ERRDIS Scenario doc needed

Hello,
I am searching for technical documentation which describes in detail the conditions or situations a switch port is put in ERRDISABLE state.
The switch is a Cat6500 running 12.2(18)SXD1.
Many thanks for a quick reply.
Kurt

Hi Kurt,
There are some situation which can result into errdisable state like dtp-flap, gbic-invalid,link-flap, pagp-flap, psecure-violation, udld. Also sometimes due to late collisions ports go into errdisable state.
This link will guide with the same for cat6k switch with IOS ode running 12.2SXD series
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/cmdref/i1.htm#wp1099728
HTH, if yes please rate the post.
Ankur

Similar Messages

Which scenario we need to choose ?

Hi experts,
For inventory which scenario we need to implement i.e
1.Inventory management with non-cumulative key figures or
2.Inventory management with SnapShots.
Please guide me what is the difference and which is the best.
Full points will be assigned.
Thanks & Regards,
V N.

Hi,
Please go thru these links;
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Thanks..
Shambhu

Docs needed for installing siebel in solaris 10 x86, Urgent..!!!!!!!!

Docs needed for installing siebel in solaris 10 x86
Thanks
Kishore
Edited by: Kishore P on Aug 11, 2010 6:03 PM

If it's documentation you're after, always go straight to Siebel Bookshelf!
http://download.oracle.com/docs/cd/E14004_01/books/SiebInstUNIX/SiebInstUNIXTOC.html

Idoc to FI scenario - Help needed

Hi folks,
Scenario: Idoc to file:
I am trying to push COSMAS01 from SAP R/3 systemt to PI 7.1. I did the following
1> Configured the IR and ID
2> Did the ALE config on the sender R/3 system and also pushed idoc using BD16. I also see the status of the idoc as 03 (Send to port ok). However when I run IDX5 and SXMB_MONI, I dont see any message . idoc received.
Let me know where do I check to troubleshoot this issue.
I also have a doubt, Do I need to distribute the model from BD64 to from R/3 ? Is it needed?
-- AKJ

Thanks guys,
I was able to move a bit further. The isse was in SM58 on the sender R/3 side. The message was the sender port was not configured in IDX1.
I just did and cleared tRFC and it worked now. However the message in SXMB_MONI is in error. This is the error message.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I could the my idoc content in the XML payload
I read other blogs and forum messages and this issue has to do with clearing cache
I did the following
Did full clearing of cache SXI_cache
Also cleared CPAcache using PIDIRUSER and PIRWBUSER
Restarted executiong of messages in SXMB_MONI, but in vain.
Please advise what I am missing.

RFC to XI to File (FTP) Scenario ? Need your help

Hi XI Experts,
currently I am into one the problem where I am doing one scenario which has the case of executing RFC on the SAP RFC side and based on which I will be getting the output table which will converted to XML by SAP XI and then we get that to download to FTP server as xml file only initally.
error I am facing below:
11/14/09 18:00     Success     The message was successfully retrieved from the call queue.
11/14/09 18:00     Success     The message status set to DLNG.
11/14/09 18:00     Error     Received XI System Error. ErrorCode: NO_MAPPINGPROGRAM_FOUND ErrorText: ErrorStack: Interface mapping Object ID 18C33445E45E347387DC803834A96D42 Software Component 8E59D621C60211DEA247C2AB0A60051A does not exist in runtime cache
11/14/09 18:00     Error     Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:.
11/14/09 18:00     Error     Transmitting the message using connection http://tpxidq.mycompany.com:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:.
11/14/09 18:00     Error     The message status set to FAIL.
11/14/09 18:00     Error     Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:
11/14/09 18:00     Error     MP: Exception caught with cause com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_MAPPINGPROGRAM_FOUND:
And this is first time we are doing this type scenario if any help regarding whole scenario is also welcome.
Thanks in advance guys, I appreciate your time and effort.
Thanks & Regards,
Gaurav Patwari
Edited by: GauravPa on Nov 14, 2009 2:15 PM

NO_MAPPINGPROGRAM_FOUND
1) Open Interface Determination in ID and check if correct source and target interfaces are entered there.
2) Also check the name of the Interface/ Operation Mapping whic is included in the Interface Determination
3) Make some dummy change to this Interface Determination and again activate
4) Check the ache Status in ID --> Environment --> cache Status Overview
5) In SXI_CACHE check if the Interface mapping and Interface Determination are present
6) If needed perform a cache refresh
Regards,
Abhishek.

