Erratic wireless mouse

My wireless mouse has gone erratic overnight after iMac woke up...I tried turning off the mouse then on again but connection was lost and I had to use a wired mouse to set connection up again. This worked until the next time it happened now the mouse is crazy after re-setting it's connection. Is this just batteries? the mac only a few weeks old, or faulty mouse? the mouse and

I have the same issue as you do with the wireless mouse. Many times after waking from sleep, it will begin jumping all over the screen without me even touching it. If I try to use it it will continue that and after a while just function normally. Sometimes a reboot of the system works to get it to stop others it just continues. I have changed batteries as well. I haven't tried to blue tooth anything but the mouse and keyboard, so don't fret over that being the cause. Have you done anything else or spoken to apple about it? Please update anything else you find out.

Similar Messages

  • One buttom wireless mouse makes astounding leaps

    Anyone elso had/resolved a problem with the original one button wireless mouse from Apple, where sometimes the cursor leaps, in a single bound, to either the top left or bottom right corner of the screen?
    This happens just every so often (maybe five times a day), in the middle of 'normal' mouse operation. Otherwise the wee sleekit, couring, timorous beastie behaves like a good little mouse.
    The mouse in qustion has just celebrated its 14th month of mouseness.

    Well, in my case it happened much more often, but the surface of the table was the apparent cause for my erratic mouse-jumping. I "fixed" it by taping a piece of standard, non-glossy A4 to the tabletop as a mousing surface.
    Hope it helps!
    Cheers,
    B.

  • Track pad / wireless mouse does respond moves around jittery opening things

    Trackpad and wireless mouse jittery bounces around on screen opening programs
    And won't respond to inputs

    Hi Misterwarbucks,
    Here are two articles that will help you address these issues with your mouse and trackpad behavior:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    http://support.apple.com/kb/ts1449
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Erratic magic mouse behavior

    Will anybody ever be able to decipher what the specific causes are for the erratic behavior of Apple's Magic Mouse? Personally I think it boils down to the Bluetooth Signal itself that can cause a lot of this erratic behavior, like in sudden sluggishness of movement. I see this behavior comes and goes as if some invisible force has suddenly intervened. My best guard against erratic behavior is to have the computer as close to the mouse as possible, even a foot or two. The further out the computer gets the more erratic behavior is likely, but like I said, even then it "comes and goes." Do you think it is the Bluetooth signal itself, because sometimes when it's become erratic I move the computer around, even which way it faces in relation to the mouse and I can suddenly "lock on" and the mouse returns to normal, only to have it start acting up again in a few hours or later on in the day or week or whatever. That's why I say the signal itself is suspect because I can effect the behavior by moving the computer around. Maybe the signal is effected by other components in the room like my TV or Audio Equipment or WIFI signals or remote controls. 
    I love my Magic Mouse and that is why I have put up with this erratic behavior struggle I'm constantly/periodically having, but I do wish this problem could be eradicated altogether and i could just use the mouse like it was intended. Incidentally, this is a brand new mouse I'm currently using that is at issue. All my other Magic Mouse have also done this exact same behavior.

    Hi, thanks for the reply. Yes I'm running Yosemite 10.10.3. I'm certain much of what you posted is definitely a likelihood for some of the issues. I have a lot of electronic equipment in this house, and yes, smart tv's connected to WIFI as well as other computers throughout the house. Apple of course does not mention any of this as possible issues as far as I know, the public, like myself, just assumes all will be wonderful. I know there are more like me out there if I'm having these consistent problems with all the Magic Mouses' I've owned. It really is attacking it from the SIGNAL side of things because I think that is the only issue that's going on. If it were addressed more, maybe even scientifically, maybe we could say, "well don't put it here, this can cause problems, and that TV, keep such and such a distance." Those are the types of guidelines that would be so helpful. But from what I'm seeing none of that is addressed at all (or for the most part). Anyway, I really want the wireless mouse world (specifically the Magic Mouse) to thrive. Every time I hook up a wired mouse I really feel the step back I'm taking and it's too painful! I've even went to the point, and I'll do it again if need be, of having my computer (Mac Mini) 2 inches from the Magic Mouse, that's when it operated at its very best. My only problem with that is it's somewhat impracticable, and I really don't think I should have to do that to have it work consistently.  Anywho, my two cents worth.

  • Why is my new wireless mouse jerky on my macbook pro?

