Erro "Partner not reached" - web service from ABAP

Hi.
I wrote a a sample web service call from abap program from net.
But, when I executed, i am getting error 404 resource not found, partner not reached.."Connection request from (19/1132/0) to host: www.webservicex.net, service: 80 failed (NIEHOST_UNKNOWN)"..
Not sure if any settings need to be done before running this ABAP program..
Pl let me know how to proceed further.
Thanks & Regards
Krish

Hi,
You should check if your server has internet access, may be there is a proxy who block the access.
If you have a proxy you can configure your proxy settings via SMICM.
Regards, Gilles.

Similar Messages

How to consume WEB SERVICES from ABAP ??

Q: How to consume WEB SERVICES from ABAP program??
     the point here is i am using SAP release 620 and the creation of proxy is out of scenario
     and also no XI.    Its only through ABAP program i need to consume one web service (its a HTTPS one ),
    Using cl_http_client... i tried it but i am totally confused of whats happening ???
Req some senior ppl advice on the same/approach.
any hints will suffice my way of approach...!!!
Please do put in your valuable advices..!!
Thanks in advance..!!!!

Hello Srinivas,
Following is the code for calling web service:
data: client type ref to if_http_client,
      host   type string value 'server url',
      service type string value '8080',
      path type string value '/sap/public/ping',
      errortext type string,
      proxy_service type string,
      scheme type i value 1.
call method cl_http_client=>create
exporting host = host
        service = service
     proxy_host = host
   proxy_service = service
   scheme        = scheme
importing client = client
exceptions
    argument_not_found = 1
    internal_error     = 2
    plugin_not_active = 3
    others             = 4.
case sy-subrc.
when 0.
     write 'Server reached successfully'.
when others.
     write: 'sy-subrc =', sy-subrc.
endcase.
Once you got the client object you can call following methods:
"Set the requrie URL for the web service you want to call. This is not WSDL anyway!!
cl_http_utility=>set_request_uri( request = client->request
uri =' url 2 be called ').
*Then you can call send method with proper inputs for sending request to WS
CALL METHOD client->send
Then you can use receive method for getting the response
CALL METHOD client->receive
*You can get last error in case of exceptions
CALL METHOD cl_http_client=>get_last_error
*Close the client object
CALL METHOD client->close
For more information on full code refer my link in previous replay.
Thanks,
Augustin.
Edited by: Augustarian on Aug 18, 2009 1:49 PM

Error during creation of web service from abap rfc

Hi,
I'm creating a web service from abap rfc (SE37), but at the end of Creation Wizard I have this error:
"web service object already exist".
This is my first web service creation. Into WSADMIN there are not web services with the same name.
How can I solve this problem?
Thanks!

Hi,
What system/release/SP do you use ?
Beginning with Netweaver 7.0 SP14, you configure Web services with SOAMANAGER and you don't see them with WSADMIN...
Regards,
Olivier

Windows authentification while consuming web service from ABAP

Hi All,
We are consuming web service from ABAP, we have created client proxy in SE80 and configured logical port in LPCONFIG.
This one was working fine. Now we have added windows user authentification to access this service.
Now when I'm trying to regenerate this proxy in R/3 it is asking for user and password. When I enter these details this one is not working.
If I access this service direcly from internet explorer and I enter same user and password then I would able to access this service.
Could you please let me know how to handle this.
Regards
Vikram

The dialog that is produced by HTTP Destination object of the logical port is designed only for use within Classic Dynpro applications. There is no prompt produced when running in Web Dynpro. If possible assign a generic user within the logical port definition and this will be used automatically by all users.

Create an SAP Web Service Consumer (calling External Sharepoint Web Service from ABAP)

hi all,
i am trying to
Create an SAP Web Service Consumer (calling sharepoint Web Service from ABAP) using blog given on following link
Create an SAP Web Service Consumer (calling External Web Service from ABAP)
but when i am using my url at the end of step 3, i am getting error as follows:
i dont want to use local file option. Can anyone help me in this??
thanks in advance
regards,
SDS

Hi SDS,
you recieved a http 404 error when trying to access the Sharepoint Web service. Http 404 indicates that the resource is not reachable (cf. HTTP 404 - Wikipedia, the free encyclopedia). There could be different reasons for that. I'd suggest rubble checking the URL of the Web service first. Try to access it from a browser on you desktop. If the URL is correc. Most likely the SAP system is not able to connect to the URL. This could, for example, be due to some firewall restrictions. You should ask a SAP Basis colleague if they are able to access the URL of the Web service from the server on which the SAP system is running.
Christian

