Erreur 5 sur Lightroom 5 : module développement bloqué, que puis je faire ?

Si j'ai bien compris le problème, j'utilise une version "créative cloud" du logiciel que j'ai téléchargée au départ. J'ai ensuite acheté le logiciel mais même après plusieurs désinstallations complètes et nouveau téléchargement je retombe sur le même problème. erreur 5 module développement bloqué, renouveler votre abonnement
comment puis je télécharger et utiliser normalement le logiciel que j'ai acheté ???
(ou au pire me faire rembourser mon achat pour acheter une version DVD du logiciel )
merci d'avance pour votre aide ...

Try this solution
Alessandro.

Similar Messages

  • A propos de flux de photo : cela fonctionne sur mon book air mais pas sur mon imac alors que tous les logiciels sont à jour ainsi que montain lion : que puis je faire ? Merci pr votre aide.

    a propos de flux de photo : cela fonctionne sur mon book air mais pas sur mon imac alors que tous les logiciels sont à jour ainsi que montain lion : que puis je faire ? Merci pr votre aide.

    Google translation
    about stream photo: it works on my book air but not on my imac so that all software is up to date and montain lion: what can I do? Thank you pr your help.
    Most common cause is not having the correct softwarwe versions - what version of iPhoto do you hactually have?See http://support.apple.com/kb/HT4486 for requirements and links to torubleshooting hints
    LN

  • J'ai fais la restauration de l'iPhone dc une sauvegarde s'est faite juste avant mais impossible de la remettre sur l'iPhone mtn. Que puis-je faire? Car j'ai perdu toutes mes photos du coup

    J'ai fais la restauration de l'iPhone dc une sauvegarde s'est faite juste avant mais impossible de la remettre sur l'iPhone mtn. Que puis-je faire? Car j'ai perdu toutes mes photos du coup

    When I bought my HP Photosmart Premium e-all-in-one C310 series last November, it worked properly with Vista.
    Since I installed Windows 7 64-bit impossible to function normally again.
    I just uninstalled and reinstalled several times the driver for windows 7 64 bit from the site ofHP. I also installed several times to add on 64-bit Windows 7 May 5, 2011.
    Unable to walk properly the printer for several weeks.
    I reported at the FNAC, where she worked (at least this is what they told me) but at home, shetold me that the cartridges are empty (so I've changed ... ) lescartouches that are misaligned (I have therefore realigned ...)...
    but I still get to be all roses pictures streaked white lines or texts that do not print at all (whiteleaves out ...)...
    I do not know where to go on the HP site and this, after having rejected my password aswrong, I was refused I renamed it as the password on the grounds that c is the former I have to change! So I changed but I simmering with rage against HP.
    A tip quickly for it to work before I throw my printer out the window and I bought another brandthat makes drivers compatible with Windows 7 and support a site that works.
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • Depuis que j'ai téléchargé la dernière version d'I Tunes (10.7), je n'arrive plus à synchroniser les contacts de mon I phone avec windows contact sur mon ordi: que puis-je faire, merci?

    depuis que j'ai téléchargé la dernière version d'I tunes je n'arrive plus à synchroniser les contacts de mon I phone avec windows contact sur mon ordinateur; que dois-je faire, merci?

    Zazzz wrote:
    Is it possible to not lose its data during a restore??  If so, how??  Is ICloud does the work??
    Y a-t'il une façon de ne pas perdre ses données lors d'une restauration??  Si oui comment??  Est-ce que ICloud fait le travail??
    Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Connectez-vous via le câble à l'ordinateur que vous utilisez pour la synchronisation. A partir d'iTunes, sélectionnez l'iPad / iPod, puis sélectionnez l'onglet Résumé. Suivre les indications pour la restauration et assurez-vous de dire «oui» à la sauvegarde. Vous serez averti que toutes les données (applications, musique, films, etc) seront effacées, mais, comme les finitions de restauration, il vous sera demandé si vous souhaitez le contenu de la sauvegarde à copier à l'iPad / iPod. Encore une fois, dire «oui».
    Sorry for my French.  I'm an American!
    Désolé pour mon français. Je suis un Américain!

  • Je ne peux plus faire de sauvegarde de mon mac book sur ma time capsule. Time machine ne me reconnait plus. Que puis-je faire ?

    Je n'arrive plus à sauvegarder mon MacBook sur la time capsule. Time Machine ne me reconnait plus et me renvoie: impossible d'accéder à l'image disque de sauvegarde.Au secours !!!!

    Merci, j'ai finalement trouvé la solution assez approchante.
    En fait je ne suis pas en Time Capsule mais en liaison réseau sur une disque Iomega Nas.
    Dans l'interface de mon NAs j'ai supprimé le répertoire et j'en ai recrée un avec un nom différent.
    J'ai redéfini ce nouveau dossier partagé comme partage TimeMachine dans l'interface Iomega et j'ai relancer timemachine et ca fonctionne maintenant.
    Bonne journée.

