Erratic rollover problem
Hello, I have a Flex TextArea component which holds a child sprite.
This sprite draws a circle using it's graphic properties and has it's own rollover and rollout event listeners.
When I rollover this sprite which is a child of the TextArea component, I do not get smooth responses. eg. it jumps from rollover, to rollover functions erratically.
Does anyone have any advice on how to make it function smoothly ?
it jumps for rollover to rollout and then back to rollover?
Similar Messages
-
Major stroke and rollover problem.
Major stroke and rollover problem.
Muse5 CC
On images I applied 6px inside stroke in rollover state.
On rollover in both preview mode and browser previews the image moves from its top left corner and overlaps the stroke.
Both when images are place inside a blank composition or anywhere basically.
On the composition frame also 6pix stroke were applied.
HELP!
Three screengrabs to illustrate this issue.
NORMAL STATE:
ROLLOVER ON COMPOSITION
ROLLOVER ON SINGLE IMAGECan anybody from Adobe help with this???
I have the exact same problem. Very annoing, i tried everything, but no solution...
Please guys!!! -
I would appreciate assistance in resolving a rollover problem
which exists only in all versions of IE but works fine in FF,
Opera, Safari, and Chrome. You can see the page at
http://www.moriel.org/Moriel_USA/Moriel_USA.html.
This is a frameset where the rollover menu in the left
sidebar automatically loads the page in the main section to the
right. In IE it loads the rollover on the wrong line (1 below where
it should be) but still correctly loads the page on the right.
I'm sure I'm not the first to experience this but just can't
seem to locate the solution. Any help would be much appreciated.
Thanks!Pardon me for saying this but that is simply an awful way to
make a website.
It suffers from all of the usual disadvantages of frames
(there is no reason
at all for using them here), in addition to the fact that
each rollover
required an entirely new page to load in the central frame
(i.e., long -
LONG - delay).
In addition, your use of Java on one of the pages ensures
that a great many
of your visitors will not see the contents there. That,
combined with your
use of an all javascript menu in the top navigation frame -
<script type="text/javascript" language="JavaScript1.2"
src="../Scripts/MainNav.js"></script>
means that your site won't be spidered at all. Sorry - but I
think your
site layout architecture defeats the very purpose of the
site.
I don't see any rollover problem in IE7.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"NoHandleBars" <[email protected]> wrote in
message
news:gjirk2$hjp$[email protected]..
>I would appreciate assistance in resolving a rollover
problem which exists
>only
> in all versions of IE but works fine in FF, Opera,
Safari, and Chrome. You
> can
> see the page at
http://www.moriel.org/Moriel_USA/Moriel_USA.html.
>
> This is a frameset where the rollover menu in the left
sidebar
> automatically
> loads the page in the main section to the right. In IE
it loads the
> rollover on
> the wrong line (1 below where it should be) but still
correctly loads the
> page
> on the right.
>
> I'm sure I'm not the first to experience this but just
can't seem to
> locate
> the solution. Any help would be much appreciated.
Thanks!
> -
http://www.mawson.com/street/courses.html
The link above is my test page I'm working on. My rollovers
are workin fine in IE6 and FireFox. It figures that with the new MS
browser stuff stops working.
The problem is that the rollovers seem very fussy. For
example: I have rollovers on Courses & RiderCoaches. If you go
to Couses the rollover show up, but when you move the mouse over to
select the rollover it disapears. Can anyone help.
I'm using CSS:
http://www.mawson.com/street/main.css
And javascript
http://www.mawson.com/street/drop_down.jsAny help would be great
-
Hi everyone.. I am trying to create a slideshow using
disjointed rollovers. I have several (16 so far) thumbnail images
and want to display fullsize images in one common area. The
problem: as I add more images, the earlier ones become blocked from
view. It appears to have something in front of it of the same size
and shape as the images I'm using, and the same color as the
background. The use of layers doesn't seem to make a difference.
The more images I add, the more (earlier ones) become blocked.
Anyone? Thanks in advance.Here is the URL: It's not ready to be live, so may be slow.
Thanks for looking.
http://www.so-fsbo.com/ss2.htm
As for my method: I am open to suggestions for a better way
to accomplish what is seen at link, above.
But here is what I did. The exact method is (copied from
Fireworks F1):
To attach a disjoint rollover to a selected image:
Choose Edit > Insert > Slice to attach a slice to the
trigger image.
Create a new frame by clicking the New/Duplicate Frame button
in the Frames panel.
