Err:Internal Job Queue full for synchronous processing of print requests

Hi,
We are getting a lot of errors in system log with the
error :
Internal Job Queue full for synchronous processing of print requests.
User :SAPSYS
MNO:FBU.
When we check the document in syslog it states it can be solved by reducing the print load or increasing performance or if there is a connection problem to host spooler , by improving the transfer of data to host spooler..
But not by increasing the no of spool workprocess..
I think any of the one stated cannot be implemented ..
Pls provide your valuable answers and if any of the above can be implemented from your end..
Regds,
Satyanarayana N

Hi Vamshi,
Thanks for your response but would also like to confirm how we can say that spool queue is full and what may be the Max size of spool queue..
When we say Internal queue is full does it mean spool queue...
And also when I run the TEmse consistency check it is giving some errors..
When I check Spool requests there are some waiting process,but when I check Output requests there are only 1 or 2..
Please provide me your valuable solution regd this..
Regds,
Satyanarayana N.
Regds,
Satyanarayana N.

Similar Messages

FBU Internal Job Queue Full for Synchronous Processing of Print Requests

Hello All,
We are getting a lot of errors in system log (SM21) with the
Error : FBU Internal Job Queue Full for Synchronous Processing of Print Requests
User :SAPSYS
MNO:FBU
=============================================================
Documentation for system log message FB U :
If a spool server is to process output requests in the order they were
created using multiple work processes, the processing of requests for a
particular device can only run on one work process. To do this an
internal queue (limited size) is used.
If too many requests are created for this device too quickly, the work
process may get overloaded. This is recognized when, as in this case,
the internal queue is exhausted.
This can only be solved by reducing the print load or increasing
processor performance or, if there is a connection problem to the host
spooler, by improving the transfer of data to the host spooler.
Increasing the number of spool work processes will not help, as
requests for one device can only be processed by one work process. If
processing in order of creation is not required, sequential request
processing can be deactivated (second page of device configuration in
Transaction SPAD). This allows several work processes to process
requests from the same device thus alleviating the bottleneck.
Enlarging the internal queue will only help if the overload is
temporary. If the overload is constant, a larger queue will eventually
also be overloaded.
===========================================================
Can you please tell me how to proceed.
Best Regards,
Pratyusha

Solution is here:
412065 - Incorrect output sequence of output requests
Reason and Prerequisites
The following messages appear in the developer trace (dev_trc) of the SPO processes or in the syslog:
S *** ERROR => overflow of internal job queue [rspowunx.c 788]
Syslog Message FBU:
Internal job queue for synchronous request processing of output requests full
The "request processing sequence compliance" on a spool server with several SPO processes only works provided the server-internal job queue (see Note 118057) does not overflow. The size of this request queue is prepared using the rspo/global_shm/job_list profile parameter. The default value is 50 requests. However, if more output requests arrive for the spool server than can be processed (and the internal request queue is full as a result), more SPO processes are used to process the requests (in parallel), and the output sequence of the requests is no longer guaranteed.
Solution
Increase the rspo/global_shm/job_list profile parameter to a much larger value. Unfortunately, the value actually required cannot be found by "trial and error" because this queue contains all the incoming output requests on a spool server, not just the "sequence compliant" requests. A practical lower limit for this value represents the maximum sequence-compliant output requests for the above generated output device. If, for example, 1000 documents that should be output in sequence are issued from an application program to an output device, the queue must be able to hold 1000 entries so that it does not overflow if the SPO process processes the requests at a maximum low-speed.

