Erro while executing query using BWA

Hello BWA experts,
I am facing a issue while running a query by using BIA. I get error message as "Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTIION.
My querz contains one basis key figure in the column and a charateristic say company code in row. In free characteristic, I have sales document no. The qeury executes without any issue at first. But when I go to 'sales document no' in the free characteristic area and select filter values, this error pops out. This document no cannot be removed due to customer requirements.
If I restrict the query output with selection, then it is able to execute & filtering can be done without and errors. Also if I activate not to use BIA in tcode 'RSDDBIAMON', the query executes & filtering can be done whithout and errors.
If I change the query & put 0doc_number in the drill down and execute for the same selection, I get error as follows,
Error subfield access to table (row3, column 0 to row 3, cloumn 0) outside of
Error Serialization/Deserialization error
Error An an exception with the type CX_TREX_SERIALIZATION occured, but was neither
Error Error reading data of infoprovider XXXXXX
Error Error while reading data, navigation is possible.
I was suggested by SAP to increase the max_cells_one_index parameter to 200 million. We are on revision version 53 and the current value set for max_cells_one_index to 40 million. They also mention with a caution that 'by changing this parameter it will bring more load to BW servers'.
I would like to know how the bw server load would increase by increasing this parameter. Will there be any another impact on the BIA or BW servers.
Secondly, how is the value arrived to give a memory out , serialization error.
Also will this kind of an issue be solved in the next revision version? I know that revision version 54 is available.
Please help.
Thanks,
Sandeep

Hi Marc,
Thanks for the explaination.
I am not able to even evaluate the amount of data with this document no in the drilldown. When I run this report I get an abap dump "TSV_TNEW_PAGE_ALLOC_FAILED".So I guess the no of documents must be very high. Is there a way to check in BIA Monitor the no of documents returned after execution, for a particular selection.
However, I have come accross a note '1157582' which talks about spiltting the result set in different data packets. Will this be helpfull in any case? Currently I see that the parameter 'chunk_size' is set to zero
Thanks,
Sandeep

Similar Messages

Error while executing query in OLAP server

Dear all,
we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
in today's run APD got failed with error message as below
"@5C\QError@ Fiscal year variant Z3 is not maintained for calendar year 9999
"@5C\QError@ Error while executing query in OLAP server; redesign query.
Please suggest corrective action .
I have tried executing manually with less selections on creation date by no success..
regards,
puru

Purushotham wrote:
Hi Jeeth,
>
> in query we have selection for " currency type " and created on " .we are not using fiscal year variant.
>
> in first strep of APD design only we have a problem and also recently there are no changes to this APD .
>
> It was executed perfectly on till 4th .
>
> Edited by: Purushotham on Feb 6, 2012 12:48 PM
Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
Edited by: Arun Bala G on Feb 6, 2012 4:05 PM

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Error while executing query in BEX

Hi All,
I am experiencing an issue while executing query on FIAR_C03.
"Abort No Values could be determined for variable 0P_FVAEX
Error specify a value for 0P_FVAEX
Abort system error in program SAPLRRKO and form APPEND_KHANDLE_1-01-
I had searched SDN forums and found the similar error which is inculded in the below link:
Bex Variable
However, the solution specified is only for a particular 3 queries. Also the solution is that the 3 queries(Which are having errors) are replaced by another 3 queries.
Can anybody help us in this regard.
Regards
YJ

hi JY,
try 858477 steps for other 'infected' webtemplates ?
try implement correction in 660514 ?
(also search other notes with keyword 0P_FVAEX
e.g 585202)
hope this helps.

Error in while Executing Query in the Query Designer

Hi,
I created info Set based two info object and three Data Store Objects. and join condition is Left Outer Join.
there are Business Partner info object, CRM BP Sales View Info Object and Data Store Objects are BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
and i creted variable for this info object.
it gives the Error Messages
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
it is very urgent , can any one help me regarding this.

Hi Reddy,
The Error message in english is this
While reading the data mistakes have appeared. Navigation is possible
The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
Try this and let me know.
Thanks,
RK

Error while executing query through rsrt

hello experts,
I am facing following error while executing one HR query through rsrt.
"System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) "
while executing query through rsrt it automatically goes to debug mode, coming out of debug mode i get the screan showing above error message.
What would be an issue?
Regards,
Nirav
Edited by: Nirav Shah on Apr 21, 2008 8:19 AM

Hi ramesh,
I havent kept any execlusion selection. Though i saw long text, it is like this:
"Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299 "
Regards,
Nirav

Error 0DAT while executing query

Hello All,
While executing query in query designer I am getting following error.
Component 0DAT version A does not exists in the database.
Can any one please let me know how to rectify this error.
Points will be rewarded.

