Erratically not able to connect to one particular network

This problem suddenly started at the office I work at with on their wireless network. I have made no changes to anything system-wise. Yesterday it began with alternating between picking up the network, with full signal but no actual connection, or having to manually connect w/password and getting "server timeout" or "connection failure" problem. There are no firewalls or proxies that anyone here knows of, and again, the problem just suddenly started happening out of nowhere.
This morning booted up and picked it was fine again for 10 minutes, then same problem again, it cut out. Tried various superficial things(turning Airport on/off, manually trying to connect) then rebooted and now it is connecting again. Who knows for how long.
I had a similar problem with Airport (I am assuming for now the problem is Aiport) on a previous MBPro, randomly not "working," and now the same, but only with certain networks.
I haven't the foggiest idea how to troublehoot this, and there isn't really an IT person here (outside consultant-$, and all Windows people anyway). I assume taking it to the Apple Store would not be useful b/c the problem is with this one network (it seems) here, not there.

Similar Messages

Not able to connect to wifi wpa2 networks in lenovo vibe x2

Not able to connect to wifi wpa2 networks in lenovo vibe x2. It displayed saved.but not connecting. It connects to open and WEP wifi networks. Please help

Are you trying to connect to a 2.4GHz or a 5GHz network?
What encryption is your router set to use : AES,TKIP/AES,..?
Have you tried to unplug the router from the power source for 2-3 minutes->Plug it back in-> Wait until it establishes an Internet connection-> Try to recreate the phone connection.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have an iPad with iOS 5.0.1 that is not able to connect to cisco wireless networks at work.

Hi, I have an iPad that is not able to connect to any of the Cisco wireless access points at work. The iPad is on the latest iOS 5.0.1. I did a reset on the iPad and erased all content and settings. The wireless network I'm trying to connect uses WPA2 Enterprise encryption. I'm able to connect to a Verizon mifi device so I know wireless is working. It seems like it's just not getting the certificate. I'm able to connect to our wireless network from other iPads just fine except for this one device. Please let me know if there is anything else I can do to troubleshoot the issue. Thank you.
Julio

I suggest updating using iTunes on your computer (current version: 11.0.3).
Update iOS first, then apps.

My iPhone 3G is not able to connect to any wifi network

my iPhone 3G is not able to connect to any wifi network

Hi- Yes I tried manually adding the network (even deactivated password requirements on my home network but still doesn't work.)
I was reading another thread that has similar headline - seems the issue is with the upgrade to software iOS4 on a 3G. Folks have been able in some cases to get replacement phones. Seems issue is isolated to XP version. I have a MAC at home, so I will try to restore (yet again) on that computer and see if I can use it, otherwise I guess I'll go plead my case at the Genius Bar
Thanks on the responses. See "Wifi not working after updating to OS4 on iphone 3g" for more specifics.

WRT51AB - Not able to connect to one site when accessing thro router

When I am trying to access a particluar website directly via cable modem using ethernet cable, I am able to access the website. However if I connect the wireless router to the modem and then try to access the website using wireless connection, I am not able to access the site.
Any ideas?
Any help will be appreciated.
Thanks
Sonia

Are you able to go online using wireless router?? Logon to router’s setup page and try changing wireless channel to 11, go to advanced wireless settings and reduce beacon interval to 50, reduce fragmentation and RTS threshold to 40 by each, try upgrading latest firmware on the router… also let me know which web sites you are trying to access?? Is it secured websites?

