Erro interface NTB2B - atualização de Support Package GRC / PI - SP 19
Pessoal,
Estou usando o cenário do NTB2B Z, daquela forma que criamos um Software Component novo e incluimos o SSL-NFE nas dependencias, e depois modificamos o interface mapping.
O cenário já estava configurado e estava funcionando no SP18 do GRC (SAPK-10018INSLLNFE). Foi atualizado para o SP19.
Após a atualização , o interface mapping NTB2B ficou em conflito com a versão importada, pois versão importada (do SP19, standard) está com o mapeamento java class enquanto a minha versão está com o meu Message Maaping Z. MInha dúvida é a seguinte, eu posso simplesmente escolher a minha versão Z do interface mapping e clicar no botão "Select Displayed Version" e ativar minha versão sem problema nenhum ou preciso fazer mais algum procedimento?
Mas em teoria, se seguiu o indicado no documento, vc era pra ter os 2 mapping programs no interface mapping modificado: o Java Mapping e o Message Mapping (esse até antes do Java).
Abs,
Henrique.
Similar Messages
-
Error in the phase IMPORT_PROPER while applying support packages
Dear All,
I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
I have successfully applied the kernel patch and started applying the support packages, i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
========================================================================================================
START imp all SCD 20081229080538 DDIC sealcpro 20081229080537
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF SCD N not needed DDIC sealcpro 20081229080537
START tp_getprots SCD P 20081229080539 DDIC sealcpro 20081229080537
2EETP000 sap_dext called with msgnr "1":
2EETP000 db call info
2EETP000 function: db_setget
2EETP000 fcode: RT_SETB (65535)
2EETP000 tabname: TRBAT
2EETP000 len (char): 0
2EETP000 key:
2EETP000 retcode: 1
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 5319
STOP imp all SCD 0016 20081229080602 DDIC sealcpro 20081229080537
=========================================================================================================
And also when i look at the Support package import logs they show that
TEST IMPORT
Import ABAP Dictionary Objects and
ABAP Dictionary Activation phases ended with return code 4
But i dont think this can give any problem.
I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
I had to start SAP and only then i was able to connect to the SERVER again.
Can you please help me on this..
For any more information plz let me know
Thanks and regards
HunkyDear Balaji,
Thank you very much for the reply...
I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
===================================================================
DBIF_REPO_INTERNAL_ERROR
Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
An unspecified internal error occurred in the SAP-internal
database interface.
For further analysis the SAP system log should be examined
(transaction SM21).
Check the entries in the developer trace of the relevant work process
(transaction ST11).
Attempted to access component "LOAD" of program
"CX_SY_OPEN_SQL_DB=============CP ".
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_INTERNAL_ERROR" " "
"SAPLSTPA" or " "
==========================================================================
Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
So i request you to kindly help me on this as i am running out of time in delivering my server.
Waiting for all the valuble replies
Thank you in advance
Regards
Hunky -
Loop in file to IDoc scenario PI 7.11 (Support Package 04)
In our scenario we use FileSenderCommunicationChannel to get files from FTP-Server. After processing the file should be saved in archive directory on our PI-Server (UNIX-System). Physically the archive directory is not in our PI-Server, it is a mapped windows server directory.
In case of non availability of the archive directory (e.g. windows server down), we have the following described problem.
1.
Start processing of file from FTP-Server (File with 2 lines, result 1 IDoc per line (2 IDocs))
2.
In AdapterEngine monitor we find 2 messages (successfully). Audit-Log of last message (second line) contains the following error.
File "TUM00001.TXT" - archiving file "/ext/windows_server/X/OLD/20100326-075807-897_TUM00001.TXT" after processing failed with java.io.FileNotFoundException: /ext/windows_server/X/OLD/20100326-075807-897_TUM00001.TXT (No such file or directory) - retry.
3.
In IntegrationEngine monitor we also find 2 messages for the IDocu2019s.
Error situation:
Now the loop startsu2026. (until directory is available (mapped)). Frequency of loop depends on u201CPoll Interval (secs)u201D of FileSenderCommunicationChannel.
1.
Create new message in AdapterEngine for last line of the file (with same entry in Audit-Log u201Cerror for archiving fileu201D)
2.
Create new message (IDoc) in IntegrationEngine
We doesnu2019t have this problem in our old environment (XI 3.0 Support Package 21).
