setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:06:051 948 488 Setup Staging setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:08:347 948 488 Setup Successfully staged setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:08:363 948 488 Setup Staging setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:11:629 948 488 Setup Successfully staged setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:11:801 948 488 Setup Download of SelfUpdate binaries succeeded
2014-09-05 10:19:11:801 948 488 Setup Starting agent SelfUpdate
2014-09-05 10:19:11:816 948 488 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2014-09-05 10:19:11:816 948 488 Misc Microsoft signed: Yes
2014-09-05 10:19:11:832 948 488 Report CWERReporter finishing event handling. (00000000)
2014-09-05 10:19:11:832 948 488 Report REPORT EVENT: {BA03FFBE-6DAF-414C-A815-175BFC5C2121} 2014-09-05 10:19:11:801-0400 1 162 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 0 SelfUpdate Success Content Download Download succeeded.
2014-09-05 10:19:11:832 948 488 Report REPORT EVENT: {D57FC52F-6612-4872-8C78-C55CA0BF31EA} 2014-09-05 10:19:11:816-0400 1 201 101 {E2FF4526-97D7-4926-8E75-295DBA39C6BF} 1 0 SelfUpdate Success Content Install Installation pending.
2014-09-05 10:19:11:832 948 488 Report CWERReporter finishing event handling. (00000000)
2014-09-05 10:19:11:832 2408 974 Misc =========== Logging initialized (build: 7.5.7601.17514, tz: -0400) ===========
2014-09-05 10:19:11:832 2408 974 Misc = Process: C:\Windows\system32\wuauclt.exe
2014-09-05 10:19:11:832 2408 974 Setup Closing WU explorer windows
2014-09-05 10:19:11:879 2408 974 Setup Found 0 explorer windows
2014-09-05 10:19:12:879 948 488 Setup Launching WuSetupV.exe to complete SelfUpdate
2014-09-05 10:19:13:879 948 488 Setup WuSetupV.exe launched successfully
2014-09-05 10:19:13:879 948 488 Agent * WARNING: Skipping scan, self-update check returned 0x8024001B
2014-09-05 10:19:13:879 2076 a04 Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0400) ===========
2014-09-05 10:19:13:879 2076 a04 Misc = Process: C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe
2014-09-05 10:19:13:879 2076 a04 Setup Performing SelfUpdate installation
2014-09-05 10:19:13:879 948 488 Agent * WARNING: Exit code = 0x8024001B
2014-09-05 10:19:13:879 948 488 Agent *********
2014-09-05 10:19:13:879 948 488 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-05 10:19:13:879 948 488 Agent *************
2014-09-05 10:19:13:879 948 488 Agent WARNING: WU client failed Searching for update with error 0x8024001b
2014-09-05 10:19:13:879 948 a18 AU >>## RESUMED ## AU: Search for updates [CallId = {D25F956B-F486-4B14-9F85-E242F2430CBF}]
2014-09-05 10:19:13:879 948 a18 AU # WARNING: Search callback failed, result = 0x8024001B
2014-09-05 10:19:13:879 948 a18 AU # WARNING: Failed to find updates with error code 8024001B
2014-09-05 10:19:13:879 948 a18 AU #########
2014-09-05 10:19:13:879 948 a18 AU ## END ## AU: Search for updates [CallId = {D25F956B-F486-4B14-9F85-E242F2430CBF}]
2014-09-05 10:19:13:879 948 a18 AU #############
2014-09-05 10:19:13:894 948 a18 AU Successfully wrote event for AU health state:0
2014-09-05 10:19:13:894 948 a18 AU Setting AU scheduled install time to 2014-09-06 07:00:00
2014-09-05 10:19:13:894 948 a18 AU Successfully wrote event for AU health state:0
2014-09-05 10:19:13:894 948 a18 AU Triggering accelerated install by calling UpdateNow
2014-09-05 10:19:13:894 948 a18 AU No installable updates are available
2014-09-05 10:19:13:894 948 a18 AU Successfully wrote event for AU health state:0
2014-09-05 10:19:13:894 2076 a04 Setup Windows Update Agent Client Setup succeeded installing product root.
2014-09-05 10:19:13:894 948 368 AU ########### AU: Uninitializing Automatic Updates ###########
2014-09-05 10:19:13:910 948 368 Report CWERReporter finishing event handling. (00000000)
2014-09-05 10:19:14:457 948 368 Setup Service shutting down while setup is in progress. Attempting to unload core client binaries
2014-09-05 10:19:14:457 948 368 Setup Attempting to close open Windows Update explorer windows
2014-09-05 10:19:14:457 1460 308 Misc =========== Logging initialized (build: 7.5.7601.17514, tz: -0400) ===========
2014-09-05 10:19:14:457 1460 308 Misc = Process: C:\Windows\system32\wuauclt.exe
2014-09-05 10:19:14:457 1460 308 Setup Closing WU explorer windows
2014-09-05 10:19:14:488 1460 308 Setup Found 0 explorer windows
2014-09-05 10:19:15:488 948 368 Setup Attempting to unload unused libraries from svchost
2014-09-05 10:19:15:488 3000 bb4 Misc =========== Logging initialized (build: 7.5.7601.17514, tz: -0400) ===========
2014-09-05 10:19:15:488 3000 bb4 Misc = Process: C:\Windows\system32\cscript.exe
2014-09-05 10:19:15:488 3000 bb4 Misc = Module: C:\Windows\system32\wuapi.dll
2014-09-05 10:19:15:488 3000 bb4 COMAPI Waiting for setup to complete before connecting to service.