Calling web service from ABAP - version 4.6C

Hi,
I would like to know how to call a web service from ABAP. Version is 4.6C. Any help would be greatly appreciated.
Thank you,
Rekha

Hi Rekha,
Please go through these..
call web service using ABAP
http://help.sap.com/saphelp_nw04/helpdata/en/a0/da0710b6560a4e80fb94f3f712dfc0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/frameset.htm
Hope these help you!
cheers,
Prashanth

Is it possible to call web service from ABAP SAP 4.6 c..If yes how

Hi Friends,
Is it possible to call web service from ABAP-SAP 4.6 c..If yes Could you please let me know how.
Thanks in Advance.
Murali Krishna K
Edited by: Murali Krishna Kakarla on Jan 26, 2008 7:09 PM
Edited by: Murali Krishna Kakarla on Jan 26, 2008 7:11 PM

Olivier CHRETIEN wrote:>
> Hi Terry,
>
> So these function modules must use the SAPHTTPA RFC destination which uses the exe saphttp.exe ?
>
> How much abap code lines do you have for a web service call ?
> Do you have to code the call specifically for each different web service ?
> Are you able to use the WSDL ?
>
> Nice job if you have coded your own private SOAP runtime !
>
> But I don't think this is an easy solution for everybody...
>
> Regards,
>
> Olivier
Yes, SAPHTTPA (runs on application server) and/or SAPHTTP (runs on front-end pc), one of which, is required for HTTP communication. So far, nothing too elaborate as far as SOAP goes, but the logic is simplistic. Here's some sample code:
DEST = 'SAPHTTPA'.
TRANSLATE HOST TO LOWER CASE.
MYURL = 'wssrvTest/Service.asmx/GetByOrderItem'.
CONCATENATE HOST MYURL INTO MYURL.
REQUEST_HEADERS-DATA =
              'Content-type: application/x-www-form-urlencoded'.
APPEND REQUEST_HEADERS.
CLEAR REQUEST_HEADERS.
*........Convert Order Number to External Format........................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
            INPUT = ORDER
       IMPORTING
            OUTPUT = ORDER.
*........Convert Item Number to External Format.........................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
            INPUT = ITEM
       IMPORTING
            OUTPUT = ITEM.
*........Convert Material Number to External Format.....................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
            INPUT = MATERIAL
       IMPORTING
            OUTPUT = MATERIAL.
CONCATENATE 'sOrder=' ORDER
               INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CONCATENATE '&sItem=' ITEM
               INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CONCATENATE '&sMaterial=' MATERIAL
              INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CALL FUNCTION 'HTTP_POST'
       EXPORTING
            ABSOLUTE_URI          = MYURL
            RFC_DESTINATION       = DEST
            BLANKSTOCRLF          = 'X'
       TABLES
            RESPONSE_ENTITY_BODY = RESPONSE_BODY
            REQUEST_ENTITY_BODY   = REQUEST_BODY
            RESPONSE_HEADERS      = RESPONSE_HEADERS
            REQUEST_HEADERS       = REQUEST_HEADERS
       EXCEPTIONS
            CONNECT_FAILED        = 1
            TIMEOUT               = 2
            INTERNAL_ERROR        = 3
            TCPIP_ERROR           = 4
            DATA_ERROR            = 5
            SYSTEM_FAILURE        = 6
            COMMUNICATION_FAILURE = 7
            OTHERS                = 8.
CHECK SY-SUBRC = 0. "more appropriate msg goes here
LOOP AT RESPONSE_BODY.
    IF RESPONSE_BODY+0(7) <> '<string' AND
       RESPONSE_BODY+0(8) <> '</string' AND
       RESPONSE_BODY+0(5) <> '<?xml'.
      SPLIT RESPONSE_BODY-DATA AT '=' INTO FIELD_NAME FIELD_VALUE.
      TRANSLATE FIELD_NAME TO UPPER CASE.
      CASE FIELD_NAME.
        WHEN 'HEIGHT'.
          HEIGHT = FIELD_VALUE.
        WHEN 'WIDTH'.
          WIDTH = FIELD_VALUE.
        WHEN 'LENGTH'.
          LENGTH = FIELD_VALUE.
        WHEN 'WEIGHT'.
          WEIGHT = FIELD_VALUE.
        WHEN 'QTY'.
          QTY = FIELD_VALUE.
      ENDCASE.
    ENDIF.
ENDLOOP.
Hope this helps...
Terry
Edited by: Terry West on Feb 4, 2008 3:08 PM