    I've been using a cheap Dynex wireless mouse (as well as a wired mouse when I'm at work) on this MacBook for a while with no problems whatsoever. The Dynex's buttons are starting to malfunciton, so I went to buy a new mouse....
    1st try -- I got some cheap Microsoft mouse from Best Buy. The movement was very erratic and jerky. I downloaded and installed the mouse software and adjusted settings there, to no avail.
    2nd try -- I bought a slightly more expensive Logitech M510 wireless mouse. It felt slightly different, but the result was essentially the same. The movement is jerky -- erratic. Sometimes, the mouse jumps inches across the screen instead of moving in a slow steady manner like it's supposed to. It appears to worsen when I boot up and play a game on the computer.
    Given the fact that the same problem occurred with two different new mice, but not with the old worn-out one, I must assume that  there is some incompatability between MacBook Pros and newer models of wireless mice. I can't seem to find any consistent "known issue" pages on this. Anyone know what I should do now? Any ideas?
    MacBook Pro
    15-inch, Late 2011
    Processor: 2.2 GHz Intel Core i7
    Memory: 8GB 1333 MHz DDR3
    Graphics: Intel HD Graphics 3000 512 MB
    Software: Mac OS X Lion 10.7.5 11G63b)

    The wireless mice you're buying.... are they 2.4GHz wireless ones (the ones that come with their own micro-dongle) or Bluetooth?  If they're the 2.4GHz wireless ones, go buy yourself a good bluetooth one.  Your Mac has bluetooth in it and can connect to one of these mice without the need to use the dongle that comes with them.  I've seen a quite a bit of issues (jerky movement due to low battery too far away or other movement problems) with the non-bluetooth wireless ones.
    Also, be aware that if the mice you're using are laser based, the movement will be laggy and jerky if they're not used on the proper surface.  Only the more expensive ones have better laser systems in them that can be used on multiple surfaces, but still not all.

  • Wireless mouse lock-ups (Rapoo 1620)

    Hi,
    I've been using my wireless mouse more recently (Rapoo 1620) on  my 64-bit installation of Arch Linux (64-bit, using XMonad), and it generally works okay but with a frequent slightly annoying issue - it tends to stop working after I switch to typing on my keyboard then try to use my mouse again. Once it does start working, as long as I keep using it it will very rarely (if at all - I can't entirely recall) lock up again - only after I go back to using the keybaord and my mouse remains inactive for a period of time.
    Has anyone come across this issue before? Any insight would be greately appreciated.
    Thanks!

    I would be concerned that you may have a power supply going bad. Unfortunately the only way to test this theory is to replace it. If you do replace it may sure you get one that is rated at a high enough wattage to supply your system. I use a 500 watt power supply. I have had power supplies to go bad on me in the past. Sometimes the power supplies will not go entirely out, they just stop producing as much power as they normally would. This can cause some weird things to happen in your system. I've had one go bad and it was providing enough juice to let my computer cut on, but the video card wasn't getting enough?juice to operate thus I was getting a blank screen. I would also like to know if you are overclocking. Sometimes overclocking can cause heat issues that could cause a similar problem to what you are having.

  • When i wake my iMac there is no wireless mouse or keyboard functionality. I have to reboot the computer to make them work.

    If my imac is left sleeping for any length of time there is no wireless mouse or keyboard functionality and the imac keeps returning to sleep. I have to hold the power button to wake the machine as the mouse and keyboard do not work. T o rectify the problem i have to hold the power button until the mac switches off and then re-boot the machine.

    Don't sleep the computer and its HDs, just the display. I've been doing that for years, run 24/7, and never have an issue, but then again I only use wired keyboards and mice.

  • Macbook Pro Retina (15") can't connect to wireless mouse and external USB keyboard

    Hi All,
    I got my new MacBook Pro Retina (15 inch) about 3 weeks ago. It works fine. I got a 30" Dell screen that I am using via thunderbolt/usb adapter. Also, I am using a thunderbolt ethernet adapter. Both adapters work fine without any problems.
    I have an apple usb keyboard connected to the USB hub of the screen, as well as my iphone cable. It is a regular, full size apple keyboard. In addition to this, I have a logitech nano connected directly to the right usb port of the macbook pro.
    This setup was working well until a few days ago. I lost connectivity with my mouse. Initially, I thought the batteries are empty. After replacing them, I still had no connection (again, the usb receiver is *directly* connected to the macbook).
    I changed a few cables here and there and noticed that I can get either the keyboard to work or the mouse but not both at the same time. A reboot did not help.
    Did anybody encounter such a strange problem already? If so, what could I possibly do?
    Thank You,
    --Martin

    Hello nikkig00,
    It is certainly difficult to use the computer if your wireless keyboard and mouse do not connect.  I found a few resources I recommend for this issue.
    I recommend reviewing this article first:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    If the issue persists, I recommend reviewing the section titled "Top troubleshooting tips" in the article below.  Step 9 specifically stands out to me for the issue you described:
    9. Restart your computer
    Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
    Bluetooth Quick Assist
    http://support.apple.com/kb/ht1153
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Wireless mouse/keyboard intermittent dis-connects

