Erratic mouse double-click problem (OS or Motherboard?)

I have a MacBook
MacBook4,1 / Intel Core 2 Duo 2,4 GHz (2Gb RAM)
I have two mice: Microsoft Wireless Mobile Mouse 3000 v2.0 (bough lately) and a Logitech M-BT-96a (simple 2 buttons with wheel)
I don't know if it is after upgrading to Snow Leopard (10.6.8) but one or the other are causing unwanted double-clicks!
I downloaded Lion but didn't install yet.
The trackpad act also funny especialy with touching to create clicks and double-clicks. I tough first it was because I press to heavely on each side of the trackpad… I changed my position: Same thing.
I have two USB hubs daisy chained. Even when I'm unplugging them… It does the same thing.
Thanks for your help

As best as I can recall, my original eMac mouse lasted maybe a year before both the mouse tracking and the button contact switch began to act erratically. The button contact can wear out. If you still have your original eMac mouse, you've done an amazing job of treating it gently (maybe you can give me lessons --- I end up replacing mice every 2 years or so!).
Can you try another USB mouse? Any third-party three button USB mouse will work as a basic three-button mouse without needing any additional software to be loaded; e.g., the Logitech Prefernce Pane offers more control over features of their mice, but you can do without it and just plug the mouse in.

Similar Messages

FRM-40735 when mouse double click trigger raised unhandled exceptiORA-01722

I am using Forms 10g.
i am writting a procedure in When mouse double click trigger that will display all the values available for ip address from this procedure.
The procedure is
DECLARE
CURSOR cr
IS
SELECT LEVEL NUM
FROM DUAL
CONNECT BY LEVEL<=(Select max_range from t_ip_address_dtl where category_name=:t_item_cpu.category and block_name =:block_head.block)
MINUS
SELECT TO_NUMBER(SUBSTR(IP_address, 12))
FROM T_item_cpu;
abc number(4);
abc1 number(4):=null;
BEGIN
FOR rec IN cr LOOP
abc1 := abc1 || ',' || rec.num;
END LOOP;
Message('You can use between these nos: '||abc1);
Message('You can use between these nos: '||abc1);
END;
It is showing this error :-

Yes bye mistakly i posted ,, due to internet problem..

Why can't I minimise itunes with mouse double click?

why can't I minimise itunes with mouse double click?

I do not know if you can ..
Try -
Command + M .

How to capturing Mouse double click action?

Hi all,
how can we identify the "mouse double click" action?
MouseListener has methods for only mousePressed,released,clicked (single).
Thanks in advance..
Regards
Sojan

Hi,
Thanks it worked ..
e.getClickCount() value increases if we keep on clicking on the component, is there anythning wrong by interpreting double click as
"e.getClickCount() >=2 "?
Regards
Sojan

Distinguishing b/t two single mouse-click and mouse-double-click

Hi,
I am curious to find out how Forms will distinguish between two single when-mouse-click events and a single when-mouse-doubleclick event. Is it simply a timing issue or is there more involved i.e. the 'co-ordinates' of the mouse. Thanks in advance for any opinions given,
regards,
Kevin.

The difference is same as the difference of Apple and Orange.
Its depends on O/S and event management within OS kernel.
You can change the timing in Control panel of mouse double click.

MOUSE DOUBLE CLICKING

I have an hp mouse...however it says product of china on the back..It does look like an hp mouse though..
Anyhow..it's doubleclicking..it's driving me crazy..
I've had the mouse for a few years..
It just starting doing this..
I"m running XP
It is a USB..with a red light under it...with an optical eye?...Not sure if that's what they call it..
Please help..Are there drivers I can use to fix this...
I"m not sure if a windows update..might have done this..
Many thanks..

