Erro creating Sample Point thro BAPI_INSPOPER_RECORDRESULTS

Hi ,
While Creating Sample Point thro BAPI_INSPOPER_RECORDRESULTS.
I am getting an error 'There are no originals' , M-ID -Q0 MSG-No 102.PARAMETER -INSPPOINTDATA.
Can any one please explain why this is coming ?
Thanks in advance.
Harsharandeep

Hi Ajay,
Thanx for reply .
I have gone through this cdoe before , but problems seems to be same.
I am getting the same error.'There are no Originals'
Thanks and Regards,
Harsharandeep Singh

Similar Messages

Sampling Point / Storage Location in Inspection Lot

Hello,
We are looking for sampling point / storage location entry in Quality Certificate while dispatching it to customer, but these two fields are not available in inspection lot. Is there any possibility of making either of these two to enter while creating manual inspection lot so that same can be used as a link for the purpose of dispatch of Quality Certificate with the Sampling point / storage location information to the Customer.
Regards,
Puneet

Hi
Use User Exit
QPL10004 in QA01
This enhancement allows you to display or change additional data on the
screens for the inspection lot transactions.
maintain Sampling point / storage location here
Regards
Sujit

CS5 not recognising CS3 colour sampler points

Neither 32-bit nor 64-bit CS5 (run in Win 7-64bit Ultimate) are recognising (displaying) colour sampler points I created and saved in layered images processed with CS3. These colour sampler points are all displayed quite happily in 32-bit CS4, but they are just not visible in CS5, no matter what I do in terms of turning on or off one or more layers, or selecting (giving the focus to) any one or more layers.
This is pretty annoying because it means that I can't go back and readjust Black, White, Neutral or Skin Colour tones at the same precise locations previously and carefully chosen, sometimes after considerable experimentation, to achive what, at the time, seemed like optimal results.
Anyone else experiencing this anomoly, or know what might be causing it?

Thanks for the response Mylenium.
Found the answer to this "non-problem" (Duh!) myself. The colour sampler points are only visible provided you dont' have certain tools (like the Marquee Tool, and some others) active. All is well afterall and my CS3-made colour sampler points are, and have always been, visible in CS5.
Message was edited by: Andrew_Hart

How to log in to Service Desk to create sample message to SAP?

Dear all,
How to log in to Service Desk under my Solution Manager server to create sample message to SAP under Component: SV-SMG-SUP?
Regards
GN

Hi GN,
You have different options to create messages in test component SV-SMG-SUP-TST:
1. if you are on 7.1 you can create message using CRM_UI
2. If you are using lower vrsion then either you can create message using Workcenter or using transaction NOTIF_CREATE or using menu --> Help --> Create support message.
Thanks
Regards,
Vikram

Why do we create Sample Account

Hi,
I am practicing creating GL account. Somewhere in the documentation it talks about creating Sample Accounts.
Why do we create Sample Accounts?
How is it used in real life scenarios?

Hello,
Creating a Sample A/C is Optional.
It contains data which will be transferred when you have created a master record in the Co. Code.
Sample A/c are created when installing the syatem & assigned to the corresponding G/L A/C master record in Chart of Account.
Regards,
Asmieeta.
Assign Pts if useful

COLOUR MANAGEMENT IN PHOTOSHOP CS2 AND COLOUR SAMPLE POINTS

I always place colour sample points on my images in order to monitor colour changes as I adjust. When I soft proof (using using Perceptual rendering),I go to the Information pallette and right click on the colour sample points.I then choose Proof option on the basis that this should tell me the colour of the sample points when I print to my chosen printing paper profile.
However,this seems not to work. If I then make a new document (say 100 by 100 pixels) and fill it with the Proof colour,as indicated in the Information pallette as described above,it bears no resemblance to the image that I have soft proofed as seen on my display (Contrtol Y). Hard to explain all this in a message,but can anyone assist?
Grateful,
Roseanne

Good day!
What exactly do you mean?
Regards,
Pfaffenbichler

How to create restore point in windows server 2008 service pack1

hi i am bhaskar ... how to create restore point in windows server 2008 service pack1 and how to restore system from a restore point in windows server 2008 service pack1.. is this option available or not ? what is the difference between shadow copies and
restore point ? instead of restore point we have this shadow copies option in windows server 2008 ?Bhaskar

AFIK, Restore Points doesn’t exist in Windows 2008.
Volume Shadow Copy option can be used to achieve:
Creating consistent backups of open files and applications
Creating shadow copies for shared folders
Creating transportable shadow copies using a hardware provider — for backup, testing and data mining scenarios
Quickly recovering and restoring files and data
It is more like a file, data, application backup.
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
Blogs - http://blogs.sivarajan.com/
Articles - http://www.sivarajan.com/publications.html
Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
This posting is provided AS IS with no warranties, and confers no rights.