Parameter of FileSenderCommunicationChannel:
Quality of Service: Exactly Once
Poll Interval (secs): 3600
Processing Mode: Archive
Archive Directory: /ext/windows_server/X/OLD
Directory for Archiving Files with Errors: /ext/windows_server/X/OLD/ERR
Recordset Structure: ROW, 1
Recordset Sequence: Ascending
Recordset per Message: 1
For me itu2019s an error, but Iu2019m not sure because itu2019s a mapped directory.....Hi Ram,
There is nothing new in PI7.1 which can cause these errors.. it is because the interface is configured wrongly
>>1) in Message mapping - I import the receiver idoc metadata. and doing mapping.So there are couple of mandatory fields over there. Please let me know how to treat them. Do I need to diable them or put some value. for exp Direct, Segment. SNDPRN RECPRN all these madatory fields are there. Please advice.
If you know the value the you can create the control record during mapping and the fields which you don;t required you can map it co constant. It is using this control record the partner profile entries are found and if there is a mismatch then the idoc will fail with the error which you mentioned in point 3
>>2) When I am creating communication component for sender side(File system) then should I assign the logical port and if then what name it can be . Is there any other place we need to maintain this entry. I remember in PI 7.0 I dont need to assign the local name. But here i see I need to do. if I am not putting the name over there then it throw error message "Unable to convert the sender service <Business Compoenetname> to an ALE logical system.
No in 7.1 also we dont have to do anything like that. There is a blog on this error from Michael, please go through it and understand why and how this error occurs. May be in PI7.0 you were lucky enough for not getting this error
>>3) now any how I am able to process the idoc from PI and its coming to ECC system. but it showing failed over there and giving me error message. "EDI: Partner profile inbound not available"I checked all the relevent partner prfile configuration is already there"
Check the control record of the generated idoc and see whether you have a partner profile entry for the parameters mentioned in it. If not then you need to correct them in PI
Regards
Suraj -
InfoObjects Key disappeared after BW support packages applied
Hi.
We have a serious problem, after we applied BW support packages (7.0110) all our infoobjects that are created as text only, no master data, are only displaying the text. The objects key is empty. Do anybody have a solution for this?
Koos.Hi.
We have found a work around for the problerm for know and here it is:
5.1.3 Optimizing detail object syntaxFor queries on BI universes that include only the key and medium name detail objects of adimension, it is possible to modify the generated syntax of the objects to improve queryperformance, due to some internal details of the OLAP BAPI interface.To modify the syntax:
1.Open the universe in Designer.
2.Double click the key detail object you want to modify.
3.In the Select text box on the "Definition" tab of the "Edit Properties" dialog box, changethe syntax to refer to the NAME attribute of the SAP characteristic.For example, for the objectL01 Customer Key , change the generated select syntax:[Z_CUSTOM].[LEVEL01].[[2Z_CUSTOM]].[Value] to refer to the NAME attribute:[Z_CUSTOM].[LEVEL01].[NAME]4.ClickOKto save the changes.5.Follow the same steps for the name object. Change the syntax to refer to theDESCRIPTION attribute of the SAP characteristic. -
What is Plug-in, SUpport Package, Add in and how R3 and BW are interdep
Hello Every One,
Can some one explain me in simple words about the terms, Plug-ins, SUpport Packs, Service Packs, Add-in's, SAP Notes and how R3 and BW are interdependant in the above mentioned terms? Can anyone give a simple example?
regards,
kishoreHi,
<b><u>Plug-ins:[/</u>b]
Additional program which enhances the functionality of an existing program. Additional functions which may not be needed or are mutually exclusive are often implemented as plug-ins.
For example ICMAN contains various plug-ins for the various network protocols which it supports (HTTP, SMTP, FTP,...).
The interface between mySAP.com components (for example, SAP APO, SAP BBP, SAP BW, SAP CRM) and one or more SAP R/3 systems.
The SAP R/3 Plug-In unites the plug-ins APO-CIF, CRM-R3A, BW-BCT and B2B-PRO-PI. This simplifies maintenance significantly and guarantees compatibility between the individual mySAP.com components. With SAP R/3 Plug-In, you can use several mySAP.com components simultaneously in a single system. SAP R/3 Plug-In supplies the mySAP.com component transaction data and master data in real time.
Technically, there are two versions of each release of the SAP R/3 Plug-In, a PI version and a PI-A version.
The technical names of the software components are PI and PI_A
<b><u>SUpport Packs</u></b>
A set of corrections for serious software errors in the SAP system.