2014-09-05 10:19:19:472 948 368 Setup Attempting to unload binaries from event log service
2014-09-05 10:19:19:488 948 368 Service *********
2014-09-05 10:19:19:488 948 368 Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-09-05 10:19:19:488 948 368 Service *************
2014-09-05 10:19:19:894 2076 a04 Setup Installing setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:20:488 3000 bb4 COMAPI Waiting for setup to complete before connecting to service.
2014-09-05 10:19:21:004 2076 a04 Setup Install of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320" succeeded
2014-09-05 10:19:21:004 2076 a04 Setup Installing setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:21:269 2076 a04 Setup Install of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.320" succeeded
2014-09-05 10:19:21:269 2076 a04 Setup Installing setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320"
2014-09-05 10:19:23:160 2076 a04 Setup WARNING: CBS installation failed, error = 0x800F0806
2014-09-05 10:19:23:160 2076 a04 Setup WARNING: Install of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320" failed, error = 0x8024D00E
2014-09-05 10:19:23:160 2076 a04 Setup FATAL: Failed to install package, error = 0x8024D00E
2014-09-05 10:19:23:160 2076 a04 Setup WARNING: Installing applicable setup packages failed, error = 0x8024D00E
2014-09-05 10:19:23:176 2076 a04 Setup Reboot is required. Diagnostic: <0|0>
2014-09-05 10:19:23:191 948 524 Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0400) ===========
2014-09-05 10:19:23:191 948 524 Misc = Process: C:\Windows\system32\svchost.exe
2014-09-05 10:19:23:191 948 524 Misc = Module: c:\windows\system32\wuaueng.dll
2014-09-05 10:19:23:191 948 524 Service *************
2014-09-05 10:19:23:191 948 524 Service ** START ** Service: Service startup
2014-09-05 10:19:23:191 948 524 Service *********
2014-09-05 10:19:23:191 948 524 Agent * WU client version 7.6.7600.320
2014-09-05 10:19:23:191 948 524 Agent * Base directory: C:\Windows\SoftwareDistribution
2014-09-05 10:19:23:191 948 524 Agent * Access type: No proxy
2014-09-05 10:19:23:191 948 524 Agent * Network state: Connected
2014-09-05 10:19:23:238 948 524 Setup Service restarting after SelfUpdate
2014-09-05 10:19:23:238 948 524 Setup Client version: Core: 7.6.7600.320 Aux: 7.5.7601.17514
2014-09-05 10:19:23:238 948 524 Report CWERReporter::Init succeeded
2014-09-05 10:19:23:254 948 524 Report *********** Report: Initializing static reporting data ***********
2014-09-05 10:19:23:254 948 524 Report * OS Version = 6.1.7601.1.0.65792
2014-09-05 10:19:23:254 948 524 Report * OS Product Type = 0x00000004
2014-09-05 10:19:23:269 948 524 Report * Computer Brand = innotek GmbH
2014-09-05 10:19:23:269 948 524 Report * Computer Model = VirtualBox
2014-09-05 10:19:23:269 948 524 Report * Bios Revision = VirtualBox
2014-09-05 10:19:23:269 948 524 Report * Bios Name = Default System BIOS
2014-09-05 10:19:23:269 948 524 Report * Bios Release Date = 2006-12-01T00:00:00
2014-09-05 10:19:23:269 948 524 Report * Locale ID = 1033
2014-09-05 10:19:23:269 948 524 Setup Agent SelfUpdate is still pending.
2014-09-05 10:19:23:269 948 524 Service * Service restarted after self update
2014-09-05 10:19:23:269 948 524 Service WARNING: Failed to read back selfupdate handle from environment variable with error 0x800700cb
2014-09-05 10:19:25:488 948 414 Agent *********** Agent: Initializing Windows Update Agent ***********
2014-09-05 10:19:25:488 948 414 Agent * Prerequisite roots succeeded.