    In the last three days, I have looked at over 20 different posts regarding wireless mouse/keyboard disconnect problems. Thew fixes ranged all over the board and NONE fixed it. And, none of these problems matched mine exactly, except for one other. I too, have two iMacs and this problem has over the last few days gotten increasingly worse and irritating. Regardless of what you're doing, whether it is actual productive work, or playing a stupid game on your computer, when your mouse quits responding, and the graphic flashed on the screen "MOUSE DISCONNECTED", it irritates.
    I think a senior apple tech finally pin-pointed the problem, at least for my two systems. It has nothing at all to do with Bluetooth or Wireless networking. I tried ALL of those fixes including resetting the SMC. None fixed it.
    Here is what the tech had me do. Under System Preferences > Users & Groups > My Login, I then clicked on "Login items. I was astounded to see a list that exceeded the size of the window of "startup" programs that have been installed from iTunes Helper, to Dropbox to blah, blah, blah. You name it. He had me remove ALL of them except iTunes Helper. one item "Connect service (all users) could not be removed. However, as we later discussed, the specific item the I believe to be the culprit was "Bittorrent". I've forgotten what I downloaded that used that as the download agent, but in the future, I shall NEVER AGAIN use it for ANY reason. I also removed from the applications area, some non-used programs (that probably weren't the problem, but...), emptied the trash, re-booted and have not had the problem since. I want to stress here, that if your problem is actually Bluetooth or Wireless network related, this will not fix it. However, my mouse had gotten really molassesy in that when I would try to quickly move from one spot to another on the screen, it took some time to catch up, as if something else had control. That's what I think Bittorrent or someone trying to share one of my files was causing. I don't share my files. Period. I didn't realize that it could be subverted to that use of I wouldn't have ever used it in the first place.
    Anyway, neither one of my iMacs has exhibited ANY of the former symptoms since clearing that list on each system. Turns out, my second iMac also had Bittorrent in the list. That's about the only thing the two have in common besides Yosemite 10.10.3. Maybe this will help, maybe it won't. I sure hope it does. Forums like this one are extremely helpful to me.

    I had the same problem... didn't find anything useful in the forums.  Just on a whim, I went to the
    Control Panel | Device Manager | Universal Serial Bus Controllers
    For each "Hub", right click and select "properties"
    On each properties page, select "Power Management" tab
    On each power management tab "uncheck" the "Allow the computer to turn off..."
    I did this for the Generic USB Hubs, the USB Root Hubs, and the Reneasas...Hub.   After that was completed, all USB ports started working immediately.  So far, they are staying working but it has only been an hour or so.   Will report back if this doesn't stick.    Also, there may be a more elegant solution... but this works for now.

  • Wireless Mouse disabled

    My MBP throws an error everytime I connect my Wireless Mouse USB to it and I could see that the device is disabled and doesn't work any more on any machines connected.
    Here is the error message I got: "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    Mouse: Targus AMW063AP
    Any ideas on how to get it working?
    Thank you in advance.

    Try Resetting the System Management Controller (SMC)

  • Apple Wireless Mouse - No Longer Pairs with Mac Mini?

    Hi there,
    I've had an Apple Wireless Keyboard and an Apple Wireless Mouse for several months. Unfortunately, the Apple Wireless Mouse no longer pairs with the Mac Mini (Core Duo, 1.66) -- it is getting very frustrating.
    I've tried rebooting the machine, restarting the mouse, and nothing works. Sometimes I get the Bluetooth Setup Assistant which says that it found 1 Mouse, but it failed to pair.
    I replaced the batteries, but nothing changes.
    Help!

    Normally that's caused by debris under the trackball preventing the rollers from moving.  Turn the mouse upside down and rub the trackball Vigorously with a microfiber cloth. 
    The symptoms are usually that scroll will work one direction but not the other.
    Captfred

  • Why is my boot camp setup stuck at Apple Wireless Mouse?

    Well I finally got Windows 7 on my Macbook Pro and when I try to put Bootcamp on the Windows side it gets stuck at the instalation. It's been on Apple Wireless Mouse for a good bit now. Did I mess up somehow?

    The wireless mice you're buying.... are they 2.4GHz wireless ones (the ones that come with their own micro-dongle) or Bluetooth?  If they're the 2.4GHz wireless ones, go buy yourself a good bluetooth one.  Your Mac has bluetooth in it and can connect to one of these mice without the need to use the dongle that comes with them.  I've seen a quite a bit of issues (jerky movement due to low battery too far away or other movement problems) with the non-bluetooth wireless ones.
    Also, be aware that if the mice you're using are laser based, the movement will be laggy and jerky if they're not used on the proper surface.  Only the more expensive ones have better laser systems in them that can be used on multiple surfaces, but still not all.