Support Packages are compiled periodically and made available in the SAP Service Marketplace.
<b><u>Service Packs</u></b>
A grouping of different services for a quotation.
A service package can be agreed between a service provider and a customer within a service contract or as part of a complex service plan, which can also be additionally agreed in a service contract.
EXAMPLE
A "Winter Car Check" service package containing the following services is agreed in a contract:
Cooling water check
Brake fluid check
Battery inspection
Light inspection
<b><u>Add-in's</u></b>
add-ins are enhancements to the standard version of the system. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software
http://help.sap.com/saphelp_erp2004/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
<b><u>SAP Notes</u></b>
Documentaion Prepared by SAP for publishing clarity in case of corrections or changes happening to the SAP Software.
<b><u>R3 and BW are interdependant</u></b>
Then BW takes the Data from R/3 : so there has to be Support Pluggins which are mapped to the BW server.So the SAP Supported R/3 Versions should be used.
Eg: SAP Stoped the Support for r/3 4.0 series
regards
Happy Tony -
Hi Experts,
Iam working on some CRM datasource. I would like to know what teh Current support package is intalled in the CRM System.. can anyone explain the steps to view the current support package installed in the system please.
Thanks,
DVhi Dave,
PI_BASIS, you will see e.g 2005_1_700, means PI 2005.1
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/ad5d044ebc11d182bf0000e829fbfe/frameset.htm
Software Component Name
SAP_APPL APPL Support Package
SAP_BASIS Basis Support Package
SAP_ABA Application Interface Support Package
SAP_HR HR Support Package
SAP_BW BW Support Package
BBPCRM BBP/EBP and CRM Support Package
hope this helps. -
Dear all,
I am currently update my system.
The current version is ECC6 EHP7 based on NW7.4
SAP_BASIS 740 0002
SAP_ABA 740 0002
I would like to upgrade to SPS level 5
We use DB2 LUW 10.5
In the update phase, we encountered an error message:
SQL-error "-203-SQL0203N A reference to column "TABNAME" is ambiguou
2EETP345 s. SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL
As I can see in the log file, error messages are as below
===========================
3 ETP399 "SHPOSITION", DD30L."AUTOSUGGEST" AS "AUTOSUGGEST" FROM "DD31S"
3 ETP399 INNER JOIN "DD30L" ON "SHLPNAME" = "SUBSHLP" WHERE "AS4LOCAL" =
3 ETP399 'A' AND "AS4LOCAL" = 'A' AND "HIDEFLAG" = ' ' AND "AUTOSUGGEST" = 'X'
3 ETP399
2WETP000 06:42:38: Retcode 1: error in DDL statement for "V_DSH_ASSIGNED " - repeat
2EETP345 06:42:50: Retcode 1: SQL-error "-203-SQL0203N A reference to column "SHLPNAME" is ambiguo
2EETP345 us. SQLSTATE=42702" in DDL statement for "V_DSH_ASSIGNED "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 06:42:50: error in DDL, nametab for "V_DSH_ASSIGNED" not activated
3 ETP379X06:42:50: activating Nametab "V_DSH_TF_DETAIL":
3 ETP355Xstatements:
3 ETP399 CREATE VIEW "V_DSH_TF_DETAIL" AS SELECT DD02L."TABNAME" AS
3 ETP399 "TABNAME", DD03L."FIELDNAME" AS "FIELDNAME", DD02L."TABCLASS" AS
3 ETP399 "TABCLASS", DD03L."SHLPORIGIN" AS "SHLPORIGIN" FROM "DD02L" INNER
3 ETP399 JOIN "DD03L" ON "TABNAME" = "TABNAME" WHERE "AS4LOCAL" = 'A' AND
3 ETP399 "AS4LOCAL" = 'A'
3 ETP399
2WETP000 06:42:50: Retcode 1: error in DDL statement for "V_DSH_TF_DETAIL " - repeat
2EETP345 06:43:02: Retcode 1: SQL-error "-203-SQL0203N A reference to column "TABNAME" is ambiguou
2EETP345 s. SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 06:43:02: error in DDL, nametab for "V_DSH_TF_DETAIL" not activated
2 ETP301 ----------------------------------------------------------------------
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
2 ETP362 "2" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/03/19 06:42:38")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2014/03/19 06:43:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP301 ----------------------------------------------------------------------
2 ETP364 Begin: Act. of Shadow-Nametabs ("2014/03/19 06:43:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP301 ----------------------------------------------------------------------
2 ETP338XTouch Load of nametabs
===========================
I have checked another system which is also ehp7 based on NW740 0005, the view "V_DSH_TF_DETAIL" totally doesn't exist, but that is oracle database, here in my case is DB2 database, I have searched for SAP OSS but seems no sap notes for it.
