Erratic performance / missing footage with Premiere Pro CC and After Effects CC 2014 dynamic links

Hi all,
I briefly touched on this amongst a host of other issues I has having while cutting my last project.
Unfortunately I never heard anything from anyone regarding my issues with the Dynamic Link system.
I had to bite the bullet and export (2-4K RAW) chunks of my last project, out of premiere using a Quicktime animation codec. This added an extra week to the post production process (which I did NOT get paid for).
I'm also a bit frustrated because it pushed the project past the deadline. Though the client was understanding, they were far from thrilled and it reflects poorly on me.
Anyhow. Project complete, on to the next-
This time, I'm using mostly footage shot from an FS700 in AVCHD. I figured maybe the RED footage was somehow too much for the program to handle with my specs, however I am having the same issue as last time.
I'll select a clip, or group of clips, go to replace with after effects composition, and sometimes they all make it, and often times they don't. The clips were shot within a couple minutes of one another and no settings were changed on the camera.
I've noticed sometime's the media will show up in the timeline, but not appear on the monitor (as pictured below). Other times the name of the clip will appear in the comp, but there will be nothing on the timeline OR in the monitor.
Never had this problem in CS6.
Adobe or anybody, please help! This is absolutely killing my workflow, and costing me time and money.
Here are my specs:
I'm running Adobe Premiere CC 2014 v8.1
Freshly installed Windows 7 Professional SP1 PC Desktop
Freshly installed Samsung 1TB SSD running my OS and Adobe CC
Intel Core i7-2600k CPU at 3.4GHz (8CPUs) - Watercooled
16GB Ram (3gb allocated for other programs)
Nvidia GeForce GTX 570 4GB GDDR5 - 3.40.62 Drivers installed
Pulling media from 2x 3TB Seagate Barracuda 7200RPM drives, striped at RAID 0
In this case pictured the second two clips in the sequence linked into AE, but the first wont show up in my monitor.

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Similar Messages

Premiere pro cs5 Adobe After effects cs 5 Dynamic link issue

Hi i have a project in premiere all on the time line cut into different snips of footage the videofiles are avi ... i want to take i snip of footage into after effects to make some edits and effects on it i have tried the following
1....opening a new comp in ae ....right clicking the footage in premiere copying then pasting it into ae nothing happens
2.... i right click the footage in premiere and choose replace with after efects comp ...ae starts up fines asks me to give the comp a name ..then i get a new comp with the footage name in the project window with a lil what looks like a film icon next to it ...but the screen to the right is black showing me no video ....what am i doing wrong any help would be great thanks

Hab mir mal heute die ganze Master Collection runtergeladen.
Alle Programme gehen, bloß die Beiden (Premiere und After Effects) gehen nicht, siehe oben....
Was mich aber wundert, habe noch das alte Programm Premiere CS 3 gefunden, und mal installiert. Das geht ohne Probleme, mag sein das dies andere anforderungen hat, aber ein Q9550 sollte doch reichen.
Befehlssätze und Features:
Q9550: MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EIST, Intel 64, XD bit, iAMT2, VT,
I7 920: Hyper-Threading, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EIST, Intel 64, XD bit, iAMT2, VT,
I7-2600k: Hyper-Threading, VT-x, AES-NI, Intel 64, Idle States, EIST, Thermal Monitoring Technologies, Intel Fast Memory Access, Intel Flex Memory Access, XD bit
Aber ob es wirklich daran liegen kann?
Das neue System wird zwar eine I7-2600k als CPU haben, aber leider gibt es kaum eine CS4 Software von Adobe mehr.

Premiere Pro CC and After Effects CC work slowly together - much worse than CS6

Premiere Pro CS6 and After Effects CS6 worked together really well. I could have both programs open and make a change in After Effects, then go back to Premiere Pro and see the changes pretty quickly. Since upgrading both to CC, I can't jump back and forth and see the changes quickly. I literally have to hit Enter and render the After Effect clip after every freakin' time I make a change to it in order to see it without any pauses or jumpiness in the playback. CS6 worked great. I can't express my disappointment in the Creative Cloud "upgrade". So many things are SO MUCH WORSE!!! Adobe you have to fix this stuff.

