Error #0: An asset failed to load [url] on connection interruption

Hello,
I have scoured the internet and find it shocking that no ones has brought this up. Sometimes, when you close your browser or migrate away from a flash swf that loading assets, this error is thrown. I track these errors in my swf application and currently it's impossible to tell weather that error is due to a missing file or whether or not it simply is someone nagivating away from the page. Can anyone from Adobe advise me on how best to handle this? Ideally I'd like to detect a connection interruption, and not throw the error in the first place. There isn't even anything in the Adobe documentation about Error #0.
Thanks!
Zen

I've been facing a similar problem. I've been trying to connect to this one website, which requires Adobe Flash Player. In the start, it says "Connecting to server..." and stays like that for a while. However, after about half a minute this message shows up: "Connection failed. Error #0"
I was wondering if you found a solution to the Error #0, since it's been long since you've posted this on here. Please help me, if possible.
Thanks,
AdobeParadise

Similar Messages

Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.

I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
     export ORACLE_SID=summitdb
     export ORACLE_HOME='/usr/lib/oracle/11.2/client'
     export ORACLE_BASE='/usr/lib/oracle/'
     export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
     export PATH="$:/usr/lib/oracle/11.2/client/bin"
     export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
     ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

Error date20.dll module failed to load

I just loaded my Palm Desktop software onto a new PC with Vista. When I try to load the Palm Desktop I get this error message: "Error date20.dll module failed to load". Each time this happens, when I try to close this error message box for the 3rd time the Palm desktop finally loads. How can I stop this from happening every time I try to open palm Desktop?
Post relates to: Palm TX

Not sure why I couldn't find this answer in my earlier searches...
But this thread solved it for me:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3aa1e324-da32-4ea0-865c-c69f610ef262/failed-to-load-execute-package-task-error?forum=sqlintegrationservices
Essentially I had to install SSIS on the build machine so that the 64-bit version for
ExecPackageTask.dll, was available. I did this from the original media CD selection Integration Services as a feature.
Hope this helps someone in the future.

After itunes update my ipod touch is not syncing correctly first I got error message..ipod failed to complete sync because connection was lost..now it wont sync new music

After recent itunes update my ipod touch 4 is not syncing properly...I got error message twice "ipod failed to sync properly because connection was lost, please try again"... it continued acting weird, now when i click on "sync now" it says preparing to sync, it goes through steps quickly says sync finished but it doesnt update.. can anyone help?

There's a good guide here on how to roll back to 10.7 https://discussions.apple.com/thread/4559563?tstart=0

Error: The Task has failed to load on Execute Package Task using TFS Build and MSBuild.exe on dedicated Build Machine.

I'm trying to automate my building and deployment of SSIS packages using TFS build definitionss in conjunction with MSBuild.exe on a separate build machine.
I have successfully built and deployed my projects but receive the following error:
Error: Failed to load task "etl_UWP_Stage_tstg_7_Large",type "". The contact information for this task is "Microsoft Corporation: Microsoft SQL Server .... "
This error happens at runtime as well as if I perform a "Validate..." on the SSIS Catalog on the server.
This only occurs when trying to execute a package that contains an Execute Package Task. Any other packages that are doing the actual work are working just fine.
In addition, when I do the MSBuild from my developer machine with the same deployment process everything works fine, even the Execute Package Task.
I can even open up the project on the build machine in VS2012, rebuild all, then deploy and everything works fine.
Some things I've considered/verified:
1) Visual Studio 2012 and Visual Studio Data Tools 2012 are both on the build machine and my local machine.
2) The .NET version being used by VS2012 is the same on the build machine and my local machine.
3) I find it suspicious that the "Type" referenced in the error above is blank...but not sure where to go with that.
4) Obvious difference is that during the TFS Build and Deploy on the build machine, everything is running under the TFS Service account, rather than my account...once again...not sure where to go with this, but it is a significant difference.
Has anyone had similar issues or have any thoughts on things to try?
Thanks,
Jason

Not sure why I couldn't find this answer in my earlier searches...
But this thread solved it for me:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3aa1e324-da32-4ea0-865c-c69f610ef262/failed-to-load-execute-package-task-error?forum=sqlintegrationservices
Essentially I had to install SSIS on the build machine so that the 64-bit version for
ExecPackageTask.dll, was available. I did this from the original media CD selection Integration Services as a feature.
Hope this helps someone in the future.