FI/CO Docs.,Needed

Hi All
As am new to Fi application, can anyone send me docs on FI related
I need baics to understand the functionality of FI/CO and tables used and standard extractors used in FI/CO
Pls helpme out
Regards
Balji

Hi,
Check this links. You can find a lot of information there:
http://help.sap.com/saphelp_nw2004s/helpdata/en/65/7beb3cad744026e10000000a11405a/frameset.htm
http://help.sap.com/bp_biv170/html/BW/I01_EN_DE.htm
http://help.sap.com/bp_biv170/html/BW/I05_EN_DE.htm
Hope this helps.
Regards,
Diego

Idoc to file scenario doc

Hi,
Can anybody share the document of IDOC to File Scenario for Vendor Master.
Regards,
Balaji

Hi Balaji Permi ,
Check these websites which wil answer u'r question:
A Step-by-Step Guide on IDoc-to-File Using Business Service in the XI Integration Directory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
How to convert an IDoc-XML structure to a flat file and vice-versa in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Introduction to IDoc-XI-File scenario and complete walk through for starters.
IDOCs (Multiple Types) Collection in BPM
IDOCs (Multiple Types) Collection in BPM
cheers!
gyanaraj
<removed by moderator>
Edited by: Mike Pokraka on Aug 12, 2008 3:07 PM

Data Load scenario- help needed

Hi gurus,
Please help me with the below scenarios for the LO mechanism:
Rec 1 entered in R3 between T1 and T2 (during R3 setup table population). When does Rec1 get into BW?
Rec 2 entered in R3 between T2 and T3 (after setup table population but before initialization loads). When does Rec 2 get into BW?
Rec 3 entered in R3 between T3 and T4 (during initial loads in BW). When does Rec 3 get into BW?
Rec 4 entered in R3 after initialization is completed after T4. When does Rec 4 get into BW?
Time
T1                                          T2    T3                                                                               T4
|--|---||--
       Rec 1                                Rec2                                   Rec 3                                                   Rec 4
T1 T2 Setup Tables populated
T3 T4 Initial Loads performed
T4 onwards Delta Loads performed

Hi ,
senario1;Rec 1 entered in R3 between T1 and T2 (during R3 setup table population). When does Rec1 get into BW?
during the setup table filling ,v3 jobs will be descheduled
you need to lock all the user's (no user can post documents)
Rec 2 entered in R3 between T2 and T3 (after setup table population but before initialization loads). When does Rec 2 get into BW?
here just setup table is filled,however init is not performed
so still v3 jobs will be in descheduled mode ,the posting which were/are happened sits in application tables
Rec 3 entered in R3 between T3 and T4 (during initial loads in BW). When does Rec 3 get into BW
here init is running,it will be down time for R/3 due to heavy load processing to BW
so still v3 jobs will be in descheduled mode ,the posting which were/are happened still sits in application tables
Rec 4 entered in R3 after initialization is completed after T4. When does Rec 4 get into BW?
after init,now we need to schedule v3 jobs, so all the postings(which were posted earlier/which are posted for the moment) now will transfer from application tables to delta que depending on the update mode(direct/queued/un serialized)
Hope this helps you!!!!!!!
cheers,
Swapna.G
Message was edited by:
        swapna gollakota
Message was edited by:
        swapna gollakota