The speed of the connection is dependent on your hardware and the type of comp you have in AE.
I haven't noticed any significant performance difference between the two versions (I've also been heavily using dynamic link since CS6 ).
Some comps will play fine in Premiere, some comps will need rendering. I generally render the clip in Premiere, as opposed to AE.
If the same comp from CS6 is behaving significantly worse in CC, then you might be on to something, but it is most likely a bug isolated to your hardware config and not a general CC issue.

Premiere Pro CS5 and After Effects CS5

Hi I'm fairly inexperienced when it comes to Adobe products. I was wondering whether Premiere Pro CS5 and After Effects CS5 can be used together, for instance Premiere Pro to do the basic editing and After Effects to do some more advanced stuff before importing the clip back into Premiere Pro for exporting the film.

Yeah.

Premiere Pro CC and After Effects CC - Dynamic Link of an .aep not working - Stalls during import

I have been trying to import an .aep file into Premiere Pro CC from After Effects CC. As suggested, I import the file. The dynamic import window appears. It states connected to file along with the import files ... dialogue box. It stalls there.
I have been working off my network and have all the files collected on my machine.
My workaround to get me to deadline was to render my clips from AE and import them. Importing the .aep would make more sense from efficiency and workflow.
Thank you

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Problems with Dinamic Link between Premiere pro CC and After Effects CC

I'm having serious problems with dinamic link between premiere pro and after effects, really serious problems that have 2 big projects in trouble (a documentary and a video clip) and I had to redo all the work pipeline to the consumer.
The documentary for a spanish TV was made on CC 2014 and a video clip was made on CC. Both of them with a lot of after effects composition in the premiere pro timeline. Render freeze, a lot of playback issues, and many more problems... Until I decided to remove these links between premiere and after effects and render out all the after effects compositions one by one and insert as clips in premiere pro. 1 week working away with back and fourth.
I've got a huge workstation:
i7 4990
32Gb ram
GTX780 3gb
256 gb system ssd
2 Tb project storage
*All my hardware and software are update.
I know that a lot of folks are on the same huge problem and I want to ask everyone:
How do you save this?
What is your pipeline?
Are there any solution?
Best practice to use dinamic link in a huge project?
Thanks,
Ruben Gimenez.
R&D iceblink.es
www.rambot.es

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Avid Unity with Adobe Premiere Pro CC and After Effects

Has anyone used Avid Unity for media with Adobe Premiere Pro CC? I'd like to hear some feedback as we are working on doing that right now, and I'd like to know what the hurdles or pitfalls might be.

Open System Preferences > Mouse and/or Trackpad.
Adjust the speed.
If that fails, try running the combo updater.
OS X Mavericks 10.9.3 (Update (Combo)
http://support.apple.com/kb/DL1746

How to properly configure a graphics card for Adobe Premiere Pro, SpeedGrade, and After Effects?

Alright, so I have the following system configuration:
2 NVIDIA Geforce GTX 970s
5960X CPU
MSI X99 Gaming 7 Motherboard
32 GB DDR4 RAM
256 GB and 1TB Samsung 850 Pro SSDs
Basically, although I have the whole system built together, I'm unsure how to check and know whether or not Adobe Premiere Pro is actually using the graphics card or not. I know that it has to be using some of it, otherwise it wouldn't launch properly (as I discovered from a recent experience.) However, I don't know if there are, perhaps, certain settings within the NVIDIA control panel that should be configured so that Premiere Pro can use the card to its full potential. Here is an example of what I'm talking about:
In other words, these are (I'm pretty sure) all of the default settings that the control panel applies to Premiere Pro. However, I'm not sure if there are any settings in here that I need to change or not. So what I'm looking for in a response to this question:
What settings, if any, should I change for Premiere Pro (as well as other adobe applications that can utilize all the strength of the GTX 970)?
How can I check the GPU activity to know that it's being used during a render? (For example, I can check the CPU utilization with the Task Manager while I render to see that it's being utilized to 100%).
If, perhaps, something else goes wrong and even with the right settings, let's say the card still isn't being fully utilized, what other settings might I have to change to make sure that the GTX 970 is being fully used by Adobe Premiere Pro/After Effects/SpeedGrade CC 2014?