Error editing task sequence: Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" From XML into WMI

I've started getting an intermittent error editing my Windows 7 OSD task sequence. Sometimes I can open the TS to edit, but when I try to apply changes I get the error. Other times I get the error when trying to open the TS. If I try again
right away, I still get the error, but if I wait a few minutes and try again sometimes it will open the TS.
The error reads:
ConfigMgr Error Object:instance of SMS_Extended Status{Description = "Failed to load dynamic properties for class \"SMS_TaskSequence_ApplyWindowsSettingsAction\" from XML into WMI";Error Code = 2147943746;File = "e:\\qfe\\nts\\sms\\siteserver\\sdk_provider\\smsprov\\ssptspackage.cpp";Line = 3454;Operation = "ExecMethod";ParameterInfo = "SMS_TaskSequencePackage";ProviderName = "WinMgmt";StatusCode = 2147749889;}
Coinciding with this error, I show the following entries in the TaskSequenceProvider.log file:
[PID: 7608] Invoking method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Failed to protect memory buffer, hr=0x80070542
TaskSequenceProvider
Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load node Apply Windows Settings from XML into WMI 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "PostInstall" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "Execute Task Sequence" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load children steps for node "" from XML 0x80070542 (2147943746)
TaskSequenceProvider
Failed to load XML for the task sequence into WMI 0x80070542 (2147943746)
TaskSequenceProvider
[PID: 7608] Done with method SMS_TaskSequence.LoadFromXml
TaskSequenceProvider
Setting status complete: status code = 0x80070542; Failed to load dynamic properties for class "SMS_TaskSequence_ApplyWindowsSettingsAction" from XML into WMI
TaskSequenceProvider
I exported the task sequence and checked in "object.xml" for the "ApplyWindowsSettingsAction", to see if there was something odd in the xml, but I don't find anything that jumps out as being wrong. Here's the section of XML for
that step. I've removed identifying info, and replaced it with a generic term in bold.
<step type="SMS_TaskSequence_ApplyWindowsSettingsAction" name="Apply Windows Settings" description="" runIn="WinPE" successCodeList="0" runFromNet="false"><action>osdwinsettings.exe /config</action><defaultVarList><variable name="OSDLocalAdminPassword" property="AdminPassword"></variable><variable name="OSDComputerName" property="ComputerName">%_SMSTSMachineName%</variable><variable name="OSDProductKey" property="ProductKey"></variable><variable name="OSDRandomAdminPassword" property="RandomAdminPassword">false</variable><variable name="OSDRegisteredOrgName" property="RegisteredOrgName">COMPANY NAME</variable><variable name="OSDRegisteredUserName" property="RegisteredUserName">COMPANY NAME</variable><variable name="OSDServerLicenseConnectionLimit" property="ServerLicenseConnectionLimit">5</variable><variable name="OSDTimeZone" property="TimeZone">Central Standard Time</variable></defaultVarList></step><step type="SMS_TaskSequence_ApplyNetworkSettingsAction" name="Apply Network Settings" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>osdnetsettings.exe configure</action><defaultVarList><variable name="OSDDomainName" property="DomainName">DOMAIN.COM</variable><variable name="OSDJoinPassword" property="DomainPassword"></variable><variable name="OSDJoinAccount" property="DomainUsername">DOMAIN ACCOUNT</variable><variable name="OSDEnableTCPIPFiltering" property="EnableTCPIPFiltering" hidden="true">false</variable><variable name="OSDNetworkJoinType" property="NetworkJoinType">0</variable><variable name="OSDAdapterCount" property="NumAdapters" hidden="true">0</variable></defaultVarList></step>
Is there any other log I should check for a clue on this issue? What could be causing this error?

Thanks for sharing that! I tend to save contacting MS support until after I've exhausted other options. I'm always afraid that I'll spend the $500 to open a case and then it turns out to be something simple that I would have found if I had just
kept working on it myself a little longer.
It looks like that link is for an update released in February as KB3023562. I downloaded and installed it. I'll try opening/editing/saving the task sequence a few times today to see if the issue is resolved.
After I had already installed it, I thought to look up that update in configmgr. The update is listed as superseded by 2 other updates. The newest of those is KB3046049, which just installed last night with the other March patches, so it's possible
that I didn't need to install KB3023562 after all.

