Erro while installing Oracle Database Vault in 10.2.0.3

Hi,
I am using Oracle 10.2.0.3 in Windows XP 32 bit. While trying to install Database vault I am getting the below error.
Java Virtual Machine Launcher
Could Not find the main class. Program will exits.

Please reread my question.
"I am getting the error" is roughly equivalent to saying "my car doesn't start tell me why?"
Well perhaps you have no petrol.
Perhaps you never turned the key.
Perhaps the battery is dead.
Perhaps the engine was stolen.
Again ... if you want help ... reread what I wrote and answer the questions asked. Otherwise I don't see how I, or anyone else, can help you.
What hardware platform? How much RAM? What CPU? What version of XP? What service pack, etc.? Details. Details. Details.

Similar Messages

Error while installing Oracle Database Lite 10.2.0.1.1 for Win

Hello,
I am trying to install Oracle Database Lite 10.2.0.1.1 on Windows XP. I am going according screens on this page:
http://www.oraclebrains.com/2008/07/installing-oracle-database-lite-10g-release-3-mobile-server/
But at Step:12 - Mobile Server repository Wizzard after password enter I get error --- Io exception: The Network Adapter could not establish the connection. May I insert specific password for Username SYSTEM? Or where is problem?
Thanks for hint
David

Hi,
I have the same problem but, how can i know what my SID is ? i am trying with "ORCL" and it doesnt work.
Do you know in which file i can get it ? in the documentation of the installation i found this:
"If you are not sure of the values to enter for the URL, then you can query the data dictionary to obtain these values.
Connect as SYSTEM and run the following queries.
To retrieve the SID, execute: select instance_name from v$instance;
If you need to retrieve the port number, check the listener.ora file on the
back-end database."
But how can i query the database if i have not finished to install it yet and where is located the listener.ora file ?
I hope you can help me.
Thank you.

Exports with Oracle Database Vault

Hi!
I've running a Database in version 10.2.0.4 and it has installed Oracle Database Vault, wich is running quite well...
I'm trying to export a schema that is protected with a REALM and only the owner of that schema has permision to access the data. So, users like sys o system can´t access to the data of the schema. It's the aim of Database Vault and it do it well.
The problem is that I'm performing a export of that schema and it run successfully! I have the .dmp file which I can import in other Databases (with Database Vault no installed) and it runs perfectly!
So... if Database Vault avoid that user sys can access the data, why it permit to perfom EXPORTS??
Thank,
tom

Bump. Thanks.

Problem in installing oracle database 11g express edition

while installing oracle database 11g express edition during product specific prerequisite check, checking for oracle XE service instance is failed, what to do ?

Hello, and welcome to the OTN forums,
the prerequisites are documented quite well. I'm not sure about the actual error message, but from what you write it sounds like you already have another Oracle XE install on your machine, possible the Oracle 10g XE. As mentioned in the Installation Guide, you may have only one instance per server, so the installer fails.
If that's not the reason, can you please post the exact error message you receive?
-Udo

Error while installing Oracle grid/Database vault in win XP service pack3

Hi,
I am trying to install oracle database grid 10.2.0.2 in win xp service pack 3. It's giving the below error.
"Could not find the main class. Program will exit"
When I am installing Database grid 10.1.0.3 it's getting installed.
I also have java 1.5 installed in my system.
I am getting the same error while installing Database vault.
Where ever it's asking for the below JRE_LOCATION in "oraparam.ini" file I am getting the error.
JRE_LOCATION=../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles

JRE_LOCATION=../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFilesPost the complete path,where the patchset is located. Make sure there's no space in the directory path. The same applies to the ORACLE_HOME directory.
Werner

How to install Oracle Database Audit Vault

Hi all,
i have my database in oracle 10g in linux environment, i wont to install oracle database audit vault 10.2.3 in linux
can any 1 let me know how to install it or what or the steps required.
any usefull link would be helpfull
Thanks....

Hi,
Please check : How to install Oracle Database Audit Vault - Yahoo Video Search Results
Thank you

ORACLE ERROR WHILE INSTALLING SAP DATABASE INSTANT

HI
this is rahul
Iam facing some problem while installing SAP DATABASE INSTANCE with error code ORA-01092 instance terminated with forced at the stage of database building
please help me
urgently
urgently

Hi Rahul,
It will be useful if you can send the error message which can be found in the oracle alert log.That information will be helpful to findout the solution.
Oracle alert file can be found in oracle/<SID>/saptrace/background
with name alert<SID>.log

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2

Error while installing Oracle Apps server 10.1.3 with Oracle DB 11.2.0.2 residing in the same server and being used by Apps server as it's metadata.
bash-3.00$ export ORACLE_HOME=/data/ora11g/app/ora11g/product/11.2.0
bash-3.00$ cd /data/OAS/install/soa_schemas/irca/
bash-3.00$ ./irca.sh
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
ERROR: Cannot find library - /data/ora11g/app/ora11g/product/11.2.0/jdbc/lib/ojdbc14.jar
Please verify that the ORACLE_HOME is set correctly.
bash-3.00$

Hi Craig,
Database 11gR2 could be used for Installing Application Server 10.1.3.x but with some limitation.
So please review the note:-887365.1 Oracle Database 11g Release 2 (11.2) Certification for Oracle Application Server 10g (10.1.2, 10.1.3, 10.1.4)
Section :- Oracle Application Server 10g Release 3 (10.1.3)
Regards,
Praaksh.

