Erro no DVD ENCORE para exportar e para criar menu.

Pessoal, estou enfrentando um problema vamos lá, antes de tudo, uso o pacote PAGO.
Instalei o premiere CS6 para ter o DVD encore, usei o encore e até ai tudo ótimo, ai fechei um menu, até ai perfeito...
observei que tinha um erro de Português no menu e decidi modificar, abri o programa, fiz a mudança e quando fui fechar ele me aparece dando essa mensagem de erro...
Tento abrir um novo projeto e da outro erro:
ja desinstalei e instalei tirando até as preferências, continua dando os dois erros.
Quando abro o projeto que ja conseguir fazer (o único), ele abre mas na hora de fechar em IMAGEM ou m qualquer outro formato que o programa me oferece como fiz anteriormente ele da o erro da primeira foto, o programa não me sugere solução nem nada, alguém pode me ajudar?????????

Bom dia Cristina,
Isto mesmo, preencha o valor dummy XX00000000 na empresa através da OBCL.
Fonte: System error: Default TXJCD is not filled in the table T001
Atenciosamente, Fernando Da Ró

Similar Messages

Boa noite. O problema ocorre com qualquer navegador. Hoje liguei para a Microsoft, para pedir ajuda na configuração do e-mail que aparece o erro #872. O técnico

Boa noite.
O problema ocorre com qualquer navegador.
Hoje liguei para a Microsoft, para pedir ajuda na configuração do e-mail que aparece o erro #872.
O técnico entrou remotamente e fez todos os estes possíveis e imagináveis.
Fiquei remotamente durante uma hora e trinta minutos. E ele não conseguiu resolver.
O problema não é com o outlook é com o GMAIL.
Após vários testes, agora aparece a seguinte mensagem de erro:
“Servidor respondeu: 421 4.7.0 Temporary S” pelo outlook e pelo GMAIL (#872)
O técnico da Microsoft informou que o problema é com o GMAIL.
Por favor estou desesperada, desde 10 de julho de 2014 não recebo e envio e-mail da conta:
Tenho essa conta para trabalho e pessoal, isso esta causando muito prejuízos.
POR FAVOR ME AJUDE A RESOLVER ISSO.
Desde já muito obrigada
Elisabeth
De: ****** [mailto:******] Em nome de Cesar JB via Fórum de Ajuda do Gmail
Enviada em: segunda-feira, 28 de julho de 2014 07:57
Para: *****
Assunto: Re: ERRO (@872)
Olá Elisabeth,
O mesmo problema ocorre quando você utiliza um navegador (Chrome, Firefox ou Internet Explorer) ou somente quando você utiliza um programa cliente de email (ex: Outlook).
Se estiver usando um navegador, experimente fazer a limpeza do cachê e veja se a referência abaixo sobre erros no Gmail te auxilia.
Abraço,
Cesar JB
On Sunday, July 27, 2014 10:48:00 PM UTC-3, Elisabeth Reboucas wrote:
gmail
recebo uma mensagem de erro. (@872).
sempre que mando email da minha conta principal. POR FAVOR QUEM PODE AJUDAR.
A RESPOSTA POSTADA EM 20/07/14 NAO RESOLVEU O PROBLEMA.
"Erro
Ops... ocorreu um erro de servidor e seu e-mail nao foi enviado. (#872)
OK"
a mensagem de erro esta escrita acima.
Por favor preciso de ajuda.
Obrigada.
Elisabeth
<hr>
''emails removidos para privacidade dos mesmos'' - Diego Victor

Boa Noite Elisabeth,
Sua explanação sobre o seu problema está um pouco confusa e com poucas informações, o que dificultada a melhor resposta e/ou a resposta correta. Porém que você está com problemas no uso do Gmail pelo seu aparelho Mobile, eu pesquisei alguns problemas e pré requisitos para que esse uso seja feito sem maiores complicações.
Você pode acessar o Gmail pela Internet em navegadores como Google Chrome, Firefox, Internet Explorer e Safari no seu computador. Para acessar o Gmail com um navegador instalado em um dispositivo móvel, esse dispositivo deve atender a estes requisitos mínimos.
'''Requisitos Mínimos'''
Para acessar o Gmail para celular, o navegador de seu celular deve atender a alguns requisitos mínimos.
Primeiramente, verifique se seu navegador é compatível com XHTML. Caso não tenha certeza, visite http://www.google.com/xhtml e faça uma pesquisa. Se não funcionar, seu navegador pode não ser compatível com XHTML.
Você pode entrar em contato com seu provedor de serviços para celular para verificar os seguintes requisitos:
1. Seu navegador deve ter os cookies ativados e sua rede também deve permitir cookies. A configuração de cookies geralmente está localizada nas configurações do navegador de seu telefone.
2. Sua rede deve permitir tráfego SSL seguro.
3. O navegador de seu celular deve ter um comprimento de URL de 2000 bytes.
4. O navegador de seu celular deve permitir redirecionamentos de 10.
Para usar o Gmail, ative os cookies e o JavaScript'''
Independentemente do tipo do seu navegador, você precisa estar com os cookies ativados para usar o Gmail. Além disso, se seu navegador for compatível, ative o JavaScript. Pesquise instruções no Google sobre como ativar os cookies e o JavaScript no seu navegador.
Espero que com isso você resolva o seu problema ou a menos tenha ajudado a ajuda-lo.
Um grande abraço.