Spool Error - Errors occurred processing this print request

Hi,
      I have a problem printing documents through spool.
1. I run a form from Form Builder, execute and select to print from spool
2. In SP02, I select the spool request created and Select Direct Printing.
Spool request Status is changed to error and following is the error log.
I get this for all print requests from spool. When I print these documents directly, I have no problem. I understand there is some problem with the spool server but do not know what it is.
I also observed that when the spool access method is G - I have no problems in printing.
Printer: HP HP laserJet PS (2430)
Host Spool Access Method: L: Print Locally Using LP/LPR.
Device Class: Standard Printer.
SAP NW 2004s SP14
      SAP spool error log
      =====================
Print request processing log
The host spool is reporting errors
Message from host spool:
D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9 is currently being printed
End of message
Command used: print /d:
bs107.platinumdb.com\HP01 D:\usr\sap\BS9\DVEBMGS00\data\000001615100001.BS9
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Most important attributes of spool request
Request number 16151
Request name PBFORM HP01 SMULLAPUDI
Client 800
Owner SMULLAPUDI
Request attributes
Time created   2008050118454600
Remaining life +00007235918
Dispo 1 (Go/Hold) H
Dispo 2 (Keep/Delete)     K
Dispo 3 (Indirect/Direct) D
Default output device HP01
Default no. copies 1
Format G_RAW
Main print request characteristics
Spool request number 16151
Print request number 1
Print request attributes
Time created   2008050118471500
Output device HP01
Format G_RAW
Character converter active when first problem occurred
No information available
I am working on this since 4 days with no solution. Kindly help.
Thank you,
Vasu
Edited by: subbu M on May 2, 2008 11:37 PM

Hi Sri,
Try to setup the printer at OS LEVEL.
then,
If on Windows---use method C.
if not,
use method U and map to your printer queue at OS level.
Hope this resloves this issue.
Reward Pts if useful
Regards,
Malti

Multiple Queue Assignment for Integration Process - PI 7.11

Hi,
I am trying to configure multiple Queues for an Integration Process.
The Integration Process is straight forward, except for a Asynchronous Request Response pattern with correlation. (A asynch send step - immediately followed by a asynchronous receive step with Correlation)
I have done the following
1) In IR set the Queue as Multiple - Content Specific
2) In SWF_INB_CONF transaction reconfigured Multiple Queues - Content Specific without buffering
But when I trigger the message, the message is not at all triggering/entering the Integration Process. The error message is BPE Internal Failure.
But if I reconfigure the IP as One Configurable Queue & "Without Buffering", it is working. But we want multiple queues assigned to this Process.
Thanks in advance.
Regards,
Sudharshan N A

Bjoern, there are blogs/wikis available which should be searched before a question is asked on forum. The information you need is quite basic one and I will therefore lock this thread.
Regards,
Prateek

I want an example for event Process on Value-request in Module Pool

Hi,
I need to populate f4 values for a field in module pool program under POV event.
Can anyone send me the sample code.
Helpful answers will be rewarded .
Thanks and Regards
Aditya

