Err : crm :- nfoObject 0CRMCC_CAT does not fulfill ref. integrity

Hi all,
when i tried to load the data from crm to bi i am geeting the error as
InfoObject 0CRMCC_CAT does not fulfill ref. integrity in record 4 in value DDCE7E1500654BF1A798005056A53FFA
but i already checked the refrence integrity check box.
please help me on this issue
Regards,
siva.

hi Ajeet,
thanks for ur valuable reply ..I can able to see only one checkbox related to Referenical intergrity in the Infosource.
Can you pls help where are the two places we can able to see Referenical intergrity Options.
Pls suggest.
Thanks,
Siva.

Similar Messages

InfoObject ZPRODGRP does not fulfill ref. integrity in record 39435 in valu

Hi Gurus,
There is a query which is related to master data. While updating the infocube we are getting the error InfoObject ZPRODGRP does not fulfill ref. integrity in record 39435 in value 58240, we have maintained the ref. integrity value 58240 in BW but still getting the same error message.
Please help me out in this issue.

Hi Bhanu Gupta,
I have checked it in the SID Table of Product Group /BIC/SZPRODGRP it exists in the SID table, but when i try to look into the CUBE with the particular product group it says that it does not exist with that value.
I have seen many of your replies which are quite knowledgeble.
Please advise me soon what is to be done.

Infoobject 0doc_number does not fulfill ref.integrity in record 1

Hi BW Experts,
I am facing an error in quality server "infoobject 0doc_number does not fulfill ref.integrity in record" while scheduling the infopackage. But it was working fine in development server.
While scheduling the infopackage i have choosen the option "always update data if no master data exists for the data"
Also tried with the "Do not update data if no master data exists for a characteristic"
Can anyone help me with solution as this issue is critical for me.
Points rewarded.

Ganesh,
I want to add one more point... i can't comment whether do we need to add the Referencial Integrety Check for Document Number .i.e 0DOC_NUMBER.
One thing i want to say is that It is mainly for BW integrated with Flat Files, DB Connect etc. also for SAP Systems if any conversion routine exists. Other wise SAP Systems will provide correct Data. If other non-SAP Systems connected to BW, it's better to add that Check. That will put some extra check while loading data. still it is good practice.
1. Try with Option Load Data without Master data.
2. if above option won't work, try load Master Data first. It will create SID for New Documents. then load the Transactional Data.
I think you already tried 1st option. you didn't tried 2nd option.
Let me know how it goes.
Regards,
Nagesh Ganisetti.
*Keep Update the Status that will help us.

Record 799 :InfoObject YEKEYBRND does not fulfill ref. integrity in record

Hi every body
I Triggered a load and the load failed giving the error 'Record 799 :InfoObject YEKEYBRND does not fulfill ref. integrity in record 799 in value 0599 '.
Can anybody explain me clearly the meaning of the error.
Thanks&Regards
Raghavendra Reddy Bijevemula

Hi,
Check whether the value has maintained in the SID table for the info object YEKEYBRND thru BIC/SYEKETBRAND..
if it exixts the u have to repair ur infoobject in the RSRV.
Check the link..
http://help.sap.com/saphelp_bw31/helpdata/en/3a/14c43bb7137503e10000000a11402f/content.htm
Re: Referential Integrity check
Regards-
MM
Assign points if it helps
Message was edited by: vishnuC
Message was edited by: vishnuC
Message was edited by: vishnuC

InfoObject 0DOC_NUMBER does not fulfill ref. integrity in record

Hi
I am getting this error
InfoObject 0DOC_NUMBER does not fulfill ref. integrity in record
Please help me resolve this issue.
Thanks,
Amit

Hi Amit,
I think in the infopackage u will have setting load data eventhough no master data exist.This will help u to fix the data load.During Transaction data loading usefully the Referential will be checked if u have enabled the option in infopackage.
U have Two Solution to this issue :
one to load the master data before transaction data
another one u can set in infopackage load data eventhogh no master data Exist in the infopackage.
Assign points if this is useful
regards
Arun

