Errer message while adding a computer account to a local group in Group Policy Preferences...

Hi all;
Suppose I want to add a computer account to Event Log Reader on local computers by using Group Policy Preferences. Look at the following figure:
But after selecting the desired computer account and clicking OK, the following error message appears:
Any ideas?
Thanks
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

> But after selecting the desired computer account and clicking OK, the
> following error message appears:
Couldn't repro - worked in my domain for both a builtin group and a new one.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Similar Messages

Error Message while adding Item in Item Master Data- [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting the nvarchar value 's008 01' to data type int. (CINF)

Dear Experts
I am getting the following error message while adding item in Item Master data. I have modified the following SBO_SP_transactionNotification in SQL server after that could not able to add the item
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(20),                      -- SBO Object Type
@transaction_type nchar(1),               -- [A]dd, [U]pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int                       -- Result (0 for no error)
declare @error_message nvarchar (200)           -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
--    IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
-- Select the return values
select @error, @error_message
end

Hi Rathna,
Just put the SP like this, without the -- before the IF. A -- marks the line as a command therefore you need to uncomment and it will work.
IF @OBJECT_TYPE = '59' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U')
BEGIN
   IF EXISTS(
    SELECT T0.Price FROM IGN1 T0
    where IsNull(T0.Price, '0') = '0' and T0.DocEntry = @list_of_cols_val_tab_del)
   BEGIN
    SELECT @ERROR=1,@ERROR_MESSAGE='Please insert the price !'
END
end
Hope it helps

Not able to add another gmail account to ipad mini it says something imap.gmail while adding an gmail account

Not able to add another gmail account to ipad mini it says something imap.gmail while adding an gmail account. The device already has my brother gmail created apple id so I also created mine using itunes .I can log in itunes and download apps and I want to do the same using ipad mini with my apple id but when trying to add another account it says something imap.gmail incorrect. Is there a way to add 2 gmail apple id .

Try 'unlocking' your account here: https://accounts.google.com/b/0/DisplayUnlockCaptcha

Error Message while adding material in BOM

Dear All,
A raw material (A) is in the BOM as on date. A new material (B) which is a new development is to be used henceforth. I have inventory of A which can be consumed for the next 4 to 5 months.The material B is added as an alternate to A in the BOM,with 100 percent probability to B and zero percent to A. This is done to facilitate 2 motives.
1.To have auto generated PR for material B from the system, when the MRP run is done during the month.
2.To issue the material A to production based on Production order, which is based on BOM.
Also I Block the material A for further procurement by setting a special status to the material in the material master.This is done to ensure that no further PR & P.O is generated for material A.
After a month's time I am creating a BOM, for a new variant, where this material A or B is to be used. As per my earlier logic, I try to put both the materials as alternative to each other,with the 2 motives as mentioned above.
I am stopped by the system for including material A in the BOM,by an error message since it is blocked for procurement.
A warning message is welcome but not this error message.
Can anyone tell me how this can be done.And whether the procedure adopted in this scenario is a optimised one? Any other way to handle such a business situation?
Regards,
Aditya

Hi Aditya,
I think you can use production version .
You can create a production version with alternate bom1 with mateiral B.
Another version with alternate bom2 wtih material A.
Second option you can use discontinuation process with follow up material
check this link for further help.
http://help.sap.com/saphelp_47x200/helpdata/en/ea/e9b3f84c7211d189520000e829fbbd/frameset.htm
If helpful reward points
Regards
Ranga

Error Message while adding songs?

Whenever I try to add new songs to my ipod, I get an error message on the computer and itunes quits. I tried restoring the ipod, rebooting the computer, re-installing itunes, but it still won't work. Need help!

goto
www.videora.com and find the iPod Converter...it should be at the bottom of the page.
Then to copy DVD's you mus find a DVD Decrypter which you can just search on yahoo to find.

Error message while adding KFF to Standard page through Personalization

Hi,
I am trying to add Personal Information KFF to one standard page through personalization, followed below steps.
1) create item through personalization
2) Item Style = Flex
3) Appl Short Name = PER
4) Name = PEA
5) Type = key
But I am getting below error message after come back to page
The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: KeyFlexfieldDefinitionFactory.getStructureNumber could not find the structure definition for the flexfield specified by Application = PER, Code = PEA and Structure number =
Please suggest Steps to Add KFF to Standard Page through Personalization.
Thanks in Advance,
Hanimi.

Hi
Did you add the value for View Instance?
Regards
Sahir

Error while Adding field on Screen Variant

Hi SAP Gurus,
I want to add one field Trading partner in Fast entry screen.
I am getting below error message while adding one field Trading Partner in Screen Variant ES007(O7E6)
FIELD instruction for field BSEG-VBUND missing on template screen
Message no. F4171
Please let me know where do I have to maintain Trading partner field in template screen.
A quick response on this is highly appreciate.
Regards,
SATVIR SINGH
Edited by: Satvir S Digwa on Oct 6, 2010 12:41 PM

Hi
Go through the below link:
Re: Trading partner in Field Status Group
Rgds
Vani

Can`t rename computer computer account is already exists

We have domain on 2 DC`s(1 is GC and the 2nd is DC(Server 2008r2 ent)), Sometimes we need to replace old computers to the new ones. But they have to to be named like the old ones. So sometimes after removing old comuter from the AD, we still have an error
message "Can`t rename, computer account is already exists" where else should we remove it????????