Hi kittylondon,
I understand your mouse is acting like you are double-clicking even though you are only clicking. Take a look at the following, Troubleshoot mouse double-clicking when you single-click. The document also applies to Windows 7 and Windows Vista, so you will have to make sure you are referencing only the portions that apply to Windows XP. I hope this is of help to you. Best of luck. Have a wonderful day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

In Yosemite, Magic Mouse double-click function doesn't work

On my iMac running Yosemite 10.10.2, the double-click function on the Magic Mouse no longer works. So to open a folder, or anything for that matter, I must always do click-control ---and that doesn't work for everything. For example, I can't double click on a character in Glyphs, so this renders Glyphs useless. And so on... I have gone into preferences to see if anything was amiss in the settings, but everything checked out fine. Is there a fix for this, or do I have to wait for the next upgrade for Yosemite? Help! Thanks... --Royce

What's the answer to this mouse problem, please? Why does my double-click no longer work on my magic mouse since downloading Yosemite 10.10.2 to my iMac?
What's up Apple?
Mark

Usb mouse double click

Hi,
Im using fluxbox as window manager and after some upgrades the mouse very often doing double click, if I click only once. On touchpad is all right, so I dont know where is the problem. I tryed change xorg configuration - other protocol and some options, but nothing helped. I also tryed change speed double click, but nothing changed too.
My xorg config is now:
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
generated by hwd
Thanks for all replies
edit: I have kernel 2.6.33.4 and before in kernel 2.6.33.3 "mouse bug" was there too.
Last edited by aivi (2010-05-15 11:47:40)

edit: So Its not working well, xev show still that I pressed and released twice button, any ideas?
In blackbox too. Its somewhere else.
--------So it was by .fluxbox/keys I tried move them somewhere else and restart X and Its working right now. -------
Last edited by aivi (2010-05-15 13:25:12)

Mouse double click on single click

My mouse has been double clicking on a single click since changing to Mavericks 10.9. I have tried different mouse brands from Apple to Rapoo and everything inbetween. I have played with the mouse settings and rebooted, reset the pram and nothing works. It's very frustrating as a graphic designer to be slowed down because of a mouse.
Has anyone ad this problem and has the solution to it?
Thanks

From the menu bar click on Go > (Hold option down) Library will appear, click it.
In the Library goto Preferences
Locate the following files and delete them.
-com.apple.driver.AppleBluetoothMultitouch.mouse.plist
Restart the computer and test.
Hope this helps.

Doubt - mouse double click invokes both single and double click

Hi Friends,
I added mouse listener to a java component. In the mouseClicked() method, I have implementation for both mouse single and double click. When I try to double click that component it invokes the single click method first and the it invokes the double click method. My problem is when I try to double click that component it should invoke my double click method alone not single click too.
I'd be very grateful if someone can help me.
Thanks and Regards,
Sangeetha J

Your problem: a double click is two single clicks. The first click will always fire a single-click event. How's the computer supposed to know that another click is to follow?
All I think you could do is to instantiate a timer in the one-click method, set to whatever amount of time you think a double-click should take. If you get a second event while the timer's still active, it was a double-click and you can stop the timer and do the double-click action. Otherwise your timer should execute the single-click action after it timed out.
But this will make your GUI look like it's responding slowly to single-clicks.

ITunes double click problem (query bug)

With the recent iTunes update 7.7.1(11), I noticed that when switching between iTunes (esp. when it is in the compact mode) and other apps, a single mouse click in iTunes is often interpreted as a double click. This leads to distress when I try to pause the current track as the double click action pauses the track then plays it.
To relieve this symptom, I need to minimize iTunes and maximize it again.
Anyone else out there with the same problem?
(sorry about the double post - first time @ the discussion pages)

i'm having this same problem, but the "auto" double-clicking happens in mac mail. i've checked mouse settings, i've rebooted, but nothing seems to help. whenever i switch into mail, my first click is always treated as a double-click. (very annoying, since it usually opens a message into an unwanted window.)
another mouse-related problem: sometimes my mac seems to be swallowing mouse clicks. (not in mail, though! maybe that's where all those lost clicks are going! <g>) my mac acts as if i am clicking on a dead zone (that is, a region that doesn't accept clicks). i can click on the region all day (e.g. a tab in safari) and nothing will happen. if i, however, click on something else (even, say, just the background of a web page), the go back to the area that was dead moments before (that tab, e.g.), suddenly it accepts the click.
any ideas?

