Err:INF - access to the deski reports by InfoView

Hi,
If user do not have rights to the deski application,
when trying to view the report deski by InfoView - receives an error ERR:INF.
When you get right to the application deski this is ok.
I can not find a solution to the problem.
regards
Krys
PS.
BOXI R2 SP4, Win2003, Apache/Tomcat
Edited by: Krzysztof Nowicki on Nov 3, 2009 10:31 AM

We had a similar problem when opening a deskI report with the pdf-viewer. It was solved by the following:
DesktopIntelligenceProcessingServer : at the end of the textbox Command Line Parameters, change -allowSilentRefresh false in -allowSilentRefresh true
DesktopIntelligenceCacheServer : at the end of the textbox Command Line Parameters, change -allowSilentRefresh false in -allowSilentRefresh true

Similar Messages

(Error RFC 00101) (Error: INF) Large DeskI reports in Infoview.

Hi,
I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
Please advice.
Regards,
Hitesh

Hi Hitestwar,
Try these notes as well
1363743 - '(DA0005)... no default driver specified state: IM002' and 'RFC 00101 Error INF' errors when refreshing a deskI report in InfoView
1202263 - Error: "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
1336210 - when refreshing Desktop Intelligence report in InfoView "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
1423194 - "No Server was available to process the request. Please try again later. (Error: RFC 00101) (Error: INF)" when refreshing a DeskI document in InfoView
1200315 - No server was available to process the request.Please try again later(Error:RFC 00101)(Error:INF)
You can do another thing in the "Help & Support" section on the http://service.sap.com/support/ search for "Error RFC 00101" you will get more references to this issue.
Or try to set logs on the server and check what is happening.
Thanks,
Vivek

Large DeskI report in Infoview

Hi,
I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
Please advice.
Regards,
Hitesh

Hi Hitesh,
Following information might help you to resolve the issue.
Issue might be related to timeouts on the connection server.
                                                                                Please login into CMC and go Home>servers , locate Input and Output File servers and modify timeout of each to be 60 minutes. Default is 10 mins
This 10min default value can be modified in the registry as well:
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suit 11.5\File Server\Instances\input.<machine name>
There is a registry key called u201CServerMaxIdleTimeu201D. Modify it and change the decimal value to 90 (default is 10, max is 90).
After this change is made, please restart CMS and FRS servers and test same again. Please let me know the results.
Regards,
Sarbhjeet Kaur

DeskI report from Infoview - doc.zabo_fc

Post Author: nagh
CA Forum: Administration
In BO XIR2, I tried to edit / create a DeskI report from Infoview on a PC, where no DeskI is installed. Then it prompted me to download a file doc.zabo_fc. I downloaded the file; but even then I could not create / edit a report. So is it correct that, even if we invoke Deski through Infoview (to create/edit a report), we should have a local installation of the DeskI ?? Please clarify.

Hi nagh,
Thats right. You need to have DeskI Client locally installed on your machine for the create/edit option from Infoview for deski reports. This is the difference from the earlier 6.5.
Hope this helps,
Rahul

WIS 10901 error while running WEBI Report but no error in the DESKI report

Hi,
Can anyone please help me to resolve this issue.
we have recently migrated BOXIR2 - BOXI3.1. many of the reports are from SQL Server and Oracle databases.
Oracle Database connection universe reports error:
i'm getting WIS 10901 error while running WEBI report for some particular objects not for all the objects but the same time i could able to pull the same object in the DESKI.
those particular objects having lenthy data's for ex:100 bytes. but i tried same 100bytes some other objects refreshing fine and displaying results.
i don't know where we ar missing.
SQL Server Connection universe reports:
These reports are giving mismatched results from the original but the callculation are done by the reporter side by creating variables. other than that there are no issues with these reports.
Please we are struggling lot on these issues, can anyone please help us.

Hi,
For your issue 2 check whether any filters used in XI R2 are missing in XI R3. As during migration some filetrs might be missed. To check this in slice and dice panel in both bo versions.
Cheers,
Suresh Aluri.

Https: access to the SQL report SQL2012

Hi,
I just successfully bind the https to the SQL reporting, however, I cannot access the report Manager or reports thereafter although I am sure I provide the correct user name/password (even tried Administrator), after 3 attampts, a blank page is shown...
Please help on how to fix it...
Event log also thrown out the error message .. (event id 110)
The value for UrlRoot in RSReportServer.config is not valid. The default value will be used instead.