Is it possible to refer to paragraph 90 for example in para 110 and for this to automatically change to para 96 if para 90 becomes para96 because of document changes

Is it possible to refer to paragraph 90, for example in para 110 of a long document and for this wording to automatically change to refer to this paragraph as para 96, if para 90 becomes para 96 because of document changes ?

What I would like to know refers to whether there is a way for a reference to a particular paragraph number in a document can be automatically updated if that paragraph number changes becasue of other alterations to the document e.g can a reference to paragraph 90, in para 110 be automatically updated to refer to this paragraph as para 96, if para 90 becomes para 96 because of document changes ?

¿Alguien sabe como activar la opción de "tocar para hacer clic" para el trackpad?

¿Alguien sabe como activar la opción de "tocar para hacer clic" para el trackpad?

Siempre se puede ir a comprar un simple caso de ella, y hacen un buen trabajo de proteger a la parte de atrás.

Les photos chargées de mon iphone 5S par cable ou par mail ressortent anormalement fonçées, que faire svp ?

pourquoi les photos prises par mon iphone 5S 8.1.3 et chargées sur mon mac OS10 aussi bien par cable que par mail ressortent trop foncées sur iphoto, dernière version itunes installée 10.2 que doit je faire SVP ?

Scrollbalken mit DVD Encore

kann man im DVD Encore auch eine Scrollbalken erstellen, wenn z.B. bei einem Menü ein zu langer Text benötigt wird?

Scrollbalken sind auf DVD nicht möglich,
kann von DVD Player nicht verarbeitet werden.
Es ist besser ein zweites Menü über next
Button zu bauen.
MfG Martin

DVD Encore subtitles

I built a rather complex project with DVD Encore v-2.0. Three languages - English-German -Hebrew. I use FAB script oriented subtitles (pictures) The whole project is appr. 3 hours.
When I try to either make a folder or imagefiles the programme says: "creating subtitles failed ..." or "Out of memory" . In other words all my work (took me about a week) is in vain. I phoned Adobe Technical Support, but nobody seems to understand what the problem is or they denie that it exists att all!!!!
Please is there anybody who can solve my problem.
Best regards,
Janjens Molenaar, Blaricum, Holland

Have you tried to compile the project without any subtitles? Have you tried with English, then German, then Hebrew to see if it's just one particular language that is not being accepted?
I've been working on a series of music DVDs over the last 6 months that are fairly subtitle intensive. I'm using 3 languages (English, Spanish, and Italian) with 2 copies of each subtitle (one at 100% from the top and one at 0% from the top) to give the user the choice of where they want to view the words.
I'm using a 32 pt Arial regular font for all languages and haven't had any difficulties since I started creating my STs in Lemony Subtitler. I export them in Encore 1.01 text format and they import perfectly into Encore 2.0.
When I first started trying to create STs within Encore, I got a lot of out or memory type errors and save project now errors, which is very unusual for my machine. I suspect these errors occurred as the result of constant back and forth tweaking of each ST segment to make sure it lines up properly with the music. Apparantly, Encore doesn't like all that stopping and starting and moving STs up and back on the timeline. I never lost anything, but it scared me enough (I know how long it takes to create accurate subtitles) to buy a good subtitler like Lemony.
Since then, all has been fine, not to mention that I can very easily store txt versions of all my subtitles from Lemony for later editing. Encore doesn't save subtitles in this way since it automatically converts them to graphics.
Peace, BJ

Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode".

It only does this on Reading Rainbow DVDs so far: Using DVD Player, the show goes back to menu after every chapter, even though I selected "Play Entire Episode". It does this whether the laptop is plugged in or is using battery power. How do I get it to play all?? Thanks.

Turns out it was NOT the software or the Mac. I bought a portable DVD player and this problem happens with it, too.

My DVD's dont' start at the main menu?

