ERROR ( 0 :: 42) when trying to setup sound on MPEG-4 export

I got a project with an ac3 file and a YUV 10-bit uncompressed video file that are same lenght on my comp (2;37;04).
When I try to set up the option for sound for a QT MPEG-4 export ; AE crashes with error ( 0 :: 42 )
Any clues as to why? Anyone has has that same bug ?
Thnak you.

Any clues as to why?
Cyclic use of the same routines for encoding and decoding at the same time, when those routines are not properly made "safe" in terms of memory management. Or something up with the audio. The smart thing to do as a start would be to convert the AC3 file to a conventional WAV, then try that again.
Mylenium

Similar Messages

  • HT4527 Getting error code 12004 when trying to setup home share on a new laptop.  Can't find what it means.

    My daughter received a new macbook pro for Christmas and is trying to turn on home sharing in itunes and it is giving her an error code 12004 but we cannot find what that means.  Does anyone know where to find error codes and their definitions?

    First thing to do is get the CC off your system.  Then try the direct download option linked below...
    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • I get an error 11556 when trying to setup a new account at the itunes store when trying to setup my ipad.  Help!

    I get an error 11556 when trying to setup a new account at the itunes store when trying to setup my ipad.  Help!

    There's some info on your error message number in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. Why?

    I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?

    Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.

  • HT201303 An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

    An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

    urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard.  no idea why i messed that up!
    anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work.

  • Error: Invalid Password when trying to sign in on any wireless devise

    Error:  Invalid Password when trying to sign in on any wireless devise
    I even reinstalled my WRT110 to be sure of the Network Name and Password but I still get this error.  I have never been able to log in to the wireless network.  I can see it - Ienter my password and still "Invalid Password"

    I don't understand this: Connect directly to the router.  Is this the http://192.168.1.1?
    I  HAVE changed the network name, I HAVE changed the password.
    I still get invalid password!!!
    I am extremely frustrated by all this.  I need simple instructions.  I followed them when I set the friggin thing up, I reinstalled.  I know what my friggin password is - why why why?

  • File Error: Unknown File when trying to render a Motion Lower third

    I'm getting this: "File Error: Unknown File" when trying to render a Lower third made in the Motion tab. I'm using FCP 6.0.6 and haven't had any issues with this before. It seems to work fine if there is just text, but as soon as I apply any effect, like a drop shadow, I get that error message.
    Thanks,
    Joe

    What's the exact format of the video you're working with and the exact specification the sequence you're editing in?

  • I'm getting an error code (A12E1) when trying to install Creative Cloud for photographers. Agraphers

    I'm getting error code A12E1 when trying to install the Creative Cloud app for photographers. Can anyone help me get installed?

    Hi Redrock,
    Could you try the solutions described here:
    http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html
    Thanks,
    -Dave B

  • Issues when trying to setup alternate sync location of OneDrive for Business / SharePoint 2013 Libraries

    Hello,
    I have an issue that prevents me from choosing the alternate location of sync'ed OneDrive for Business folders. I'm trying to setup an alternate location for synchronization, using the guidelines found in the Office support web site.
    The option to replace the default sync location appears the first time a SharePoint 2013 Library or OneDrive for Business is setup for synchronization.
    Here would be a link to a snapshot (since my account has not been verified): /Forums/getfile/443247
    At this point, the Library or personal OneDrive folder syncs correctly and the files are stored in the alternate choosen location.
    However, on when trying to setup an additionnal Library for synchronization, the alternate sync location has not been saved and reverts to the default sync location. Furthermore, the option to replace the default sync location does no longer appear
    on the dialog box.
    Here would be a link to a snapshot (since my account has not been verified): /Forums/getfile/443249
    I have tried by first sync'ing a SharePoint 2013 Library (instead of the personal OneDrive for Business folder) with the same result. Meaning that the first SharePoint 2013 Library correctly sync's in the alternate location of my choosing. However,
    any subsequent attempts to sync either a SharePoint 2013 Library or the OneDrive for Business folder results in them being sync'ed to the original default location in a folder under the user's profile directory.
    I'm using Office Professional Plus 2013 (64bits). The version of Groove.exe is 15.0.4605.1000 (12th March 2014 - 13 383 360 bytes).
    Is there something I'm missing ?
    Thanks for any help on this issue.