Hi
For F4 Values on Screen:
PROCESS ON VALUE_REQUEST
using module call starting with FIELD i.e FIELD field MODULE module
There are number of function modules that can be used for the purpose, but these
can fullfill the task easily or combination of them.
DYNP_VALUE_READ
F4IF_FIELD_VALUE_REQUEST
F4IF_INT_TABLE_VALUE_REQUEST
POPUP_WITH_TABLE_DISPLAY
DYNP_VALUE_READ
This function module is used to read values in the screen fields. Use of this
FM causes forced transfer of data from screen fields to ABAP fields.
There are 3 exporting parameters
DYNAME = program name = SY-CPROG
DYNUMB = Screen number = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
and one importing TABLE parameter
DYNPFIELDS = Table of TYPE DYNPREAD
The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
to this FM and the values read from the screen will be stored in this table.This
table consists of two fields:
FIELDNAME : Used to pass the name of screen field for which the value is to
be read.
FIELDVALUE : Used to read the value of the field in the screen.
e.g.
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
SCREEN_VALUE-FIELDNAME = 'KUNNR' . * Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. * Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = SCREEN_VALUES.
READ TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.Now the screen value for field KUNNR is in the SCREEN_VALUE-FIELDVALUE and can be used for further processing like using it to fill the internal table to be used as parameter in F4IF_INT_TABLE_VALUE_REQUEST ETC.
F4IF_FIELD_VALUE_REQUEST
This FM is used to display value help or input from ABAP dictionary.We have to pass the name of the structure or table(TABNAME) along with the field name(FIELDNAME) . The selection can be returned to the specified screen field if three
parameters DYNPNR,DYNPPROG,DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
F4IF_INT_TABLE_VALUE_REQUEST
This FM is used to dsiplay values stored in an internal table as input
help.This FM is used to program our own custom help if no such input help
exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = field from int table whose value will be returned
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = internal table whose values will be shown.
RETURN_TAB = internal table of type DDSHRETVAL
EXCEPTIONS
parameter_error = 1
no_values_found = 2
others = 3.
POPUP_WITH_TABLE_DISPLAY
This FM is used to display the contents of an internal table in a popup window.The user can select a row and the index of that is returned in the CHOISE
parameter.The VALUETAB is used to pass the internal table.
A suitable title can be set using TITLETEXT parameter. The starting and end position of the popup can be specified by the parameters STARTPOS_COL / ROW and ENDPOS_ROW / COL .
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL =
ENDPOS_ROW =
STARTPOS_COL =
STARTPOS_ROW =
TITLETEXT = 'title text'
IMPORTING
CHOISE =
TABLES
VALUETAB =
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
e.g.
DATA: w_choice TYPE SY-TABIX.
DATA: BEGIN OF i_values OCCURS 0 WITH HEADER LINE,
values TYPE I,
END OF i_values.
PARAMETRS : id TYPE I.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR id
i_values-values = '0001'.
APPEND i_values.
i_values-values = '0002'.
APPEND i_values.
i_values-values = '0003'.
APPEND i_values.
i_values-values = '0004'.
APPEND i_values.
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL = 40
ENDPOS_ROW = 12
STARTPOS_COL = 20
STARTPOS_ROW = 5
TITLETEXT = 'Select an ID'
IMPORTING
CHOISE = w_choice
TABLES
VALUETAB = i_values
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
CHECK w_choice > 0.
READ TABLE i_values INDEX w_choice....now we can process the selection as it is contained
...in the structure i_values.
Other FM that may be used to provide input help is HELP_START .
Reward points if useful
Regards
Anji

BPEL Pick and Wait activity for Synchronous Process

Hi everyone,
Is it possible to use the pick and wait activity in bpel for recieving the synchronous webservices response .I need to invoke a synchronous webservice and want to use the pick activity onmessage branch to recieve the response of the synchronous webservice. I have tried the pick activity to recieve the response of asynchronous bpel process it is working fine.Now if i want to use the pick activity to recieve synchronous webservice response is it possible ?
If someone can help me in this regard it would be great.
Thanks in Advance.
Regards,
Senthil Kumar.A

that's the thing , you can't
You must create another bpel (sincr ) in front of your asincr(bpel)
the sincr bpel will have a pick activity on the onResult(or onError) message from the asinc bpel. You pass the payload from OnResult to output and voila.
The asincr bpel will have at least 3 operations .
1. operation -
2.onMessage
3.OnResult
(4.OnError )
Be carefull how you put the roles and port types in the wsdl file. The callback must be first.
<portType name="xCallback">
<operation name="OnResult">
<input message="ns1:xResponseMessage"/>
</operation>
<operation name="OnError">
<input message="ns1:xFaultMessage"/>
</operation>
</portType>
<portType name="x">
<operation name="process">
<input message="ns1:xRequestMessage"/>
</operation>
<operation name="OnMessage">
<input message="ns1:xResponseMessage"/>
</operation>
</portType>
<plnk:partnerLinkType name="x">
<plnk:role name="xProvider">
<plnk:portType name="client:xCallback"/>
</plnk:role>
<plnk:role name="xRequester">
<plnk:portType name="client:x"/>
</plnk:role>
</plnk:partnerLinkType>

Is my internal HD too full for recording?

My MBP has a 120 GB HD, and 80 GB is in use. I need to be able to record up to 2 hours at a time, that's about 26 GB of HDV footage. It would just about fit with a little free space left over, but am I better off using an empty external USB drive?

I've done both with success. However, I would prefer to offload some of that 80GB to the external drive to free up space on the internal and thus remove a possible problem (such as cable failure, power failure to the external, who knows what else) from the signal chain.