Sales Forecast Scenario - help needed

Dear Experts
I need your help in following forecast scenario:
I am have two planning areas, one for actuals and other for planning (The cube structure are similar). The forcast function is written at material and month level in mutiplanning area. I have created a new planning version LE2 by copying actuals for first six months of 2008.
I like to generate forecast for next six months in this plannng version. by using reference data from actuals planning area with version # and period 01.2007 to 06.2008. I am using Automatic Forecast Method as the strategy.
I have restricted the calmonth characteristic in the package as 07.2008 to 12.2008. The fields for reference in the function has calmonth from 01.2007 to 06.2008 and # as version and planning area = planned. Field for condition has version # and planned as planning area.
I have following issues:
The function is using refrence data from 01.2007 to 12.2007 and not up to 06.2008?
Proposing values for version # and actuals planning area insted of LE3 version and Planned planning area.
Please guide.
Best Regards
Shahid

Hi
There is a correction in my previous mail. The planning area in reference data is set to actuals.
Best Regards
Shahid

I have lost my previous apple ID details, how can I replace it with the new one? knowing that i have all the bills and docs needs. Thank you?

Greetings,
I live in Istanbul, Turkey
I have lost my old Apple ID details including the Password and Email address
I have created a new one now but my iphone is locked to the old apple ID
it keeps telling me that his phone is currently linked to the old ID I have to enter the email and password, which i have already lost
The iphone is mine, where i have all the needed docs and bills with the packaging and insurance.
Please let me know what should I do
and how can I contact apple support to sort this issue out.
Thank you for your help
Waiting for your early reply.
Regards
Bassam.

Contact Apple using the Contact Us link at the bottom of the page here.

Certification Docs., needed

hello all
if nayone has certification docs for taking up /preparing certification exam,kindly forward to my id
[email protected]
many thanks
balji

I am just a beginner, but I can answer this question.
Start here:
http://www.oracle.com/education/certification/index.html?starthere.html
You should be able to find an OCP candidate guide that is very
helpful. When using the Oracle web site, getting the
information you need (as opposed to the advertising that Oracle
wants to feed you) is very difficult. Be patient. You might
find more help on some of the other forums.
The fact that your question has not been answered in over
a month is sad. Apparently the Oracle community is afraid
of new competition.

Xen server quick start doc needed

Anyone have a good intro doc for someone on vmware looking to explore the option of xen instead?
I have a narrow window for testing, and I'd to know pretty quickly if it feel right or not.
I want to test hyper-v as well, with the final candidate (assuming I consider switching to either) getting a test in Production.
Might as well - it's where I test everything else.
This topic first appeared in the Spiceworks Community

You just need to look in the correct place:
You won't find this on the OTN version of the BC4j doc, That page looks like 903 not 9031 doc.
You'll find definitions of the AM configuration parameters in 9031 Jdev help:
Develop Business Components
- Business Compents Reference
- Business Component System Properties
Here is where you'll find doc for AM properties like:
# -Djbo.ConnectionPoolManager
# -Djbo.SQLBuilder
# -Djbo.ampool.initpoolsize
# -Djbo.ampool.maxavailablesize
# -Djbo.ampool.maxinactiveage
# -Djbo.ampool.maxpoolsize
# -Djbo.ampool.minavailablesize
# -Djbo.ampool.monitorsleepinterval
# -Djbo.ampool.resetnontransactionalstate
# -Djbo.debugoutput
# -Djbo.doconnectionpooling
# -Djbo.dofailover
# -Djbo.entityrowset.mode
# -Djbo.initpoolsize
# -Djbo.locking.mode=optimistic or none per Steve M. none is what we want
# -Djbo.max.cursors
# -Djbo.maxpoolcookieage -Djbo.maxpoolcookieage=1800 ??
# -Djbo.maxpoolsize
# -Djbo.pers.max.active.nodes JBOVARS="-Djbo.pers.max.active.nodes=100 -Djbo.pers.max.rows.per.node=200 $JBOVARS"
# -Djbo.pers.max.rows.per.node
# -Djbo.poolmaxavailablesize
# -Djbo.poolmaxinactiveage
# -Djbo.poolminavailablesize
# -Djbo.poolmonitorsleepinterval
# -Djbo.poolrequesttimeout
# -Djbo.project
# -Djbo.recyclethreshold
# -Djbo.use.pers.coll
curt

