Erro while running SLDCHECK Tcode

Hi,
We have just installed our SAP XI Server.
After configuring the SLD i was trying to check the configuration.
While running the tcode "SLDCHECK" it is giving me the following error.
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
But it is opening the link successfully.Is something wrong ?
Regards,
Viren.

Hi,
Thanks for your reply.
i have checked every thing still it is giving me the same error.
RFC connections are working fine,even program ids are difined correctly in visual administrator..
I think i m missing something...
Can any body guide me ???
Regards,
Viren.

Similar Messages

ABAP dump while running the tcode MIGO

Hi All,
I am getting the abap dump while running the tcode MIGO when I searched I got two relevant sap notes but our functional team said that its not applicable in our case.
Please find the details of ST22 analysis-:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          17.04.2009 13:18:45
Short text
     The current application triggered a termination with a short dump.
What happened?
     The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
    Short text of error message:
    No RFC destination is defined for SAP Global Trade Services
    Long text of error message:
    Technical information about the message:
    Message class....... "/SAPSLL/PLUGINR3"
    Number.............. 002
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLMBWL" or "LMBWLU21"
    "MB_POST_GOODS_MOVEMENT"
SAP Notes i have reffered 1098491, 1041122
Currently we are running on SAP_APPL     600     0007     SAPKH60007
Regards,
Prashant

Hi Rohit,
This particular note is valid for
Support
Packages Release Package
Name
PI 2004_1_46B SAPKIPZI38
PI 2004_1_46C SAPKIPZI48
PI 2004_1_470 SAPKIPZI58
PI 2004_1_500 SAPKIPZI68
Our system is running on PI_BASIS     2006_1_700     0005     SAPKIPYM05
Pls suggest.
Regards,
Prashant

ATG Search erro while running indexing

Hi, i have this erro while running indexing in Search Project
Error from content adapter atg.searchadmin.adapter.content.impl.RepositoryAdapter@1efd62f6
atg.searchadmin.core.IndexLoaderException: Error from content adapter atg.searchadmin.adapter.content.impl.RepositoryAdapter@1efd62f6
     at atg.searchadmin.core.IndexLoader.acquireContent(IndexLoader.java:1148)
     at atg.searchadmin.core.IndexLoader.executeSession(IndexLoader.java:1990)
     at atg.searchadmin.core.IndexLoader$IndexingThread.run(IndexLoader.java:2423)
/atg/commerce/search/ProductCatalogOutputConfig: CONTAINER:atg.repository.RepositoryException; SOURCE:java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 120 seconds BEA1-68BD9E0B7126EC55F873 at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1616) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1503) at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:205) at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:74) at weblogic.jdbc.wrapper.ResultSet.preInvocationHandler(ResultSet.java:99) at weblogic.jdbc.wrapper.ResultSet_oracle_jdbc_driver_ScrollableResultSet.getInt(Unknown Source) at atg.core.jdbc.ResultSetGetter$IntGetter.getObject(ResultSetGetter.java:131) at atg.adapter.gsa.GSAItemDescriptor.getPersistentItems(GSAItemDescriptor.java:4428) at atg.adapter.gsa.GSAItemDescriptor.getPersistentItems(GSAItemDescriptor.java:4147) at atg.adapter.gsa.GSAItemDescriptor.getItems(GSAItemDescriptor.java:3394) at atg.adapter.gsa.GSAItemDescriptor.getItems(GSAItemDescriptor.java:3099) at atg.adapter.gsa.GSAItemDescriptor.executeQuery(GSAItemDescriptor.java:7789) at atg.adapter.gsa.GSAView.executeUncachedQuery(GSAView.java:338) at atg.adapter.gsa.GSAView.executeUncachedQuery(GSAView.java:438) at atg.repository.RepositoryViewImpl.executeQuery(RepositoryViewImpl.java:346) at atg.adapter.gsa.GSAView.executeQuery(GSAView.java:285) at atg.repository.RepositoryViewImpl.executeQuery(RepositoryViewImpl.java:323) at atg.repository.RepositoryViewImpl.executeQuery(RepositoryViewImpl.java:229) at atg.repository.search.indexing.IncrementalItemQueue.getRepoItemsForConfigAndGenerationRange(IncrementalItemQueue.java:867) at atg.repository.search.indexing.IncrementalItemQueue.getRepoItemsForConfigAndGeneration(IncrementalItemQueue.java:847) at atg.repository.search.indexing.IncrementalItemQueue$4.doInTransaction(IncrementalItemQueue.java:988) at atg.repository.search.indexing.TransactionUtil$IndexingTransactionAction.doWithTransaction(TransactionUtil.java:84) at atg.repository.search.indexing.IncrementalItemQueue.deleteChangesForConfigAndGenerationRange(IncrementalItemQueue.java:984) at atg.repository.search.indexing.IncrementalItemQueue$8.doInTransaction(IncrementalItemQueue.java:1590) at atg.repository.search.indexing.TransactionUtil$IndexingTransactionAction.doWithTransaction(TransactionUtil.java:84) at atg.repository.search.indexing.ConfigStatePersister$IndexingReadLockedTransactionAction.doWithTransaction(ConfigStatePersister.java:2101) at atg.repository.search.indexing.IncrementalItemQueue.removeObsoleteIncrementalState(IncrementalItemQueue.java:1587) at atg.repository.search.indexing.IncrementalItemQueue.removeObsoleteIncrementalStates(IncrementalItemQueue.java:1570) at atg.repository.search.indexing.IncrementalItemQueue.adjustIncrementalQueue(IncrementalItemQueue.java:1539) at atg.repository.search.indexing.LoaderImpl.adjustIncrementalQueue(LoaderImpl.java:2059) at atg.repository.search.indexing.BulkLoaderImpl.bulkLoad(BulkLoaderImpl.java:708) at atg.repository.search.indexing.IndexingOutputConfig.bulkLoad(IndexingOutputConfig.java:1475) at atg.repository.search.indexing.IndexingOutputConfig.bulkLoad(IndexingOutputConfig.java:1448) at atg.searchadmin.adapter.content.impl.RepositorySource.run(RepositorySource.java:480) at java.lang.Thread.run(Thread.java:662) Caused by: weblogic.transaction.TimedOutException: Transaction timed out after 120 seconds BEA1-68BD9E0B7126EC55F873 at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1614) ... 34 more
     2012-02-07 18:40:16.349
atg.repository.search.indexing.IndexingException: /atg/commerce/search/ProductCatalogOutputConfig: CONTAINER:atg.repository.RepositoryException; SOURCE:java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 120 seconds
BEA1-68BD9E0B7126EC55F873
     at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1616)
     at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1503)
     at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:205)
I change the transection timeout to 600 seconds and not resolved.
someone knows how to solve?