Place a second image, to be used as the target, in the new
frame in the desired location on the canvas. You can place the
image anywhere other than beneath the slice you created in step 1.
Select the image, and then choose Edit > Insert > Slice
to attach a slice to the image.
Select Frame 1 in the Frames panel to return to the frame
that has the original image.
Select the slice, hotspot, or button that covers the trigger
area (the original image) and place the pointer over the behavior
handle. The pointer changes into a hand.
Drag the behavior handle for the trigger slice to the target
slice you created in step 4.
The behavior line extends from the center of the trigger to
the upper left corner of the target slice, and the Swap Image
dialog box opens.
From the Swap Image From pop-up menu, select the frame you
created in step 2, and click OK.
Click the Preview tab to view and test the disjoint rollover. -
Hi,
I'm currently making my art website. I have a gallery page
with thumbnails around the border and when you rollover them a
bigger version appears in the centre of the page.
My problem is that even though I have put hide onload on the
larger image, when you go to the page you can still visibly see all
the large images load-up....
Anyone know how I can stop this happening?
Thanks alot!> My problem is that even though I have put hide onload on
the larger image,
> when you go to the page you can still visibly see all
the large images
> load-up....
Remove the hide onload. Select the layers in DW. Hide each
using the
Property inspector. They will load hidden.
How many layer images, and how heavy are they, by the way?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"kato_b" <[email protected]> wrote in
message
news:eca4uv$lkd$[email protected]..
> Hi,
>
> I'm currently making my art website. I have a gallery
page with thumbnails
> around the border and when you rollover them a bigger
version appears in
> the
> centre of the page.
>
> My problem is that even though I have put hide onload on
the larger image,
> when you go to the page you can still visibly see all
the large images
> load-up....
>
> Anyone know how I can stop this happening?
>
> Thanks alot!
> -
Rollover problem when page viewed in IE7
Has anyone else come across the same problem:
I have made a navigation bar that uses rollover images in
Fireworks.
The nav bar works fine when viewing the page in IE6 but when
viewed in IE7 the rollover image seems to try and shrink by one or
two pixels producing a squashed effect.
I have tested this on three different machines running IE7
and all of them produces the same problem, viewing the same nav bar
in IE6 is fine in all three.
Any advice would be appreciated.
cheers
MattMatrix16;
Can you provide an example url? Tom Unger -
Audio on button rollover problem
Very very weird problem as I have six buttons in an Edge project all have the correct audiomp3 and ogg files dragged to the stage.
4 of the files play perfectly on mouseover but two do not.
I already did the obvious:
re did the files
re imported under a different name
pulled the problematic audio and inserted that with different buttons in ANOTHER test file and STILl either the audio plays once and thats it or it plays once and then plays backwards on another mouseover.
If I have to I can upload a file as this kinda stuff really irks me.
Can I upload the file?
RFIXED IT!! Both the button image and rollover image were
saved as Buttons. Converting the rollover image to a Graphic solved
the problem. Now when I click my Pig, he turns into a juicy ham.
(Get it?) :) -
Hi,
I'm new to DW and to web development in general.
I'm building a site using a template that I purchased as a
starting point. Each page has a menu bar across the top which uses
a piece of javascript to change the menu image when the user moves
the mouse pointer over it. These rollovers work fine in both
Firefox and IE6, except...
I've created some pages which are identical except that
they're in a subfolder rather than being in the same root folder as
the index.html file. On these pages, the rollover doesn't work - if
you click the menu items the links still work, but the image
doesn't change on rollover. Thikning that it might be because the
relative location of the javascript file has changed, I've tried
moving this and putting a separet copy of the script in the same
subfolder as the html page, but it still doesn't work.
All my images are in a single subfolder which is in turn in
the site root folder. Unfortunately I can't provide a link as the
site hasn't yet been uploaded.
Grateful for any help - thanks,
RobInvestigate using a server-side include to solve your "every
menu on every
page problem"!
> 1. When I preview in IE6, my security settings stop the
menu from
> working -
> presumably this is because the "swap image" behaviour
still uses
> javascript?
This is only a local problem.
http://www.projectseven.com/support/answers.asp?id=153
And, you can delete the script reference.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Rob in France" <[email protected]> wrote in
message
news:e3fmj1$itc$[email protected]..
> Thanks, Alan. I've now got it working using the "swap
image" behaviour. It
> took
> a while because I had to do it for each menu bar on each
page (the pages
> were
> already created and populated). But it's so easy to do
with DW - I love
> this
> program!