DIM Error when starting Informatica - Failed to load DLL: HASClient.dll

Hi all,
I have Informatica 8.1.1 SP3 installed and I have installed Hyperion DIM adapter for Essbase 11.1.1.
I have followed all the steps given in the installation guide to install the adapters.
But when I open Informatica I am getting the error - Failed to load DLL: HASClient.dll for plug in HASCONNECTOR.
Beacuse of that I am not getting the option to 'Import from Essbase' in Informatica.
Can anyone give any idea what I may have done wrong and how can I make it working.
Thanks..

You need to run through the instructions again. This sounds like an issue with the environment variables not being set correctly.
Look in the [DIM Install PDF|http://download.oracle.com/docs/cd/E17236_01/epm.1112/dim_11111_install.pdf]

Error when creating Report: "Failed to load ..../testReport.xdo"

Hi,
I am new to Publisher an have a problem:
I create a new report "TestReport" under "Shared Folders" (or somewhere else, the error does occur in every situation)
After that I clickt the "Edit" button, to define my report.
But at this point I get the message : "Failed to Load ..../TestReport.xdo"
Does anyone know, how to solve this problem?
Thanks
Michael

I found our a bit more, but still have the error.
First of all, I forgot to say that I run publisher under Windows 2003.
And I fount two files "xmlp-server-config.xml" with different content:
- D:\OracleBI\xmlp\XMLP\Admin\Configuration:
<xmlpConfig xmlns="http://xmlns.oracle.com/oxp/xmlp">
<property name="SAW_PASSWORD_ENC" value=xxxx/>
<property name="BI_SERVER_SECURITY_DRIVER" value="oracle.bi.jdbc.AnaJdbcDriver"/>
<property name="SAW_SESSION_TIMEOUT" value="90"/>
<property name="DEBUG_LEVEL" value="exception"/>
<property name="SAW_SERVER" value=xxxxx/>
<property name="SECURITY_MODEL" value="BI_SERVER"/>
<property name="ENABLE_SUPERUSER" value="false"/>
<property name="GUEST_FOLDER" value="false"/>
<property name="SAW_VERSION" value="v4"/>
<property name="SAW_PROTOCOL" value="http"/>
<property name="BI_SERVER_SECURITY_ADMIN_USERNAME" value="Administrator"/>
<property name="BI_SERVER_SECURITY_URL" value="jdbc:oraclebi://xxxx:9703/"/>
<property name="SAW_URL_SUFFIX" value="analytics/saw.dll"/>
<property name="BI_SERVER_SECURITY_ADMIN_PASSWORD_ENC" value=xxxx/>
<property name="SAW_PORT" value="9704"/>
<property name="SAW_USERNAME" value="Administrator"/>
</xmlpConfig>
- D:\OracleBI\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF:
<xmlpConfig xmlns="http://xmlns.oracle.com/oxp/xmlp">
<resource>
<file path="D:OracleBI/xmlp/XMLP"/>
</resource>
</xmlpConfig>
In the second file I think the "file path" looks very strange for a windows system, but BI Publisher creates it this way.
Anyone have an idea?
I think the problem comes from the path. I also tried to insert "D:\OracleBI\xmlp\XMLP" but it didn't work either...

I just tried to load the latest version of itunes, and got a windows error 1114, and error 7. It failed to load. Anyone have this problem?? How to solve??

Anybody have any ideas - couldn't load latest itunes version, windows error 11.

Hi Meskijian,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

There was an error during initialization. Failed to load an application resource (internal error).

I get this error 4 times when I open reader and can;t repair or uninstall it 11.0.06 (Mircrosoft windows search filter host needs to be closed).
Windows 7

I haven't installed any third-party plugins. However, looking at the list of plugins, I see that there are two copies of ECMAScript: EScript.api dated 12/18/12, and EScript_AVG_RESTORED.api dated 1/21/13. So my bet is this is a side-effect of my anti-virus blocking the JavaScript security hole that was fixed by Java 7 Update 11. I deleted escript*.* from C:\Program Files (x86)\Adobe and the errors have gone away.