Bridge NOT able to connect to one server and send message

I have configure JMS bridge between MQ queue and a distributed queue ( which is targeting JMS servers in a cluster ).
Bridge is able to connect to all servers and transfer messages, except one.
Messages arriving on the MQ queue are delivered by the JMS bridge to all the JMS servers except one
We turned on debug on MessagingBridge on affected server and got the error msg in the attached log.
Following is the exception strace:
<Jan 21, 2010 7:22:19 PM EST> <Warning> <MessagingBridge> <BEA-200026> <Bridge "TsysTIPSBridge" encountered some problems in one of
its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The excepti
on caught was java.lang.Exception: javax.resource.ResourceException: Error sending message
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1470)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:714)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
-------------- Linked Exception ------------
javax.resource.ResourceException: Error creating producer or sending message
at weblogic.jms.adapter.JMSBaseConnection.throwResourceException(JMSBaseConnection.java:1470)
at weblogic.jms.adapter.JMSBaseConnection.sendInternal(JMSBaseConnection.java:815)
at weblogic.jms.adapter.JMSBaseConnection.access$200(JMSBaseConnection.java:84)
at weblogic.jms.adapter.JMSBaseConnection$6.run(JMSBaseConnection.java:707)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:704)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
-------------- Linked Exception 2 ------------
javax.jms.MessageNotWriteableException: MQJMS0008: JMS Client attempts to write a read-only message
at com.ibm.jms.JMSMessage.newMessageNotWriteableException(JMSMessage.java:4782)
at com.ibm.jms.JMSMessage.setStringProperty(JMSMessage.java:5738)
at weblogic.jms.client.WLProducerImpl.send(WLProducerImpl.java)
at weblogic.jms.adapter.JMSBaseConnection.sendInternal(JMSBaseConnection.java:773)
at weblogic.jms.adapter.JMSBaseConnection.access$200(JMSBaseConnection.java:84)
at weblogic.jms.adapter.JMSBaseConnection$6.run(JMSBaseConnection.java:707)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.send(JMSBaseConnection.java:704)
at weblogic.jms.adapter.JMSConnectionHandle.send(JMSConnectionHandle.java:144)
at weblogic.jms.bridge.internal.MessagingBridge.onMessageInternal(MessagingBridge.java:1325)
at weblogic.jms.bridge.internal.MessagingBridge.onMessage(MessagingBridge.java:1251)
at weblogic.jms.adapter.JMSBaseConnection$29.run(JMSBaseConnection.java:2070)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jms.adapter.JMSBaseConnection.onMessage(JMSBaseConnection.java:2066)
at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:2969)
at com.ibm.mq.jms.SessionAsyncHelper.run(SessionAsyncHelper.java:406)
at java.lang.Thread.run(Thread.java:595)
I am new to JMS
Please help

What version of WebLogic and MQ are you using?
Have you ensured that the target Destination and Connection Factory are both WebLogic artifacts (neither should reference an MQ resource)?
Tom

Not able to connect to wi-fi networks

Two months ago I bought an iPad mini, I brought it home and the wi-fi worked juts fine, until last week. I went on vacation and the first day at the hotel the wi-fi worked, the next day out of the blue the wi-fi was not working, my computer was and my iphone was too. My ipad didn't work for the rest of the week, which was highly annoying. I got home yesterday and my iPad is still not working with my wi-fi, when it used to worked just fine. what should I do????