Managed system SOL~JAVA does not fulfill the Diagnostics prerequisites

Hi Experts,
I am getting error error while doing manged System configuration in Solman through solman_setup.In step 2 during prerequisite check I am getting error "Managed system SOL~JAVA does not fulfil the Diagnostics prerequisites" for java and abap too. In LMDB I checked the Host assigned to this technical system.Please refer screen shot for the entry. Please suggest where I am committing mistake.
Thanks
Aditya

Thanks Karthik & Kamil,
During SLD preparation in System Preparation phase I had updated the CR/CIM of SLD but I committed a mistake that I applied the CR (From 8.x to 9.0) and then (From 9.x to 9.y) without doing it sequentially from (1.x to 2.0) then from (2.x to 3.0) and so on as per 669669. It didn't give any error.As of now it is showing CIM1.6.38 and CR 9.13. Is my current problem related to this?
Current error message is saying (The definition of Technical System 'SOL~ABAP' is not correct: 'SOL~ABAP': Technical System must be installed onat least one Host.) similarly for Java (The definition of
Technical System 'SOL~JAVA' is not correct: 'SOL~JAVA': Technical System must be installed on at least one Host.).In LMDB I can see in technical system Abap and Java has host assigned to it.Plz suggest.
Thanks
Aditya Roushan

SolMan 7.1: SAP_BASIS does not fulfill the prerequisites

Hello experts,
in the phase "configuration of managed systems", step 2 I get the following error:
Error
SAP_BASIS does not fulfill the prerequisites (installed: 700 SP0000, expected: 700 SP0001)
Action
Please check SAP Note 1483508 for more information
Check Context
Managed systems prerequisite | ABAP Managed system prerequisite | SYSTEM =ET4~ABAP
Info
SAP_BASIS fulfills the prerequisites (702 SP0000)
Check Context
Managed systems prerequisite | ABAP Managed system prerequisite | SYSTEM =ET4~ABAP
Info
The definition of Technical System 'ET4~ABAP' is correct
Check Context
Managed systems definition | Managed System Definition Status | SYSTEM =ET4~ABAP
The note doesn't help me at all. I have the following releases:
Managed system: SAP_BASIS 702 0007 SAPKB70207
Solman: SAP_BASIS 702 0008 SAPKB70208
No one of both systems is SAP_BASIS 700, does anybody have an idea how to solve this?
Note 1572183 - Authorizations for SAP Solution Manager RFC user is already implemented in managed system.
Thank you and best regards, Basti

Hi Basti,
May be the issue with the system details not update in the solution manager LMDB and SMSY.
Better goto the solution manager system -> LMDB -> Resynchronize the SLD detaisl for ET4 system. so it will fetch the latest details from SLD( also check in the SLD, ET4 having latest update and check the last update details) and update in the ET4 system, also check the job LMDB* . it will fetch all the details and updated in LMDB.
After syn also system is not update, try the below option
Goto SE38 and run the report RLMDB_SYNC_TECHNICAL_SYSTEM.and follow the below document
https://help.sap.com/saphelp_sm71_sp05/helpdata/en/f6/a41e0402664451b9c4640ff4513527/content.htm
After ET4 system update, run the managed system setup it will solve the issue
Rg,
Karthik

Manager System does not fulfill the Diagnostics prerequisites

Hi experts,
I am in Solution Manager 7.1 SP11, step Managed Systems Configuration .The Managed system is one Java application server (Portal).
In step 2: Check Prerequisites I am getting error:
Managed system <SID>~JAVA does not fulfill the Diagnostics prerequisites
ERROR->Cannot get Software Components installed on Solution Manager
More info->Method call failed; the method GET_SC_67838200100200019681 of the class MANAGED_PREREQ_CHECK does not exist
Action->Check the current SP Software Component list on SAP Service Marketplace: http://service.sap.com/sap/bc/bsp/spn/swdc/sps/default.htm?pvnr=01200314690900002795
Check Context->Managed systems prerequisite | Diagnostics prerequisite Java | SYSTEM =<SID>~JAVA
detail
No More Info for this problem!
Who can give some advise to solve this ?
Regards
Leo