-------Details--------
System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation
procedure.
   at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
   at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Net.TlsStream.CallProcessAuthentication(Object state)
   at System.Threading.ExecutionContext.runTryCode(Object userData)
   at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.ConnectStream.WriteHeaders(Boolean async)
   --- End of inner exception stack trace ---
   at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
   at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetWebResponse(WebRequest request)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.SqlServer.ReportingServices2010.ReportingService2010.ListItemTypes()
   at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.<ListItemTypes>b__10f()
   at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
   at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.ListItemTypes()
   at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
   at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel()
   at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
appdomainmanager!ReportManager_0-1!c30!03/11/2015-16:43:25:: e ERROR: Remote certificate error RemoteCertificateNameMismatch encountered for url
https://aaa.xxx.yyy/ReportServer_SQLEXPRESS/ReportService2010.asmx.
ui!ReportManager_0-1!c30!03/11/2015-16:43:25:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!WindowsService_0!748!03/11/2015-16:44:32:: i INFO: Call to CleanBatch()
library!WindowsService_0!748!03/11/2015-16:44:32:: i INFO: Cleaned 0 batch records, 0 policies, 0 sessions, 0 cache entries, 0 snapshots, 0 chunks, 0 running jobs, 0 persisted streams, 0 segments, 0 segment mappings, 0 edit sessions.
library!WindowsService_0!748!03/11/2015-16:44:32:: i INFO: Call to CleanBatch() ends
Indeed, this is a testing VM that I P2V from the live server which domain name is aaa.xxx.yyy but I already changed the host file and now I accessing this VM is using
https://project.bbb.ccc/. Not sure why it still hardcoded as aaa.xxx.yyy.
Would this generated the problem...

Restricting Access to the Certain Reporting Components

Hello Gurus!
I would like to restrict the user's access to the following:
1.) The INFORMATION Tab on the Bex Ad Hoc Query
2.) The INFORMATION BROADCASTING Tab
3.) The Exceptions and Conditions Button
4.) The Export To CSV Button
Is that even possible? If it is possible, can some kind soul out there be good enough to tell me how to do this please?
Thank you very much,
Philips

These are all on the 0ADHOC query template. You can just create a copy of this template and modify it to meet your requirements in the Web Application Designer, then assign the new template to be your default template.
Hope this helps...
Bob

Error while scheduling DESKI report in infoview

I m scheduling a DESKI report to users enterprise inbox from infoview using a server group. This server group has DesktopIntelligence Job server, Destination Job server, Adaptive Job server and Program Job servers and all these servers are running.
When I schedule the report to boldusers enterprise inboxbold it get failed and shows this error message
bolddestination DLL disabled. []: [CrystalEnterprise.Smtp] bold
I m wondering what has to be enabled for scheduling a report to infoview's own inbox.

Abhilash
You are correct that it shows all the prompts but only when we run the report either directly from the CR Designer or via View on Demand in Infoview/CMC.
But if I try to schedule an instance of this report, I am getting a check box in the parameter section which says "Show unused parameters" to see this dyanamic prompt. And When I check that box in Infoview still I am not able to select any value for this prompt as it's greyed out.
Hope I am able to explain my query to you.
Also attached a screen shot of the scenario for your reference.

Red Blue issue with published DeskI Report in InfoView

Hi everyone,
i'm expieriencing a strange behaviour with my published DeskI Reports.
I'm using logos in my report and they work just fine... in my full client. As soon as I publish them to InfoView and open them up in the browser, then somehow the color red and blue interchange. Red becomes blue and vice versa...
My System consists of:
BOE R 3.1 SP2
Win Server 2008
DeskI and WebI
Has anyone expirienced the same issues?
Thanks and kr,
Nils

Hi Stratos,
so far everything is just fine. Hope you are doing great too.
my IE version is: 7.0.5730.13
Tomcat version: 5.5.20
If I click on the logos in InfoView, nothing happens.
I tested 3 different ways to implement them:
1) via link; pictures shows up, but again with the red blue issue
2) as an object; pictures shows up; also w/ the red blue issue
3) inserted a cell, and pasted the picture in it, pictures shows up; also w/ the red blue issue
The strange thing is, that this issue only appears in the browser.
Thanks,
Nils

Unable to run Store Procedure based deski report in Infoview

Hi All,
I have a Deski report which is created using Store Procedure. I am able to run report in Full Client Deski. But I am unable to run / schedule same report thorough infoview.
More details about report
- Report uses 3 store procedures. When I ran report in infovew I get error message as "SP2 Dataprovider did not refresh properly". -- SP2 is Dataprovider name.
- Same report I am able to run in Dev environment. After migration to Model, report fails to run in model infoview.
- I am able to Run report only for 1st. When I refresh and run with same parameter report shows error.
Any input will be great help.
Thanks,
NV