2014-09-05 10:19:25:488 948 414 Agent *********** Agent: Initializing global settings cache ***********
2014-09-05 10:19:25:488 948 414 Agent * WSUS server: <NULL>
2014-09-05 10:19:25:488 948 414 Agent * WSUS status server: <NULL>
2014-09-05 10:19:25:488 948 414 Agent * Target group: (Unassigned Computers)
2014-09-05 10:19:25:488 948 414 Agent * Windows Update access disabled: No
2014-09-05 10:19:25:488 948 414 DnldMgr Download manager restoring 0 downloads
2014-09-05 10:19:25:535 3000 bb4 COMAPI ----------- COMAPI: IUpdateServiceManager::AddService2 -----------
2014-09-05 10:19:25:535 3000 bb4 COMAPI - Service ID = {7971f918-a847-4430-9279-4a52d1efe18d}
2014-09-05 10:19:25:535 3000 bb4 COMAPI - Allow pending registration = No; Allow online registration = Yes; Register service with AU = Yes
2014-09-05 10:19:25:535 3000 bb4 COMAPI - Authorization cab path = <NULL>
2014-09-05 10:19:26:191 2076 a04 Setup WuSetup has finished. Exit code is 0x00000000
2014-09-05 10:19:28:332 948 410 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80190194
2014-09-05 10:19:28:332 948 410 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80190194
2014-09-05 10:19:28:332 948 410 Misc WARNING: DownloadFileInternal failed for http://ds.download.windowsupdate.com/v11/2/windowsupdate/redir/v6-win7sp1-wuredir.cab: error 0x80190194
2014-09-05 10:19:31:894 948 410 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80190194
2014-09-05 10:19:31:894 948 410 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80190194
2014-09-05 10:19:31:894 948 410 Misc WARNING: DownloadFileInternal failed for http://download.microsoft.com/v11/2/windowsupdate/redir/v6-win7sp1-wuredir.cab: error 0x80190194
2014-09-05 10:19:35:410 948 410 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\Redir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-win7sp1-wuredir.cab with dwProvFlags 0x00000080:
2014-09-05 10:19:50:847 948 410 Misc Microsoft signed: NA
2014-09-05 10:19:50:847 948 410 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\Redir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0x00000080:
2014-09-05 10:19:50:847 948 410 Misc Microsoft signed: NA
2014-09-05 10:19:50:847 948 410 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\Redir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP4AD1.tmp with dwProvFlags 0x00000080:
2014-09-05 10:20:08:238 948 524 AU ########### AU: Initializing Automatic Updates ###########
2014-09-05 10:20:08:238 948 524 AU Need to reset accelerated install required state
2014-09-05 10:20:08:238 948 524 AU Accelerate Install required state reset
2014-09-05 10:20:08:238 948 524 AU # AU disabled through Policy
2014-09-05 10:20:08:238 948 524 AU # Will interact with non-admins (Non-admins are elevated (User preference))
2014-09-05 10:20:08:238 948 524 AU Initializing featured updates
2014-09-05 10:20:08:238 948 524 AU Found 0 cached featured updates
2014-09-05 10:20:08:238 948 524 AU Successfully wrote event for AU health state:0
2014-09-05 10:20:09:754 948 410 Misc Microsoft signed: NA
2014-09-05 10:20:09:769 948 410 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\Redir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:09:769 948 410 Misc Microsoft signed: NA
2014-09-05 10:20:09:769 948 410 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\Redir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP94BC.tmp with dwProvFlags 0x00000080:
2014-09-05 10:20:09:769 948 410 Misc Microsoft signed: NA
2014-09-05 10:20:09:769 948 410 Agent Downloading new auth cab for service 7971f918-a847-4430-9279-4a52d1efe18d at http://ds.download.windowsupdate.com/v11/2/microsoftupdate/redir/v6-muauth.cab
2014-09-05 10:20:10:176 948 410 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:10:191 948 410 Misc Microsoft signed: NA
2014-09-05 10:20:10:191 948 410 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:10:191 948 410 Misc Microsoft signed: NA
2014-09-05 10:20:10:191 948 410 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\TMP9663.tmp with dwProvFlags 0x00000080:
2014-09-05 10:20:10:207 948 410 Misc Microsoft signed: NA
2014-09-05 10:20:10:207 948 410 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-09-05 10:20:10:222 948 410 Agent Caller My App successfully opted in to service 7971f918-a847-4430-9279-4a52d1efe18d
2014-09-05 10:20:10:222 948 410 DtaStor Update service properties: service registered with AU is {7971F918-A847-4430-9279-4A52D1EFE18D}
2014-09-05 10:20:10:222 948 9a4 Report REPORT EVENT: {CA51C263-479F-464D-ADED-8AAFDAD3DFBC} 2014-09-05 10:19:23:269-0400 1 190 101 {174EAAC7-5A3D-448F-BE6F-D6FE450E1DCF} 1 0 SelfUpdate Success Content Install Installation Successful: Windows successfully installed the following update: Windows Update ActiveX
2014-09-05 10:20:10:222 948 9a4 Report REPORT EVENT: {AB991117-4F0A-4AE9-9321-482E26AA3D67} 2014-09-05 10:19:23:269-0400 1 190 101 {E2FF4526-97D7-4926-8E75-295DBA39C6BF} 1 0 SelfUpdate Success Content Install Installation Successful: Windows successfully installed the following update: Windows Update Core
2014-09-05 10:20:10:222 948 524 AU Successfully wrote event for AU health state:0
2014-09-05 10:20:10:222 948 524 AU AU finished delayed initialization
2014-09-05 10:20:10:222 948 524 AU Service Provider info changed
2014-09-05 10:20:10:222 948 524 AU AU Refresh required....