Hi Leo
Check this note & this should help this issue
, 2001501 - Cannot get Software Components installed on Solution Manager
Looks like known issue, ID 67838200100200019681 shows relevant.
regards
Swami

CRM service order does not create purchase requisition

Dear experts,
CRM 5.0
We have a scenario where saving a released service order should create a purchase requisition in ECC and update the document flow. I have performed the following steps and still the PR isn't getting created.
1. Configuration in CRM and ECC for integration of service processes with logistics and maintaining the purchasing document types.
2. Maintaining standard pruchase groups in ECC table V_TMW01
3. Assigning standard purchase org to the plant
4. Making sure correct RFC destination is assigned to the logical system.
Am I by any chance missing some middleware steps as saving the service order does not even trigger anything in the system?
Thanks
Ritwik

Hi Ritwik,
Just check the following activities are maintained or not
1) You have created the subscription in SMOEAC with Site , Replication object and Service Order
     Process type in the criteria value.
2) You have maintained the customizing entry in CRM in spro for the following combination in logiistics
    Integration for Trans.Type Item Cat. Service Organization Org Unit (Service) Log. Scen.
Regards
Pavan.A

Session does not logoff on integrated ITS 700

We have upgraded from 46C / ITS 620 to ERP2005 (ECC60) and are using the integrated ITS.
When you log off the ITS webgui session, if you leave the browser open and enter the webgui URL once more (http://<host>/sap/bc/gui/sap/its/webgui), the logon screen is bypassed and another person could pick up the original users session.
The ~usertimeout parameter from ITS 620 does not have any effect.
Does anyone know the correct parameter to set to overcome this?

Hello John
There seems to be some sort of SSO involved.
~usertimeout only helps with the original ITS SSO cookie named MYSAPSSO.
With ticket logon ~usertimeout already did not have any effect.
With the Integrated ITS the MYSAPSSO cookie is not available anymore.
In your case the problem is either with the SSO Logon Ticket or with HTTP Basic Authentication. If it is the ticket logon (e.g. via EP) then the user would have to log off from EP to delete the SSO Logon ticket.
If it is the HTTP Basic Authentication then the browser has to be closed as there is no other way to remove the authentication otherwise.
<b>Possible Solution</b>:
You might want to check and change the Logon Procedure in SICF for the webgui service. You should be able to make SAP Authentication the standard:
you find more details at <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e0/73f34026d70b06e10000000a155106/frameset.htm">SAP Online Help</a>
best regards
Gerd

LabVIEW 8 does not close ref's the same as LabVIEW 7!?!

