Err msg: "An error occured" when launcihng Planning

Hi - I just installed Planning ver 3.5 with Websphere 5.1.
The services are running, but when I try to launch the page I get "an error occured". The page that I am suppose to see first is the log on page, but I do not get that. It looks like it is bypassing that and has me automatically logged onto Planning, but then it can't load anything, hence the "an error occured" page.
Not sure where to look first. Any help would be appreciated.
Cindy

Hi David,
Did you try running an input schedule in the apshell? Are you able to send data in apshell?
Please make sure that you all the members are base level members.
Hope this helps.

Similar Messages

Error occurred when delimiting records

Hi Experts,
When I am delimiting IT0008 err is coming
"Error occurred when delimiting records"
How to solve.
Regards,
Tomesh
Edited by: Tomesh Sahu on Jun 16, 2008 5:10 PM

Hi,
You cannot delimit IT0008 due to fact that Time constraint=1. 1 record should always exist in the system even if person is terminated.
IT0008 shoudl not be delimited due to some retroactive calculations if any.
Similar infotype that cannot be delimited are 0000, 0001 and 0002, They shoud always exist in the system even if person is terminated.
Why you not think about action which will change status of employee to something that will not be processed via payroll and when Person is back just Rehire him/her or run another action which will update status to Active.
Regards,
Ani
Edited by: Ani Arsova on Jun 16, 2008 11:52 PM

When opening up Light room 5 i get a msg saying, :an error occurred when attempting to change modules:

when opening up Light room 5 i get a msg saying, :an error occurred when attempting to change modules:

Hi Shakenimages,
Welcome to Adobe Forums
There is a separate Forums regarding Light room, you can post the query there & the experts will reply you on this.
Use the link mentioned below to do so.
Photoshop Lightroom
Let us know if that helps!
Thanks
Garima

Internal error occured when writing

Hi all
I successfully imported an APO planning area into the quality systems, however the same request ends with error 12 in the production system. Landscape is SCM 5.0 sp8 with BI 7.0 sp12. When i checked the import job RDDEXECL (user DDIC), it shows:
Date Time Message text Message class Message no. Message type
07/08/2007 00:02:57 Job started 00 516 S
07/08/2007 00:02:57 Step 001 started (program RDDEXECL, variant , user ID DDIC) 00 550 S
07/08/2007 00:02:57 All DB buffers of application server <server_name> were synchronized PU 170 S
07/08/2007 00:03:17 Internal error occurred when writing D0 054 E
07/08/2007 00:03:17 Job cancelled after system exception ERROR_MESSAGE 00 564 A
I thought there will be an ABAP dump, I found this internal error (in bold in the log above). I tried searching for info on this but no help, it does not says error writing to what? Please help.
Thanks
Ali

It seems a syncronization problem..
You can create a customer message providing the following information:
1. The symptoms that occurred
2. The highest Support Package
3. The current SAP_BASIS Support Package level
4. The queue that is currently selected
Header Data

Error occurred during CTM planning run

Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
Khadar

Hi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran.

Error occurred during deployment plan generation

When I was publish my project i have a below error
An exception occurred when deploying the database for the application. An error occurred during deployment plan generation. Deployment cannot continue.
Visual Studio 2011
Microsoft SQL 2008
Firewall on server is off

A web application? Or a desktop application?
Yann -
LightSwitch Central -
Click here for FREE Themes, Controls, Types and Commands
Please click "Mark as Answer" if a reply answers your question. Please click
"Vote as Helpful" , if you find a reply helpful.
By doing this you'll help others to find answers faster.

An error occurred when connecting to the accounting system ID3DEV310

Hi Friends,
We are Implementing collaboration project 4.5 and want to link with project system in ECC 6.0. Both these are in the different servers.
I have done the configuration on both the servers and also maintain the RFC (ID3DEV310) in Object Links.
When I create or open the existing project I get the following error: "An error occurred when connecting to the accounting system ID3DEV310"
Costing Variant taken is PS01 (Project Planning).
Your reply would be highly appreciated.
Aryan

Hi Deepak,
I have assigned the RFC destination and web server to the object type: "0WBSELEMENT" only
Also the same has been done for define Object links for accounting integration "0FIN_INT_ERP_PS"
I have entered these specific to PS objects only.
Aryan

BDC to assign MIC -:Error occurred when checking type $ group $.