2014-09-05 10:20:10:222 948 524 AU AU setting next detection timeout to 2014-09-05 14:30:10
2014-09-05 10:20:10:222 948 524 AU AU setting next featured software notification timeout to 2014-09-05 14:20:10
2014-09-05 10:20:10:222 948 524 AU Successfully wrote event for AU health state:0
2014-09-05 10:20:10:222 3000 bb4 COMAPI - Added service, URL = https://fe2.update.microsoft.com/v6/
2014-09-05 10:20:10:222 948 9a4 Report CWERReporter finishing event handling. (00000000)
2014-09-05 10:20:10:238 3000 bb4 COMAPI -------------
2014-09-05 10:20:10:238 3000 bb4 COMAPI -- START -- COMAPI: Search [ClientId = <NULL>]
2014-09-05 10:20:10:238 3000 bb4 COMAPI ---------
2014-09-05 10:20:10:254 948 9a4 Agent *************
2014-09-05 10:20:10:254 948 9a4 Agent ** START ** Agent: Finding updates [CallerId = ]
2014-09-05 10:20:10:254 948 9a4 Agent *********
2014-09-05 10:20:10:254 948 9a4 Agent * Online = Yes; Ignore download priority = No
2014-09-05 10:20:10:254 948 9a4 Agent * Criteria = "IsInstalled = 0 and IsHidden = 0"
2014-09-05 10:20:10:254 948 9a4 Agent * ServiceID = {00000000-0000-0000-0000-000000000000} Third party service
2014-09-05 10:20:10:254 948 9a4 Agent * Search Scope = {Machine}
2014-09-05 10:20:10:254 3000 bb4 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = <NULL>]
2014-09-05 10:20:10:254 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:10:254 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:10:254 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP96A2.tmp with dwProvFlags 0x00000080:
2014-09-05 10:20:10:254 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:10:879 948 9a4 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80190194
2014-09-05 10:20:10:879 948 9a4 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80190194
2014-09-05 10:20:10:879 948 9a4 Misc WARNING: DownloadFileInternal failed for http://ds.download.windowsupdate.com/v11/2/windowsupdate/redir/v6-win7sp1-wuredir.cab: error 0x80190194
2014-09-05 10:20:11:316 948 9a4 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80190194
2014-09-05 10:20:11:316 948 9a4 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80190194
2014-09-05 10:20:11:316 948 9a4 Misc WARNING: DownloadFileInternal failed for http://download.microsoft.com/v11/2/windowsupdate/redir/v6-win7sp1-wuredir.cab: error 0x80190194
2014-09-05 10:20:11:613 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\v6-win7sp1-wuredir.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:11:613 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:11:613 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:11:613 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:11:613 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP9BF3.tmp with dwProvFlags 0x00000080:
2014-09-05 10:20:11:613 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:11:629 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:11:629 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:11:629 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP9C03.tmp with dwProvFlags 0x00000080:
2014-09-05 10:20:11:629 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:11:629 948 9a4 Agent Checking for updated auth cab for service 7971f918-a847-4430-9279-4a52d1efe18d at http://ds.download.windowsupdate.com/v11/2/microsoftupdate/redir/v6-muauth.cab
2014-09-05 10:20:11:629 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:11:629 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:11:879 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:11:879 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:12:316 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\v6-muredir.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:12:332 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:12:332 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\wuredir.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:12:332 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:12:332 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\TMP9EC3.tmp with dwProvFlags 0x00000080:
2014-09-05 10:20:12:332 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:12:332 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\wuredir.cab with dwProvFlags 0x00000080:
2014-09-05 10:20:12:332 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:12:332 948 9a4 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\TMP9EC4.tmp with dwProvFlags 0x00000080:
2014-09-05 10:20:12:347 948 9a4 Misc Microsoft signed: NA
2014-09-05 10:20:12:347 948 9a4 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-09-05 10:20:12:347 948 9a4 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
2014-09-05 10:20:46:707 948 9a4 PT WARNING: Cached cookie has expired or new PID is available
2014-09-05 10:22:08:988 948 9a4 PT WARNING: SyncUpdates failure, error = 0x80244022, soap client error = 10, soap error code = 0, HTTP status code = 503
2014-09-05 10:22:08:988 948 9a4 PT WARNING: PTError: 0x80244022
2014-09-05 10:22:08:988 948 9a4 PT WARNING: SyncUpdates_WithRecovery failed.: 0x80244022
2014-09-05 10:22:08:988 948 9a4 PT WARNING: Sync of Updates: 0x80244022
2014-09-05 10:22:08:988 948 9a4 PT WARNING: SyncServerUpdatesInternal failed: 0x80244022
2014-09-05 10:22:08:988 948 9a4 Agent * WARNING: Failed to synchronize, error = 0x80244022
2014-09-05 10:22:08:988 948 9a4 Agent * WARNING: Exit code = 0x80244022
2014-09-05 10:22:08:988 948 9a4 Agent *********
2014-09-05 10:22:08:988 948 9a4 Agent ** END ** Agent: Finding updates [CallerId = ]
2014-09-05 10:22:08:988 948 9a4 Agent *************
2014-09-05 10:22:08:988 948 9a4 Agent WARNING: WU client failed Searching for update with error 0x80244022
2014-09-05 10:22:08:988 948 9a4 Report CWERReporter finishing event handling. (00000000)
2014-09-05 10:22:08:988 3000 a60 COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = <NULL>]
2014-09-05 10:22:08:988 3000 a60 COMAPI - Updates found = 0
2014-09-05 10:22:08:988 3000 a60 COMAPI - WARNING: Exit code = 0x00000000, Result code = 0x80244022
2014-09-05 10:22:08:988 3000 a60 COMAPI ---------
2014-09-05 10:22:08:988 3000 a60 COMAPI -- END -- COMAPI: Search [ClientId = <NULL>]
2014-09-05 10:22:09:004 3000 a60 COMAPI -------------
2014-09-05 10:22:09:004 3000 bb4 COMAPI WARNING: Operation failed due to earlier error, hr=80244022
2014-09-05 10:22:09:004 3000 bb4 COMAPI FATAL: Unable to perform synchronous search. (hr=80244022)
2014-09-05 10:22:09:004 3000 bb4 COMAPI ISusInternal::DisconnectCall failed, hr=8024000C
2014-09-05 10:22:09:004 3000 bb4 COMAPI waiting for worker thread to complete
2014-09-05 10:22:13:988 948 9a4 Report REPORT EVENT: {E34AC131-9B2E-45FB-AAED-2BFE32EB58FC} 2014-09-05 10:22:08:988-0400 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80244022 Failure Software Synchronization Windows Update Client failed to detect with error 0x80244022.
2014-09-05 10:22:14:066 948 9a4 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-09-05 10:22:14:066 948 9a4 Report WER Report sent: 7.6.7600.320 0x80244022 00000000-0000-0000-0000-000000000000 Scan 101 Unmanaged
2014-09-05 10:22:14:066 948 9a4 Report CWERReporter finishing event handling. (00000000)
About 10 minutes later, I ran ZTIWindowsUpdate.wsf /debug:true, manually & it worked.