Double click problem in iTunes (query bug)

With the recent iTunes update 7.7.1(11), I noticed that when switching between iTunes (esp. when it is in the compact mode) and other apps, a single mouse click in iTunes is often interpreted as a double click. This leads to distress when I try to pause the current track as the double click action pauses the track then plays it.
To relieve this symptom, I need to minimize iTunes and maximize it again.
Anyone else out there with the same problem?

Hi,
transaction VA23 is for Quotations..
so in your select query write...
select vbeln
         erdat ........
          from vbak into corresponding fields of table <table name>
          *where vbtyp eq 'B'*. (Document type for Quotation)
Then it works.
Regards,
Sathish Reddy.

AVL Double click Problem

Dear Experts,
I hv created an ALV report. when in double click on the record it take me to the required tcode (FB03).
But the problem is ,it always display last record of internal table if I clicked on first record,
Can any one suggest me something.
Regards,
Maverick

Thanks for ur reply.
I m using normal ALV. go through the following
form display_all_item_alv.
w_repid = sy-repid.
perform update_catalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = w_repid
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
*   I_CALLBACK_TOP_OF_PAGE            = 'TOP-OF-PAGE'
   IT_FIELDCAT                       = I_FCAT[]
   I_SAVE                             = 'X'
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER           =
*   ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = i_faglflexa_all
* EXCEPTIONS
*   PROGRAM_ERROR                     = 1
*   OTHERS                            = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.
*       FORM USER_COMMAND                                          *
*       --> R_UCOMM                                                *
*       --> RS_SELFIELD                                            *
form user_command using r_ucomm like sy-ucomm
                  rs_selfield TYPE slis_selfield.
w_gjahr = p_gjahr.
case r_ucomm.
     when '&IC1'.
        if r_open = 'X'.
          set parameter id 'BLN' field i_faglflexa_open-belnr.
        elseif r_clear = 'X'.
          set parameter id 'BLN' field i_faglflexa_clear-belnr.
        else.
          set parameter id 'BLN' field i_faglflexa_clear-belnr.
        endif.
      set parameter id 'BUK' field p_bukrs.
      set parameter id 'GJR' field w_gjahr.   "i_faglflexa_clear-gjahr.
      call transaction 'FB03' and skip first screen.
endcase.
endform.                    "user_command
Regards,
Maverick

Magic Mouse: Double-click function

I have "secondary-click"(right) activated on the "magic mouse" and it's great if I want to open a drop-down list on a page.
However, on the "mighty-mouse" which I had before, the "right-click" was set up to act as a "double-click" which was very handy for opening documents and folders etc.
Is there any way to set up the "magic-mouse" so that a "right-click" will act as a "double-click"?

You could try a third-party driver like BetterTouchTool (http://blog.boastr.net/?page_id=1722)

Trying to catch mouse double click

Using come code in the API 1.3 documentation, I created a JList and am trying to catch when a user double clicks on an item in the list. I have the following snippet of code:
public void mouseClicked(MouseEvent e) {
if ((e.getClickCount() == 3) && (e.getSource() == list1)) {
int index1 = list1.locationToIndex(e.getPoint());
System.out.println("Double clicked from the left list on Item " + index1);
When I double click on an item in list1, it prints out the output line twice as in:
Double clicked from the left list on Item 1
Double clicked from the left list on Item 1
How can I get it to run the code only once. I'm not sure why it's running it twice. Any Ideas would be helpful. Thanks....
Matt Menard

I've used similar procedure with success in JDK1.3.1. Without seeing the rest of your code, the only thing left for you to experiment with is to call the consume() method if the count is greater than 1. I did notice that Java mouse event handler leaves much to be desired. For example, the mouseentered and mouseexited events kept getting fired even tho the mouse has entered and never leave.
V.V.

Erratic mouse double-click problem (OS or Motherboard?)

Similar Messages

Maybe you are looking for