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

SES web crawler not able to connect to a particular URL, fetching fails

Using Linux64Bit SES 11.1.2.0
With Crawling depth - 5
Web crawler has been created on "http://www.advancedinnovationsinc.com"
Document fetching is getting failed at the depth 2.
I have enabled the DEBUG logging from which I got to know that all the URL which is on depth 2 or more are getting *"HTTP/1.1 400 Bad Request"* error.
So is this the SES product issue or the usage problem
Below is the snap shot of generated log.
01:43:16:054 INFO filter_0 urlString:http://www.advancedinnovationsinc.com/../index.html
01:43:16:054 INFO filter_0 hostname :www.advancedinnovationsinc.com
01:43:16:054 INFO filter_0 filepath :/../index.html
01:43:16:054 INFO filter_0 Port :-1
01:43:16:054 INFO filter_0 useSSL :false
01:43:16:054 INFO filter_0 useProxy :true
01:43:16:054 INFO filter_0 ==== DEBUG==== ------ New readWebURL ENDS ----------
01:43:16:304 INFO filter_0 ==== DEBUG==== m_header:[Ljava.lang.String;@122b7db1
01:43:16:304 INFO filter_0 ==== DEBUG==== statusLine:HTTP/1.1 400 Bad Request
01:43:16:304 INFO filter_0 ==== DEBUG==== start:9
01:43:16:304 INFO filter_0 ==== DEBUG==== statuscode:400
01:43:16:304 INFO filter_0 ==== DEBUG==== URLAcess.java:2232
01:43:16:321 INFO filter_0 EQG-30009: http://www.advancedinnovationsinc.com/../index.html: Bad request
01:43:16:321 INFO filter_0 Documents to process = 7
01:43:16:329 INFO filter_0 ==== DEBUG==== m_currentURL:http://www.advancedinnovationsinc.com/../create.html
01:43:16:329 INFO filter_0 ==== DEBUG==== m_urlString:http://www.advancedinnovationsinc.com/../create.html
01:43:16:329 DEBUG filter_0 Processing http://www.advancedinnovationsinc.com/../create.html
01:43:16:329 INFO filter_0 ==== DEBUG==== ------ New readWebURL STARTS ----------
01:43:16:329 INFO filter_0 urlString:http://www.advancedinnovationsinc.com/../create.html
01:43:16:329 INFO filter_0 hostname :www.advancedinnovationsinc.com
01:43:16:330 INFO filter_0 filepath :/../create.html
01:43:16:330 INFO filter_0 Port :-1
01:43:16:330 INFO filter_0 useSSL :false
01:43:16:330 INFO filter_0 useProxy :true
01:43:16:330 INFO filter_0 ==== DEBUG==== ------ New readWebURL ENDS ----------
01:43:16:736 INFO filter_0 ==== DEBUG==== m_header:[Ljava.lang.String;@122b7db1
01:43:16:736 INFO filter_0 ==== DEBUG==== statusLine:HTTP/1.1 400 Bad Request
01:43:16:736 INFO filter_0 ==== DEBUG==== start:9
01:43:16:736 INFO filter_0 ==== DEBUG==== statuscode:400
01:43:16:736 INFO filter_0 ==== DEBUG==== URLAcess.java:2232
01:43:16:738 INFO filter_0 EQG-30009: http://www.advancedinnovationsinc.com/../create.html: Bad request

Using Linux64Bit SES 11.1.2.0
With Crawling depth - 5
Web crawler has been created on "http://www.advancedinnovationsinc.com"
Document fetching is getting failed at the depth 2.
I have enabled the DEBUG logging from which I got to know that all the URL which is on depth 2 or more are getting *"HTTP/1.1 400 Bad Request"* error.
So is this the SES product issue or the usage problem
Below is the snap shot of generated log.
01:43:16:054 INFO filter_0 urlString:http://www.advancedinnovationsinc.com/../index.html
01:43:16:054 INFO filter_0 hostname :www.advancedinnovationsinc.com
01:43:16:054 INFO filter_0 filepath :/../index.html
01:43:16:054 INFO filter_0 Port :-1
01:43:16:054 INFO filter_0 useSSL :false
01:43:16:054 INFO filter_0 useProxy :true
01:43:16:054 INFO filter_0 ==== DEBUG==== ------ New readWebURL ENDS ----------
01:43:16:304 INFO filter_0 ==== DEBUG==== m_header:[Ljava.lang.String;@122b7db1
01:43:16:304 INFO filter_0 ==== DEBUG==== statusLine:HTTP/1.1 400 Bad Request
01:43:16:304 INFO filter_0 ==== DEBUG==== start:9
01:43:16:304 INFO filter_0 ==== DEBUG==== statuscode:400
01:43:16:304 INFO filter_0 ==== DEBUG==== URLAcess.java:2232
01:43:16:321 INFO filter_0 EQG-30009: http://www.advancedinnovationsinc.com/../index.html: Bad request
01:43:16:321 INFO filter_0 Documents to process = 7
01:43:16:329 INFO filter_0 ==== DEBUG==== m_currentURL:http://www.advancedinnovationsinc.com/../create.html
01:43:16:329 INFO filter_0 ==== DEBUG==== m_urlString:http://www.advancedinnovationsinc.com/../create.html
01:43:16:329 DEBUG filter_0 Processing http://www.advancedinnovationsinc.com/../create.html
01:43:16:329 INFO filter_0 ==== DEBUG==== ------ New readWebURL STARTS ----------
01:43:16:329 INFO filter_0 urlString:http://www.advancedinnovationsinc.com/../create.html
01:43:16:329 INFO filter_0 hostname :www.advancedinnovationsinc.com
01:43:16:330 INFO filter_0 filepath :/../create.html
01:43:16:330 INFO filter_0 Port :-1
01:43:16:330 INFO filter_0 useSSL :false
01:43:16:330 INFO filter_0 useProxy :true
01:43:16:330 INFO filter_0 ==== DEBUG==== ------ New readWebURL ENDS ----------
01:43:16:736 INFO filter_0 ==== DEBUG==== m_header:[Ljava.lang.String;@122b7db1
01:43:16:736 INFO filter_0 ==== DEBUG==== statusLine:HTTP/1.1 400 Bad Request
01:43:16:736 INFO filter_0 ==== DEBUG==== start:9
01:43:16:736 INFO filter_0 ==== DEBUG==== statuscode:400
01:43:16:736 INFO filter_0 ==== DEBUG==== URLAcess.java:2232
01:43:16:738 INFO filter_0 EQG-30009: http://www.advancedinnovationsinc.com/../create.html: Bad request

