Erratic AirTunes and printing

Hello,
I have some problems with my first-generation AirPort Express.
First of all, AirTunes suddenly stopped working. It seems to fix itself every now and then and works for a little while, then, I sometimes get playback that will be on for 2 seconds, off for a minute, on for 5 seconds, off for half a minute, etc.
Then, printing works, but only once: I send one job to the printer, it gets printed, send another one, nothing happens. It appears in the printer queue as if the job had been printed, and then it's gone - without the printer actually ever doing anything. My guess is that these print jobs also get stuck in the AirPort Express somewhere.
I've tried almost anything I could think of in the software side - reset to factory settings, installed old firmware, then installed new firmware again, fidgeted with all different kinds of settings - nothing.
Otherwise the connection is functioning fine though.
What could this be? If it's a hardware issue, it seems odd to me, but I can't think of anything else.
Thanks in advance!
Florian

No one has an idea? I'd like to know whether it's at least theoretically possible that this is a hardware and not a software issue...

Similar Messages

Playing Music via Airtunes and using as a repeater simultaneously

Id like to use Airport Express as a repeater and a client for playing music via Airtunes simultaneously. Is this possible anyhow? I do only have two choices using the airport-assistant: 1st Connecting to use Airtunes and bonjour printer; 2nd using as a repeater. This can´t be everything!

alterkram, Welcome to the discussion area!
Regardless if you configure the AirPort Express (AX) to join a wireless network or as part of a WDS, both Airtunes (music streaming) and wireless printing are available.

AirTunes gone, printer not found, what happened?

I got a new macbook air 11". I couldnt get it to print through through my AP Express, which is connected to my AP extreme network.
After messing about, downloading new drivers, both from Apple and from HP, now I can neither print, and also AirTunes has dissapeared. (there's no button in iTunes).
Airport Utility reports no errors. I tried to reset and re-install the AP express, and it worked fine, but still no Airtunes or printer.
The same error occurs in my Macbook Pro running leopard, where I didnt change any settings at all, so I presume the problem must be in the network somehow, but I cant understand how.
I upgraded to 10.6.5 about the same time, but that wouldnt have affected the AP units would it?
So its weird the Macbook Pro running Leopard also cant print/air-play
Grateful for suggestions

Hi, Rasmus.
First, make sure that your printer and speakers are powered on and are securely connected to your Express.
Next, in AirPort Utility, select your Express in the sidebar and press "Manual Setup." Authenticate if necessary.
Press "Printers" in the toolbar. Let me know whether your printer appears the list.
Press the "Music" icon in the toolbar. Ensure that the "Enable AirTunes" box is checked. If it isn't checked, put a check in it. Then press "Update" and allow your Express to restart.

Can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously

I can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously. My old AE allowed this but can't make the new one work that way.

In your instructions, you say to use the same encryption type as the router has set up. well, I am using the WEP 64 bit encryption and the Airport Utility does not have this...it has 40 bit. Is this a problem, or do I have to be using a the same type of encrytion ?
WEP is available in either 40 or 104-bit, but is usually "advertised" as either 64- or 128-bit respectively. For example, 64-bit WEP uses a 40 bit key (also known as WEP-40), which is concatenated with a 24-bit initialization vector (IV) to form the 64-bit RC4 traffic key. So, WEP 64 on the Linksys & 40-bit is equivalent.
What concerns me more is the loss of bandwidth performance you are experiencing when connecting the AX. When the AX is configured as a wireless client it is acting just like any other wireless devices (computer, laptop, printer, etc.) and not like another router. This should cause little or no bandwidth loss. True the more secure the wireless encryption used WPA2 vs. WEP, the more overhead is required for security, but the differences you are seeing seem excessive.
It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your Linksys from providing a good clean signal.
I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
For Macs:
o MacStumbler
o iStumbler, or
For PCs:
o NetStumbler

HELP to Open and Print automatic a REPORT

Hello, I'm a Portuguese Developer, and i've a challenge, that is, i want to open REPORT by FORMS in RDF format and i want to open and print automatic way, i do not want to open, and then have to go print button to pint them.
I want to open by FORM way and print automatic and close imediatly.
HEP ME PLEASE!
Thank you

Aslam o Alikum (Hi)
Ofcourse you can do this by specifing system parameters like DESTYPE=Printer and DESNAME=PrinterName
Replace PrinterName with you printer name
See System Parameters in Reports Under Data Model

Is there a way to create a year at a glance with detail and print?