Call webdynpro java Web Service from ABAP

Hello,
This is regarding calling portal web service from ABAP.
1. created web service in NWDS and deployed it to portal server
2. created abap proxy to call this web service from abap SE80 transaction
3. created logical portal for the above proxy LPCONFIG transaction
this is working perfectly. the web service is getting called from abap and funcitonality is working
but my doubt is we have no where given the login password for portal server in the abap system
then how come it works without login password
if i run this web service directly from portal in wsnavigator, then portal login is required.
If we want to incorporate authentication then how to do that ?
thankyou,
B

When you are testing the application in SE80.
Is it ot asking for the user id password.
I created a similar service and for me its asking for user id and password.
Go to SM59 and there look for a RFC destination of type HTTP Connection to External Serv. usually will be named as
SAP_PROXY_ESR.
for this connection check the logon and security tab.
may be some user id and password is given there. means hardcoded.
thanks
sarbjeet singh

Calling external web service from ABAP Program

Hi All,
Can somebody point me to the documentation where how to call an external (3rd party) web service from ABAP program is explained?
Thanks & Regards,
-Smita

which version of R/3 you are using. if you are on was 6.40 its very simple, there are delivered tools to generate client proxy for consuming webservice. if you are on wa 6.20 you can use cl_http_client to achieve the same. check out the following weblogs.
/people/durairaj.athavanraja/blog/2005/07/12/send-sms-to-india-from-abap
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Regards
Raja

Web Services from ABAP function modules return values- leading zeros

I am using several web services from SAP CRM (5.0) that were created from Function modules ( I am assuming that that they are in ABAP).
I can call the web services fine and they work as expected, but I am seeing a lot of leading zeros in the return values of fields in tables from the Web service.
The ABAP ers are telling me that they cannot see the leading zeros.
So my question is where these are appended to the values in the whole process. When I execute the Function Module in SAP CRM from transaction SE37 I can see the leading zeros. So I think that this is something that has to be handled by the ABAP ers and not in the client consuming the web service.
Are the functions in SAP CRM that can remove leading zeros for fields in a table (that is an export parameter?)
Jawahar

Hello Jawahar
If you run your (RFC-enabled) function modules using the SAP-GUI (i.e. in dialog) then the GUI automatically replaces leading zero when the function module returns any data. However, calling the same function module remotely you will always see these leading zeros.
These so-called conversion exits are defined as attribute of domains in the ABAP dictionary. If the function module used for the WebService is a standard fm then you have little chances to get rid of the leading zero. Perhaps the WebService has some attribute to suppress conversion exits or activate them when retrieving the data.
Regards,
Uwe

Consume External Web Service from ABAP

Hello All,
I have a Web Service existing on a Non R/3 system.
I want to access this Web Service from my Development system (SAP 6.40).
I created a Client Proxy pointing to this WSDL named "ZUSER_ARS_EXCHANGECO_UPDATE".
I have created an FM to call this Web Service and update the data to it with the following code ->
DATA: lv_proxy TYPE REF TO zuser_ars_exchangeco_update,
        ws_header TYPE REF TO if_wsprotocol_ws_header,
        sys_fault TYPE REF TO cx_ai_system_fault,
        appl_fault TYPE REF TO cx_ai_application_fault,
        lv_request TYPE zuser_ars_exchangecreate_soap1,
        lv_response TYPE zuser_ars_exchangecreate_soap.
TRY.
      CREATE OBJECT lv_proxy
      EXPORTING
        logical_port_name = 'TO_ARS'
    CATCH cx_ai_system_fault .
ENDTRY.
MOVE-CORRESPONDING ip_userdata TO lv_request-parameters.
TRY.
      CALL METHOD lv_proxy->create
        EXPORTING
          input = lv_request
        IMPORTING
          output = lv_response.
    CATCH cx_ai_system_fault INTO sys_fault.
      IF sys_fault IS NOT INITIAL.
        RAISE proxy_create_system_fault.
      ENDIF.
    CATCH cx_ai_application_fault INTO appl_fault.
      IF appl_fault IS NOT INITIAL.
        RAISE proxy_create_appl_fault.
      ENDIF.
ENDTRY.
But when I am trying to execute, I am getting the error "cx_ai_system_fault " with the following Error Text -> "ARERR [149] Im Steuerungsdatensatz muss ein Benutzername angegeben werden." When translated to English, using Google, it is "ARERR [149] The control record must be a user name."
The WSDL has a line as follows -> soap:header message="s0:ARAuthenticate"
How do I pass the username and password to this "ARAuthenticate" parameter?
Can someone please help me in getting this fixed?
Thanks and Regards
Gladson Jacob