EH&S WWI for GLM print request processing

Hi all,
we installed EH&S WWI for GLM print request processing scenario, following the note:"1394553", but when we try to print we receive this error from WWI:
Start Function 'WWI_PRINTREQUEST_CREATE'
Initializing parameters
Receiving data from client
   calling RfcGetData returned 0
    receiving data lasted: 0.0 sec.
    Retrieving print request data from RFC interface
    Using Temp Directory E:\WWI\TEMP\BSV100000000000062
   Delete files in E:\WWI\TEMP\BSV100000000000062
    Creating text file E:\WWI\TEMP\BSV100000000000062\r000000000062.val
    Writing data to text file 39 lines, 1009 characters
    Updating print request status from 0 to 1
    [DB time] Writing print request lasted 9 ms
Start processing command 'Create print request' in synchronous mode
Creating print request 000000000062
WwiSapDms::retrieveDocument: RFC error when calling ABAP function moduleRFC connection is not Unicode
WwiSapDms::retrieveDocument: RFC error when calling ABAP function module
key     : RFC_ERROR_SYSTEM_FAILURE
message : See RFC trace file or SAP system log for more details
Reading SBV document IB0120510 from Cache failed
    WwiCacheRead resulted with -1
    Updating print request status from 1 to 5
    [DB time] Writing print request lasted 4 ms
##### Command 'Create print request' finished with status E #####
    Storing ERR file E:\WWI\TEMP\BSV100000000000062\l000000000062.err into DMS succeeded
    22 lines
Sending data to client
   calling RfcSendData returned 0
    sending data lasted: 0.0 sec.
Elapsed time : 0.1 sec.
We don't understand what kind of RFC or what part of customizing we have to check, could you please help us?
Thanks,
Christian

Dear Pugal
we are not using GLM + and I am not sure about the technqiue used there to handle load balancing. Regarding general WWI setup I assume you know this Note: EH&amp;S: Availability and performance of WWI and Expert servers
On the top there is a further SAP Note abvailable which might be of interest. This is referenced here:
http://de.scribd.com/doc/191576739/011000358700000861002013-e
May be check OSS note: 1958655; OSS Note 1155294 is more related to normal WWI stuff; but may be check it as well. May be 1934253 might help better
May be this might help.
C.B.
PS: may be check as well: consolut - EHS_MD_140_01 - EH&amp;S-Management-Server einrichten
The load balancing of synchron WWi servers is donein the "RFC" layer, therefore you have no inffluence here, for asynchron WWI servers you can do a lot to manage the WWI load balancing by using "exits" etc.

Networked OJ 8500 that is extremely slow in job queuing.

We recently installed an OJ 8500 and the job queuing is extremely slow. The printer is networked (wired) and all users have the same problem. We run a combination of XP, Vista and Windows7. We have no problem getting the printer to print. Its just painfully slow. Job to job delays are 30 sec to 1 min. The first job is slow to start. Multiple copies of the same page print with this long delay between pages. The OJ 5400 we had previously did not have this problem. Can this be fixed?

Once the job hits the printer it prints immediately. It's right after you tap Print on the iPad that takes a long time. There is a box that pops up saying that the job is being processed (don't remember the wording exactly). Once the box disappears it also takes a bit of time for the job to hit the printer.
The actual process of the printer printing is normal.
Also, in some cases the iPad won't even see that there is a printer connected to the network even though the printer is powered on, online and the iPad is connected to the home network. Usually a reboot of the printer fixes this problem.
Thanks

Synchronous processing of dat file using Adobe Output Server

Hello everyone
I have a doubt regarding Adobe Output Server. Currently my output server is running as a window service named "Adobe Central Output Server" in my machine referring to executable path E:\Jetform\Central\Control\jfservic.exe. It keeps on running irrespective of whether .dat file is present for further processing or not. In case .dat is there in data folder[location where my code writes into .dat file] it picks it up and does all the processing to give the result in form of Print/Fax. But when there is no .dat file present , still the service keeps on running consuming memory & cpu resource.
Curently my code drops a .dat file in data folder and dont bother about what happens to that .dat file afterwards. Its Adobe Output Server service that is running that keeps on monitoring data folder for any new dat file to process them further.
I want to stop that window service permanently and i wish to change some logic in my code so that as and when my program drops a .dat file in Data folder then i invoke Adobe Output Server or some of its component so that it picks up that dat file and does all the processing to generate Print/Fax and once its done with processing , the execution of Adobe central server ends. And it remains dead till its invoked by the program to process a new dat file.
So basically i was wondering whether there is possibiliy of invocation of Adobe Output Server is available or not for synchronous processing of dat file from the code.
Any suggestions , any ideas , any doubts on it are most welcome.
jaY