Not able to connect wifi after ios5 upadate

Hi i updated my ipod with ios 5 after updation is successfully done i am not able to connect with my wifi network. the thing is my i pod is getting connected with my system but when open safari it shows error msg like this "Safari cannot open the page it is not connected to the the internet".

Reboot your phone. Hold down the sleep/wake button and the home button until the apple logo pops up and if that doesn't work then reset network setting (general>reset) and then another thing is to go to other and add it from there

Able to connect keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please

Hello,
I am able to connect my wireless keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
thanks,

Hello:
You will need to delete the keyboard from the other Mac. Simply disconnecting it leaves it still paired with the first Mac.
Barry

JMS adapter: JNDI not able to connect to TIBCO server.

Hi All,
We are facing a strange problem here related to JMS adapter. We are trying to connect to TIBCO using JMS adapter.
We have 3 different Business Services, all the three using JMS channels. All the JMS channels are connecting to the same server on same port 7222. We have every thing same in all the JMS channels except the Que Name and the queue/log on user.
All the channels under 1 particular services are working fine while under the other two are giving below error:
===========================================
Channel error occurred; detailed error description: com.sap.aii.adapter.jms.api.connector.ConnectorException: Error looking up connection factoryQueueConnectionFactory, for profile: ConnectionProfile of channel: <Interface name> on node: <server node> having object id:<Object ID>: javax.naming.ServiceUnavailableException: Failed to query JNDI: Failed to connect to any server at: tcp://<host1>:7222, tcp://<host2>:7222<br> at com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createConnectionFactory(JndiConnectorImpl.java:135)<br>
=============================================
Below are the basic JMS configuration:
1. QueueConnectionFactory
2. com.tibco.tibjms.naming.TibjmsInitialContextFactory
We are on PI 7.0 and working with both Sender and Receiver JMS adapters.
Looking for your help.
Regards,
Rahul

HI,
Please reply me for this question, or to the other one JNDI not able to connect . Both aer one and the other are same.
--Khaleel

Not able to connect iPlanet Proxy on ADMIN port with windows 2003

I have configured iPlanet 3.6 on Windows 2003 server with admin port as 10000 and Client connection on port 8000.
I m Able to use client port thru 8000 but when i goto particular URL i.e http:\\I.P:10000 it do ask for admin user name aND password.. and after that it show "page cannot be displayed" .. where as if i try on same server to connect to admin panel thru netscape . once it ask the user name password for iPlanet and after that is keeps asking user name password in WINDOWS STYLE.. liek some time it ask for IIS .. i dont know why and overall i am not able to connect to it on admin port ..
pls provide some solution if any one have faced similar problem..