Failing to load webpages when connected at work (works fine else were)

I have a PowerBook G4 that I moved between work and other locations. I have never had any issues before, but now I am getting a very strange issue in Safari (1.3.2). If I enter the domain name of the site (say www.apple.com) it fails to ever connect, but if I put in just an IP address it is fine. This caused me to think "Hurm...DNS lookups are failing for some reason". But this seems to not be the case. I can open up terminal type "telnet www.apple.com 80" and then "GET index.html" and it works just fine. So DNS looks ups are atleast working Terminal. Also, this only occurs when I am at work. We have no other machines on the network that experience this problem. All other machines there are just fine.
Any ideas?
PowerBook G4 Mac OS X (10.3.9)

I will say that Linksys Routers are notorious for being subpar. My suggestions would be to disconnect the router and cable modem and turn off the computer (and everything).
Then, wait fifteen minutes.
Then, turn on the cable modem. Let it go through all its blinky phases, then turn on the router. Wait at least three minutes for ole' cranky to wake up. Now turn on your Mac.
This is what you have to do when a router forms a bad DHCP client lease.
An alternate first step would be to manually enter your own IP address that's the same everything except make up a 200 range number and throw it in for Z on the equation before .*..Z.
E.G.: if your DHCP address is 192.168.3.43, make up your own ending and manually enter it. 192.168.43.200. Set the router as x.x.x.1 (e.g. 192.168.43.1) and SubNet as 255.255.255.0

Failed to load resource: Frame load interrupted error on ICS file link

When clicking a link to an ICS iCal file on a webpage the error console shows a "Failed to load resource: Frame load interrupted" error. Can someone independently confirm this?
The file is downloaded, however, but it does not automatically open in iCal like it should. The console error is fairly new, perhaps in the latest update? We've been trying to get Safari to automatically attempt to open ICS files in Calendar for several months, with various headers and such, without seeing that error. Now we've got two problems.
I read a post somewhere that this error is related to downloading files with "fake" URLs. We have been trying to deliver an ICS file straight from a PHP script, but I have also tested a link directly to an actual ICS file and get the same error.
Fritz

You can't download any file from any web page?

Failed to load Execute Package Task error.

Hello Experts,
Excuse my newbie question.
Execute Package Task: Error: The task has failed to load. The contact information for the task is "Microsoft Corporation; Microsoft SQL Server; Microsoft corporation; All Rights Reserved http://www.microsoft.com/sql/support/default.asp:1"
We have a windows service running on our app server that deploys a package that executes other packages using execute package task. This package and rest of the packages are in the same folder at the same level under integration services
catalog. The package fails to execute with the above said error.
Execute package task is configured to run in 'in-process' mode. Changing delay validation to true/false in child packages didn't help.
ironically if the package is deployed using a console application from the app server the package gets executed just fine. I checked permissions, everything seem fine.
Is there anyway to get details of this error to understand the problem better? I am looking at reports > standard reports > all executions.
Thanks.

As it turns out, the 63bit ExecPackageTask.dll was not found under "C:\Program Files\Microsoft SQL Server\110\DTS\Binn". Installing "SQL Server Data Tools" installed only 32 bit version of the component under "C:\Program Files (x86)\Microsoft SQL
Server\110\DTS\Binn".
Is there a way to get 64bit version of this component without installing "Integration Services" (to avoid possible license issues)?
Hi Jayakarthiks,
To make use of the 64-bit ExecPackageTask.dll, you also need the 64-bit SSIS runtime and 64-bit DTExec utility tool. To obtain the 64-bit SSIS runtime and tools, you have to install the SQL Server Integration Services service from your SQL Server 2012 install
media.
Reference:
http://msdn.microsoft.com/en-us/library/ms143731.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION

With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
Plug-ins that failed to load:
   DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION - - from the file “DigitalAIRProv2.plugin”Flash:
   Connections
   Kuler
This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
Reinstalling the plug-in did not make any difference. What can cause this error?

Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to.

MacBook Pro won't boot up. read error 0x7 failes to load a number of drivers?

Dear All,
Lately I am having quite a bit of trouble with my Late 2011 MacBook Pro. It seems to be stuck in a vicious circle of boot-ups.
Since a couple of days it is taking ages (like 5 min) to boot up, and today it just doesn't get to te "user-screen" anymore.
I have tried to boot it in safe-mode and tried to enter the repair utility, but those don't seem to work.
When I tried booting it in single-user mode, it told me it had "read error 0x7" and it fails to load a whole number of drives.
When I run a Fysical System Check, it tells me the Macintosh HD can not verified?
What can I possibly do to get back in there again? are all my documents lost?

This may work if the drive is OK. If it's accessible but corrupted try the second procedure.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
And, it neither work consider my original suggestion.

Error #0: An asset failed to load [url] on connection interruption

Similar Messages

Maybe you are looking for