Do you have any idea how to solve this problem? Big thanks!
Best regards,
Fresh manHi Ashutosh,
Many thanks for your reply, yes this definitely solve my problem.
But I feel quite confused what's the real reason.
Several weeks ago, I update a system (EHP7+Oracle) from 74002 to 74005, with SUM, no such problem, however this time, its EHP7+DB2 10.5, from 74002 to 74004, with SPAM, met this kind of problem...
The support packages are totally the same...
is it because I should upgrade from 02 to 05 directly? 04 has problem?
or I should update with SUM instead of SPAM?
or it is because of DB2??
or I should involve other packages like something like ST into the update queue?
Best regards,
Fresh -
Hi Experts,
Currently i am installing suppport package for PI 7.10.
SP : SAP_BASIS.
Just newly installed the sap system -> after kernel upgrade, i applied latest SPAM verion - 27.
NowBusiness package SAP -basis is in the process. I started the package three hours back. still is in the process. i chcked the log files /usr/sap/trans/tmp/SAPIB71006.<SID>
==================================================================== ).
4 ETW000 1 entry for SOTR_TEXT rejected - language not installed (00127991401D
1DEBBA864FE336A2EB85J*
4 ETW690 COMMIT "0" "1008778130"
4 ETW000 0 entries for SOTR_TEXT imported (00127991401D1DEBBA864FE336A2EB85E*)
4 ETW690 COMMIT "0" "1008778130"
4 ETW000 0 entries for SOTR_TEXT imported (00127991401D1DEBBA864FE336A2EB85D*)
4 ETW690 COMMIT "0" "1008778130"
4 ETW690 COMMIT "0" "1008778130"
4 ETW000 0 entries for SOTR_HEAD imported (00127991401D1DEBB0E8673749278B85*).
4 ETW690 COMMIT "0" "1008778130"
4 ETW000 0 entries for SOTR_TEXT imported (00127991401D1DEBB0E8673749278B85J*
4 ETW000 1 entry for SOTR_TEXT rejected - language not installed (00127991401D
1DEBB0E8673749278B85J*
4 ETW690 COMMIT "0" "1008778130"
=====================================================================
Observed that error says `entry for SOTR_TEXT rejected - language not installed`
I have not installed the language import till now. I am wondering that that could be an issue.
My logs are keep updating. symptom tells than till import is in the progress.
Could someone reply, Does the Language import must for Support package installation ?.
Now Spam screen says that `Main import ` on the screen.
Thanks
ThirumalHi Vani,
Thank you very much,
SAP_Basis package has been successfully completed. As u said language import not required to update support packages.
It took me around 7 hours to complete the update.Now i have started the Rest of the Business package.
It seems its totally killing my time. I think it shouldnot take this much time to complete a single package I need to install other packages like .
SAP_ABA, PI_Basis,SAP_BW and ST_PI.
Hi Vamshi,
Thank you. Finally package completed.
Thanks and Regards
Thirumal -
Import Basis Support Package 7.00 error
Hi All,
I wanted to apply Basis support package 9 for release 7.00 for our solution manager 4.0 system.
When i started, it gave an error in the phase ADDON_CONFLICT? stage.. The message is as below:
Phase ADDON_CONFLICTS_?: Explanation of Errors
Conflicts were found between the Support Packages that you want to
import and the Add-Ons installed in the system. To guarantee the
consistency of your system, the import is interrupted until all Conflict
Resolution Transports (CRTs) for the listed Support Packages are
included in the queue.
To include the CRTs in the queue, proceed as follows:
- Write down the Support Packages and Add-Ons that have conflicts.
- Leave this screen by choosing 'Cancel' (F12).
- Load the CRTs for the Support Packages with conflicts from the SAP
Service Marketplace or request them from your Add-On supplier.
- Define the extended queue again in the Support Package Manager.
- Import the queue. The Support Package Manager executes all steps from
the beginning.
If the problem involves an SAP Add-On, see SAP Note 53902, which tells
you which CRTs resolve the conflicts. Otherwise contact the supplier of
your Add-On for details on how to proceed.