How to create Mount Point in Linux

Hi,
I m new to Linux OS, want to install Oracle EBS R12 on OEL 5.6 . I have downloaded s/w and installed all required packages for OEL.
Now i want to create Staging directory at location /u01/StageR12.
Can anyone guide me for how to create Mount point /u01 and how to assign space of 53 GB to it.... ?
Reply awaited...

You're on the right path.
Keep in mind though what you need partition wise just for o/s install. You should have at least 3 partitions:
- a ?? GB partition for the / (root) mount (the size depends on what you will install and how much space you will need for running that s/w)
- a 128MB or larger partition for the /boot mount
- a ?? GB partition as swap space mount (typically rule of thumb is 2x RAM for 4GB and lower, else around 25% of total RAM)
I would not create separate partitions for the old-style +/u01+ mount points for Oracle. That part of the OFA (Oracle Flexible Architecture) standards are old and pre-ASM and pre- automated Oracle managed data files.
You need space for installing an Oracle Home. I do not see the need for a dedicated mount point for that. I use the root file system.
You need space for the actual database. If you use Oracle ASM, then I would create raw partitions (across disks) to be used for database storage. These will not be mounted or formatted. Instead these will be assigned to an ASM diskgroup (and striped by default) and used for database storage.
If you do not use ASM, then you need a cooked file system for storage of database file. In that case separate mount point(s) make sense. Also, it makes sense not to manually apply the old OFA standards, but instead use Oracle managed database files. In that case you need a single mount point (e.g./oracledb) - and set that as the base directory for Oracle to use for the database. Oracle will create an OFA compliant database directory tree and files under that base directory/mount point.
Keep in mind that the more mount points you have for the database, the more difficult your job becomes to manage storage. The easiest is a single mount point for the database and using Oracle to manage the OFA compliant side for you on that mount point.
Also, you cannot and should not attempt some kind of manual striping layout of the database across multiple mountpoints. This may have made some sense back 10+ years ago. It no longer does.

How to create watch points in ECC 6.0

Hi Experts,
How to create watch points in ECC 6.0
Thanks.

Dear Kalyan,
The moment the debugger starts, there will be an icon for "Watchpoint" exactly after F5, F6, F7, F8 and a big STOP red button on the application tool bar. Once you click on that Watchpoint button, it will take you to the screen where you need to define the exact field and its relative operator along with the condition to be checked.
Hope this is clear. No navigation needed for this.
-Syed.

Restricting drop down list of sold to party when creating Sample Order

Hi,
I have a requirement to restrict the view of "sold 2 parties" when users are creating sample orders/ SPA contracts.
Has anyone implemented such a scenario using ACE?
Just wondering if this is the right approach to take as I need to understand performance issues.
Thanks,

well .. this is working for me right now. Will post back if I get fired for lack of available resources ( both system and user )

How to create bullet points in BoilerPlate 'Text' item...

Hi,
I have a requirement of generating a form. In that form there is a static section which contains bullet points. Is there a way to create bullet point in oracle reports.
I am using paper layout. As output is required in PDF format.
Thanks

Hi Arshad
You may try this trick to introduce bullet character in Reports on Windows platform:
For Boilerplates:
In Application such as Wordpad, hold Alt and press 0149 on numeric pad. This will insert a bullet mark in the editor. Copy this text and paste it in Reports Paper Layout.
For Fields:
Create a formula column (Character type) in the same group as the column that you need to bullet. Return the following result:
return '� ' || :<your_column>;
All the values based on this Formula column will display a Bullet mark.
Hope this helps.
p.s. character 149 is bullet character in most fonts.
Regards
Sripathy

Script to create Sample Schemas

Hi,
I'd like to create sample schemas in my Oracle 11g DB.
1) I tried to use the DBCA, but it didn't give me any option to create them for my existing db.
2) I tried to see the scripts under \demo folder, but HR folder contained hr_code.sql script. No script for creating the tables and data.
3) I searched the companion CD (in 10g), and couldn't know how to obtain the script from there.
Any help is appreciated.