Hello!
I have been struggling with a difference between LabVIEW 7 and 8 in how the Close Reference functions for Active X objects. In order to fully understand the problem, let me first explain the process of how I got here.
I have an application in beta testing and we noticed a huge memory leak in LabVIEW 8, 8.2. I took a snippet of the code and worked on it a while to reduce the memory leak. I was closing every reference and could not explain it so I wrote the same code in VB and saw no memory leaks. I implemented the same code in LabVIEW 8 and still saw a memory leak. The code opens a graph control from a third party vendor and draws it. Each time the graph is drawn in LabVIEW 8, it costs about 30-40k. We have 8 graphs in our application bringing each iteration to 240-320k. The users are going to be reviewing between 96-384 samples in one sitting but we have no control over when the program quits. 384 samples reviewed in the graphs is 92,160k as a minimum. I was frustrated and about to send it to the thrid party vendor, AB Sciex, but they only had LabVIEW 7.1. So I converted it back to 8.0 and then to 7.1.1. I ran the code in 7.1.1 and there were little to no memory leaks! I even tried it in LabVIEW 7.0 and it worked the same as 7.1.1.
I monitored the memory of LabVIEW through the task monitor in Windows XP. I have tried it on a few XP machines and a 2000 machine and same answer on all. I also built a Task Monitor tool using .NET to graph the memory of the LabVIEW process. I verified that running the .NET example as an exe and the windows based task monitor behave the same and produce the same result.
So, I have an example that works in VB, LabVIEW 7.0 and 7.1.1. but 8.0 and 8.2 cause memory leaks! I have tried numerous things to force the removal of the references but nothing seems to have worked. Here is a list of things I have tried in LabVIEW 8 to force the closing of the reference:
- Error detection after each property node/invoke node to catch any errors for the mem leaks
- Deallocate Memory function is placed in every VI.
- All VIs running in the User interface thread to avoid thread collision, also tried running in the IO thread.
- Debugging turned off on all VIs.
- All references converted to controls (instead of constants) and made not visible on the front panel. I hoped this would not force an update to the FP or memory.
- All Open and Close references are in seperate SubVIs for memory deallocation.
- Time delay of 3 seconds in between each property node/invoke node to make sure deallocation can occur.
- Forced recompile and saved all. Rebooted in between all attempts and changes above.
- Put all code and ocx control in a SubVI and called it through the main program as a SubPanel. I can see memory deallocation, but its not a full deallocation. It deallocates about 40k, but the load eats up 80-90k. VB and LV7 deallocate about 20k, increase 55k for the load, then drops 30k after the load and results in about 3-4k in memory for LabVIEW.
I am hoping through this post that someone can help me out with understanding why LabVIEW 8 would handle closing references differently than that of LabVIEW 7. I feel as though i have attempted nearly everything I can to get LabVIEW 8 to work with this example. I have an open reference (ha thats funny) with NI to look at this but wanted to see if any of you had any thoughts? Thanks!
Try it out for yourself here please....
LabVIEW 7.1 Code (1.1Mb)
LabVIEW 8.2 Code (1.1Mb)
Third Party program(77MB)
Memory graphs between 7 and 8 (50k)
Memory Monitor Tool 8.2exe (700k)
Kevin Shirey
PVI Systems Inc.
Certified LabVIEW Developer

Thanks for the reply,
On the first issue, I believe this made sense as it made no difference, but was a recomendation from NI so I tried it.
On the second issue, I just put in a close ref on the input to the Variant to Data function. This ensures that the reference being passed iin will be empty. The Variant to Data function only creates a new instance of the type of reference being passed in. At this point in the code, the reference has already been closed from a previous VI and I am only using it as a type, as I know it doesn't replace the reference. This was a good check though and looked at all my other variant to data functions just in case but still the same results in LV82.
Third thing is that I tried the profiling tools but it didn't offer a way to track active x data or the memory leak at all. They offered me how much average memory and max they used.
thanks on the fourth. I put in some extra error dialogs now there in case something does happen.
As far as the error detection VIs, they work very well for what I need them for. I like to put in unique error tags in each VI. So long as the error check VIs are in place after each routine, I know exactly where the error occurs because of the error code. So when an error occurs, a dialog box comes up with the LabVIEW error code, VI path and unique error code. It also provides an option to debug which is very cool. It will open the vi with the error and pause it. Then open the block diagram and turn on the light bulb and wait for you to unpause it. This lets you see exactly where the error happened so you can come back to it. It also can record it to a log file or ignore all errors of this type. There is still some things I need to do to it, but its been a work in progress over the years.
What boggles my mind is that the code has no memory leak in LabVIEW 7, 7.1 but has a loss of 40-50k each iteration i LabVIEW 8,8.2. If you have any other suggestions, I am certainly open to trying them.
I am currently investigating a subpanel option to encapsulate all the active x code in another VI and calling it dynamically. Its too early to tell how much this will change things, but I believe the memory leak is because the ocx control of the graph on the main panel is not being released because the main VI never goes idle. If this is true, then the ocx control will be forced to close and deallocate memory because of the dynamic call. When I have the results, I will post em.
Thanks!!
Kevin Shirey
PVI Systems Inc.
Certified LabVIEW Developer