Hi there,
I've created a DVD with two menus..the first menu has 5 buttons..the bottom button takes you to another submenu. It all works fine when I "simulate". I burn it..put into my DVD player..happy days..all working..but when I put it into my laptop it skips the first menu and goes straight into playing the clip.
I'm stating "first play" for that menu...is there something else I should be doing? maybe something in the "inspector pallet"?
Hope you can help.
Carol Ann

It could be something really simple like your DVD Player application preferences - you are able to set it up so that your disc starts playback automatically when inserted, and always goes to the last point it was at previously. I have mine set to 'always ask', but if you haven't then it can skip over the first play item and start playback from wherever it was before.
Check DVD Player preferences 'Player' tab and 'Previously Viewed' tab.

Replicar erro na Falha de Schema do XML para o ECC

Boa tarde pessoal,
estamos fazendo a migração para a versão 3.10 do XML e me deparei com uma situação que antes não acontecia com a versão 2.0.
Ao emitir uma NF-e e havendo erro em alguma informação o SEFAZ retorna erro 225 porem somente é possivel visualizar no monitor do GRC qual informação está incorreta onde na versao anterior o erro era replicado para o ECC.
Agora a pergunta; isso está correto onde a partir de agora somente será possivel visualizar no monitor GRC ou alguem tambem se deparou com esse problema e encontrou alguma nota?
Obrigado.

Bom dia Carlos,
Em sendo a Sefaz GO a inconstância não me surpreende, mas a de se estar atualizado, principalmente com o removedor de caracteres e validador ativo para evitar a chance do programa da Sefaz se confundir que é o que parece estar acontecendo... Está apontando o problema num lugar onde a mensagem apresentada está ok.
Sugiro atualizar o sistema ao SP18 que é o necessário para trabalhar de forma saudável com layout 2.0
Atenciosamente, Fernando Da Rö

PANTONE para exportar a Illustrator

Tengo un diseño de logo en Photoshop (necesario para dar volumen y sombras especiales que no puedo hacer en Illustrator o Corel Draw)
Pero no logro que al importarlo a Illustrator, para el arte fnal, mantenga el Pantone 661 C que le asigné.
He intentado guardar en formatos EPS CS2, Tiff, PDF, etc. Nada me funciona. Alguien quiere evitar un loco mas en el manicomio? Es urgente!
Gracias por su ayuda

Alex:
Desafortunadamente Illustrator no ha llegado todavía al grado de avance en la administración de colores que tiene Photoshop.
Eso por un lado, por otro tengo entendido (sin saber por qué) los valores de Pantone han cambiado según el libro de colores.
De cualquier manera, he leído en el foro de Photoshop en inglés varios mensajes como el tuyo, y ninguno ha tenido una respuesta satisfactoria, a pesar de que han intervenido en esa discusión varios ingenieros de Adobe.
Como yo no uso el Illustrator para nada que sea de color, ignoro si esas conversaciones se han resuelto en los foros de Illustrator. Si lees el inglés, te sugiero darte una vuelat por allá.

DVD Encore 2.0 my first thoughts

Having completed my first major project in Encore 2.0 I thought I would share some of my experiences. My project was basically a family album DVD I had been meaning to do for years. The content for this DVD consisted of
About 350 scanned photographs
About 200 digital photographs
Video Footage taken on a MiniDV camcorder
Motion Menus with Audio sound track
There are about 30 menus in the project mainly because there is a family tree and each person has their own menu, and there are sub menus for weddings etc.
b Thoughts having built the project:
Apart from one time, when I was having major problems with the UI taking forever to respond, I have really enjoyed using Encore 2.0 which came as part of my recently purchased production studio.
I like the UI and the ability to use a flowchart to define the flow of content. I also like the ability to tailor existing menus or design new ones in Photoshop.
My only negative thought about Encore 2.0 is the way it handles assets when the application regains focus. In short, if you are (for example) editing a menu in Photoshop and then return to Encore it enumerates all of its assets again. If you have, as in this project, 500+ stills this is just a no no. So my work around this was to create a mpg slide show in another application and import this as a single asset into Encore. The only downside of this is that you loose the ability to have file names as subtitles. But given that, by adopting this approach, the UI delays reduce to a very acceptable level, I think the benefits far out way the drawback.
b One major advantage of handing stills in this way is that disk rendering time is reduced from 3 hours to 5 minutes a definite improvement :)
In short I like it and if anyone has the production studio premium and hasnt yet played with Encore I would recommend they give it a try
Dave

Avoid the use of WMA files at all costs.
These are not DVD compliant, and will therefore need to be transcoded.
If they are already compressed you will be recompressing an already heavily compressed file and it will sound dreadful.
PCM (or WAV) is far superior - it is uncompressed. However, the bitrate is larger by a significant degree, and will rapidly eat into your video space.
If the video duration is not too long ( under 1 hour), and the project is a single layer disc, this is not an issue.
For longer running times though, allow Encore to turn the WAV file into a Dolby Digital file instead - the drop in quality is barely perceptible to 99% of users.
Make sure the source is at 16/48 resolution - avoid using 44.1KHz files as they will have to be padded with zeroes. It will not degrade the sound, but it will not help matters either.
Stills.
There is absolutely no point at all using any other resolution over 720x480 for NTSC, and 720x576 for PAL.
If you can, you should set the PAR in CS2 - there are even nice, helpful presets for you.