Is this a timing issue?
Is there anything I can do to help avoid failures like this, such as adding a 30 second pause for all TS' just before the "Windows Update (Pre-Application Installation)" step?No clue, http 503 suggests some kind of server error.
This article:
http://windows.microsoft.com/en-us/windows/windows-update-error-80244022#1TC=windows-7 suggests that it's some kind of network connectivity issue.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com -
Office Home and Student 2010 Install problems with a Key Code Err..
I had to install a new hard drive, lost everything..So I upgraded to Windows 7 Professional ..
I own a the 2010 Home and Student CD bought at the Microsoft store...Doesn't come with Outlook...
So I ordered the Home and Business 2010 disc with Service Pack 1 Included, this has 2010 outlook ...It loaded and worked fine up to the point I had to replace my Drive with New Windows 7 Pro...
Everything loaded find, but every time I try and use it, its acts like it is caught in some kind of loop...It keep trying install and configure, then ask for my Key Code every time, sort of like a OLMAP132.Dll err...I did manage to make it work once, I even
got back the test email from Microsoft after setting up Outlook....Then when I rebooted the system, this same loop action started ...
I have uninstalled this at least 4 times, searched for anything with ties to Microsoft office, and uninstalled it..Then did a New Clean Install...Still getting this key Code question every time I open up a Office program....So, I am saying without a doubt,
2010 Office Home and Student and Business WILL NOT RUN on Windows 7 professional ......If you have any idea how to fix this..Please respond with facts on how to repair this please....Greta,,,After down loading ( Off Cat ) tools...I saved that program...However, there is another major problem with Your Instructions I ran into...It seems I'm not the trusted source to change files such as the Mapi32.dll files..So I was unable to attempt
your repair ...However I have found instructions for the task, but it seems very complicated for sure.. Here are the instructions, and I would like for you and maybe a co-worker to check these.. before I make any changes in system..
How to Change the Trusted Installer name...
1. Right Click on the File Or directory.
2.Click On properties, on the Right Click menu.
3.Click On "" Security "" tab
4.Click On " Advanced" Button on the bottom.
5.In the advance Security Dialog Window, Click on "" Owner "" tab
6.Here you will able to see the Current Owner ( ie: Trusted Installed )
7. To take owner ship of the object, click on the Edit button, Give permission to UAC , the highlight the user name in the " Change Owner To" box that you want to assign as the owner for the object. Then Click " OK " to finish the process.
8.Back in the Advanced Security Settings Window , You will see the current owner has changed to the user you just selected.
9.Click the ""OK "" and exit this window.
10. Click "'OK"" again, to exit completely from the Properties window..
11. Repeat Step 1 to 4 to open the object's Properties Window again...
12.Back in Object's Properties window, click on the edit button , and confirm the UAC elevation request.
13. Highlight the Administrators in the " group of users names"" box. If the user ID or group that you want to manage the permissions for the object doesn't exist, Click on.."" Add"" button, and type in the user name or
group name desired into the "" Enter Object names to select ( can use Everyone as user Name)" box and finish off by clicking on the "" OK""
14. In the permissions for Administrators box below ( or any other user name or group name you choose). click on ""Full Control"" under the ""Allow"" column to assign full access rights control permission to Administrator's
group....
http//windows.microsoft.com/en-us/windows-vista/troubleshoot-access-denied-when opening-files-or-folders. -
iTunes quit unexpectedly during the download of a movie. When I click on that movie now I get the following message: "You have already purchased this item but it has not been downloaded. To download it, select Check For Available Downloads from the Store menu."
I follow the instructions, but the download still doesn't resume - err = 11111
Any advice?Yeah, I am going to blast my iPhone for the 4th time today and pray this goes away. I had 6 apps showing updates, the 6 badge icon shows on the App Store on my iPhone and, having run them all, the 6 apps have two copies each on my iPhone: one that is the old version of the app and will not run and the other is a faded version of the app with an empty progress bar on the icon. Click those and you get an error message about connecting to iTunes, etc. as described in the article I linked to above.
It gets stranger than this. If I install a completely NEW app, the 6 that are stuck mid-update heal themselves and appear with the new version only, however now completely different apps (Hold Em for instance - which I did not update and didn't need an update) will not launch "app name Cannot Launch" message comes up.
Agh! -
[Feature Request] Seperate tab in log window for System.err
By default, the stack traces of exceptions (and throwables in general) are printed to the System.err stream. So, wouldn't it be useful to include a 2nd tab for System.err messages?
It could be optional to either include or leave out the System.err output in the System.out tab.
The whole idea of this 2nd tab is to set it up like the search output tab: a tree-like list which can be expanded to see the stack trace of each exception that occured during runtime. A small parser can parse the stack trace when an exception is printed on the System.err stream and format it.
If this option would be availble in the debugger only, that would be ok too, I guess. Although, the debugger already has some other means of jumping through code when an exception is thrown (ie, when the debugger 'pauses' runtime).I've logged an Enhancement request to improve the handling of System.err messages (2811508). There are ways to enhance the treatment of System.err messages without introducing a new tab, through the use of color, links back to the source code, and collapsing of entire stack traces to a single line (with a button to see the entire trace).
Thanks!
-- Brian -
Error message on the new iOS 4.3.5 update (err= -3259).