Hello,
Thanks for your prompt reply.
I am looking for 0DAT in BC (object type) but could not able to find it.
I am new in BW :
Do I have to search BC in r/3 and replicate in BW then install and activate it ?or I will find in BW only?

While Executing Query with out giving any inputs to selection variables

Hi,
While Executing Query in the Query Designer with out giving any inputs to selection variables. I got an error message in german Language this is translating of german to English .
In the reading of the data, mistakes appeared. Navigation the value is contains possible "New Delhi" of feature 0CITY40 at that
10. ten place a mistake Notification Number BRAIN 290
This is very urgent can you please help me .
Thanks & regards
Subba Reddy.

Double click this error message it will give you more details. Post that.

How to get Quername while executing query in CMOD

Hello,
I have written some code for giving authorization to the users while excuting query,
i need to find users with role YB_CRM_MN_ADMINISTRATOR which i can get through FM CRM_ROLES_OF_USER_GET.
After that I need to find the query it is executing, if it is ZZCMI0UO01_Q0002 the user should have all the access to view all the data in the query or have limited data access.
how can i get the Query name at runtime ??
Thanks in advance.
regards,
Mahesh

The result of the query is normally shown via an iterator which ids bound to a vo. After the query is executed you can check the iterator (estimatedRowCount >0) and then insert a message.
Got this you need to use your own query listener (sample for this http://andrejusb.blogspot.de/2008/11/adf-query-component-and-view-criteria.html) here you execute the query and after that get the estimated row count.
Timo

ORA-01722: Error while executing query in Query Designer

Hi All;
I am getting the below error while executing a query
ORA-01722: invalid number
Error reading the data of InfoProvider
Error while reading data; navigation is possible
Have anyone encountered this before? How do i resolve this?
Thanks!
~ Arun KK

Hi,
Did you checked all the setting required to run this query are present in the Qualtiy system??
Which means all the characteristics,key figures are in active state.
Also all the cubes are in active state with no issues with the involved in the dimensions used for the query.
Also do a check in the query and if you have authorization try to save the same query and execute the saved one again in quality and see if the same error happens again.
Thanks
Ajeet

CX_SY_NO_HANDLER Error While executing query in RSRT T-Code

Hi Experts,
I have created a data source extraction using function module.
Then i have created customer exit variable, dso, infocube and all....
my variable name is ZWBS_VAR and
        query name is WBS_VAR.
while executing this query name I'm getting the exception CX_SY_NO_HANDLER.
If i use WBS_VAR instead of ZWBS_VAR in when condition.. it is not showing that error.
this is my code i have written in ZXRSRU01 include.
DATA:it_wbs_elemt TYPE STANDARD TABLE OF /bic/awbsdsogn00,
     wa_wbs_elemt like line of it_wbs_elemt,
     L_S_RANGE TYPE RSR_T_RANGESID with header line,
     LOC_VAR_RANGE like line of i_T_VAR_RANGE,
     ZLOW TYPE C,
     LV_USER LIKE SY-UNAME,
     lv_user1 LIKE /bic/awbsdsogn00-/BIC/WBSE.
CASE i_vnam.
*****************************Start of Code for 'ZWBS_VAR' variable******************************
when 'ZWBS_VAR'.
lv_user = sy-uname.
if lv_user CP '/BIC/WBSE'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = lv_user
IMPORTING
output = lv_user1.
CLEAR wa_wbs_elemt.
SELECT * FROM /bic/awbsdsogn00 INTO TABLE it_wbs_elemt WHERE /BIC/WBSE = lv_user1.
READ TABLE it_wbs_elemt INTO wa_wbs_elemt WITH KEY /BIC/WBSE = lv_user1.
IF sy-subrc = 0.
l_s_range-low = wa_wbs_elemt-/BIC/WBSE.
l_s_range-sign = ' I '.
l_s_range-opt = ' EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIF.
ENDCASE.
IF I_STEP = 3.
LOOP at i_t_var_range INTO loc_var_range WHERE vnam = 'ZWBS_VAR'.
CLEAR : l_s_range.
zlow = loc_var_range-low.
lv_user = sy-uname.
CALL FUNCTION 'CONVERSIOn_EXIT_ALPHA_OUTPUT'
EXPORTING
input = loc_var_range-low
IMPORTING
output = loc_var_range-low.
IF lv_user NE loc_var_range-low.
IF lv_user CP '/BIC/WBSE'.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_CLASS = 'RSBBS'
I_TYPE = 'E'
I_NUMBER = '000'
I_MSGV1 = 'You are not authorized for the WBS ELEMENT'
I_MSGV2 = loc_var_range-low
I_MSGV3 = 'Enetr your valid WBS ELEMENT'
I_MSGV4 = lv_user
EXCEPTIONS
OTHERS = 02.
RAISE Again.
ELSE.
l_s_range-low = loc_var_range-low.
l_s_range-sign = loc_var_range-sign.
l_s_range-opt = loc_var_range-opt.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIf.
ENDLOOP.
ENDIF.
If you find any errors in this piece of code please let me know..
Thanks&Regads,
Sirisha.