The following contains a table of Support Packages for each Add-On for
which conflicts were detected. The column 'Information on the Conflict
Resolution' specifies how you can resolve a conflict. For more
information, select the corresponding 'Information for the Conflict
Resolution'.
Conflicts Between Add-On ST 400 and Support Packages
Software Component Release Support Package Information on
Conflict Resolution
SAP_BASIS 700 SAPKB70009 Include CRT
Can anyone guide me how to proceed.
Thanks,
Sailesh KHi Shailesh,
You are employing one or more Add-Ons in your system, apply patches regularly and want to know how the consistency of your Add-Ons is guaranteed. The list of Add-Ons installed in your system is stored in table AVERS.
During patch application the SAP Patch Manager (SPAM) checks for conflicts between patches in the queue and the installed Add-Ons. A conflict occurs if an object delivered in a patch is also delivered in an Add-On. If conflicts are detected, SPAM stops processing at step ADDON_CONFLICTS_? and asks the user to load the corresponding CRTs into his system. The attributes of such CRTs match the Add-On id, Add-On release and patch predecessor (i.e. the patch in conflict).
The patch application can only resume if all CRTs are selected in the patch queue. To resolve a conflict SPAM does not check if the conflicting object is contained in a CRT. It suffices that the corresponding CRT has been selected in the patch queue. All conflicts raised by its patch predecessor(s) are then resolved in one go.
CRTs were introduced to protect the consistency of Add-Ons during the application of patches, such as Hot Packages and Legal Change Patches (LCP). There are two types of CRTs:
1. Conflict Resolution Transports (CRT)
A CRT resolves conflicts between one patch and one version of an Add-On including all previous versions. Example:
Consider a system where Add-On IS-X is installed. During the application of patches P1 and P2 SPAM detected conflicts between the patches and the Add-On.
To resolve these conflicts two separate CRTs are required, CRT1 and CRT2. A consistent patch queue looks like this:
P1
CRT1
P2
CRT2
SPAM will only let you resume the patch application if you redefine the patch queue containing all four patches. You can see the name of the patch for which a CRT resolves a conflict in the "Predecessor" field in the patch queue dialog.
2. Collective Conflict Resolution Transports (CCRT) are similar to CRTs but resolve conflicts between several patches and an Add-On. Example:
Consider the previous example but this time the conflicts between patches P1, P2 and Add-On IS-X are resolved not by two CRTs but by one Collective CRT (CCRT) CCRT1. A consistent patch queue looks like this:
P1
P2
CCRT1
SPAM will only let you resume the patch application if you redefine the patch queue containing all three patches. The CCRT is added at the end of its highest predecessor, here P2. You can see the highest predecessor for a CCRT in field "Valid to patch#" when you scroll the patch queue dialog to the right.
Keep in mind that a CCRT describes a range of patches for which conflicts are resolved, with the lower limit being the predecessor and higher limit the highest predecessor.
Cheers,
Shyam -
Import support package SAPKB70015 at PI System is stuck on IMPORT_PROPER
Dear Expert,
I have some problem when import support package SAPKB70015 at PI System.
IT had shown as below.
Main import
Transport request : SAPKB70015
System : CXI
tp path : tp
Version and release: 372.04.08 700
sap_dext called with msgnr 4:
db call info
function: db_report_interface
fcode: UPDATE_REPORT
tabname: TEXT
len (char): 40
key: /OSP/CL_CJS_CONTEXT===========CP
retcode: 4
Main import
End date and time : 20081120021353
Ended with return code: ===> 12 <===
And I checked the transport log,It shown as below.
4 ETW690 COMMIT "360444" "53156878"
3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
4 ETW000 1 entry for TADIR updated (R3TRCLAS/OSP/CL_CJS_CONTEXT ).
4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP A replaced.