If you want a benchmark to measure the performance of Premiere Pro's utilization of your: disk system, GPU and CPU use our Premiere Pro BenchMark (PPBM)
When you finish running the test and then run the script, you will get this report
This happens to be the result of my laptop (with SSD drives and a GTX 765M GPU)
The disk performance is self explanatory.
Number 2 is a seven layer very complex timeline with heavy CPU and GPU assistance, without GPU hardware acceleration (CPU only) it would take greater than 1350 seconds.
Three above is a measure of a exaggerated timeline using many, many GPU MPE accelerated effects and features that will use a GPU at 99% load (54 seconds above) and a CPU only export of the same timeline (802 seconds).
If you want to compare your results to others you have to register on the PPBM7 site to see the results.
EDIT! I corrected the number in 2 above originally I said 900 seconds but really it was greater than 1350 seconds

AMD FirePro D500 and Premiere Pro CS6 and After Effects CS6?

My company just recently purchased the new 2013 Mac Pro with the AMD FirePro D500 graphics cards. Everytime I try to open After Effects CS6 I get a GPUManager Sniffer Result Code: 3 error and Premiere Pro CS6 sits on the splash screen indefinitely. Does Adobe not play nice with the new card? Am I out of luck?

In effort to fix the problem while waiting for a response I unstalled both AE and PP CS6 but not I can't seem to reinstall them from anywhere.... so I don't know what version of After Effects I have/had.
My operating sysem is OS X 10.9.2 (13C64) . My graphics card information is:
AMD FirePro D500:
Chipset Model:          AMD FirePro D500
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          3072 MB
Vendor:          ATI (0x1002)
Device ID:          0x679e
Revision ID:          0x0000
ROM Revision:          113-C3861J-687
gMux Version:          4.0.11 [3.2.8]
EFI Driver Version:          01.00.687
As far as CUDA, I originally had an iMac that was using Time Machine and that is how I transfered my stuff over to the new Mac Pro. It had CUDA on there...

Premiere Pro CS5 and After Effects CS5 crash after splash screen

Im am fed up with this ive done everything i can and no one seems to know whats wrong, i installed CS5 on my macbook and imac i7, and they both worked for a while but then suddenly my imac i7 cs5 stopped working and kept crashing, my macbook continues to work just fine, ive even done a system reinstally and reinstalled os x and yes it would work for a little and then stop, they both have the same programs, whats weird is when i create a new user with admin privileges on my imac it would work fine but i deleted some files in the main account trying to fix the problem and no it wont work in the second account so here i am doing a system reinstally one last time. i called adobe they were no help at all literally, i called apple they did as much as they could i mean apple really made me feel like they tried, so here i am can anyone help?

Ok so i figured it out, the problem is my downloaded fonts from the internet. What sucks is that adobe cs4 applications ran perfectly fine with them, but now cs5 doesnt . I uninstalled my downloaded fonts and guess what?! it worked! I wonder why cs4 starts up with no problems with the same fonts and cs5 cant, thats just stupid...

I'm having trouble downloading Premiere Pro CC and after effects

I am using the cloud however the requested software is not showing up.please assist me.

Adobe's MINimums http://www.adobe.com/products/premiere/tech-specs.html
-Programs won't display if they will not install on your computer
-http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html
This is a user to user forum, I think you need Adobe
Adobe contact information - http://helpx.adobe.com/contact.html
Adobe Knowledgebase http://www.adobe.com/support/
Help for Download & Install & Setup & Activation http://forums.adobe.com/community/download_install_setup
Next link has a "Chat Now" button near the bottom
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Arbitrary data param not importing from Premiere Pro project into After Effects.