  • LORSQUE JE NOTE UN RENDEZ VOUS SUR MON AGENDA,il ne s'inscrit pas sur le cloud.par contre lorsque j'inscrit un rendez vous sur l agenda du cloud ,il s inscrite sur tous mes appareils! comment puis je faire pour le sens iphone cloud fonctionne?merci

    LORSQUE JE REMARQUE AGENDA RENDEZ VOUS SUR MON ONU, il ne s'inscrit Pas sur le cloud.par Contre lorsque j'inscrit non rendez vous sur l ordre du jour du nuage, il s listed sur Tous mes Appareils! commentaire Votre versez PUIS je faire le Sens iphone> nuage FONCTIONNE? merci

    Merci jmlevy de te pencher sur mon problème.
    Voilà une photo de mon panneau page :
    Puis une autre d'une page qui ne ressemble plus à rien après changement de pagination:
    Voici une ancienne page 28 devenue page 29. Fantastique, non ?
    On peut voir :
    Que mes blocs sont décalés par rapport à la maquette
    que le bloc noir de la page 28 déborde sur la page 29.
    Que mon bloc de texte est perturbé par l'ajout sous-jacent d'une page de maquette
    que ma pagination a conservé les attributs d'une page pair (numérotation à gauche) alors qu'elle est passée impaire.
    J'aurai considéré comme normal que mon ancienne p.28 se soit déplacée en page impaire avec le bloc texte bien placé ET avec les attributs de page (liés au gabarit, tels que pagination, filets, bas de page roulants) modifiés automatiquement. Or il n'en est rien.
    Tu me demandais des éclaircissements par rapport à "J'importe mes gabarits dans le document au fur et à mesure de la construction du livre et je libère les éléments de gabarit afin de pouvoir couler le texte et disposer l'icono. Lorsque c'est fait, je ne retourne pas dans le mode page d'InDesign. J'attaque la page suivante." Voici, plus en détails ce que je fais au moment où je monte une nouvelle page. Mes gabarits ont été  préparé en amont.
    J'ajoute une page au document (ex : une page de texte)
    je lui confère le gabarit qui va avec (ex : C-présentation ch1, cf plus haut)
    je libère les éléments de gabarits pour pouvoir couler le texte et disposer les images.
    quand ma page est finie je recommence l'étape 1.
    Est-ce que c'est à l'étape 3 que je me plante ?
    Est-ce qu'il y aurait d'autres explications à ce malheureux schmilblick ?
    Merci d'avance.

  • Lightroom web module

    Re "Lightroom Web Module"
    In the "site info" panel, I type the word "exit"
    In the "web or mail link" section, I copy and paste the web page address of the page on my site
    I wish it to be directed to.
    I preview this with the Lightroom "Preview in Browser" button.
    All works perfectly well including the exit link.
    I then export it into my website "local file".
    Create a link from text on my web page to the lightroom created gallery (I'm using Dreamweaver)
    Then save changes in Dreamweaver and click preview in browser.
    The Gallery works fine with the exception of the exit link.
    I have the same problem in the Web HTML Gallery
    I have also downloaded Lightroom 3.6 from Adobe labs and had the same result.
    Any Suggestions
    Many thanks...David

    Hi Pete. Thanks for your reply.
    Tried replacing exit with home without any results
    Doubbled checked the link address was correct in lightroom...it was.
    Just tried something I had not tried before. Up untill now, I was using only the "preview in browser" in
    Dreamweaver.
    When I uploaded the gallery to the remote server and went to see if it worked on my site it did !!!!
    Not sure why it won't work in the "preview in browser" in dreamweaver but.....a question for bigger brains than mine..
    Many Thanks for your help
    Dave

  • CVI: erreur ODBC sur Appli déployée

    Bonjour,
    Logiciel: CVI 2010 10.0.1 (419) sous Win XP32 SP3
    J'utilise ODBC pour accéder à une base MySQL via son connecteur 5.2w.
    Sur le PC de développement CVI, la connexion ODBC fonctionnement parfaitement.
    Un installeur (volume setup) est généré avec menu Build / Distribution / Edit puis Build (onglet Driver, LabWindows CVI Run-Time Engine est coché)
    Sur le PC de production, l'installeur (setup) est déployé suite au build.
    La connexion ODBC DBconnect("DSN=NomODBC;UID=xxx;PWD=yyy") retourne une erreur -100
    Question: Faut-il appliquer une option particuliere lors du Build pour avoir ODBC opérationnel ??
    Salutations
    Jean-Christophe.
    Résolu !
    Accéder à la solution.