4 ETW000 dev trc ,00000 Thu Nov 20 02:13:53 2008 39924798 39.924798
4 ETW000 http://dbsloci. ,00000 *** ERROR => Cannot update a LOB column for more than one row piecewise
4 ETW000 85 39.924883
4 ETW000 dev trc ,00000 sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
e=REPOTEXT
4 ETW000 66 39.924949
4 ETW000 dev trc ,00000 prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
4 ETW000 53 39.925002
4 ETW000 dev trc ,00000 IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
0a4220,vda_p=0x111e21a60
4 ETW000 58 39.925060
4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
4 ETW000 48 39.925108
4 ETW000 dev trc ,00000 OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
11e222c0
4 ETW000 55 39.925163
4 ETW000 dev trc ,00000 lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
4 ETW000 47 39.925210
4 ETW000 dev trc ,00000 UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
4 ETW000 51 39.925261
4 ETW000 dev trc ,00000 RETURNING "DATA" INTO :A4; 29 39.925290
4 ETW000 dbrepolo ,00735 ***LOG BZY=>unexpected return code 2 calling dbrepolo#? @ 735
4 ETW000 75 39.925365
2EETW000 sap_dext called with msgnr "4":
2EETW000 -
db call info -
2EETW000 function: db_report_interface
2EETW000 fcode: UPDATE_REPORT
2EETW000 tabname: TEXT
2EETW000 len (char): 40
2EETW000 key: /OSP/CL_CJS_CONTEXT===========CP
2EETW000 retcode: 4
1 ETP154 MAIN IMPORT
1 ETP110 end date and time : "20081120021353"
1 ETP111 exit code : "12"
1 ETP199 ######################################
System information
SAP = NW2004s SR3
Database = Oracle 10.2.0.2
OS versions = AIX 5.3
Tp version = 700 Unicode 179
R3trans version = 700 Unicode 183
PS.I checked tp connect return code 0 and R3trans u2013s return code 0
Could you please suggest how to fix this problem?
Thank you very much
JaturongIu2019ve updated database statistics and then try to reimport the package again. But It canu2019t import package.
Are you still getting the same error after you retry the statistics update? -
Applying BASIS support package 14 on IDES (DB2 & Windows)
Hi all,
I am trying to apply BASIS support package on IDES. Currently process is running on IMPORT 2 step. I run in diaglog and it was continuously showing MOVE NAMETABS at the end. and in ST22 I see thousands of dumps being generated and almost all are related to SYNTAX_ERROR
Short text
Syntax error in program "SAPLSALC ".
at happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSALI" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLSALC " in include "LSALCU65
" in
line 1:
"Function "SALC_INFO_GET_TREE" not found in Function Library."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLSALI" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Can anyone of you help me on this issue.
AWAITING REPLY
Thanks> I am trying to apply BASIS support package on IDES. Currently process is running on IMPORT 2 step. I run in diaglog and it was continuously showing MOVE NAMETABS at the end. and in ST22 I see thousands of dumps being generated and almost all are related to SYNTAX_ERROR
There are a few known issues with KB70014, those are documented in
Note 822379 - Known problems with Support Packages in SAP NW 7.0x AS ABAP
Markus -
Error in Applying Java support packages through JSPM
Hi All,
While Applying support packages, Package CAF 7.00 SP 13 is through an error
help required.
For detailed information see the log file of the Deploy Service.
07/12/05 21:55:26 - ***********************************************************
Dec 5, 2007 9:55:26 PM Info: End of log messages of the target system.
Dec 5, 2007 9:55:26 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Dec 5, 2007 9:55:26 PM Error: Aborted: development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0', grouped by software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/cafUIptn~common..
Reason: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Dec 5, 2007 9:55:26 PM Info: Starting to save the repository
Dec 5, 2007 9:55:28 PM Info: Finished saving the repository
Dec 5, 2007 9:55:28 PM Info: Starting: Update: Selected software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0' updates currently deployed software component 'CAF'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.0.20060221161956''/'0'.
Dec 5, 2007 9:55:28 PM Error: Aborted: software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
Failed deployment of SDAs:
development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0' : aborted
Please, look at error logs above for more information!
Dec 5, 2007 9:55:28 PM Info: Starting to save the repository
Dec 5, 2007 9:55:30 PM Info: Finished saving the repository
Dec 5, 2007 9:55:30 PM Info: Starting: Update: Selected software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0' updates currently deployed software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.1.20060302145618''/'0'.
Dec 5, 2007 9:55:30 PM Error: Aborted: software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0':
No further description found.
Dec 5, 2007 9:55:30 PM Info: Starting to save the repository
Dec 5, 2007 9:55:32 PM Info: Finished saving the repository
Dec 5, 2007 9:55:32 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Dec 5, 2007 9:55:32 PM Error: -
At least one of the Deployments failed -
Regards,
Prashant.Hello Prashant.
Check this supporting SAP note 1010640. It will solve your problem.