Hi
We have developed a BDC program to assign MIC`s in routing operations,at the end of assigning the MIC`s in the operations the system is giving the below message .
Error occurred when checking type $ group $.
Please note that 100% sampling procedure is assigned in MIC`s.
Please advise how to recfity the same .
PS :- while creating it manually there are no errors.
Regards
Trishna Nambiar

There was some problem with Sampling unit of the MICs assigned in the operations. This caused the error. Error log was in Tasklist checklist in the Inspection plan.

Internal error occurred when writing

Hi,
We have a brand new sandbox setup and I am trying to create a planning Object Structure. I added the objects and checked for errors, I got no errors. But when I try to activate the POS, I am getting the following error:
Internal error occurred when writing
Message no. D0054
Can somebody help me identify what the problem is?
Thanks.

Hello Raj -
Look at the following note
647603 if you are using SCM 4.0.
Apply the corrections this might help.
Also if you are using SCM 5.0 try to go thru the post installation steps and you will come across activation of infoobjects that are relevant and are needed for POS.
Perform the steps as described and the message shud go away.
Hope this helps.
Regards,
Suresh Garg

Another "An error occurred when attempting to change modules" error

Hello all:
After using Adobe Photoshop Lightroom on Mac OSX trouble free for the past 6 months, I opened up Lightroom today and received the following error: "An error occurred when attempting to change modules." I had not made any changes in between when it worked normally and when the error started to occur. I beleive the last thing I did before this error occurred was to go into the Print Module.
Other information--I keep all my RAW .NEF files on an external Firewire (800) 750 GB drive. This is on Mac OS X 10.5 running Adobe Photoshop Lightroom 1.3 and also with 1.4.1. I'm running an iMac 20" with dual-core 2.2 Ghz Intel processors and 4 GB of RAM. I have around 25k images total.
When I noticed this problem, I was on Lightroom 1.3. I immediately upgraded to 1.4.1, which did not solve the problem. I have also tried many suggestions in the forums including uninstalling the application and removing the .plist file.
I thought I had come up with a solution by creating a new catalog, then importing the former into it. While this seems to work immediately after the import process, as soon as I close it, the problem manifests itself again.
More details that may or (likely) may not help:
- Going to the Develop and Print Modules gives me no problems. However, when I click on Library, Slideshow, or Web, I see the error.
- I upgraded my Mac to the latest patch level after observing this error to no avail.
So it looks like my choices are to create a new file and reimport every single time, or lose all of the work I've done for the past 6 months on thousands of images.
Can anyone please help???? I promise to post the solution when we fix this darn thing so others may benefit. I'd be happy to run through any troubleshooting that y'all would suggest outside of switching to a Canon.
Thanks!!!!
Matt

I'd first check for the existence of a file ending in .lock, which should be present when LR is in use, but if it exists when LR is quit, it can cause problems, and should be deleted.
Please post back your results.

PL/SQL: ORA-04052: error occurred when looking up remote object.

Hi All,
I'm getting the following error message while executing a PL/SQL Block.
PL/SQL: ORA-04052: error occurred when looking up remote object UPLDUSER.filestatushistory@FTS
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from FTSStatement
declare
v_coun number;
begin
select count(*) into v_coun
from updluser.filestatushistory@fts;
end;Back ground of the situation as follows,
My DataBase version 10.2.0.3 DB Name :DB1
Table Owner : UPLDUSER
Table Name : FILESTATUSHISTORY
I have a report user on the same database and I have grant all on the above table to report user
Report User : RPT_FTS
SQL> GRANT ALL ON FILESTATUSHISTORY_V TO RPT_FTS;Now Please find the below database details where I'm getting subjected error.
Database version : 9.2.0.8
DB Name : DB2
User Name : RPT_REPORTS
I Have create a dblink from RPT_REPORTS to RPT_FTS on DB1 and the dblink works fine. But getting the above error while running it.
but When I do the same other 10.2.0.3 db , the above PL/SQL block works fine without any problem.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now the strange about this is that I have Created a new table on DB1 db like below;
SQL> CREATE TABLE UPLDUSER.ABC AS SELECT * FROM FILESTATUSHISTORY;and retry my code on DB2 (9.2.0.8) after changing the table to ABC and it worked. Now I don't know whats wrong with a original table(FILESTATUSHISTORY).
To over come the problem and a work-a-round method I create a view on the DB1 (RPT_FTS) like the below
SQL> CREATE VIEW FILESTATUSHISTORY AS SELECT * FROM UPLDUSER.FILESTATUSHISTORY;and was able to run the PL/SQL block Remotely.
Just wants To know what whould have been the cause for this .
Cheers
Kanchana