Hi,
Could you please test the following solutions to resolve the issue.
Solution1:
Test the issue by inserting the following parameter in .SBO file.
<Parameter Name="Force SQLExecute">Always</Parameter> .
Solution2
Just put SET NOCOUNT OFF in the end of the stored procedure SQL.
If the above doesnu2019t works then please try the following solution.
Solution3
Make the new connection from the scratch using ODBC connection and test the issue.
I hope this will help you.
Regards,
Sarbhjeet Kaur

How Can I Schedule a Deski Report in Infoview that has a VBA Macro

Hi experts,
i've made a report that has a vba Macro. I published it in infoview. If I launch it manually (clicking on the refresh button) the macro works normaly. If I schedule it the macro doesn't work.
What can I do?
Is it possible to make a program that simulate the opening and click on the refresh button?
Or i there is another solution?
Here is my Macro:
Private Sub Document_AfterRefresh()
Dim filtervar As Variant
Dim filterText, Filter As Long
Dim DocName, NewName As String
Dim Pathing, TodaysDate As String
Dim folderName As String
TodaysDate = Format(Date, "DDMMYYYY")
Pathing = "
Ktsdwh0\c$\OutputBO\"
DocName = ThisDocument.Name
filterText = "Dpre Cod Produttore"
filtervar = ThisDocument.Evaluate("=<" & filterText & ">", boUniqueValues)
For Each sepval In filtervar
    Filter = sepval
    For n = 1 To ThisDocument.Reports.Count
        Call ThisDocument.Reports(n).AddComplexFilter(filterText, "=<" & filterText & "> = " & Filter)
        ThisDocument.Reports(n).ForceCompute
    Next n
        MkDir (Pathing & Filter & "\")
        NewName = Pathing & Filter & "\" & Filter & "-" & TodaysDate & "-" & DocName   'for Prova_Prod.rep
'        NewName = Pathing & Filter & "-" & TodaysDate & "-" & DocName   'for Prova_Prod.rep
        ThisDocument.ExportAsPDF (NewName)           'to Save as PDF
Next
    For n = 1 To ThisDocument.Reports.Count
      Call ActiveReport.AddComplexFilter(filterText, "=<" & filterText & "> = <" & filterText & ">")
        ' To delete a Complex Filter, you set it equal to itself...
      ActiveReport.ForceCompute
    Next n
End Sub
Please Help!
Best regards
Camillo

Hi Philippe,
If you are using Windows 2003 with SP2 then it might be the issue as already logged for BOXIR2.
You can test the issue by using only Windows 2003 without SP2.
In case your operating system is only windows 2003 then following information and code might be helpful for you to resolve the issue.
There are a number of things to check when setting up a macro to work through Infoview or scheduled. The first thing is that the macro needs to be triggered to run. This is done by putting a call to the macro in the Document_BeforeRefresh or the Document_AfterRefresh event handler.
The report server and job server are designed to process one report at a time. Through a macro it is possible to open more than one report, and do various processing with those additional reports. Since the report and job servers are not designed to process more than one report, your macro should not open an additional report.
The fact that only one report is processed at a time also affects the syntax you should use when referring to a document or report object. In the DeskI client you can use the ThisDocument object to refer to the report which is running the macro. You can also use the ActiveDocument object to refer to the report that is currently displayed. Most of the time these two objects will point to the same report. When the report server or job server process a report there would never be the possibility for a different report to be active, so the ActiveDocument object does not exist. This also applies to the ActiveReport object. Instead of using ActiveDocument your macro code should use the ThisDocument object. Instead of using the ActiveReport object you should use ThisDocument.Reports.Item(1) to refer to this first report tab in a report.
These items are the most common issues that will cause a macro not to run through Infoview or when scheduled. The best way to debug a macro which is not working in either of those places is to include code which will log the macro's progress to a file. This makes it easy to determine exactly which line of code is causing issues so that it can potentially be corrected.
#Region u201CWeb Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
End Sub
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim myInfoStore As InfoStore
Dim myEnterpriseSession As EnterpriseSession
myInfoStore = CType(Session("InfoStore"), InfoStore)
myEnterpriseSession = CType(Session("EnterpriseSession"), EnterpriseSession)
Dim DOCUMENT_NAME As String = "document_name"
Dim query As String = "Select SI_ID, SI_NAME, SI_SUBJECT, " _
& "SI_COMMENTS, SI_OWNER From CI_INFOOBJECTS Where SI_KIND = 'FullClient' " _
& "AND SI_INSTANCE=0 AND SI_NAME='" + DOCUMENT_NAME + "'"
Dim myInfoObjects As InfoObjects = myInfoStore.Query(query)
Dim myInfoObject As InfoObject = myInfoObjects(1)
Dim myDeskiDoc As FullClient = CType(myInfoObject, FullClient)
Dim mySchedulingInfo As SchedulingInfo = myDeskiDoc.SchedulingInfo
mySchedulingInfo.Type = CeScheduleType.ceScheduleTypeOnce
mySchedulingInfo.RightNow = True
Dim myFullClientFormatOptions As FullClientFormatOptions = myDeskiDoc.FullClientFormatOptions
myFullClientFormatOptions.Format = BusinessObjects.Enterprise.Desktop.CeFullClientFormat.ceFullClientFormatFullClient
myInfoStore.Schedule(myInfoObjects)
End Sub
End Class
I hope this will help you.
Regards,
Sarbhjeet Kaur