Ive tried to update my 3G Ipod Touch with the new iOS 4.3.5, but when the download is on the last 0.1 MB it says ive lost connection, when I havent. Everytime it stops working I get a error message (err= -3259). How can I fix this without taking down my anti-virus or anything like that? I just need a simple solution. Thanks
The simple solution is to temporarily disable anti-virus and firewall software during the update process. Why would you not want to do that? Any threat is non-existent.
Depending on your anti-virus & firewall software it may be possible to make exceptions for certain programs like iTunes and certain ports used during the update. This, however, is more trouble than it is worth. -
Hi All,
I am getting the error "Err#-600 msg ORA-00600: internal error code, arguments: [4000], [7089]" while running a package. Could not able to get detailed info on this. Please someone help in resolving the above error.
Thanks,
Karthihttp://orafaq.com/wiki/ORA-00600
You can follow Nikolay's advice or try to find a workaround yourself by rewriting your query using a somehow different approach
Regards
Etbin -
LPX-00601: Invalid token in: err while trying to read data from xml
Hey ,
While trying to read data from xml i got err:
LPX-00601: Invalid token in: 'path'
the proc. i'm using to read data from the xml is:
procedure read_xml_file_test (in_filename in varchar2)
is
my_dir varchar2(20) := 'XML_DIR;
cur_emp2 number:=0;
l_bfile BFILE;
l_clob CLOB;
l_parser dbms_xmlparser.Parser;
l_doc dbms_xmldom.DOMDocument;
l_nl dbms_xmldom.DOMNodeList;
l_nl2 dbms_xmldom.DOMNodeList;
l_n dbms_xmldom.DOMNode;
l_n2 dbms_xmldom.DOMNode;
l_temp VARCHAR2(1000);
v_errors internet_clients.errors%type;
src_csid NUMBER := NLS_CHARSET_ID('UTF8');
dest_offset INTEGER := 1;
src_offset INTEGER := 1;
lang_context INTEGER := dbms_lob.default_lang_ctx;
warning INTEGER;
v_count number := 0; --total records
v_count_s number := 0; -- sucsess record
v_count_f number := 0; -- failed record
v_flag varchar2(1);
v_char2 varchar2(1);
v_l1 VARCHAR2(255);
v_l2 VARCHAR2(255);
v_l3 VARCHAR2(255);
v_l4 VARCHAR2(255);
v_l6 VARCHAR2(255);
BEGIN
l_bfile := BFileName(my_dir, in_filename);
dbms_lob.createtemporary(l_clob, cache=>FALSE);
dbms_lob.open(l_bfile, dbms_lob.lob_readonly);
dbms_lob.loadclobfromfile(l_clob, l_bfile, dbms_lob.getlength(l_bfile), dest_offset,src_offset, src_csid, lang_context, warning);
dbms_lob.close(l_bfile);
-- make sure implicit date conversions are performed correctly
dbms_session.set_nls('NLS_DATE_FORMAT','''DD/MM/RR HH24:MI:SS''');
-- Create a parser.
l_parser := dbms_xmlparser.newParser;
-- Parse the document and create a new DOM document.
dbms_xmlparser.parseClob(l_parser, l_clob);
l_doc := dbms_xmlparser.getDocument(l_parser);
-- Free resources associated with the CLOB and Parser now they are no longer needed.
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
-- Get a list of all the nodes in the document using the XPATH syntax.
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');
-- Loop through the list and create a new record in a tble collection
-- for each record.
FOR cur_emp IN 0 .. dbms_xmldom.getLength(l_nl) - 1 LOOP
l_n := dbms_xmldom.item(l_nl, cur_emp);
cur_emp2:=0;
loop
v_count := v_count + 1;
begin
-- Use XPATH syntax to assign values to he elements of the collection.
dbms_xslprocessor.valueOf(l_n,'L1/text()',v_l1);
dbms_xslprocessor.valueOf(l_n,'L2/text()',v_l2);
dbms_xslprocessor.valueOf(l_n,'L3/text()',v_l3);
dbms_xslprocessor.valueOf(l_n,'L4/text()',v_l4);
dbms_xslprocessor.valueOf(l_n,'L6/text()',v_l6);
exception
when others then
null;
end;
exit when cur_emp2=dbms_xmldom.getLength(l_nl2);
END LOOP;
end loop;
-- Free any resources associated with the document now it
-- is no longer needed.
dbms_xmldom.freeDocument(l_doc);
--remove file to another directory
--COMMIT; -- do not use the commit if you want to run this proc. from within the search_dir_list proc , because it execute a select from tmp table dir_list which contain a "on commit delete rows" clause.
/*EXCEPTION
/*WHEN OTHERS THEN
dbms_lob.freetemporary(l_clob);
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(l_doc);
null;
ROLLBACK; */
END;While trying to execute this i got:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP'
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 939
ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 967
ORA-06512: at "MARKET.READ_XML_FILE_TEST", line 51
ORA-06512: at line 1
i guess i mised somthing at the line
l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');i attached here part of my xml:
<?xml version="1.0" encoding="UTF-8" ?>
- <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <soap:Body>
- <GetFieldsNameResponse xmlns="http://tempuri.org/">
- <GetFieldsNameResult>
- <xs:schema id="DataSet_FRM_GANERIC_PROP" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
- <xs:element name="DataSet_FRM_GANERIC_PROP" msdata:IsDataSet="true" msdata:Locale="he-IL">
- <xs:complexType>
- <xs:choice minOccurs="0" maxOccurs="unbounded">
- <xs:element name="FRM_GANERIC_PROP">
- <xs:complexType>
- <xs:sequence>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
- <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
- <DataSet_FRM_GANERIC_PROP xmlns="">
- <FRM_GANERIC_PROP diffgr:id="FRM_GANERIC_PROP1" msdata:rowOrder="0">
<L1>val1</L1>
<L2>val2</L2>
<L3>val3</L3>
<L4>val4</L4>
<L6>val6</L6>
</FRM_GANERIC_PROP>
</DataSet_FRM_GANERIC_PROP>
</diffgr:diffgram>
</GetFieldsNameResult>
</GetFieldsNameResponse>
</soap:Body>
</soap:Envelope>I Guess it somthing that have to do with node definition ,
but i have tried so many combinations and none ot those worked for me.
i'm deeply stuck here.