Hi,
Have you increased max connection for App server(up to 100)?
Which App server and database are you using?
Regards,
Nishant

Erro while running query for a Scheduled work book

The following error found while running query for a schedule workbook:
ORA-12801: Error signaled in parallel query server P000
ORA-01652: uable to extend temp segment by 14720 in tablespace SYSTEM
ORA-27068: skgfdisp: buffer is not aligned properly
OSD-04005: SetFilePointer() failure, unable to read it from file
We are using discoverer 4.1.
Any help is highly appreciated.
null

Candi,
Have your DBA check for trace file and contact Oracle Support: RDBMS group to track these errors down...
Chris
null

Error while running SLDCHECK

Hi Friends
 I have done the job of SAP PI post configuration but even when i am running SLDCHECK transaction, the following error i am getting. Can any one help please..
01.11.2007 Exchange Infrastructure: Test LCR Connection 1
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_PI1
gateway host:
ps3707
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: ps3707
port number: 50100
user : SLDAPIUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_PI1
gateway host:
ps3707
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
Thanks
Sriram.

Hi Ram,
Few steps taken from below guid.
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
(1) Check status of SLD server and, if required, start the SLD server
From the SLD main page http:///sld using the user and password maintained in transaction SLDAPICUST.
(5) Check the user maintained in the SLDAPICUST parameters within transaction SU01
Within transaction SU01 check the validity of the user and password maintained in SLDAPICUST.
· Does this user exist?
· Is its password valid?
· Is this user unlocked?
· Check the validity period of this user.
· Check if the role SAP_XI_APPL_SERV_USER is assigned to this user.
Regards,
Sarvesh

Error while running the tcode....EASISI ----- IS-UTILITIES

hi,
I am trying to execute the tcode EASISI with a varient.....
All the proper values are given to....... Simulation From,Simulate To,Document Date,Posting Date,Installation,Invoicing simulation,Simulate invoic. for ind. doc., and Billing simulation.
When I run with these parameters assigned,the Simulation is getting terminated with the message
"Field Base Unit of Measure must be blank (Account 0000800500 MYUC)' and "Invoicing of invoicing unit (account 4) terminated'.
I checked the UOM in the account specified and it was blank there.
Can anyone guide me....what exactly the problem is and how to solve it...
Thanks a lot for your valuable time.....
SRI