Hey think other way round .
Filtering the report with the partner(current user executing the report) will suffice your requirement .
Am I correct ?
If yes then follow this simple approach .
Create a variable(mandatory, not ready for input ) of type customer exit on partner infoobject and filter your report with this variable .
In this way the current user executing the report can see data only related to him .
Type the below code in cmod .
WHEN '(give your variable name).
     DATA :lv_bp        TYPE /bi0/oibpartner,
    CHECK i_step EQ '1'.
    lv_bp = sy-uname.
    IF lv_bp IS NOT INITIAL.
      lv_bp = ( sy-uname ) .
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = lv_bp
        IMPORTING
          output = lv_bp.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      l_s_range-low = lv_bp .
      APPEND l_s_range TO e_t_range.
      CLEAR : l_s_range,lv_bp.
    ENDIF.
If this approach is not flexible in ur case then let me know will change the code what u have written as I can see many errors in that .
Also I can figure it out that the whole code is ctrl c ctrl v of that sdn document but his requirement was quite different than yours .

Error while executing query

Hi all,
I am not able to execute a report in BEx Analyzer. It keeps asking for userid and password and after that it gives message saying Query not yet calculated. When tried to execute again using the refresh button it disconnects from BW server. (I am typing correct userid and password).
Tried to check for the query that was created. Even the query doesnt open in BEx Query Designer. It gives error message saying - System Error in Program CL_RSD_MULTIPROV and from FACTORY -02.
Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
(This query is built on Multiprovider). I went in the BW system and checked if the Multiprovider and its cubes were inactive. I found that there was no problem with Multiprovider and its cubes. All are in active and executable state.
not sure what the problem is. Do let me know how we can resolve this issue.
Thanks in advance.
Maddy

Hi,
Reason for such error could be that you had some info-object either characteristic or key-figure in your query which now is deleted and since you are trying to open that query it is checking that info-object in source (multi-provider/cube/dso/infoset whatever is applicable in your case) which is not available and hence giving this error.
You need to add that info-object in info-provider on which query is built, ones you add that do necessary modification in query and then remove unwanted info-object from multi-provider.
Regards,
Akshay

Erro while running query for a Scheduled work book

The following error found while running query for a schedule workbook:
ORA-12801: Error signaled in parallel query server P000
ORA-01652: uable to extend temp segment by 14720 in tablespace SYSTEM
ORA-27068: skgfdisp: buffer is not aligned properly
OSD-04005: SetFilePointer() failure, unable to read it from file
We are using discoverer 4.1.
Any help is highly appreciated.
null

Candi,
Have your DBA check for trace file and contact Oracle Support: RDBMS group to track these errors down...
Chris
null

Error while executing query after migration

I have migrated a query to 7. While executing the report following error occurs
When I attempt to open a query, (I get past the login and query selection screens) I get the following error:
"Creation of item TEXTELEMENT_xx Failed" (20 or so lines)
After which the variable entry screen pops up, but no data is displayed when the query returns due to the creation of the elements failing.
Excel 2007 Office SP2. SAP GUI 710
Please suggest.
Regards,
Raj.

Hi Raj,
I also faced this problem with Excel 2007 BI
I was able to resolve the problem with the following
This problem is because changes to excel in the 2007
first try reinstalling the GUI components If it works with the reinstallation then its fine
if not try Installing FEP 900 (Latest patch for BEX Suite) and GUI 7.10 patch 13
this definitely solves your problem
Thank you

Error while accessing Query using Query Analyzer

dear experts...
while accesiing the query using query analayzer...
we are getting below error...
What has happened?
URL http://xxx.xxx.xxx.xx:XXXX/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex call was terminated because the corresponding service is not available.
Note
The termination occurred in system BI1 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:001-u:ANAND-l:E-i:PSRCCPRDA003_BI1_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
thanks for helping me...
anand

Hi friends,,
instead of getting the link like
http://128.222.125.57:9000/sap/bw/bex?cmd=ldoc&infocube=ZMC_SRH1&query=AGINGV21A&sap-language=EN(working link)
am getting below link...which is getting an error....
http://128.222.125.57:9000/sap/bw/://:/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=AGINGV21A
above marked is the unwanted thing so how can i change my link in query designer???
please suggest me firneds

Erro while executing query using BWA

Similar Messages

Maybe you are looking for