>
> If I may ask two more questions:
>
> 1. When I preview in IE6, my security settings stop the
menu from
> working -
> presumably this is because the "swap image" behaviour
still uses
> javascript?
>
> 2. There' s a line in the code near the top of each page
that says <script
> language="JavaScript" type="text/javascript"
src="menu.js"></script>.
> Presumably this is referring to the script that was
previously being used
> to
> change the menu images, and therefore is no longer
needed? (So I assume in
> the
> interests of tidiness I can delete it and the menu.js
file?)
>
> Thanks,
>
> Rob
> -
Jumpy cursor/erratic trackpad problem and solution
I'm visiting Buenos Aires and my Macbook air has been intermittently having a problem with the trackpad. The cursor will jump around and the scroll function (2 fingers) was erratic. I tried a bluetooth mouse and it still wasn't "right".
I just figured out that it only happens with the charger is connected. This did not occur in the US but Argentina is 220V...that must be a contributing factor. I'm using the standard charger supplied with the MBA and an adapter. The plug is the type with 2 slanted prongs ... / \ .
I'll probably call Applecare when I get back to the States but thought others may be having this difficulty, so I'm posting my experience. If someone at Apple is monitoring this and forwarding it for investigation, I'd appreciate an email so I don't spend the time.To everyone with this mouse lag problem, who also has a Macbook Air,
check your processors when you have this problem. If your first core is spiking and your second seems dead, this is likely a core shutdown problem due to overheating. iStat menus, with both cores set to show, will help you see this problem when it happens. The mouse lags and so will your dock icons because your system is overheating, then to reduce heat, one of the cpu cores shuts down temporarily to reduce heat. This is a problem that is effecting many macbook air's. Do not make the mistake of thinking this is some random issue. Join the masses who know this is caused by overheating. Proper diagnosis will force Apple to fix this systemic problem.
Here here are other threads that shows how widespread this problem is.
http://discussions.apple.com/thread.jspa?threadID=1415343&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1387729&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1445521&tstart=0
hope this helps! -
Still trying to fix erratic touchpad problems
i downloaded "touchfreeze" to see if it would take care of the erratic actions of cursor and tap on my g580. It does help some. I have only had to start retyping this post one time. YAAAA!
Seriously, this is an awful problem to have on a computer. Not being able to type without stuff getting swiped, moved and pages opened.
It is by no means fixed, but it is better.
Evidently it is the tap function that causes the problem. the cursor can move around while you type; but it can't select while doing so (obviously).
If anyone has found better solution let me know.
i don't use the touchpad. But i have tried to disable it with no luck, remove the driver no luck. etc., etcl,.
Now it has swiped three or four different times just to do this post.This time i removed the elan driver and reinstalled from lenovo site and now it is working better. The elan tab under mouse settings now has a different tap (ultranav)??? Don't know what is up with that but it is better right now. As a matter of fact it hasn't messed up my typing on time while doing this!!!!!
OOOps, no, it still has issues, but getting better. I still can't belive there isn't more reported issues with this.
Now it doesn't give me the option to "disable toucpad when usb mouse enabled". Even though i would have to go in and make that setting every time i turned on the computer, it would at least disable it.
I don't know, but i sure am not ashamed to keep posting about the issue being it is so critical to
the functioning of the computer. -
Remote app on iphone with Itunes library / Erratic connection problems.
I have been using Remote app on my Iphone to manage Itunes for months with 100% pleasure and 0 trouble.
For a few days, it has some erratic behaviour like having difficulties to connect to my Itunes library.
In such case if I touch the Change Library button on Iphone remote screen, it connects quite instantly...
I have a simple wifi network generated by my adsl box and a single computer.
The remote setting option "stay connected" on Iphone is On.
Generally when I get connected if I quit remote on Iphone and restart it within a minut it will find the library in a jiffy most of times ... but sometimes not.
I disabled firewall : no change.
I scratched all remotes in Itunes and paired the Iphone again : no change.
Does anyone with some idea ?
Thanks in advance.
Jean.Almost the same issue here. And this only started yesterday.
Initially iTunes would not pair at all, but I went into add/remove programs (Win 7 PC) and ran a repair on Bonjour, Apple Mobile Devices, and iTunes. I did not remove or reinstall any of these applications.
After this my iPhone remote app would be found by iTunes, the passcode accepted, plus the library showed up. I thought I'd cracked it...
But after a few minutes - usually when the screensaver kicks in on my PC - my iPhone loses connection to my library and WILL NOT reconnect unless I restart iTunes.