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Error while installing oracle R2 on linux

hi guy's,
first of all plz forgive me if i am placing this at wrong place.
actually i am trying to install oracle database 10g R2 on RHEL5 x86 platform.i complated all prerequisite for installing oracle on linux specified at
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php#Installation
but i am getting following errors while installation.
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-12-12_08-39-28PM. Please wait ...[oracle@SW044 /]$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using 'sw044:0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Source)
at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.<init>(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2091)
what this error represents ?? what steps should i follow?
plz help
thanks and regards
VD

actually sir i am doing this as oracle user.
and i have set DISPLAY=<machine-name>:0.0; export DISPLAY environment corrctly,and i ma using X emulation.
now what is the problem?
thanks and regards
VD

Error while installing oracle 10g on centos 5.6 32 Bit

Hi All,
Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
[root@staging ~]# find / -name libXp.so.6
/usr/lib/libXp.so.6
/usr/lib64/libXp.so.6
echo $DISPLAY
<ipaddress>:0.0
[oracle@staging database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
[oracle@staging database]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
Below is the error message I am getting :
oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[oracle@staging database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
I found some suggestion on google and tried to not use ip address in DISPLAY settings...
if I am using 0.0 instead of IP below eg.
[oracle@staging database]$ DISPLAY=:0.0; export DISPLAY
The error I am receiving differnt error
[oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@staging database]$ echo $SHELL
/bin/bash
Please help me.

satish.ygl wrote:
Hi,
I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
#xhost + and checked $PATH this is also is correct
I did these steps still i am getting the following error
pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
Please help me in this scenario.
thank You,
Sri
Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
ssh -X oracle@DB_Server
& the first & only command after logging onto the DB Server should be as below
xclock
If/when xclock fails, then OUI will fail.

Error while installing oracle 10g on AIX

I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl help

Hi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Error While Installing Oracle 9.2.0.1.0 on Win 2003 Server

Hi,
I am getting following error while installing Oracle 9.2.0.1.0 on Windos Server 2003-
ORA-12546: TNS: Permission Denied.
Above error pops-up during database configuration phase. Oracle docs says- "Acquire necessary privileges and try again." But I am installing as administrator.
Thanks in advance,
-Sandeep

I can't tell you why this error is occurring but you are installing a desupported version of the Oracle database that may well not be supported on your version of the o/s.
Check the support matrix and metalink and see if you can install a supported product such as 10.2.

Error while installing oracle 11g in centos 5.3

I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...

Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this.....

Error while installing Oracle Apps R12 , on windows server 2003 R2

Hi Experts
While installing Oracle Apps R12 , on windows server 2003 R2, I am getting the following error.
System Utilities
command: cmd.exe /c E:\oracle 12i dump\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
'E:\oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
======================================================================================================================================================================================================================================================================
File Space Check :
-- database node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 0.0
-- apps node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP = E:\apps\VIS\apps\apps_st\appl
required = 5800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = E:\apps\VIS\apps\apps_st\appl
required = 2800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = E:\apps\VIS\apps\apps_st\appl
required = 8400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = E:\apps\VIS\apps\apps_st\appl
required = 3100.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = E:\apps\VIS\apps\apps_st\comn
required = 3200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = E:\apps\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 0.0
waiting for expert suggestion.
Thanks
Rahul Srivastava

Hi Hussein
after changing the directory name as Stage12, I am getting error
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 200473.43359375
Disk space on system acceptable:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 194873.43359375
Disk space on system acceptable:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 174673.43359375
Disk space on system acceptable:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 173723.43359375
Disk space on system acceptable:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 70373.43359375
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = F:\oracle\VIS\apps\apps_st\appl
required = 5800.0
actual = 5873.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = F:\oracle\VIS\apps\apps_st\appl
required = 2800.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = F:\oracle\VIS\apps\apps_st\appl
required = 8400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = F:\oracle\VIS\apps\apps_st\appl
required = 3100.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = F:\oracle\VIS\apps\apps_st\comn
required = 3200.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = F:\oracle\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 73.43359375
also for
System Utilities
command: cmd.exe /c E:\Stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
E:\Stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
which: no cl in (/usr/bin:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/system32)
RW-50011: Error: - System Utilities Availability test has returned an error: 1
Yes I do have sufficient space i.e . for E: 106 GB and F: 195 GB free space .
Thanks
Rahul Srivastava

Erro while installing Oracle Database Vault in 10.2.0.3

Similar Messages

Maybe you are looking for