What do i miss here?
THANKS yair
Edited by: yair_k on 02:30 14/10/2010Hey , after got a lot of success with the xml reading part , i wonder if you
can help me with a problem while trying to reading that xml from a web service.
i use a procedure as followes:
FUNCTION read_from_web_service(in_username in varchar2 , in_password in varchar2)
RETURN CHAR
AS
l_service UTL_DBWS.service;
l_call UTL_DBWS.call;
l_a_ns VARCHAR2(32767);
l_wsdl_url VARCHAR2(32767);
l_namespace VARCHAR2(32767);
l_service_qname UTL_DBWS.qname;
l_port_qname UTL_DBWS.qname;
l_operation_qname UTL_DBWS.qname;
l_xmltype_in SYS.XMLTYPE;
l_xmltype_out SYS.XMLTYPE;
l_return VARCHAR2(32767);
BEGIN
l_wsdl_url := 'http://www.company.com/publisherService/ServiceGetpublisherTable.asmx?wsdl';
l_namespace := 'http://tempuri.org/';
l_service_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTable');
l_port_qname := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTableSoap');
l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'GetFieldsName');
l_service := UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_qname);
l_call := UTL_DBWS.create_call (
service_handle => l_service,
port_name => l_port_qname,
operation_name => l_operation_qname);
l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
<GetFieldsName xmlns="' || l_namespace || '">
<user>' || in_username || '</user>
<password>'|| in_password || '</password>
</GetFieldsName>');
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
UTL_DBWS.release_call (call_handle => l_call);
UTL_DBWS.release_service (service_handle => l_service);
l_return := l_xmltype_out.extract('//GetFieldsName/text()').getstringVal();
dbms_output.put_line(l_return);
RETURN l_return;
END;but when i run it i got message:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: Server did not recognize the value of HTTP Header SOAPAction: .
regarding the line:
l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
request => l_xmltype_in);
So , i deeply stuck here!
my web service description is:
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
- <wsdl:types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
- <s:element name="GetFieldsName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFieldsNameResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetFieldsNameResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMSG_ByUser_Not_ReadedResponse">
- <s:complexType>
- <s:sequence>
- <s:element minOccurs="0" maxOccurs="1" name="GetMSG_ByUser_Not_ReadedResult">
- <s:complexType>
- <s:sequence>
<s:element ref="s:schema" />
<s:any />
</s:sequence>
</s:complexType>
</s:element>
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_Readed">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="Rec_Id" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="SetMSG_ByUser_Not_Readed_As_ReadedResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="1" maxOccurs="1" name="SetMSG_ByUser_Not_Readed_As_ReadedResult" type="s:boolean" />
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
- <wsdl:message name="GetFieldsNameSoapIn">
<wsdl:part name="parameters" element="tns:GetFieldsName" />
</wsdl:message>
- <wsdl:message name="GetFieldsNameSoapOut">
<wsdl:part name="parameters" element="tns:GetFieldsNameResponse" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_Readed" />
</wsdl:message>
- <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_ReadedResponse" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapIn">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_Readed" />
</wsdl:message>
- <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapOut">
<wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_ReadedResponse" />
</wsdl:message>
- <wsdl:portType name="ServiceGetpublisherTableSoap">
- <wsdl:operation name="GetFieldsName">
<wsdl:input message="tns:GetFieldsNameSoapIn" />
<wsdl:output message="tns:GetFieldsNameSoapOut" />
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<wsdl:input message="tns:GetMSG_ByUser_Not_ReadedSoapIn" />
<wsdl:output message="tns:GetMSG_ByUser_Not_ReadedSoapOut" />
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<wsdl:input message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapIn" />
<wsdl:output message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ServiceGetpublisherTableSoap" type="tns:ServiceGetpublisherTableSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="ServiceGetpublisherTableSoap12" type="tns:ServiceGetpublisherTableSoap">
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetFieldsName">
<soap12:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="GetMSG_ByUser_Not_Readed">
<soap12:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
- <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
<soap12:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ServiceGetpublisherTable">
- <wsdl:port name="ServiceGetpublisherTableSoap" binding="tns:ServiceGetpublisherTableSoap">
<soap:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
- <wsdl:port name="ServiceGetpublisherTableSoap12" binding="tns:ServiceGetpublisherTableSoap12">
<soap12:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>also i have to mention that i have changed publisher references inside the code , and i also canot
supply username and password , so i guess you canot test it. still i not shure if my definitions (namespace est.) inside my code defined correctly.
hope you can help me with this.
regards
yair -
SSHR V4 upgrade err (oracle.jbo.NoDefException: JBO-25002)
SSHR V4 upgrade err (oracle.jbo.NoDefException: JBO-25002)
We have recently applied patch 2111325, prequisites patches ,We
have gone thru the README text and html files and did the
neccessary changes.