I would like find out how to recommend an app for the ipad. I have tried to use it exclusively but it just does not fulfill all of my needs making me go back to the PC. I want an app tha that will sync calender, notes, and tasks with outlook automatically

I need an app that will display my calender month view, and todays tasks on the same page and sync to outlook automatically. Also my company has a network drive on the cloud that i would like for my work docments to sync to. Can this work?

No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

CRM 2013: Iframe does not display the url set in onform load event with setSrc. How to make this work?

I have a situation we need to display a url in Iframe when a form is loading. the url is set in code with setSrc, or updated the query string value. this worked in crm 2004 not any more in 2013. MSDN states the below to avoid in OnLoad event. what
is the best way to handle this situation? Searched web people recommend using setInterval which i dont want to use.
Any help on this issue is appreciated.
https://msdn.microsoft.com/en-us/library/gg328034(v=crm.6).aspx
Avoid using the OnLoad Event. IFRAMES and web resources load asynchronously and the frame may not have finished loading before the Onload event script finishes. This can cause the src property of the IFRAME or web resource
you have changed to be overwritten by the default value of the IFRAME or web resource URL property.

Thank you for you reply. this URL you send uses window.setInterval which i am not comfortable using it. we need to call clearInterval(),
if not the IFrame refresh every second.
function SetURL()
if(Xrm.Page.ui.controls.get("IFRAME_ActivitySmmary")!=null)
Xrm.Page.ui.controls.get("IFRAME_ActivitySmmary").setSrc(reportUrl + "&id="+ customerId);
Xrm.Page.ui.controls.get("IFRAME_ActivitySmmary").setVisible(true);
else
{ window.setInterval("SetURL()",1000);}

PM_PARTNER_UPDATE change does not get reflected in CRM

Hi,
I'm using FM BAPI_GOODSMVT_CREATE to create a goods receipt. This function module calls a BAdi MB_DOCUMENT_BADI where I coded the method MB_DOCUMENT_UPDATE to update equipments. The change that I need to do is to delete a partner(sold-to) on the equipment. I'm using PM_PARTNER_UPDATE to update the equipment. I was able to do it successfully. But the issue is, we have CRM5.0 and the change needs to be reflected back on the Iobject in CRM. This does not happen when an equipment is changed in my code. However, if I go change the equipment in IE02 the change replicates.
Here is my code,
LOOP AT i_partinfo INTO wa_partinfo.
                          CLEAR wa_ihpa.
                          wa_ihpa-objnr = l_objnr.
                          wa_ihpa-parvw = c_soldto.
                          wa_ihpa-obtyp = c_obtyp .
                          wa_ihpa-updkz = c_delete.
                          wa_ihpa-counter = wa_partinfo-counter.
                          wa_ihpa-parnr   = wa_partinfo-parnr.
                          APPEND wa_ihpa TO i_ihpa.
                          CLEAR wa_partinfo.
                        ENDLOOP.
                        IF NOT i_ihpa[] IS INITIAL.
*Delete Sold to Partner function
                          CALL FUNCTION 'PM_PARTNER_UPDATE'
                            TABLES
                              fxihpa = i_ihpa[].
                        ENDIF.
Thanks in Advance.

Hello,
i have at the moment exactly the same issue with PM_PARTNER_UPDATE.
What was your solution to have a BDOC in the end?
Thank you
Best regards
Manfred

Latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress

latest update of Muse is not installing on several tries,installation gets stuck at 43% and shows '' waiting'' at the ''Extracting'' stage for 7-8 hours after which it does not progress.

Refer to EX11....
Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

Err : crm :- nfoObject 0CRMCC_CAT does not fulfill ref. integrity

Similar Messages

Maybe you are looking for