    Bonjour, j'ai trouvé la solution:
    Sur la machine de développement il y a CVI SQL Toolkit 2.2
    qui s'est trouvé installer car full options.
    Sur la machine cible SQL Toolkit n'est naturellement pas installé
    car seul les éléments cochés dans le build de déployement sont installés.
    Hors CVI SQL Toolkit n'est pas dans la liste à cocher
    Il faut l'installer manuellement sur la machine cible.
    Salutations

  • Image Info setting in Lightroom Web Module

    I watched the Turning Gate Podcast on how to customize the text used for photo titles, captions and other items in Lightrooms web module.
    In the Podcast pictures I noticed that in the web module Image Info pane section there are four individual settings available: Title, Caption, Annotations and a fourth one which I could not read.
    In my version of Lightroom (Version 1.3) I have only Caption and Title available (displayed). How do I get the others displayed?
    Franz

    Brent,
    On the left hand side double click on hard drive under "Publish Services" then do the following
    In the Publish Services panel on the left side of the Library module, click the Adobe Revel connection Set Up button.
    In the Lightroom Publishing Manager dialog box, look under Account and click Authorize.
    Follow the prompts to allow Adobe Revel to communicate with Lightroom.
    I played around with it to figure out different features of publishing Lightroom to Revel.
    Once you have it set up then can create a new collection/abum by control clicking on the Adobe Revel.  Then you can add image from your hard drive by dragging and dropping them into an album.
    Then select "Publish" when you are done. Log in to your Revel account and check to make sure the images show up.
    You can add watermarks to the images if you like.
    Let me know if you have any other questions
    Thanks
    Scott

  • Question regarding using Lightroom Web Module and Zenfolio

    I use LR3 and like the galleries I can make in the Web Module.  If I use Zenfolio as a web hosting service, can I upload or export my photos from LR to Zenfolio and use the galleries I create in the Lightroom Web Module,,,or do I need to use the existing gallery templates in Zenfolio?  If that is the case, other than using Lightroom to upload photos, is it's Web Gallery Module superflous?
    Thanks,
    Matthew Kraus

    Matthew,
    If you are asking if you need to use LR's Web Module to export images to Zenfolio, then no you would not use the LR Web Module but rather use a plug-in to export directly to Zenfolio.  Or you can just export to your local HDD and use Zenfolio's upload module to grab the files from your local drive.
    Jeffery Friedl has a nice LR plug-in for SmugMug so I am sure his Zenfolio plug-in will work nicely as well:
    http://regex.info/blog/lightroom-goodies/zenfolio
    It's free, sort of, after the trial period, like 45-days as I recall, there is a limit on the number of files which can be uploaded.  When the trial expires if ya like it you just donate any amount and get to upload any number of files as Zenfolio allows in a session.
    Does that help answer your question?

  • Migration depuis Photoshop Album Edition Découverte V3.2 sur Lightroom V5

    Est-il possible de migrer les légendes et étiquettes des photos répertoriées dans l'ancienne version Découverte sur Lightroom V5 ?
    Merci d'avance.

    Only if they are part of the EXIF/ IPTC data, not custom catalog tags.
    Mylenium

  • Unnecessary page limit for Blurb book in Lightroom Book module

    I'm posting this per Julieanne Kost's request following an email exchange regarding this topic.  I am in the process of making a photobook using Lightroom and discovered when I reached page 240 that I couldn't add any additional pages, much to my surprise.  I was surprised because I knew from Blurb's website that the limit for standard paper is 440 pages and mistakenly assumed that this limit would also apply within Lightroom.  I did more research online and found many others being surprised by this limitation after spending hours and days on a photo book.  I will likely work around this by exporting from Lightroom to .jpg and uploading to Blurb, but that will take extra time and effort and reduces the appeal of using Lightroom to create a Blurb book.  I had also tried exporting from Lightroom to .pdf only to find that the .pdf format exported by Lightroom is not compatible with the requirements of Blurb.
    My recommendation in the short term would be for Adobe to warn Lightroom Book Module users up front that Lightroom's page limits differ from those if going directly through the Blurb website.
    My recommendation in the longer term would be for the Adobe engineers to make whatever changes are necessary in the Lightroom code to allow for 440 pages when standard paper is selected (and more specifically to make the page limits match the limits of Blurb's actual books).  If there is any way to impress upon Adobe management the importance of this, I believe it would be greatly appreciated by many Lightroom/Blurb users.

    I agree with that (though a 330 page Blurb book would break the bank :-)
    I would also like to see the LR book module allow at least all the same Cover Templates as Booksmart does - I feel really constrained with both of them but much more so with LR...At least let us Drop a Full bleed finished cover on to the front and back covers!
    Lately, I do all the page making in PS, move to LR to manage the page numbering and then export to jpg and ingest to Blurb to make my books...pretty kludgy, isn't it?