This is typical problem when you upgrade from < SP8 to higher version.
You need to Undeploy the CAF components from the system using SDM first and then reply the patches from JSPM.
It should go with out errors.
Let us know if this worked.
*Reward points for helpful answer.
Regards,
Prashant P. -
Download of ABAP Support Packages for SAP Netweaver PI 7.1
Hello all,
I'm just working on upgrade SAP Netweaver PI 7.0 to PI 7.1 and we have no functional connection to SAP OSS and therefore I'm not able to aprove some Support Packages via Solution Manager.
PLEASE - Can somebody download the following Support Packages and copy it via ftp:
BW Support Package 06 for 7.10 - SAPKW71006
BW Support Package 05 for 7.10 - SAPKW71005
Basis Support Package 06 for 7.10 - SAPKB71006
Basis Support Package 05 for 7.10 - SAPKB71005
ABA Support Package 06 for 7.10 - SAPKA71006
ABA Support Package 05 for 7.10 - SAPKA71005
PI_BASIS 2006_1_710: patch 0006 - SAPKIPYN06
PI_BASIS 2006_1_710: patch 0005 - SAPKIPYN05
FTP data:
server: ftp.vse.sk
username: sap
password: Supp0rtpack
Thanks for your time and help.
Best regards,
Slavomir Kysel.Solved by SAP Walldorf.
-
What minimum Support Package level is needed in BW 3.5 / 640 to be able to
Hello Experts,
A quick question:
what minimum Support Package level is needed in BW 3.5 / 640 to be able to run the SAPGUI 7.10 (including BW add-ons)?
I am also searching at my end.
<removed_by_moderator>
Read the "Rules of Engagement"
Best Regards
Sachin Bhatt
Edited by: Juan Reyes on Jun 29, 2009 11:15 AMHi,
Refer the below link
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=30625
A. FEP stands for Front-End Patch. FEPs are the patches that SAP releases for the BW front-end components of the SAP GUI.
They can be downloaded from the SAP Service Marketplace (SMP login required), browsing to the following locations:
BW 3.5 Addon can be found at Downloads -> SAP Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> BI ADDON FOR SAPGUI -> BW 3.5 ADDON FOR SAPGUI 7.10-> Win32.
BW 7.0 Addon can be found at Downloads -> SAP Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> BI ADDON FOR SAPGUI -> BI 7.0 ADDON FOR SAPGUI 7.10-> Win32.
Let us know if u have any issues.
Regards,
Ravi -
System shutdown during support package import
We were importing a BASIS support package in our system. Then for other reasons the system shutdown in the IMPOR_PROPER phase so...the system now is corrupted.
We try to launch the import of support package again from SAP GUI but we can not, a dump is generated everytime.
Are there a posibility of launch the import from operating system to finalice the aplication of package?what are the commands to do that?
We try to avoid the recovery from backup
RegardsHi,
I don't think it is possible other than backup restore.
But already you are at worst case..i will suggest you to check the data in PAT01 and PAT03 tables at database level.
And delete all the contents from those tables then retry to login.
*Open a support message
Regards,
Nick Loy
Maybe you are looking for
-
BP appearing in search results after BP merging process completed
Hi Gurus, Can some one please throw some light on how to stop the displaying of BP's appearing in search results who have been assigned an archiving indicator (XDELE flag set) in BUT000 table. The scenario is as follows, We identify duplicate BP's, f
-
I had to wipe VISTA from my machine, and now I want to install it again
I had to wipe VISTA from my machine, and now I want to install it again, but I Lenovo never gave me a CD for it. I assumed I need to download it and then re-install visa? Is that what I have to do? Where can I get the download fot it
-
Export to Word using Adobe Acrobat 9 Pro (mac)
I get an error message when I try to export to word using adobe acrobat 9 pro for mac. Any tips?
-
Icon Sticks to Pointer in finder
When I click on an icon in the Finder it sticks to the pointer and I can't release it or move it to a new location. This happens on the Desktop or in folders. I have looked for a solution but could not find it online. I am using a Logitech mouse a
-
XSL Variables problem in WLPI 2.0
Environment: OS-Win 2k Pro, JDK-1.3.1, WLS 6.0 sp2, WLI 2.0 Gee.., the XML repository looks like it could be useful if only the XSL it processes could handle XSL variables! When trying to use XSL variables in my stylesheet, I get a 'org.apache.xalan.