I have to say that over the years the remote App is without doubt THE most buggy, inconsistent and erratic piece of software I have ever used. If there was a decent alternative I'd have ditched it a long time ago.
Looking forward to a solution from one of the experts here (not expecting Apple themselves to even respond!). -
Erratic iSight problem on MacBook Pro
The iSight camera on my MacBook Pro 17" comes and goes constantly. It vanishes from System Profiler at times too. I've rest the NVRAM and logged in as other users too. Its like it has a mind of its own. Turning on the green LED and off, then refusing to let other programs like iChat or Photo Booth from connecting, sometimes saying the camera is in use even. Its very fustrating also since I use the camera sometimes in iChat or Skype only to have the image lockup. The camera vanishes. I'm not sure if its a hardware problem or a kernel problem.
I've decided to try to monitor its failure with the HardwareGrowler.app. The camera randomly connects and disconnects. Growl notification show:
USB Disconnection
Built-in iSight
USB Disconnection
IOUSBVendorSpecifiDevice
USB Connection
IOUSBVendorSpecifiDevice
USB Connection
Built-in iSight
*Bellow is an example of what I see in my logs*
Sep 18 17:13:39 yazz-mac kernel[0]: USBF: 408.650 [0x4723a00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd000000)
Sep 18 17:13:39 yazz-mac kernel[0]: USBF: 409.376 [0x4723a00] The IOUSBFamily has successfully enumerated the device.
Sep 18 17:13:58 yazz-mac kernel[0]: USBF: 427.990 [0x4723a00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd000000)
Sep 18 17:14:02 yazz-mac kernel[0]: USBF: 432.160 [0x4723a00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd000000)
Sep 18 17:14:05 yazz-mac kernel[0]: USBF: 434.990 [0x4723a00] The IOUSBFamily was not able to enumerate a device.
Sep 18 17:14:06 yazz-mac kernel[0]: USBF: 435.809 [0x4723a00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd000000)
Sep 18 17:14:11 yazz-mac kernel[0]: USBF: 441.327 [0x4723a00] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of hub @ location: 0xfd000000)
Sep 18 17:14:12 yazz-mac kernel[0]: USBF: 442. 53 [0x4723a00] The IOUSBFamily has successfully enumerated the device.
*Some info about my MacBook Pro*
Model: MacBookPro1,2, BootROM MBP12.0061.B03, 2 processors, Intel Core Duo, 2.16 GHz, 2 GB
Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x86), 1.1.9.3
Bluetooth: Version 1.9.0f8, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Network Service: Parallels Host-Guest, Ethernet, en2
Network Service: Parallels NAT, Ethernet, en3
Serial ATA Device: ST9120821AS, 111.79 GB
Parallel ATA Device: MATSHITADVD-R UJ-846
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
*Some info from System Profiler when the camera appears to behave correctly*
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x27cc
PCI Revision ID: 0x0002
PCI Vendor ID: 0x8086
Bus Number: 0xfd
Built-in iSight:
Version: 1.84
Bus Power (mA): 500
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Computer, Inc.)
--Hello Aaton
If you have not installed any new hardware since your MacBook Pro worked correctly, it is possible that your problem may be hardware related. Because of the intermittent nature of your problem, unless the problem is repeatable when running some particular software or performing some function that could indicate possible software or device conflicts, hardware problems in your Mac seems even more likely.
Unless you get better suggestions from iNtel Mac users, here are the common solutions that help most avoid a visit to their Apple Service Technician for the "in use..." or "no camera connected" errors. You have already tried some of them, but I leave the entire list for possible use by other readers.
None of the suggestions is complicated, but the only way to find which one will work for you is to try them one-by-one until you find the one that fixes your Mac.
(0) Disconnect any unnecessary peripherals while you do your testing to rule out possible conflicts.
(1) Restart your Mac. Sometimes that is all that is required.
(2) If you use VMware Fusion to run Windows on your Mac, consider disconnecting iSight from your Virtual Machine as recommended by user "The.VCI" in this post.
(3) If you use an HP printer/scanner with your Mac, consider the "daemon" suggestions from user "parkersal" in this post.
(4) Check for any running applications, Login Items, or widgets that can use your iSight. (It is easy to forget widgets like Mirror in your Dashboard.) As explained in Apple's iSight "Your camera is in use by another application" message, iSight can be used by one application at a time.
(5) Try every suggestion re: Built-in iSight in How to Troubleshoot iSight. Be sure to include the checks for whether the problem is "application-specific" and "user-specific".
Click here if you need help creating a new user account to check whether your problem is "user-specific" during Troubleshooting.