Created a sample test user with Employee Self-Service V4.0,
Standard/ HR Professional V4.0, Standard responsibilities but
get the same error on all the menu items.
The error URL/ err text are included below. Please suggest a fix
the problem we are having or any pointers to the fix. I can send
the Jserv.Properties file in case you need it.
SSHR V4 access URL:
http://<hostname>:8008/OA_HTML/OA.jsp?
akRegionCode=HR_PROCESS_MY_SUS_EDA_TOP_SS&akRegionApplicationId=8
00&dbc=dev1_ptch&language_code=US&transactionid=CCEB9292A184B222&
pMode=EDA&pFromMenu=Y
ERROR MESSAGE/ TEXT:
Error Page
oracle.apps.fnd.framework.OAException: Application: FND, Message
Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE =
oracle.jbo.NoDefException: JBO-25002: Definition
oracle.apps.per.selfservice.common.server.CommonAM of type
ApplicationModule not found; (NOTE: This message could not be
looked up because an Application Module has not been set on the
exception)
at oracle.apps.fnd.framework.OAException.wrapperException
(OAException.java:383)
at oracle.apps.fnd.framework.OAApplicationPoolImpl.checkout
(OAApplicationPoolImpl.java:49)
at
oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.register
ApplicationModule(OAJSPApplicationRegistry.java:149)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage
(OAPageBean.java:570)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage
(OAPageBean.java:232)
at oa_html._OA._jspService(_OA.java:69)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
at oracle.jsp.app.JspApplication.dispatchRequest
(JspApplication.java)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java)
at oracle.jsp.JspServlet.internalService(JspServlet.java)
at oracle.jsp.JspServlet.service(JspServlet.java)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
at org.apache.jserv.JServConnection.processRequest
(JServConnection.java:314)
at org.apache.jserv.JServConnection.run
(JServConnection.java:188)
at java.lang.Thread.run(Unknown Source)
## Detail 0 ##
oracle.jbo.NoDefException: JBO-25002: Definition
oracle.apps.per.selfservice.common.server.CommonAM of type
ApplicationModule not found
at oracle.jbo.server.MetaObjectManager.findMetaObject
(MetaObjectManager.java:354)
at oracle.jbo.server.ApplicationModuleDefImpl.findDefObject
(ApplicationModuleDefImpl.java:158)
at
oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModu
le(ApplicationModuleImpl.java:257)
at oracle.jbo.server.ApplicationModuleHomeImpl.create
(ApplicationModuleHomeImpl.java:85)
at oracle.jbo.common.ampool.ApplicationPoolImpl.createNewInstance
(ApplicationPoolImpl.java:511)
at oracle.jbo.common.ampool.ApplicationPoolImpl.checkout
(ApplicationPoolImpl.java:634)
at oracle.apps.fnd.framework.OAApplicationPoolImpl.checkout
(OAApplicationPoolImpl.java:43)
at
oracle.apps.fnd.framework.webui.OAJSPApplicationRegistry.register
ApplicationModule(OAJSPApplicationRegistry.java:149)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage
(OAPageBean.java:570)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage
(OAPageBean.java:232)
at oa_html._OA._jspService(_OA.java:69)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java)
at oracle.jsp.app.JspApplication.dispatchRequest
(JspApplication.java)
at oracle.jsp.JspServlet.doDispatch(JspServlet.java)Hi Dani,
Eventually I found the problem, it is reported in Oracle Support as Doc ID 1503173.1.
It seems jDeveloper is a bit special when adding Directories to the MAR file. If the whole directory "/oracle" is added, the adf-config.xml introduces the following line:
namespace metadata-store-usage="WebCenterFileMetadataStore" path="/oracle"/
As a result, this diverts all /oracle/... file and class requests to MDS, which causes failures.
So when editing the MAR deployment profile be careful to select the sub-directories under /oracle/webcenter/portalapp/ one by one.
Added to this, I had to perform the cleaning process you suggested to make it work too, otherwise I get a different error...
Final steps are:
1. Undeploy application.
2. Delete MDS partition.
3. Shutdown managed server.
4. Delete /cache and /tmp content for the managed server.
5. Start managed server.
6. Exectute Clean all in jDeveloper.
7. Create a new mar deployment as described in SR 1503173.1.
8. Deploy to EAR file.
9. Deploy new application to managed server using Enterprise Manager.
And it works!
Thanks for your help!
Maybe you are looking for
-
IMovie '09' is not working correctly
My iMovie '09 used to work fine, and now everytime I try to work on a movie project, the program freezes after I perform one action, and I'm have to force quit the application. My software is completely updated. Any ideas?
-
IOS 5: Completed reminders still show up in Notification screen
My iPhone 4 shows completed reminders correctly in the Reminders app, that is to say, in the Completed tab. However, the completed reminder still appears in Notifications, when I swipe my finger down, even though the reminder is completed. That can't
-
What to do with t0 in Get Waveform Subset.vi
I am new to LabVIEW. I was trying to look at the Get Waveform Subset.vi, and it doesn't explain what to put in for t0. At the moment, when I try and put my waveform through the subset VI and display that on a separate waveform, I get nothing displa
-
I have a question? I update my macbook pro but every time I do and I go back to where it says software update it says that if I want to update my pro I just did, and Im using Mac Os X snow leopard is it that I have to upgrade to lion?
-
Funds management and project budgeting
Hi We have funds managment activated for operational expenses(OPEX). Project budget will be used for all CAPEX requirements. However, there will be common G/L accounts used in both operational expenses and capital expenses. For eg. steel could be iss