i faced the same thing
1- you have to do something in SAP ( i am looking for someone to tell me what )
2- create a job & name it by (ANYNAME_EMAIL)
3- Inside the Job create the following Tasks
a- SAPMERGER A
b- SAPMERGER
c- SAPEMSEND
that's it / AS Simple AS That
Please tell me if you still facing the same problem

High number of LWPs for a process

I have a high number of LWPs created for a process (say 70,000) at times .
I would like to know the reason for such high LWP creation and how do i minimize this.
Pls help

LWPs are only created for a process when it requests it (via system calls).
As an administrator, there's not much you can do to modify the behavior of code at that level. You'd need to examine the source to see why that's occuring.
You could limit resources (like memory), but it may not behave well when it hits the resource limit.
Darren

HP210a print jobs fail over wireless, but can still print Test Diagnostic page over network

Help! I cannot print over the wireless network anymore. When I try, the print job queues up and I get "Error - Printer" message. I can print the Test Diagnostic page just fine over the network. I can also print fine when connecting via USB port. I have the latest firmware. Any ideas?

Hi HP_210a_user,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP 210a printer and not printing over wireless. HP Print and Scan Doctor.
The HP Print and Scan Doctor will help resolve this issue. I would also restart the printer. Unplug wait 1 min plug back in.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Error 472 in job queue process + ORA-472: PMON process terminated with err