I created an HTTP RFC Destination to the WSDL URL and provided the username and password in the RFC Connection. And called the RFC Destination in the Proxy, instead of calling the URL directly in the proxy. But after that, I am getting some new errors, for which I have not received a solution yet. So, still stuck!!!
For steps on creating a Proxy, I need to know the ABAP version your are using.

Consuming Web Service from ABAP Web Dynpro

I have written program to consume KM Web Service through ABAP as well as ABAP Dynpro in SAP R/3 by calling Consumer Proxy.
When I run the program from SE38, it prompts me for user-id & password. If I pass KM Server user-id and password I am able to execute the web service successfully.
However, while I execute the same code through Web Dyn-pro , it does not ask for user-id and password & terminates with CX_AI_SYSTEM_FAULT : SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 401 : Unauthorized")
I have created a Logical Port in R/3 & I am using this Logical Port while creating an Object of Consumer Proxy.
Kindly let me know how to resolve this issue.

The dialog that is produced by HTTP Destination object of the logical port is designed only for use within Classic Dynpro applications. There is no prompt produced when running in Web Dynpro. If possible assign a generic user within the logical port definition and this will be used automatically by all users.

What is the use of a proxy client to test web service from ABAP code?

In NW640, we need to create a proxy client to test our web service from a ABAP code.
Why is this so? What is the significance of a proxy client? Is this mandatory? Can we test the webservice from a ABAP code without proxy client?

Hi Gopal,
There are two types of proxies that can be generated from ABAP - the client proxy (to call an internet web service) and a server proxy (to communicate with XI). It sounds to me like you are looking for information about the client proxy, if so you can see the following link from SAP Help:
http://help.sap.com/saphelp_nw04s/helpdata/en/e5/a68d10f4eb894087fc9c1c3f9ae433/frameset.htm
Hope this helps.
Sudha

Problem with consuming web service from abap

Hello,
I want to consume this web service VatatWebService Web Service From SAP.
The transaction code soamanager doesn't exist in our system, i'm the only man who use SAP in our company(we don't have BC peoples....).
I find some advice to use "wsadmin" and "lpconfig", but i do not know the step: wish data i have to fill in in tcode "wsadmin" or "lpconfig".
I'm very new in this case...
Is there any doc showing the step to consume a web service?
Thank u very match.
Ouail

Hi,
Have you tried to search using that magical tool called Google? If I search for "SAP LPConfig" I get lots of promising looking answers:
You could also try searching help.sap.com
I appreciate you are new but one of the best skills you can learn in the world of SAP is how to search out and find information, so you aren't dependant upon SCN and/or others to help you when you get stuck.
Cheers,
G.

Consuming Web Service from ABAP

I'm using WAS 6.4 SP10.
I'm trying to consume a web service from our Intranet using instructions from ABAP256 from Teched 04.
I get an error when I try to create a Proxy object.
From SE80
Enterprise Services>Create>Proxy Object
URL/HTTP Destination:
http://server/ServiceGATP/ServiceGATP.asmx?wsdl
HTTP error (return code 400, message
"ICM_HTTP_CONNECTION_FAILED")
I've tried with ABAP web services and that works great. But no success with non ABAP Web Services.
From internet explorer the URL above seems fine. I can call it from a .NET application and it works great.
Any suggestions?
Could it be a system setup issue.
Regards,
Lavaughn

Hi Lavaughn,
Try maintaining HTTP proxy setting using transaction SM59->RFC->HTTP Proxy Configuration. I suspect your WAS server also need to use proxy server for accessing internet.
Regards,
Sanjeev

Erro "Partner not reached" - web service from ABAP

Similar Messages

Maybe you are looking for