Let's try the following:
- configure the other domain controller as a Global Catalog - this should be the case in a single-domain forest
- force the garbage collection by following http://blogs.technet.com/b/ad/archive/2009/03/24/taking-out-the-trash.aspx
Check the list of deleted objects again afterwards.
If this does not provide the resolution, restore the tombstone of one of the deleted computers (followhttp://technet.microsoft.com/en-us/magazine/2007.09.tombstones.aspx ),
rename it , and delete it
hth
Marcin
i`ve tried all of that except, configuring other Dc as GC, i ve found an article http://technet.microsoft.com/en-us/library/cc737269(v=ws.10).aspx it
says that nothing would happen if two DC`s will be GC`s, but it vad not been written that this article aplies to win2008r2 only to earliests OS`s, so i`m affraid if something wrong will happen if i will promote another DC to GC, or i`m wrong??!
I couldn`t force garbage collection, but i`ve enabled log as you said, and it seems to be no trouble with it....
about the restoring tombstone.... i ve stuck on the step when i should search the deleted object, because search result "getting 0 entries"
The same thing is about the article that Sandesh Dubey had linked "http://technet.microsoft.com/en-us/library/dd379509(v=ws.10).aspx"
if i am not wrong, i should go to Configuration in tree of ldp and then to the Deleted Objects, but it says that there is no children.
Please people be patience with me, i really am need your help!

Can you change the "System Installation Account" from the Site Server Computer Account to a Service Account after the DP is configured?

When the distribution points were configured, we used the Site Server Computer Account.
Now we would like to change to a service account and remove the site server computer account from the local administrators group (and add the the service account).
Can someone provide some guidance on if this is possible, and what steps should be taken to accomplish?
Thanks

Sure, just modify the properties of the "Site System" role in the console (in the Administration workspace under Site Configuration -> Server and Site System Roles).
Why would you do this though? It's less secure and adds an administrative burden.
Jason | http://blog.configmgrftw.com

Time Machine error message while restoring..."an error occurred while adding a recovery system to the destination disk

I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
Thanks

I've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website.

Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices

Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices so can't think what could be causing it to happen. Any suggestions please?

Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
Here is a link to the other thread I was referring to above:
https://discussions.apple.com/message/19952545#19952545
Have you applied the latest firmware updates to your ATV 3's?

Getting error message when adding on account payment in Outgoing Payments

Hi,
We are getting error message "No Matching records found 'Sales Tax Authorities Type' (OSTT) (ODBC - 2028) [ Message 131 - 183]" when we are trying to add account payment in Outgoing Payments. We are not getting any errors while adding customer payments or vendor payments. Please give us the solution.
Version : SAP 2007B SP:00 PL:00
Thanks,
Sravan Kumar Pothu

Hi Jeyakanthan,
Thanks for your immediate reply.
Actually in outgoing payments there is no tax code selection available. Just we simply selecting the account on which we are making payment and amount( in payment means we are giving cheque details). When trying to add it is giving above said error. Kindly let me know if you have any solution.
Thanks,
Sravan Kumar Pothu

Error while adding landed cost G/L account 5207010003 needs DR assignment for dimension 1; fill in DR-related fields

Error while adding landed cost G/L account 5207010003 needs DR assignment for dimension 1; fill in DR-related fields

Hi Rajesh
Go to System Initilization => General Settings => Cost Accounting => Check the Dimension1 has Block Posting.
Relase the Block and add the Document it will add.
With Regards
Balaji

DI API Error Code - 1, Error Message - General Error while adding order

Hi All,
    While adding sales order using di api(in .net web application), i receives error(code-1, message-general error) if some particular items are inserted as line items. For all other items, it works fine.
    I put code to export the order to be added as xml if its giving such error. Then I have written one vb code which accepts xml as input and adds order from it. I tried exported xml with this application and it worked, without any change in exported xml order.
    So I thought if general error comes, .net web page should export order xml and import it again and then use add method. But its not working. Though exported xml gets imported and order gets created if I use the other vb code(i run this after some 5 to 10 min, after order is not created from web application).
    Please help me out of this problem.
Thanks and Regards,
Yogesh.

Hi Yogesh,
I am not sure about the cause for your problem, but I would recommend to:
a) use SQL Profiler to find out (hopefully) where the transaction actually breaks and
b) involve SAP Support to find out what doesn't work when you use these particular items.
HTH,
Frank

When trying to restore an iCloud backup, I receive the error message "Appe-ID cannot be created. invalid device while updating mme delegate account".

After a complete crash of my iPad 3 (WIFI only) because of updating to iOS 7.03, I try to restore my config from iCloud.
I managed to get into the settings assistant and enter my Apple-ID (which is valid as checked via iTunes).
But then I see the error message "Apple ID cannot be created - invalid device while upgrading mme delegate account".
I have no clue what the mme delegate account is but need my data back.
Any suggestions?

All you need to do is restore the iphone in itunes as new
and then set up as new
after this is done
then you can restore from itunes back up with out any error!!
-Johnny

Errer message while adding a computer account to a local group in Group Policy Preferences...

Similar Messages

Maybe you are looking for