Hi,
I've an Oracle Database 11g Release 11.1.0.6.0 - 64bit Production With the Real Application Clusters option.
Yesterday instance on node1 crashed.
This is the extract of alert log:
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195198):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195198/EVODB1_pmon_9297_i195198.trc
Sat Jan 22 16:24:47 2011
Trace dumping is performing id=[cdmp_20110122162447]
Sat Jan 22 16:24:50 2011
Sweep Incident[195198]: completed
Sat Jan 22 16:25:00 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195199):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195199/EVODB1_pmon_9297_i195199.trc
Sat Jan 22 16:25:10 2011
Trace dumping is performing id=[cdmp_20110122162510]
Sat Jan 22 16:25:12 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195200):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195200/EVODB1_pmon_9297_i195200.trc
Sat Jan 22 16:25:23 2011
DBRM (ospid: 9310): terminating the instance due to error 472
Sat Jan 22 16:25:23 2011
System state dump is made for local instance
System State dumped to trace file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_diag_16320.trc
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3724_47445977853072)
Sat Jan 22 16:25:23 2011
SUCCESS: diskgroup ARCHIVELOG was dismounted
Sat Jan 22 16:14:22 2011
DDE: Problem Key 'ORA 600 [17183]' was completely flood controlled (0x6)
Further messages for this problem key will be suppressed for up to 10 minutes
Sat Jan 22 16:15:56 2011
Thread 1 advanced to log sequence 171322
Current log# 18 seq# 171322 mem# 0: +ONLINELOG/evodb/onlinelog/group_18.264.729348055
Sat Jan 22 16:15:56 2011
SUCCESS: diskgroup ARCHIVELOG was mounted
Sat Jan 22 16:16:15 2011
SUCCESS: diskgroup ARCHIVELOG was dismounted
Sat Jan 22 16:20:52 2011
Thread 1 advanced to log sequence 171323
Current log# 12 seq# 171323 mem# 0: +ONLINELOG/evodb/onlinelog/group_12.267.729333861
Sat Jan 22 16:20:53 2011
SUCCESS: diskgroup ARCHIVELOG was mounted
Sat Jan 22 16:21:14 2011
SUCCESS: diskgroup ARCHIVELOG was dismounted
Sat Jan 22 16:24:23 2011
DDE: Problem Key 'ORA 600 [17183]' was completely flood controlled (0x2)
Further messages for this problem key will be suppressed for up to 10 minutes
Sat Jan 22 16:24:38 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195198):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195198/EVODB1_pmon_9297_i195198.trc
Sat Jan 22 16:24:47 2011
Trace dumping is performing id=[cdmp_20110122162447]
Sat Jan 22 16:24:50 2011
Sweep Incident[195198]: completed
Sat Jan 22 16:25:00 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195199):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195199/EVODB1_pmon_9297_i195199.trc
Sat Jan 22 16:25:10 2011
Trace dumping is performing id=[cdmp_20110122162510]
Sat Jan 22 16:25:12 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195200):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195200/EVODB1_pmon_9297_i195200.trc
Sat Jan 22 16:25:23 2011
DBRM (ospid: 9310): terminating the instance due to error 472
Sat Jan 22 16:25:23 2011
System state dump is made for local instance
System State dumped to trace file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_diag_16320.trc
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3724_47445977853072)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3650_47673206152336)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (19709_47962498952336)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3715_47239602621584)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3718_47120460606608)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3646_47899813694608)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3671_47700480982160)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3637_47223057443984)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3695_47109627223184)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3679_47262512999568)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3733_46976527121552)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3667_47474016554128)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3669_47585103858832)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3658_47992462539920)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3654_47736794324112)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3686_47295241862288)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3706_47055349939344)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3630_47331091332240)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3713_47194150415504)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3726_47289949199504)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3677_47842172337296)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (19131_47557370236048)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (27091_47096969530512)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3688_47422639070352)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3652_47944422886544)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3648_47426149817488)
Sat Jan 22 16:25:24 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j005_9360.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J005 ospid (9360_47420959304848)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (18393_47566684101776)
Sat Jan 22 16:25:24 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j003_7054.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J003 ospid (7054_47244451724432)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (19719_47840732109968)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (22184_47575322619024)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (19721_47679094451344)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (30170_47106572815504)
Sat Jan 22 16:25:24 2011
ORA-472 : opidrv aborting process S000 ospid (9367_46990649617552)
Sat Jan 22 16:25:24 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j002_7052.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J002 ospid (7052_47411695402128)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (18493_47469336738960)
Sat Jan 22 16:25:24 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j006_10011.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J006 ospid (10011_47836408102032)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (19714_47958179912848)
Sat Jan 22 16:25:24 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j007_10289.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J007 ospid (10289_47356480347280)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (9076_47765392362640)
Sat Jan 22 16:25:24 2011
ORA-1092 : opitsk aborting process
Sat Jan 22 16:25:25 2011
ORA-1092 : opiodr aborting process unknown ospid (22167_47949919177872)
Sat Jan 22 16:25:25 2011
ORA-1092 : opiodr aborting process unknown ospid (24320_47408077532304)
Sat Jan 22 16:25:25 2011
ORA-1092 : opiodr aborting process unknown ospid (22130_47998542101648)
Sat Jan 22 16:25:25 2011
ORA-472 : opidrv aborting process N000 ospid (14774_47466200525968)
Sat Jan 22 16:25:25 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_q000_14701.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process Q000 ospid (14701_47693688122512)
Sat Jan 22 16:25:25 2011
ORA-1092 : opiodr aborting process unknown ospid (18386_47900707175568)
Sat Jan 22 16:25:25 2011
ORA-1092 : opiodr aborting process unknown ospid (27553_46921398619280)
Sat Jan 22 16:25:26 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j001_7050.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J001 ospid (7050_47290016251024)
Sat Jan 22 16:25:26 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_o001_5297.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process O001 ospid (5297_47702958673040)
Sat Jan 22 16:25:26 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_o000_5277.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process O000 ospid (5277_47599668255888)
Sat Jan 22 16:25:26 2011
ORA-1092 : opiodr aborting process unknown ospid (19745_47560156560528)
Sat Jan 22 16:25:26 2011
ORA-1092 : opiodr aborting process unknown ospid (27044_47388543339664)
Sat Jan 22 16:25:26 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j004_7061.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J004 ospid (7061_47341656689808)
Sat Jan 22 16:25:27 2011
ORA-1092 : opiodr aborting process unknown ospid (14431_47662297960112)
Sat Jan 22 16:25:27 2011
ORA-1092 : opiodr aborting process unknown ospid (14433_47826608635568)
Sat Jan 22 16:25:31 2011
ORA-1092 : opitsk aborting process
Sat Jan 22 16:25:32 2011
License high water mark = 269
Instance terminated by DBRM, pid = 9310
USER (ospid: 10539): terminating the instance
Instance terminated by USER, pid = 10539
Sat Jan 22 16:25:49 2011
Starting ORACLE instance (normal)
This is the trace /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195200/EVODB1_pmon_9297_i195200.trc
(the one regarding the error DBRM (ospid: 9310): terminating the instance due to error 472)
Oracle Database 11g Release 11.1.0.6.0 - 64bit Production
With the Real Application Clusters option
ORACLE_HOME = /u01/app/oracle/product/11.1.0/db1
System name:    Linux
Node name:      dcsrv-evodb01
Release:        2.6.18-164.10.1.el5
Version:        #1 SMP Wed Dec 30 18:35:28 EST 2009
Machine:        x86_64
Instance name: EVODB1
Redo thread mounted by this instance: 1
Oracle process number: 2
Unix process pid: 9297, image: oracle@dcsrv-evodb01 (PMON)
*** 2011-01-22 16:25:12.984
*** SESSION ID:(884.1) 2011-01-22 16:25:12.984
*** CLIENT ID:() 2011-01-22 16:25:12.984
*** SERVICE NAME:(SYS$BACKGROUND) 2011-01-22 16:25:12.984
*** MODULE NAME:() 2011-01-22 16:25:12.984
*** ACTION NAME:() 2011-01-22 16:25:12.984
Dump continued from file: /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
+========= Dump for incident 195200 (ORA 600 [17183]) ========+
----- Beginning of Customized Incident Dump(s) -----
And this is the trace /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j005_9360.trc
(the one regarding the error ORA-00472: PMON process terminated with error)
Trace file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j005_9360.trc
Oracle Database 11g Release 11.1.0.6.0 - 64bit Production
With the Real Application Clusters option
ORACLE_HOME = /u01/app/oracle/product/11.1.0/db1
System name:    Linux
Node name:      dcsrv-evodb01
Release:        2.6.18-164.10.1.el5
Version:        #1 SMP Wed Dec 30 18:35:28 EST 2009
Machine:        x86_64
Instance name: EVODB1
Redo thread mounted by this instance: 1
Oracle process number: 95
Unix process pid: 9360, image: oracle@dcsrv-evodb01 (J005)
*** 2011-01-22 16:25:24.057
*** SESSION ID:(649.45863) 2011-01-22 16:25:24.057
*** CLIENT ID:() 2011-01-22 16:25:24.057
*** SERVICE NAME:(SYS$USERS) 2011-01-22 16:25:24.057
*** MODULE NAME:() 2011-01-22 16:25:24.057
*** ACTION NAME:() 2011-01-22 16:25:24.057
error 472 in job queue process
ORA-00472: PMON process terminated with error
My questions are:
- how can I discover the nature of the ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []?
- what does error 472 in job queue proces mean?
- is it normal the the error 472 in job queue proces crash the instance?
Thanks in advanca for any kind of help!
Samuel