Is there a way to create a year at a glance with detail and print?

To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time?

Unable to schedule a report to email and print

I have been working on a task to both print and email a report to recipients whose email addresses are obtained at runtime. So far I am able to email the report as a PDF attachment, however, I am not able to get the report to print. I have three thoughts as to why the report is not printing.
1. The printer is in a subdomain under the domain where InfoView and the Enterprise server reside.
2. It is not possible to schedule a report for both an SMTP and print destination simultaneously.
3. The format is causing an issue in printing - the SDK API states "Printer is a report format specific destination and can only be used when the report object is a Crystal Report."
I have looked at the scheduled report in InfoView and can see that the print settings I am passing are correctly set for the scheduled instance. Does anyone know if there is a problem with trying to schedule printing and email at the same time, or if the report format must be .rpt?
Below is my code. Thank you for your time.
String query = "Select SI_ID, SI_NAME, SI_PROCESSINFO, SI_SCHEDULEINFO, SI_SCHEDULE_STATUS From CI_INFOOBJECTS Where SI_ID=" + reportId;
        IInfoObjects results = null;
        ISchedulingInfo schedulingInfo = null;
        try {
           results = iStore.query(query);
        } catch( SDKException sdke ){
           logger.error(sdke);
        if( !results.isEmpty() ){
            // get the actual report object from collection and set scheduling information
            IInfoObject report = (IInfoObject)results.get(0);
            schedulingInfo = report.getSchedulingInfo();
            schedulingInfo.setType(CeScheduleType.ONCE);
            schedulingInfo.setRightNow(true);
            schedulingInfo.setRetriesAllowed(3);
            try {
                Set<String> keys = destinations.keySet();
                Iterator i = keys.iterator();
                while( i.hasNext() ){
                    String dest = (String) i.next();
                    if(dest.equals(CrystalDestinations.EMAIL)){
                        // get the destination object and set it to SMTP plugin
                        List emailAddress = destinations.get(CrystalDestinations.EMAIL);
                        IDestination destinationObject = schedulingInfo.getDestination();
                        destinationObject.setName("CrystalEnterprise.SMTP");
                        IDestinationPlugin smtpPlugin = (IDestinationPlugin) iStore.query("SELECT * FROM CI_SYSTEMOBJECTS WHERE SI_PARENTID = 29 AND SI_NAME='CrystalEnterprise.SMTP'").get(0);
                        ISMTPOptions smtpOptions = (ISMTPOptions) smtpPlugin.getScheduleOptions();
                        smtpOptions.setDomainName( emailDomain );
                        smtpOptions.setServerName( smtpHost );
                        smtpOptions.setSMTPUserName( smtpUser );
                        smtpOptions.setSMTPPassword( smtpPass );
                        smtpOptions.setSubject( "Email for report " + report.getTitle() );
                        smtpOptions.setMessage( "This is the message body" );
                        smtpOptions.setSenderAddress( smtpUser + "@cdrh.fda.gov" );
                        smtpOptions.setSMTPAuthenticationType( ISMTPOptions.CeSMTPAuthentication.LOGIN );
                        for(int j = 0; j < emailAddress.size(); j++ ){
                            smtpOptions.getToAddresses().add( emailAddress.get(j) );
                        destinationObject.setFromPlugin( smtpPlugin );
} else if ( dest.equals(CrystalDestinations.PRINT) ){
                        List printers = destinations.get( CrystalDestinations.PRINT );
                        IReportPrinterOptions printerOptions = ((IReport)report).getReportPrinterOptions();
                        printerOptions.setCopies(1);
                        printerOptions.setEnabled(false);
                        printerOptions.setPrinterName( (String)printers.get(0) );
                        printerOptions.setPageLayout(IReportPrinterOptions.CeReportLayout.USE_SPECIFIED_PRINTER_SETTING);
                List reportPrompts = ((IReport)report).getReportParameters();
                for(int j = 0; j < reportPrompts.size(); j++){
                    IReportParameter prompt = (IReportParameter) reportPrompts.get(j);
                    if(prompt.getParameterName().equals(mdrParamName)){
                      IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
                      v.setValue(reportParameters.get(mdrParamName));
                    } else if(prompt.getParameterName().equals(addressParamName)){
                        IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
                        v.setValue(reportParameters.get(addressParamName));
                IReportFormatOptions format = ( (IReport) report).getReportFormatOptions();
                format.setFormat(IReportFormatOptions.CeReportFormat.PDF);
                iStore.schedule( results );