(6) If resetting or the other troubleshooting suggestions do correct your problem, try the following:
• Backup your Home Folder, or at very least, your important files.
• Repair permissions. (Click here if you need help.)
• Then download and apply the Mac OS X 10.4.10 Combo Update v1.1 (iNtel).
• Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
(7) Some iNtel Mac laptop users have also reported success after unplugging their Macs and leaving the battery out for half-an-hour to overnight.
(8) If none of these suggestions work, contact your retailer, Apple, or your Apple-Authorized Service Provider for professional help.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight -
<mx:AdvancedDataGrid id="myDatagrid" dataProvider="{DP}" rollOverColor="{0x0066FF,0x49FFAD}">
<mx:groupedColumns>
<mx:Array>
<mx:AdvancedDataGridColumn itemRenderer="CustomComp" dataField="item" />
<mx:AdvancedDataGridColumn itemRenderer="CustomComp" dataField="qty" />
</mx:Array>
</mx:groupedColumns>
</mx:AdvancedDataGrid>
Above Example,when i rollover in datagrid lastcolor(0x49FFAD) willbe get.but I want Apply two colors for when i rollover in datagrid...Any
example,Plz clarify...rollOverColor doesn't accept multiple values by default, so you'll have to override it yourself.
or create a custom component for your item renderer, a custom canvas acting on rollOver would be a good bet
http://userflex.wordpress.com/2008/01/30/add-canvas-gradient/ -
Erratic performance problems in Oracle 8.0.x
Hi all,
We are having a performance problem that appeared somewhere between 8.0.6 and 8.1.5 when using embedded SQL and the ProC compiler under Linux and Solaris.
The moment we use client libraries > 8.0.x, things seem to grind to a halt. We are currently using 8.0.6 client against 8, 9 and 10g databases. Using 8.1.5 or 10g clients against Oracle 9 or 10 databases triggers the problem.
The problem also isn't tied to any specific query. On the latest run we tried, the timings for a specific problem query are as follows: Oracle 10 server, Oracle 8.0.6 client - 40 seconds; Oracle 10 server (same database), Oracle 10 client - 14 hours
Explain plan doesn't show anything funny with the query. On occasion, the query does get through quickly. Subsequent runs are then also quick.
The query also runs fine in SQLPlus.
What we have noticed is that the server process flatlines it at 100% CPU usage for the entire duration. The client, on the other hand is just sleeping, waiting for data from the server. Stopping the client in the debugger shows that the client is waiting in the sqlcxt() call when opening the cursor, not actually fetching data.
We are at our wits end as to where look next, and we can't stay on 8.0.6 client libraries for ever as this is starting to cause us other hassles now.
Did something significant perhaps change between 8.0.x and 8.1.x that we need to cater for in our apps?
Any help/ideas would be greatly appreciated.
Regards,
GerhardCheck Metalink
Client / Server / Interoperability Support Between Different Oracle Versions
Doc ID: Note:207303.1
Looks like Client version 8.1.5 has some problem, it was never designed to support Oracle version higher than 8.1.7
On the other hand, 8.0.6 was supported up to 9.2
I would stay with 8.0.6 if I have to use Oracle 8 client. Client version 8.1.7 seems much better.
Maybe you are looking for
-
Material num truncated while downloading the data into excel in ALV GRID
Hi, I developed a report with ALV GRID display. The reoport is having Material number as one of the column. The report shows the total 10 digit material number. When i tried to downlaod the report into an excel sheet or a TXT file, material number in
-
How to display null values in the graphs, when i select a date range?
Hi, Can you please help me in achieving the below requirement: We have a date promt, i have selected the date range from 12-Oct-2009 to 15-Oct-2009 and clicked on the go button. In the above date range, data is only availabe on 14-Oct-2009. here the
-
How to validate the input parameters in Oracle BI Publisher reports
Hi i am new to Oracle BI Publisher I am using OBI for generating simple reports. here i need validation for input parameters (Date Parameter) and also want to disable the Date filed so that user can select through the calendar component. Here validat
-
Posting multiple VAT lines through BAPI
At my customer we are importing vendor invoices from a third party system into SAP. For this we use BAPI "BAPI_INCOMINGINVOICE_CREATE1" The third party system also calculates the TAX amounts. Therefore, we need to be able to post multiple VAT lines f
-
Settle PREL WBS element to AUC
Dear, In certain cases customer wants to settle partially released WBS elements to fixed assets under construction. Is this possible? Cuurently I am having an error when settling ("System status Created is active"). However when I check the business