Hi Sri,
I also got the same error .We have resolved it thru Changing the include ZXBI1U08 . The code select * into table idberchz_1 should be replaced with select * into CORRESPONDING FIELDS OF table idberchz_1.
Hope this will Help you.
Thanks & Regards,
Radharaman Haldar

Error while running the tcode....EASISI

hello Experts,
I am trying to execute the tcode EASISI with a varient.....
All the proper values are given to....... Simulation From,Simulate To,Document Date,Posting Date,Installation,Invoicing simulation,Simulate invoic. for ind. doc., and Billing simulation.
When I run with these parameters assigned,the Simulation is getting terminated with the message
"Field Base Unit of Measure must be blank (Account 0000800500 MYUC)' and "Invoicing of invoicing unit (account 4) terminated'.
I checked the UOM in the account specified and it was blank there.
Can anyone guide me....what exactly the problem is and how to solve it...
Thanks a lot for your valuable time.....
~~Guduri

Rob...
Long text for the first error----
 Message no. >0083
Diagnosis
 You cannot make an entry in field Base Unit of Measure (due to th
 status specification you made in the G/L account master record fo
 field).
System Response
 Error message
Procedure
 Delete the value you entered in field Base Unit of Measure.
Long text for the second error-----
Invoicing of invoicing unit (account 4) terminated
 Message no. EB007
Diagnosis
 Invoicing of the invoicing unit (grouping of documents to be invoiced in
 the system) for the specified account could not be performed correctly.
 The reasons can be found in the previous lines of the log.
 You can find a list of documents which form the corresponding invoicing
 unit at the end.
Procedure
 Look at the previous lines of the log and correct the errors specified
 there.
Please guide me....
~~Guduri

Back ground ( Call Transaction) while running locking Tcode

When iam running Call Transaction in background , suppose other user open ( it is giving popup like another user locked) transaction at that time i am getting created records sucessfully even it is not running Call trransaction can any body help me out.

HI,
when ever you are program is running that transaction for a specific order and other user tries to access this transaction and opens the same order it will give this error.
Thanks
Mahesh

Erro while running irca.bat

Hi I am trying to install SOA suite on my machine. However I am facing issues when i run irca.bat. Below are the steps i followed.
1. unziped jdev C:\Jdev
2. install oracle xe - accepted all defaults
3. unzip soa suite to staging dir [c:\deepdive\SOA\
4 cmd
     set oracle_home=c:\oracleexe\app\oracle\product\10.2.0\server
set java_home =c:\jdev\jdk
     cd c:\deepdive\soa\install\soa_schema\irca
     irca.bat
When i run this irca.bat i get the following error.
Integration Repository Creation Assistant (IRCA) 10.1.3.1.0
(c) Copyright 2006 Oracle Corporation. All rights reserved.
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/tip/install/tasks/IRCA

The error means that your classpath is not set properly. Set the classpath properly.
--Shiv

Error while running tcode wwy1 in r/3

Hello,
I am beginner for Internet Transaction Server (ITS).
while running tcode wwy1 in SAP R/3, ther is an ABAP runtime error as below.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure
"USER_COMMAND_0100" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
In the function "BAPI_EMPLOYEE_GETDATA" the STRUCTURE parameter "PERSONAL_DATA"
is typed in such a way
that actual parameters are not valid, unless they are compatible
according to the Unicode fragment view.
But when I run test for function "BAPI_EMPLOYEE_GETDATA", it display the result.
Can anyone have a clue ?
Thanks in regards.
Minaxi shah

Hello,
I get the answer. In program personal_data is associated with bapip0002 structure.
where as in function personal_data is associated with BAPIP0002B. and the structure of BAPIP0002 is differ to BAPIP0002B.
minaxi shah

Error while running Assessment of Costs(TCode: KSU5)

Hi Experts,
I am facing a very critical situation which needs your immediate attention.
While running an Assessment Cycle using TCode KSU5 i am facing an error which says :
"No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document."
I am unable to understand why this is happening as the FI document is getting posted properly and data has also flown into the Cost Center from where the assessment will be made.
Also while doing test run the results are "Processing done without errors" but while making actual posting the above error appears.
I have to cover this transaction in UAT and hence needs your immediate attention.
Thanks & Regards
Piyush Kothari