Hi Jason,
Based on your code, I could not tell if you were scheduling a Crystal Report or a WebI document.
Regardless, what I would suggest is you try scheduling the report/document on InfoView.
Once you schedule it on InfoView, you can retrieve the instance on Query Builder (or through code) and compare the properties that are being set through InfoView and the one you set through your code.
This should indicate if you are missing some properies or have set some properties incorrectly.
Hope this helps.
Regards,
Dan

Print from ipad if i connect a usb connector to my ipad can i connect my printer to it and print??as im thinking of buying the new ipad for work but i must be able toprint

hi can any one help i want to get the new ipad for work but i need to print.i see i can buy a usb connector can i print if i plug my printer into the usb.

If you have a USB printer connected to your computer, Mac or PC, you can activate or install AirPrint and print from your iPad over wifi without any special apps.
Activate AirPrint in Mac OS X;
http://netputing.com/airprintactivator/
Add AirPrint to Windows;
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-windows/

Open and print pdf file through form 6i

I want to run and print a pdf file through the form. Any suggestion please......
thanks in advance....
ifti

you could try using the DDE package to open the file
and then print from the actual file location using a host command.

Open and print a PDF from web

I created an application to open a PDF and print it directly on the default printer. This application works if the file is a Windows' network address (example: \\192.168.0.4). But if I put an internet address (URL), the Acrobat Reader presents the following error:
There was an error opening this document. The syntax of the name of the file, folder or name of the volume is incorrect.
The command I'm using is:
"C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe\" /t http: \\192.168.0.4:8082\test\file.pdf \\192.168.0.15\HPLaserJet
There are print directly as a URL?

>
horatiusx wrote:
> Hi all gurus.
>
> I developed a Web Dynpro application to let the users create their own sales orders.
>
> Now I need to let them print the orders when they need to. Searching on the documentation I have, I've never found anything about crating a pdf print from the WD Application.
>
> There must be a way, because I managed to do that even with the very old ITS (the one in which you had to write HTML code...) but i cannot find how.
>
> Can anyone help me please? Even a tutorial would be very appreciated.
>
> Thank you in advance...
You need a Smartform, SAPScript, or AdobeForm to be defined for your output. Define an action/method for print, then pass the data to your Form. SmartForms are not bad, as SmartForms generate a Function Module, and are easy to call.
Call the SmartForm Function with PDF output = 'X' (parameter within Output Control I think). Then pass the PDF_DATA[] table (type = TAB_SOLIX) to a new window output .
Don't have the code in front of me, but have done it several times.
Adobe Forms is another good option, but you need Adobe Server, and generally I have found ADOBE to be SLOOOOOWWWWW. I think Steve Jobs might have been on to something with ADOBE -- just my opinion.
And of course, it can be done with SAPSCript, but I would need a whole blog on how to do that.....