I would strongly advise you to consider 4.0.2 version of proxy, 3.6 is not ofiicially supported on windows 2003, see http://docs.sun.com/source/819-3619-10/relnotes36sp8_win.html#wp19243
Speaking of possible workarounds for your issue with 3.6, I've seen admin console acting weird when it is configured with 5 digit port. Changing it to 4 digits might be worth a shot.

Reporting Services not able to connect with sharepoint

HI
We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion that not able to connect to the reporting services.
Request you to throw some light on the same.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Hi Geeth,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
your SQL Server and SharePoint? It is benefit for us to do further analysis.
References:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Not able to connect to a queue under a foreign server.

Not able to connect to a queue under a foreign server.
I'm using WebLogic Server Version: 10.3.3.0. The foreign server is running, and can be pinged from this local server. Also the port where queue resides on foreign server, can be accessed through the my local server.
OS used is AIX 6.0 on both servers.
Tried restarting the local server but nothing helps. Same error continues.
HAS ANYBODY FACED THIS PROBLEM? WHAT IS THE CAUSE AND SOLUTION FOR THIS?
It throws following errors:
<Jun 25, 2012 12:14:15 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
javax.naming.NoInitialContextException: Failed to create InitialContext using factory specified in hashtable [Root exception is java.lang.ClassCastException: Expected RemoteException, RuntimeException, or Error but received: 'java.io.IOException: RJVM has already been shutdown']
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:247)
     at javax.naming.InitialContext.initializeDefaultInitCtx(InitialContext.java:318)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:348)
     at javax.naming.InitialContext.internalInit(InitialContext.java:286)
     at javax.naming.InitialContext.<init>(InitialContext.java:211)
     at weblogic.deployment.jms.ForeignOpaqueReference.getReferent(ForeignOpaqueReference.java:179)
     at weblogic.jndi.internal.WLNamingManager.getObjectInstance(WLNamingManager.java:96)
     at weblogic.jndi.internal.ServerNamingNode.resolveObject(ServerNamingNode.java:377)
     at weblogic.jndi.internal.BasicNamingNode.resolveObject(BasicNamingNode.java:856)
     at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:209)
     at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
     at javax.naming.InitialContext.lookup(InitialContext.java:436)
     at weblogic.jms.common.CDS$2.run(CDS.java:503)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.jms.common.CrossDomainSecurityManager.runAs(CrossDomainSecurityManager.java:130)
     at weblogic.jms.common.CDS.lookupDestination(CDS.java:497)
     at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:276)
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1455)
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1252)
     at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1320)
     at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:493)
     at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:531)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:157)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.ClassCastException: Expected RemoteException, RuntimeException, or Error but received: 'java.io.IOException: RJVM has already been shutdown'
     at weblogic.common.internal.BootServicesStub.getMsg(BootServicesStub.java:34)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     at weblogic.security.acl.internal.RemoteAuthenticate.authenticate(RemoteAuthenticate.java:90)
     at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRemotely(WLInitialContextFactoryDelegate.java:746)
     at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:678)
     at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:469)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:239)
     ... 46 more
>
<Jun 25, 2012 12:14:15 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
Can not get destination information. The destination JNDI name is NOTIFY_QUEUE, the provider URL is null>
<Jun 25, 2012 12:14:45 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:03 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:25 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:35 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:15:43 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:20:53 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
>
<Jun 25, 2012 12:24:16 AM GMT+06:00> <Error> <Common> <BEA-000621> <Expected RemoteException, RuntimeException, or Error
java.io.IOException: RJVM has already been shutdown
java.io.IOException: RJVM has already been shutdown
     at weblogic.rjvm.RJVMImpl.addPendingResponse(RJVMImpl.java:511)
     at weblogic.rjvm.RJVMImpl.send(RJVMImpl.java:898)
     at weblogic.rjvm.MsgAbbrevOutputStream.flushAndSend(MsgAbbrevOutputStream.java:394)
     at weblogic.rjvm.MsgAbbrevOutputStream.sendRecv(MsgAbbrevOutputStream.java:424)
     at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:54)
     Truncated. see log file for complete stacktrace
Edited by: 942523 on Jun 24, 2012 11:38 PM