Database Connector Error : when refreshing the crystal report in Infoview

Hi,
I've created a crystal report on SAP R/3 tables and the report is refreshing fine in my local system. But however when I publish the report to the BOE, and when I try to refresh the report it gives the error:
Error in File <file name>: Database Connector Error. I'm using Crystal reports 2008 and the BOE is XI 3.1.
How can I solve this?
Thanks,
Sanjay

Hey folks,
i suppose we are facing the same error. But where do i check if the key for the server-side integration kit has expired? There is no explicit key in our CMC.
We use BOE XI 3.1.
Thanks in advance!

DeskI report refreshable on the web

I am attempting to make a DeskI report available on the web. That part was easy, i saved as HTML, and was able to view it on a web page. But we need a step further, i need to be able to make this report refreshable, it has 4 prompts. We want the user to be able to enter info into prompts and get the report. I know this can be done, but cannot figure out why i can't make it work, any help is appreciated.

When saving the Deski report as HTML set the "Automatic Reload Every"
The browser reloads the document according to the frequency specified in the box, which ensures that the HTML document is kept up-to-date with changes made to the original document in BusinessObjects. This is similar to the document refresh feature.

Row Level Restrictions on DeskI Report not working under InfoView

When running/refreshing DesktopIntelligence XI r3 (Full Client) reports under InfoView, the row-level restrictions applied in the universe are not being included in the SQL (additional filtering is NOT happening). However, if a user creates a report using the same universe in WebIntelligence or if the user runs the same report in DesktopIntelligence, the row-level restrictions are working.
It strikes me that the problem has to do with security rights granted (or not granted), but I can't figure out which settings would allow the proper running of a DeskI report under InfoView.
Thanks for any assistance rendered!

Mike,
Do people connect to Infoview and Deski using the same authentication method and the same username?
How does this compare to how your data restrictions are configured?
Are you using @Variable('BOUSER') restrictions? Have you taken domain into account e.g. "Domain\UserName" vs "UserName"?

Password is lost when I save the Crystal Report

We use Crystal Reports v. 11.5.3.417, and our users access the crystal Reports using InfoView (Web Portal)
We store the username and password inside the different Repor so the end-users of these reports don't have to know our database passwords in order to run the reports. (Oracle DB)
We have 2 problems with our Crystal Reports
1) Every time I change and the Save a report, the Password is lost, and I have to remember to go into the "Manage Object" and Process->Database and enter it again. It's really annoying to have to remember this every time we change a report.. Is there an option somewhere to avoid this?
2) The password and username are occationly failing. When the users (accessing Crystal Reports through the Web Portal / Infoview) get an error message "Incorrect logon parameters..." The funny thing (actually not that funny) is that if I try to open the report like 10-15 times, just by clicking on the Crystal Report in the Infoview, it usually starts to work again. Some times after 5 clickes, and other times after 10-15 clicks. Its just not logical. Also when it starts working in my web-browser, it also start to work on our users browser as well.
Every week I have to tell a couple of users to try like 10-15 times, but its not that funny to say this to a user.

Hi Roy Ingar Hansen,
If you think not to provide the password for your End user then we can do that go into the "Manage Object" and Process->Database enter the password and Enable the option in :
When viewing report:
Use same database logon as when report is run.
For the first time you need to enter the logon credentials and enable the option and click on update.
It wont prompt for the password and it will not show password to your user's.
If you have problems with Original database logon , then try with Custom database logon and update the option.
Try with this...
Regards,
Naveen.

Err:INF - access to the deski reports by InfoView

Similar Messages

Maybe you are looking for