  • Wireless mouse and keyboard not recognized

    I know that I have had this issue before, but can't remember what the solution is (old age?) My iMac G5 PPC has a wireless mouse and keyboard (the old apple white one). The iMac came with these as an option but WITHOUT the bluetooth card inside. (I still don't know how this works, but it does). Anyway, the mouse and keyboard were not recognized when I tried to get on today. The batteries are good. If I go to system prefs (using an even older wired mouse) there is no bluetooth option (since no card is present). I don't know how to get the computer to try to recognize both. Any help is definitely appreciated.

    HI David,
    If the iMac didn't come with Bluetooth software/hardware, then are you using a USB Bluetooth dongle?
    And open System Profile (Applications/Utilities)
    Select Bluetooth on the left under Hardware. You may need to click the gray disclosure triangle so it faces down. What does it say on the right?
    If the Bluetooth icon is in your Status Menu Bar (top right in your screen). Click the icon and make sure Bluetooth is turned on. Then click: Open Bluetooth Preferences and try re-pairing the mouse and keyboard.
    Carolyn

  • Wireless Mouse and Keyboard don't work under bootcamp. Any suggestions?

    I installed Windows 7 through Boot Camp. Everything works, but my wireless mouse and keyboard. If I add a wired mouse and keyboard, they work. Have reinstalled Bootcamp a few times, but when I try and add the devices. they are seen, but then can't pair.
    Any help would be appreciated.

    Well, the 'unplugged' reference was noted earlier and I wasn't sure if you'd get a
    better response than a standard suggestion to try the other ideas in this link first
    •Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    before actually performing the SMC, that is a dragnet kind of catch-all, sometimes.
    All of my keyboard & mouse units are USB and I've gone as far as supplying the
    mouse and other peripherals with a powered USB hub; so power from the Mac
    isn't spread too thin. The keyboard is one of the only items that should be attached
    to the USB port; as it has to work on startup pre-boot keyboard shortcuts... Such
    as SafeBoot, PRAM reset, and others where you need a live keyboard and BT
    may not be up to the task of being ready. Three going on four of my Macs have
    bluetooth capabilities for those items; but I can't justify the continual upkeep cost.
    Spare USB keyboards and a few extra mouse are handy as troubleshooting tools, too.
    There are some USB keyboard references among search results in this linked page:
    https://www.google.com/?gws_rd=ssl#q=Apple+USB+keyboard+troubleshooting
    Perhaps the SMC pre-reset suggestions may help resolve the issue, if not, try reset.
    Good luck & happy computing!
    edited

  • Bluetooth can't connect to wireless mouse

    After working flawlessly for two years, now my iMac no longer connects to the wireless mouse and keyboard that came with it. I changed the batteries in both to no avail. A US̆B mouse works fine. What could be causing this?

    Hello nikkig00,
    It is certainly difficult to use the computer if your wireless keyboard and mouse do not connect.  I found a few resources I recommend for this issue.
    I recommend reviewing this article first:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    If the issue persists, I recommend reviewing the section titled "Top troubleshooting tips" in the article below.  Step 9 specifically stands out to me for the issue you described:
    9. Restart your computer
    Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
    Bluetooth Quick Assist
    http://support.apple.com/kb/ht1153
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Relinking error while patching in apps 11.5.10

    Hi All, I was trying to apply a patch 4712852 and I am getting the following error message Done relinking module WSCMTI in product wsm Relinking module 'WSCMTM' in product wsm ... make -f /d01/oracle/visappl/admin/VIS/out/link_wsm_25711.mk /d01/oracl

  • In-app purchase for single section of a publication?

    Hi, there are a system to set an in-app purchase to every article of a magazine using "sections" option? or you must publish every article as a single issue? Thanks in advance for the answer. Claudio

  • AppleScript PhotoShop Resize Times Out?

    Hi all, I've found what seems to be a pretty decent image resize applescript to use with photoshop cs3, but every time I try to use it, it just hangs on the sizing image dialog box. Anybody have any suggestions? tell application "Adobe Photoshop CS3"

  • Two WRT610N Routers Which One to Keep, Which One to Return?

    For Christmas I received two WRT610N routers as gifts.  While the model number is the same they appear to be different versions, or at least in different packaging. The first one is in an all blue box and is called N Ultra Range Plus Simultaneous Dua

  • CSS11506 - configuration for telnet

    Greeting, I want create two web farms, and one for testing and one for real production on L3 load balancing. The testing farm will need four machines and every machine need can be telneted by the user who is on our public network. The two web farms a