Thanks René van Wijk for the reply.
I have a foreign server created in my local server, where i have already given the provider URL. This foreign server has the one queue and one queue connection factory under it to which I'm referring to.
Under JNDI tree i noticed this, for the queue(NOTIFY_QUEUE) i'm trying to read from one of the EJB:
This page displays details about this bound object.
Failed to create InitialContext using factory specified in hashtable
Also,etc/hosts has already these IP entries. Even after hardcoding the provider URL its throwing following:
<Jun 25, 2012 3:01:31 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
javax.naming.CommunicationException [Root exception is weblogic.rjvm.PeerGoneException: ; nested exception is:
     java.io.EOFException]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:74)
     at weblogic.jndi.internal.WLContextImpl.translateException(WLContextImpl.java:452)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:408)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:393)
     at javax.naming.InitialContext.lookup(InitialContext.java:436)
     at weblogic.jms.common.CDS$2.run(CDS.java:503)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.jms.common.CrossDomainSecurityManager.runAs(CrossDomainSecurityManager.java:130)
     at weblogic.jms.common.CDS.lookupDestination(CDS.java:497)
     at weblogic.jms.common.CDS.getDDMembershipInformation(CDS.java:276)
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.createMDManagers(MessageDrivenBeanInfoImpl.java:1455)
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.activate(MessageDrivenBeanInfoImpl.java:1252)
     at weblogic.ejb.container.deployer.EJBDeployer.activate(EJBDeployer.java:1320)
     at weblogic.ejb.container.deployer.EJBModule.activate(EJBModule.java:493)
     at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:531)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:165)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:157)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
     at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:43)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
     at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.rjvm.PeerGoneException: ; nested exception is:
     java.io.EOFException
     at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at weblogic.jndi.internal.ServerNamingNode_1033_WLStub.lookup(Unknown Source)
     at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:405)
     ... 36 more
Caused by: java.io.EOFException
     at weblogic.rjvm.t3.MuxableSocketT3.endOfStream(MuxableSocketT3.java:338)
     at weblogic.socket.SocketMuxer.deliverExceptionAndCleanup(SocketMuxer.java:768)
     at weblogic.socket.SocketMuxer.deliverEndOfStream(SocketMuxer.java:702)
     at weblogic.socket.SocketMuxer.readReadySocketOnce(SocketMuxer.java:890)
     at weblogic.socket.SocketMuxer.readReadySocket(SocketMuxer.java:840)
     at weblogic.socket.PosixSocketMuxer.processSockets(PosixSocketMuxer.java:130)
     at weblogic.socket.SocketReaderRequest.run(SocketReaderRequest.java:29)
     at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:42)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:145)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:117)
>
<Jun 25, 2012 3:01:31 AM GMT+06:00> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: NotificationQueueAnonymousWaiter is unable to connect to the JMS destination: NOTIFY_QUEUE. The Error was:
Can not get destination information. The destination JNDI name is NOTIFY_QUEUE, the provider URL is t3://10.52.50.51:7002>
Let me know if any other thing i'm missing or it can be something else like network or some other issue.

IPad 2 - I am not able to connect my iPad 2 to my tv anymore using AV adapter.

What is wrong with my iPad 2? I'm not able to conect my iPad to my proyector or tv anymore using AV adaptor. Is there something wrong with my iPad?
I tried it with my wife's iPad 2 and it was the same result. I was not able to connect her iPad to my TV. Niether TV or a proyector couldn't find the device.
Would you please help me? Your help will be well appreciated.

Sounds like the one common thing is the adapter. The cheaper, non apple branded ones tend to fail.
Try another adaptor before worrying about your ipad.

Erratically not able to connect to one particular network

Similar Messages

Maybe you are looking for