>
how can I discover the nature of the ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []?
>
ORA-00600 should be reported to oracle. Only they know the meaning.
Regards,
- wiZ

Is Job Control required for Full Dataloads in LO Cockpit

Is Job Control required for Full Dataloads in LO Cockpit
Points will assigned for every useful answer.
regards,
AVNEET

No, Job control is required only for delta records
Why?
When you do full update/Initilization of delta, the system directly goes to the setup tables (note that setup tables are filled from applications tables using statistical setup) and gets the data to the data targets. Normally, you go with this option to get all the historical data which is present in the applications tables.
So, when you peformed init, all the historical data till today are moved to the BW system. Now, how are your delta records( records which are created/modified after your init) moved?
It depends on the update option you have selected in the LO cockpit
if you go with Direct Delta : All the delta records are posted directly to the Delta Queue(RSA7). In this case, Job control is not required.
2. If you go with Queue Delta : All the delta records are first posted to Extraction Queue (LBWQ) and from here records are moved to RSA& using Job Control.
3. If you go with Unserialized V3 update : All the delta records are first posted to Update tables (SM13) from there records are moved to RSA7 using again Job control.
So, all the delta records must be moved to RSA7 from where the bw system picks it delta records.
Thanks
Vj

Can not delete job for BW process chain.