  • My preview panel in lightroom book module has no "create save book button". Where is it?

    My preview panel in lightroom book module has no "create save book button". Where is it? Is there a workaround to save my book?

    The \ key will hide and show the header bar in the book module and the Create Saved Book button is at the right of that header bar.
    The outlined area is what shows and hides when the \ key is pressed.  Maybe you have a keyboard that has a different key for \?  On my keyboard the \ key is just above the Enter key.
    You can also use the View / Show Header Bar in the LR menus across the top:
    If this doesn't work, then can you provide a screenshot of your LR book module?

  • When using Lightroom Book module for Blurb book making, why do I keep getting a low image quality message if it's supposedly accessing my large raw files in my library?

    When using Lightroom Book module for Blurb book making, why do I keep getting a low image quality message if it's supposedly accessing my large raw files in my library?

    I think I've solved my problem with a Google Search. I came across a free slide show generator
    (contributions requested) that shows much higher quality slide shows than either iPhoto or Aperture 3.
    You click on a folder of jpegs and it almost immediately generates thumbnails and within a few seconds
    I can be viewing a full screen, tack sharp, slideshow of all of the files in the folder. Much sharper than
    I'm used to seeing.
    I think I'll keep the Aperture 3 and use if for the purpose it's intended for in the future. I'll also redo the
    image preview files to the small size it started with and then I'll copy all of the files I'm interested in from
    iPhoto into a separate folder on another disk. I'll use Aperture to catalog and to perform image manipulations
    on but I won't try to use it as an iPhoto replacement. I don't think I'll be using iPhoto much as an image
    viewer in the future either after I finish moving my favorite pictures to the Phoenix Slides folder.
    The name of the free program is Phoenix Slides. It's free to download and try, free to keep (though I
    think you'd want to pay the small amount requested) and fast. My pictures have never looked so good
    before.
    http://blyt.net/phxslides/
    Message was edited by: Jimbo2001

  • Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.

    Regarding Lightroom Slideshow module: When I click on the preview button I get the following error: An internal error has occurred: ?:0: attempt at index a nil value. This occurs with any group of images I select in my catalog.

    Jeannine,
         If you follow the advice of the previous poster Julie Kmoch and then gradualy add presets back in one at a time you might be able to find the one that is causing the issue. I may be guessing, but I believe the issue has something to do with either an incompatible Preset setting (eg a older preset in newer version of LR) or a corrupt Preset.
    Say you bought LR2 and imported a bunch of Presets from the internet, cuz 'Hey these effects are cool and I don't have to recreate the wheel', and then you upgraded to LR3 (not a clean install) and now one of the Presets that calls a certain slider setting or value that is different in LR3 doesn't work anymore. This might be why it throws the error, but again I am just speculating.
    Location of LR Preset folder in Windows Vista/ Windows 7
    C:/Users/<YourUserName>/AppData/Roaming/Adobe/Lightroom/Develop Presets
    If you do not see the folder AppData, you may need to change the settings in Windows Explorer to 'Show Hidden Files and Folders'. To do that in Windows Vista/ Windows 7, open a Windows Explorer window, Click on Organize, then Foler and Search Options. Then click on the View tab and select the option button next to Show hidden files, folders and drives.
    Hope this helps a bit,
    Glenn

Maybe you are looking for

  • Regarding performance issue in SELECT - need suggestions

    Moderator message - use a more informative subject in future - having two or more posts with the same subject isn't helpful Hi All could you plese send me the alternative code for this select quesy: form read_data_from_GIPD.   select * from zbacks_gi

  • Bootcamp Drivers unaccessable In Windows 7 install

    I installed windows 7 on my new macbook pro 13, but I cannot access the drivers on the USB stick I created because Windows 7 does not recognize USB 3 ports which are the only way of putting the data on the new partition until I can load the networkin

  • Videos Not Playing After Publishing

    I am using Captivate 7 for Mac and uploading to the Litmos LMS platform.  In preview, my videos are playing just fine. When I publish to zip and uploading to Litmos, they don't play.  I get a little grey/white striped box making it look like it's loa

  • TS3938 Microsoft Office 2004 docs: How to access in Lion OS?

    Is there a work-around to access Word or Excel 2004 documents for example in Lion? Or do I have to buy a new version of of  MS Office? If so, will the documents open on my Lion OS laptop (they were presumably transferred when I installed Lion)? (The

  • How do I make a slideshow play in random order?

    I have a simple slideshow comprised of about 10 images that fade in and out from one photo to the next. I'd like to be able to have them play in random order. How can I make this happen?