Hi,
I have an AE SDK plugin effect that works in Premiere Pro and After Effects... the effect has a bunch of standard parameters and one Arbitrary Data parameter.
I believe that the Arbitrary data parameter is implemented correctly, and I have implemented all of the cases for PF_Cmd_ARBITRARY_CALLBACK...
PF_Arbitrary_NEW_FUNC
PF_Arbitrary_DISPOSE_FUNC
PF_Arbitrary_COPY_FUNC
PF_Arbitrary_FLAT_SIZE_FUNC
PF_Arbitrary_FLAT_SIZE_FUNC
PF_Arbitrary_FLATTEN_FUNC
PF_Arbitrary_UNFLATTEN_FUNC
PF_Arbitrary_INTERP_FUNC
PF_Arbitrary_COMPARE_FUNC
PF_Arbitrary_PRINT_SIZE_FUNC
PF_Arbitrary_PRINT_FUNC
PF_Arbitrary_SCAN_FUNC
The only issue I have found, is that when importing a Premiere Pro project into After Effects with the "Import -> Adobe Premiere Pro Project" option, the value in the Arbitrary Data
parameter is always the default. There is no problem saving or re-opening projects within AE or PP... and there are no problems with cutting and pasting instances of the effect.
Importing a Premiere Pro project into After Effects using the Dynamic Link works correctly... the Arbitrary data is imported.
Thanks.

Some kind of answer would be awesome... there are Adobe staff members on here right?

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder? Thanks! bedrijfsfilm Companyfilms

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason. Anyone else got that too with Premiere Pro CC and the new Media encoder?

We have an issue when we send a film to the media encoder it crashes about half of the time for no particular reason
Anyone else got that too with Premiere Pro CC and the new Media encoder?
Lack of detailed info makes your question impossible for anyone to answer you!
eg. ...."Doctor it hurts...anyone else got something that hurts?"

How do I Import footage from Premier Pro CS3 to After Effects?

Hi
As the subject says, how do I import footage from premier pro cs3 into after effects. I'm getting rather frustrated trying to figure this out.
Via copy & paste I can copy into after effects but this copys the whole of the track on the timeline, where as I just want 10 seconds copied. The 10 seconds I want to copy is a segment & was highlighted when I clicked copy.
Also when the full track gets copied, all my edits aren't copied & I get the raw track copied???
I've googled this, tried the "Add Dynamic Link" but all I want is to copy 10 seconds of footage from premier into after effects, add my effect & then copy it back, and I can't figure out how to do this simple thing
Any help
Thanks.

I am still not getting this.
I highlight the selection I want to copy into after effects. I copy & paste it & it pastes my entire footage without any off the edits I have made.
Having searched loads for this I can find no other answer than copy & paste.
Please please could you guy be more specific with your answers as I just can't figure this one?

Importing from premiere pro cs5 to after effects cs5

hi, can anyone help me with this problem?
im editing some stuff in premiere pro cs5 and when i import it into after effects cs5 for colour correction and other effects all the transitions that i had from premiere will disappear. if someone can guide me step by step to this process it will be very helpful
Thanks,
Randolph Azzopardi

As Mylenium suggests, there are many ways to move information between Premiere Pro and After Effects.They are all outlined on this page: "Working with After Effects and Premiere Pro"
You didn't specify, but I'll assume as he did that you are exporting a Premiere Pro project from After Effects. That works by converting things from native After Effects to their equivalents in Premiere Pro; sometimes there isn't a good equivalent, so the conversion isn't perfect. The same conversion is done as is done for copying and pasting between After Effects and Premiere Pro. There's a set of tables that describe the conversions here.
The way to get perfect fidelity is to either use Dynamic Link (as Mylenium suggested) or render and export a movie from After Effects and import that into Premiere Pro.

Erratic performance / missing footage with Premiere Pro CC and After Effects CC 2014 dynamic links

Similar Messages

Maybe you are looking for