Data to be fetched from legacy system to SAP and doc needs to bee posted

Hi Experts,
I have a requirement where my client is using some application in Legacy system(Fuel Software) which receives fuel(Petrol, Deasel, CNG) in system and issue the same to company owned vehicles and wants that sap should be integrated and document also needs to be posted in sap for all the receivings and isssuences against their vehicles.
Process Designed is:
1. Required Data file will be picked from legacy system with some date stamp and will be placed in sap directory.
2. There will be batch job which will check for new file based on date stamp.
3. Will pick record n will pass to Goods_mvt_create bapi and then will post the document.
4. We have created Vehicles as Internal orders in sap and whenever any issue will be there internal order no will be captured.
5. By this way we are receiving and issuing in sap.
Now my problem is i am stuck in designing step 1 and rest 2,3,4,5 steps have already been designed and working fine. Need your help in step 1. Else you may suggest some better way-out but again want to mention rest steps are already mapped
Thanks in advance..

Hi Ashutosh,
You can use functions:
FTP_CLIENT_TO_R3
FTP_COMMAND
FTP_COMMAND_LIST
FTP_CONNECT
FTP_COPY
FTP_DISCONNECT
FTP_R3_TO_CLIENT
FTP_R3_TO_SERVER
FTP_SERVER_TO_R3
FTP_START_REG_SERVER
FTP_START_SAPFTP
FTP_STOP_REG_SERVER
FTP_VERSION
which allow you to connect from SAP ERP to any FTP server (if the legacy has it). You can validate the sample program RSFTP007.
Regards,
Juan

HTTP to SOAP scenario, help needed.

Hi friendz,
I am tyring to do HTTP 2 Soap scenario, so can any one tell me how to download "wsdl" file 
i know how to import an existing wsdl file, but i want to know how we ll download, the file from webservices. i hope u understood my question.
If possible , can any one send me the entire steps for the above scenario, please send me the pdf file to my email: [email protected]
regards,
Satish.

so, you are going to consume webservice. First use the wsdl url in the browser and save the content as a file. After saving, go to ESR , use external definition tab and save over there. In IR, at the soap receiver side you have to configure target URL and user credentials over there.
If you have more questions, Please let us know. Hope I answered your question

Critical Scenario - Help Needed

Hi Gurus,
Scenario:
1) I have a table control with 2 radio buttons, 7 columns and 1 column of push buttons.
2) On click of radio button 2, the push button gets enabled and on click of the push button, a pop-up
screen comes up.
3) After entering data on the pop-up screen, control should come back to the main screen and whatever
data the user has entered should get displayed.
4) Now say user has entered 7 rows of data by repeating the above process. Suddenly, the user wants to
see what he entered in the first row's pop-up, then the user has to press the first row's push button in order
to see what he had entered in the pop-up.
My Problem is with the 4th Point, how can I achieve this.
Challenges I am facing: Even though I am clicking the 5th row's push button, it is showing me the 1st row's
data.
The Pop-up screen's values should change row wise depending on the data.
Please help me out, this issue is eating me up.
Thanks
Chandan

dont u go thru all the reply given to ur issue ......
again & again ur asking the same thing....
*screen 100
data: l_function like sy-ucomm,
        l_lin      type sy-stepl.
clear: ok_code,l_function,error.
ok_code = sy-ucomm.
l_function = ok_code.
if l_function(2) = 'BU'.
    clear l_lin.
    l_lin = gt_cat09-top_line + l_function+2(2) - 1.
   read itab into ls_itab index l_line.--->current line. basedon conditions u can call popup message.
    perform get_relations.
    if gt_cat06[] is initial.
      perform display_popup.--->pop up select options.
    else.
     saved = 'X'.
    endif.
    if error ne 'X'.
      call screen '0101'.-->i'm calling another screen.
    endif.
endif. case ok_code.
    when 'SAVE'.
    when 'DELE'.
    when others.
endcase.
regards
Prabhu

ERRDIS Scenario doc needed

Similar Messages

Maybe you are looking for