Hi Kanchana,
Perhaps following link of google search has answer to your query
ORA-04052. The search result contains some useful articles whose URLs I shan't post in the forums.
HTH!
*009*

Why does an unknown error occur when I try to save a document as a word file?

why does an unknown error occur when I try to save a document as a Word file?

Hi Judy,
Deleting the Preferences files seems to be missing from your list.
Quit AppleWorks,
In the Finder, go to:
username > Library > Preferences
In the Preferences folder:
Locate and Delete the File com.apple.appleworks.plist
Locate and Open the Folder AppleWorks
In the AppleWorks folder, delete the following files:
AppleWorks 6 Assistants Cache
AppleWorks 6 Preferences
AppleWorks 6 Translators Cache
Optional:
AppleWorks Button Bars
This file contains your Button Bar preferences. If you have made changes to the Button Bar, but hanve NO issues that can be traced to the Button Bar, it may be left in place.
Regards,
Barry

I have Lightroom 5 installed on my MacBook Air but when I try to open the program I receive the message "An error occurred when attempting to change modules". I uninstalled, emptied trash and re-installed but I continue to get the same message.

I have Lightroom 5 installed on my iMac which I downloaded (uploaded?) to my MacBook Air (via wi-fi) but unlike the iMac, I'm unable to use the program on the MacBook Air. When I open the program on the iMac and click 'file', (as people using the program would know) there are 21 options - import pics, export, etc, etc - however, in the version on the MacBook Air, opening 'file' gives me four options - New Catalogue, Open Catalogue, Page Setup and Printer - and with that comes the pop-up message "An error occurred when attempting to change modules". Any ideas please?

A forum thread from 3 years ago talking about LR 1.x which had this problem seems to need permissions fixed or new folders created with the corrected permissions. You might try doing a repair permissions for your user and/or run LR as an administrator user. I am a PC person so cannot tell you exactly how to do that.
https://forums.adobe.com/message/1457020

An error occurred when processing the spool request. (Possibly due to memory problems)

Hi SAP,
My backgroud job is failing with log as shown below
Job started
Step 001 started (program ZMRS0065, variant SUS
Step 002 started (program ZDRS0090, variant SUS
Step 003 started (program ZFRS0305, variant SUS
Step 004 started (program ZFRS0300, variant SUS
Access error
Job cancelled after system exception ERROR_MESSAGE
An error occurred when processing the spool request. (Possibly due to memory problems)
Kindly help out in this issue
Regards
Mohammed

Hello Mohammed,
Have you seen any error in your SM21 system log and developer trace of spool work process
during that time?
The maximum size when create spool is 2GB.Pls also check if you are creating a spool
larger than it.
Best Regards
Jie Bai

Error message in TRFC 'An SQL error occurred when accessing a table'

Hi all,
Can any one tell what this below error message is about in while go into TRFC
'An SQL error occurred when accessing a table'.
and please tell me how to solve this problem.

Hi
Try to see what all tables are accessed by data source. and see if there is any lock on that..
If some other job is accessing that table - then there might be lock on that which is causing failure..
1) Try looking at ST22 dump also..
2) Try to do RSA3 in R/3 and if see if its is fetching any records or not..
Hoep it helps
--SA

Err msg: "An error occured" when launcihng Planning

Similar Messages

Maybe you are looking for