I can't kill or cancel this job.
this job status keeping "Killing" during 2 days.
sub-job was completed.
How can I force delete this job?
Job 29006 - CCMS job BI_PROCESS_ODSACTIVAT (GBD/100) Actions
Description CCMS job BI_PROCESS_ODSACTIVAT (GBD/100)
Job Id 29006
Parent Job 29005 - BW Process X0DMMB52_ACTIVATE (GBD/100)
Definition SAP_CcmsJob
Comment This job represents a monitored SAP batch job. The SAP batch job runs under control of the SAP batch system.
Owner Subject Redwood System
Status Killing
Files
Name Size
log 23895 Details u2026
Queue GBD_Queue
Process Server GBD_ProcessServer
Forced Process Server GBD_ProcessServer
Priority 50
Start time Requested: Sep 12, 1:43:19 PM, Actual: Sep 12, 1:43:19 PM (0:00:00:000 difference)
Requested Start Time Type User Set
Next Submit Base Time Sep 12, 1:43:19 PM
Scheduled Start Sep 12, 1:43:19 PM
Run time Sep 12, 1:43:19 PM - Sep 12, 1:43:43 PM (0:00:24 elapsed)
Remote Information
Remote System SAP GBD 100
Remote Status Finished
Remote Id J/RFCUSER/BI_PROCESS_ODSACTIVAT/13430000
Remote Event RSPROCESS
Remote Creation Time Sep 12, 1:43:00 PM
Remote Run Start Sep 12, 1:43:19 PM
Remote Run End Sep 12, 1:43:43 PM
Parameters
Job Definition Parameter In Value Out Value
JOBNAME BI_PROCESS_ODSACTIVAT   Details u2026
JOBCOUNT 13430000   Details u2026
CLIENT 100   Details u2026
SAP_USER_NAME RFCUSER   Details u2026
SHOWLOG Y   Details u2026
SHOWSPOOL Y   Details u2026
DELETE_JOB N   Details u2026
Creation Time Sep 12, 1:44:01 PM
Last Modification Time 9:48:41 PM
Edited by: Park Jeonghwan on Sep 19, 2008 3:02 PM

Hi Park,
From what you describe I am assuming that the you had a BW Process Chain running from CPS and then decided to kill it. This autoamtically created a child job that's supposed to stop the Process Chan in SAP that should have, once complete, updated the parent job from it's 'Killing' status to 'Killed'. Now you find that the BW Process Chain in SAP is/was stopped, the CPS child job has also completed and yet your Process Chain job in CPS still has a 'killing' status. Because it is stuck in this status you cannot do anything with it, i.e. none of the scheduling options in the Redwood Explorer are active.
Assuming the above interpretation is correct then you probably have only one option and that is to force an update in the Repository itself. I also assume you're using either v6.x or v7.x.
To confirm the status of the current job in preparation for the update you can do the following query in the Redwood Shell when logged in as SYSJCS:
select status from rws_job$ where job# = <the job number of the job currently in a 'killing' status>;
This should return 1 row and the value for status should be 'G'.
To update the status you can use the following command from the Redwood Shell when logged in as SYSJCS:
update rws_job$ set status = 'K' where job# = <the job number of the job currently in a 'killing' status>;
To confirm your update was successful before finally committing use the first query again..
select status from rws_job$ where job# = <the job number of the job which previously was in a 'killing' status>;
This should return 1 row and the value for status should be 'K'.
You can now commit the change or rollback if you've made a mistake
commit;
Normally it is not recommended that CPS users modify any of the underlying tables so you may want to check with support that they are ok with you executing this command.
You may also want to check that you have the latest Service Pack for CPS as this may mitigate this kind of issue from appearing again.
Regards,
Simon

Err:Internal Job Queue full for synchronous processing of print requests

Similar Messages

Maybe you are looking for