Having tbl making dvd-encore cs4,win 7,64bit

looked on forum for win 7 encore cs4 Win 7 troubles and found 2, turn off power saver and download some Roxie file. Did both but still freezes, not responding and have to end session, one at 12 min left, and now 2 min left. Also can't eject dvd, have to turn off computer. This is a SD dvd, 90 mins total time, the 1st encore project with new i7 computer, --last night it did burn it but the last 10 mins weren't there. Transcode is automatic. Any ideas--I'll see if I can work on this project in my XP computer, never had any tbl with XP....

Thanks for the reply, I will look into your ideas. I don't have screen saver on and no Nero, iTunes was downloaded with Quicktime and I beleive Win7 uses Roxio, I will check these out.
I put the hard drive docking station back on the XP windows quad core computer, the project was edited on this machine.
Encore burned the dvd complete EXCEPT now no sound, only the menu sound. When I play the timeline there's no sound. This seems to happen when I make a change in PPRO and then go back to Encore. I then export the audio from PPRO and bring it into Encore as an asset, drop it on audio 2 and then all is fine. I did that just now and still hear no audio. I've been using Encore for a year and no troubles. Glad I make the SD dvds 1st before the HD so I don't waste blu ray discs.
My win7 computer is a Dell with Win7 Ultimate, 12 GB ram, i7 920 processor, 1TB C drive and I use external drives to edit on in a docking bay with esata cable.

Burnning dual layer dvd Encore CS5.5 errors out.

Here is the greatest error I have ever seen.
I got to burn a dual layer dvd transcoded from AVCHD 1080i with fallowing settings.
Edited footage in PPro and send to Encore via Dynamic link, created dvd project using Mpeg2 with 9mbps, Dolby 192 for Audio.
File size to be burned on dvd is 5.67gb, aprox 1 hour 10 min transcoded with 9mbps, 720x40 wide screen, audio is 192kbps Dolby.
There are three menus one is main and tow sceen selection menus, noting fancy everything as default. menus linked as usual nothing fancy and and it is very basic.
All assets, that used for motion menus and main video is transcoded fine, but when it gets to put dvd together I get this error
Encore starts organizing videos for disk and after that it gets to this above and thats it. Press ok Build progress box gives fail message and option to Ok it. After pressing Ok button this box goes away to build panel.
I have tried to change an Automatic layer break to manual still get the same error, I have tried a custom layer break and still get the same error again, I have tried dvd, and an image, and folder for dvd, still the same error there to. I have redone project from scratch and still got the same result.
However previously I have burned many Dual layer dvds using the same method described, and same settings described, and never had this problem.
Nothing on the PS was changed except the updates installed regularly.
Anybody have any Idea what is this all about? Because I just burned 16 Blu Ray discs, and 16 Dual layer discs on one of the project, and next one a day latter this happens.

I'm having the same problem. not once did it, the encore was automatically break in the case of dual layer dvd. now he does not. I mark the box DUAL LAYER 8.54gb, do DVD disc or image or folder, or change the marking of the layer break from automatic tomanual, and it does not. in the end he always gives the message: duallayer requerid.
wanted to know how to do this manually break, because even in the manual or here on the website of adobe, has no suchinformation. does not show clearly how to manually break. please if someone can give a help, thank you.

Can't Burn DVD:Encore Error code 5A803

I'm working with the CS3 suite and whenever I try to burn a DVD the following message comes up: Hardware error sense code 5A803. Pleae contact harware manufacturer.
I'm working with a Pioneer DVD burner, I was able to import an ISO file and burn that to DVD using Nero but every effort to burn from Premiere via Encore brings up the 5A803 error message.
Help, please send help!
Thanks,
Flip

Flip.
Firstly, please don't make multiple posts on the same problem. Once is enough.
Secondly, I strongly suspect that your Nero installation is the cause of the problem. Did you allow it to install the Packet Writing utility? If so, please see the FAQ for details on how to avoid this issue in future.
http://www.adobeforums.com/webx/.3bbe7ec0

Erro no DVD ENCORE para exportar e para criar menu.

Similar Messages

Maybe you are looking for