Hi,
First create a G/L a./c for posting CO entries in FI
SPRO>FA (NEW)>**** (NEW)LEDGERS>REAL TIME INTEGRATION WITH FI>ACCOUNT DETERMINATION FORREAL TIME INTEGRATION>DEFINE ACCOUNT DETERMINATION FOR REAL TIME INTEGRATION
SELECT
CHANGE ACCOUNT DETERMINATION
SELECT RULES
SELECT POSTING KEY
ENTER G/L A/C YOU CREATED EARLIER FOR COFI ENTRIES
Bye,
Ramesh

While running tcode vn01, getting message you are not authorized

Hi friends,
one of the end while running tcode vn01 is getting message you are not authorized to use this function, earlier it was working fine and still it is working fine in quality, so please suggest what might be the problem,
Regards,
Tarun

Dear Friends,
Thanks a lot for your help, my problem has been resolved.
let me once again explain you what was the problem and how it got resolved.
Problem: when user was running tcode vn01, he use to enter the very first screen of vn01 but with pop up that u are not authorized to use this function.
although he was having the authorization for this tcode.
Solution: i gave sap_all to the user and after giving sap_all his problem got resolved, so it become confirmed that its only authorization problem
then i removed sap_all, checked related object of vn01 i.e s_number and its calling snum, i gave the authorization for snum and rnro but still he was facing the same problem
Then i created new role with only vn01 and assigned to my user id it was working fine, so i assigned the same role to that user but again his problem didn't resolved, then i created the copy of user and started removing roles one by one, other and for the role having vn01 authorization, by doing this problem got resolved and the role which was blocking vn01 to run come into picture, so i thought some tcode might be blocking this but it was not the case the role itself was blocking that tcode because i created the copy of the same role which was blocking vn01 and assinged to user then it was working fine and problem got resolved.
so what it concluded that might me the profile of that role was not created properly or may be it got corrupted or might be bug in ecc6.0
Thanks to all friends who contributed for the same.
i am posting one more question, please help me out in that also
i

Invalid key predicate error while running http method get via tcode /IWFND/MAINT_SERVICE

Hi,
I am facing an error which says "Invalid Key predicate"while running http method get via tcode /IWFND/MAINT_SERVICE.
The same works fine for sdata .The SICF nodes are active.But when the url has odata it does not seem to work as expected .This is the url I am trying to execute.
/sap/opu/odata/sap/QMLSINSPECTIONLOT/MATERIALDETAIL(MaterialNumber='1706',FROMDATE='20120303',TODATE='20120708')?$format=xml
(does not work -error invalid predicate)
/sap/opu/sdata/sap/QMLSINSPECTIONLOT/MATERIALDETAIL(MaterialNumber='1706',FROMDATE='20120303',TODATE='20120708')?$format=xml(works fine)
Could you help me with this error?
Regards,
Ann

Ann,
FROMDATE is a date field? Then you need to specify while providing value.
Example: Check it here.
How to use OData Date filter query to filter data from OData NetWeaver Gateway Service?
Thanks
Krishna

Error while running a BDC for the Transaction F-02

Hi,
 I'm getting an error "Parking not possible during Batch Input" while running a BDC for the transaction F-02.
 When i click on the error message it displays the message [b]"In Customizing, you can control whether an error message is issued."
 How to solve this issue?.
 Waiting for ur replies.........
Regards
N.Senthil

Hi,
When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
 Refer below theard for sample bdc code for f-02.
https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
Regards

Error while running the APP-F110 & Dunning - F150

HI Guru's,
while running the APP,,,i got the message finally posting orders"1 generated,1completed",,,,,,,But i am not getting the spool request and printout
In the same way in dunning,,i did the entire procedure,but not getting the spool request...
kindly help me
Regards
Sap Guru

hi Sapguru,
ok, Congrats for posting the Orders...haa
Go to Tcode SE38 and enter the program as RFFOUS_C and execute it.
In that screen enter the Identification and program run date and enter all the required firelds and then again execute it....
So that u can print the Check with the check lot number that u have created
Please create the check lot number in FCHI.
If u want to see the spool then go to SP01 and see there...
Hpe this resolve our problem...
assign the points if usefulll
Ranjit
null

Erro while running SLDCHECK Tcode

Similar Messages

Maybe you are looking for