Pages - Share and Print - Email document issue

I ran into an issue today on my iPad2 and wanted to see if it was just me or can anyone reproduce this error. If it turns out to be just me, someone help me undertand how to get around the issue. If it is more widespread, where do I report this so it can be resolved in an future release?
Here is what happened.
I received a Word document via e-mail. When I opened it in e-mail and chose to "open with Pages" it worked fine. Imported into Pages sans the font (which I've come to expect). Then I edited the document (it was a quick survey I was taking) and then was ready to send it back to the person who sent it to me. I chose the tools icon, selected "Share and Print" then selected "Email Document" and then chose Word as the format. It converted it and attached the file in a blank e-mail ready for me to address and send.
Well, I wasn't ready to send just yet. So I clicked on "Cancel" and then "Save Draft" which it did successfully. Then I went into email, edited my "Draft" in my Drafts folder, addressed it, etc. and sent it on its merry way. Well, guess what? The file did not come through on the e-mail. Just my text.
I tried "copy and paste" of the file after saving as a draft and it only sent the "picture" of the file ICON and not the file itself. I tried multiple times saving it as a draft and then sending and it never worked.
If I send from within Pages right at the time after "Email Document" is selected, it works every time. It seems to only be when I save the email as a draft from within Pages that it will not send the attachment or something happens to the attachment. I did notice also, that if I edited any "text" from that draft and then saved the draft again, all my edited text wouldn't save either. So any "Draft" saved from Pages I couldn't edit regardless of any attempt.
Draft saving and editing within the email application works as expected.
NOTE: Just before submitting this discussion, I tried the above on my wife's iPad2 with the same results. Anything "saved as a draft" from Pages in e-mail, will not send the attachment. Anything sent directly from within Pages and not saving it as a draft, will send the attachment.
There are times I would like to save it as an attachement, should this work? Thanks everyone!
Edward

I am only vaguely familiar with iWork.com. I know it is a cloud based way to share documents with others, but this is what the send to option does when you work with Pages, Numbers or Keynote on the iPad. I would assume that the function performs the same way in iWork.com. - but it is only an assumption.
"Send to" is the command that will let you send that file to your computer the next time you sync with iTunes. It is the way the iPad transfers the file to your computer - the iPad method of file sharing. You can sync files back and forth from iPad to computer with file sharing as long as the app on the iPad is compatible with a similar application on your computer. In your case iWorks apps on both the iPad and your Mac.
This article will explain it in great detail for you.
http://support.apple.com/kb/HT4088

To upload a RTF and a PDF file to SAP R/3 and print the same through SAP

Hi,
I have a requirement to upload a PDF file and a RTF file to SAP R/3 and print the same.
I wrote the following code for uploading a RTF file to SAP R/3 and print the same. However, the problem is , the formatting present in the RTF document( bold/italics..etc) is not being reflected when I do the 'print-preview' after the executing the code below :
report z_test_upload .
data: begin of itab occurs 0,
         rec type string,
      end of itab.
data: options like itcpo.
data: filename type string,
      count type i.
data: filetype(10) type c value 'ASC'.
DATA: HEADER LIKE THEAD    OCCURS   0 WITH HEADER LINE.
DATA: NEWHEADER LIKE THEAD    OCCURS   0 WITH HEADER LINE.
DATA: ITFLINE LIKE TLINE    OCCURS   0 WITH HEADER LINE.
DATA: RTFLINE LIKE HELP_STFA OCCURS   0 WITH HEADER LINE.
DATA:   string_len TYPE i,
        n1 TYPE i.
selection-screen begin of block b1.
parameter: p_file1(128) default 'C:\test_itf.rtf'.
selection-screen end of block b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
       IMPORTING
            file_name = p_file1.
start-of-selection.
move p_file1 to filename.
call function 'GUI_UPLOAD'
     EXPORTING
          filename                = filename
          filetype                = filetype
     TABLES
          data_tab                = itab
     EXCEPTIONS
          file_open_error         = 1
          file_read_error         = 2
          no_batch                = 3
          gui_refuse_filetransfer = 4
          invalid_type            = 5
          no_authority            = 6
          unknown_error           = 7
          bad_data_format         = 8
          header_not_allowed      = 9
          separator_not_allowed   = 10
          header_too_long         = 11
          unknown_dp_error        = 12
          access_denied           = 13
          dp_out_of_memory        = 14
          disk_full               = 15
          dp_timeout              = 16
          others                  = 17.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
loop at itab.
string_len = strlen( itab-rec ).
n1 = string_len DIV 134.
ADD 1 TO n1.
DO n1 TIMES.
    rtfline-line = itab-rec.
    APPEND rtfline.
    SHIFT itab-rec BY 134 PLACES.
ENDDO.
endloop.
HEADER-TDSTYLE = 'S_DOCUS1'.
HEADER-TDFORM = 'S_DOCU_SHOW'.
header-tdspras = 'E'.
CALL FUNCTION 'CONVERT_TEXT'
EXPORTING
CODEPAGE               = '0000'
    DIRECTION              = 'IMPORT'
    FORMAT_TYPE            = 'RTF'
   FORMATWIDTH            = 72
    HEADER                 = header
    SSHEET                 = 'WINHELP.DOT'
    WITH_TAB               = 'X'
    WORD_LANGU             = SY-LANGU
    TABLETYPE              = 'ASC'
TAB_SUBSTITUTE         = 'X09 '
LF_SUBSTITUTE          = ' '
REPLACE_SYMBOLS        = 'X'
REPLACE_SAPCHARS       = 'X'
MASK_BRACKETS          = 'X'
IMPORTING
    NEWHEADER              = NEWHEADER
WITH_TAB_E             =
FORMATWIDTH_E          =
TABLES
    FOREIGN                = RTFLINE
    ITF_LINES              = ITFLINE.
LINKS_TO_CONVERT       =
if sy-subrc <> 0.
endif.
CALL FUNCTION 'PRINT_TEXT_ITF'
EXPORTING
     HEADER        = newheader
     OPTIONS       = options
IMPORTING
RESULT        =
TABLES
    LINES         = itfline.
if sy-subrc <> 0.
endif.
Any hints or suggestions to solve this problem will be highly appreciated.
Thanks,
Avra