    Hi SpringComp,
    You can change the root path for libraries you sync to your computer, though you can do this only if you’re not currently syncing any libraries. If you’re already syncing at least one library and you want to change the path, you must first
    stop syncing all libraries. Then, the first time you run the OneDrive for Business wizard to sync a library to your computer, you’ll see an option to change the location.
    More information, please refer to the link:
    http://office.microsoft.com/en-001/support/change-the-location-where-you-sync-sharepoint-libraries-on-your-computer-HA102893480.aspx
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • TS3258 I get error message -42408 when trying to download itunes update 11.0.2 and thus can not upgrade to latest version.  What should I do?

    I get error message -42408 when trying to download itunes update 11.0.2 and I therefore can not update to that latest version.  What can I do?

    Hey there davidgor2!
    I have found an article that should help you resolve this issue with updating your iTunes. The article can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    and the specific part of the article you will want to look at first is right here:
    "Error 42023" through "Error 42408"
    These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
    Install the latest iTunes from apple.com/itunes/download/
    Remove the SC Info folder.
    If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
    Thanks for using the Apple Support Communities!
    Regards,
    Braden

  • I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

    Did you already try these suggestions?
    Check USB connections
    Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    copied from Resolve specific iTunes update and restore errors

  • HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

    when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

    Repair your Apple software update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

  • How do I fix the 4900 error I get when trying to burn a cd in itunes?

    how do I fix the 4900 error I get when trying to burn a cd in itunes?

    We are having the same issue.
    Windows 7 x64
    Microsoft Office 2013 (Word)
    Adobe Reader XI (11.0.0)
    Whenever someone tries to embed a PDF file into a Word document, the following error occurs:
    The program used to create this object is AcroExch. That program is either not installed on your computer or it is not responding. To edit this object, install AcroExch or ensure that any dialog boxes in AcroExch are closed.
    I have looked at alot of articles online that say to 'Disable' Protected Mode.  This does not resolve the issue.  This option is not set by default in our environment.
    Do we have any confirmation or information from Adobe on this issue? 

  • I am getting error code 0x8002006E when trying to burn a DVD

    Hi, I am running the latest Lion update, on my MB Pro, and keep getting the error code 0x8002006E when trying to burn a DVD. Could this be a dirty lens issue in the drive. I see that many others have had the same problem, but relly cant seem to find anyone that has a solution that works.. Help

    marobinson58 wrote:
    keep getting the error code 0x8002006E when trying to burn a DVD.
    It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
    "The burn failed because of a medium write error."
    Could this be a dirty lens issue in the drive.
    I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

  • Error code = 0x40010015 when trying to open PDF in PS CS3

    Greetings:
    I'm having a problem opening a PDF file in Photoshop.
    This is the error message:
    Error Opening the Portable Document File
    (PDF) Document. Error Code =
    0x40010015
    Searching the Adobe Forums, Knowledge Base, and even Google has turned up no results. Any idea what the problem may be?
    My process has been taking a PDF file created from QuarkXpress (6.5) and opening it in Acrobat Pro (8.1.2) and doing a save as and replacing the current pdf. Then I open this new PDF file in Photoshop CS3 (10.0.1) and apply actions. No problems. Then I encountered this one file that won't open in Photoshop, but will open in Acrobat, Preview, Illustrator. I get the following error message.
    I'm using a G5 PowerPC Mac (4 x 2.5 GHz Processor) with 6.5 GB DDR2 SDRAM for memory. Mac OS X version 10.4.11 (haven't switched to Leopard yet) Adobe Creative Suite 3 Design Premium software package.
    Thanks,
    Randy Hinderks
    Art Director / Video Editor
    On-Purpos, Inc.

    I receive an error code = 0x40010015 when trying to open a PDF in Photoshop CS3 for windows.
    I do not have Illustrator to open and re-save as the forum discussion indicated.
    Is there another way to open a PDF with this error code?  I work with Quark, Photoshop and Publisher
    MartyMag22

Maybe you are looking for