Pavan,
This script mksample.sql is not in 11g(atleast in my system).
D:\oracle\product\11.1.0\db_1\demo\schema>dir mk*
Volume in drive D is VAIO
Volume Serial Number is 7476-8930
Directory of D:\oracle\product\11.1.0\db_1\demo\schema
06/30/2007 10:35 PM            28,262 mkplug.sql
02/09/2008 05:34 PM             1,775 mk_dir.sql
02/09/2008 05:34 PM             1,775 mk_dir.sql.ouibak
08/16/2006 10:10 AM             1,648 mk_dir.sql.sbs
               4 File(s)         33,460 bytes
               0 Dir(s) 12,980,768,768 bytes freeI have seen it in 10g but Ahmed is using 11g.
Cheers
Aman....

How to create Entry Point to pcd repository?

Hi,
I am unable to see the iviews to drag and drop on the web page in Web page composer.
I tried to create static entry point to PCD repository.
But I can't the PCD folders.
How do I configure this?
Thanks
Thruna Shanmuga

Hi Vishal,
Thanks for your replies.
I am able to see the my folder
in Content Administration -> KM Content ->
pcd>portal content>Test
In the property i set the following value.
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,
sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder;/pcd/Test
When I tried to create entry point in Web Page Composer, I click the browse to find the Test folder.
I can't see the Test folder.
How do I create entry point for the Test folder?
Thanks
Thruna Shanmuga
Thanks
Thruna Shanmuga
Edited by: Thruna Shanmuga on Apr 6, 2009 10:34 PM
Edited by: Thruna Shanmuga on Apr 6, 2009 10:42 PM
Edited by: Thruna Shanmuga on Apr 6, 2009 10:42 PM

Problem with Color Sampler Points

I'm using PSCS4 on a Mac Pro, and recently upgraded to Snow Leopard 10.6.3 from Leopard 10.5.8.
I regularly use color sampler points in Photoshop when adjusting curves. I seem to be having problems getting a sampler point to show up in the info palette when shift-clicking with the eye-dropper tool, or directly using the color sampler tool. I've also tried shift-clicking from within the Threshold command, but the points I click just don't seem to take a sample and show up. I never had this problem before. I'm bringing RAW, sRGB and ARGB digital images into PS from Bridge, and have tried 8 and 16 bit.
After trying for awhile, sometimes it just suddenly starts working again. For instance, I was writing this post after not being able to get PS to take samples. Then I went back and forth between the internet and PS, and it started working all of a sudden. Very odd.
Anyone else seeing this? Am I doing something wrong? Any workarounds?
Thanks, Lou

Thanks, Mark. You may be right, and I will try it.
I have my workspace setup saved, but I presume it is lumped in with all the other preferences. Is there a way to "Export" my saved workspace setup from Photoshop, so after I trash my preferences, I can reimport at least my workspace? I didn't see the ability to do that, but it may be hiding somewhere. I like my current dual monitor setup and prefer not to have to 'redo' it from scratch.
Thanks,
Lou

Eyedropper sample points changing in CS4

Hola. I upgraded to CS4 a couple of weeks ago and having issuse with the eyedropper sample points
Here's scenario. I select the eyedropper, and shift click to add a samplepoint on a base image, (so I can try and match some numbers via the info pallete). Then I add layer which I want to colour match, and add a curves adjustment.
So far so good. But as soon as I make a clipping mask with the adjustment layer, the sample point information disappears. I need the info to see if I'm matching the numbers - but it's visually confusing to have the adjustment layer effecting everything. What gives?
Also the color sampler information used to remain locked - it now changes depending on what layer I have selected. (I have 'sample all layers' selected in the eyedropper prefs BTW)
I remember reading about some buggy behaviour in CS4 like this - but surely this has been ironed out by now?
Cheers. Dave
2.8 GHz Quad core Xeon. OSX 10.5.8

Your observation also seems to hold for CS5.
But the Samplers disappear on clipping masking only if the Layer to which the Curves Layer is clipped is empty at those points.
I suppose you could temporarily add a Mask to the Adjustment Layer instead of clipping masking.

Erro creating Sample Point thro BAPI_INSPOPER_RECORDRESULTS

Similar Messages

Maybe you are looking for