Hi Vishwas,
Check out the thread [Efficient way of saving documents uploaded|Re: Efficient way of saving documents uploaded by users; and check the blog by Raja Thangamani.
Also check the thread [Export Images through Function Modules   |Export Images through Function Modules;.
Hope it helps you.

Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I'd like students to be able to view my comments on printed version of their papers.

Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I am a teacher, and I would like students to be able to view my comments on printed versions of their papers. I know word displays the comments off to the side of the document, and those comments can be viewed all at once and printed alongside the document.

There doesn't appear to be a way to print conmments in either Pages or Numbers in the Mavericks versions.
Jerry

Why cant I highlight part of a document and print only what is selected in safari?

Why is it not possible to highlight and print the selection in Safari, thought the imac was supposed to do everything, WRONG.
I also have I.pad 2 and because it does not support adobe flash, I cannot open a magazine that I have each week, I have to do this on the imac, so when away from home it again doesnt do what I want it to. Does everything people say. WRONG AGAIN.
Should have stuck with the laptop, it actually does do these things mentioned above.

I purchased the iPad first and waited a year HOPING Apple would fix this problem OR at the least provide something comparable to WINDOWS!
WRONG....and yes it is hard to believe for how ADVANCED Apple is.....that they don't have a simple easy program that allows you to HIGHLIGHT and PRINT ONLY what you highlight!
But....they are making leaps and bounds.....at least you can now cut & paste....thats a good thing!?
HOPEFULLY.......in the VERY,VERY NEAR FUTURE Apple will supply us with the simple software to do these simple time saving chores!
(highlight and print ONLY what you highlight)
Until then we have to cut and paste to several different apps or programs....hoping it will allow you to print ONLY WHAT THE USER WANTS TO PRINT!

Is there a way to view and print a single month.....

without the partial previous and partial following months?
I'd like be able to view and print, for example, just August, without seeing the last few days of July and the first few days of September.
Thanks.

Yes, people I work with use it, assistants fill the fields out for me. As far as I know there is no "Print Browser" option. Some folks have assistants copy and paste the info into text, csv or xml files. Since everthing has gone to meta tags, this approach is going the way of the electric spoon or feeding mayonnaise to Tuna.
Peace & Covering Fire,
B.S.

Erratic AirTunes and printing

Similar Messages

Maybe you are looking for