Error "0"... Quicktime not installed properly?

I installed and re-installed the new Quicktime version 3 times now... and I am still getting this message when trying to view a Quicktime videos on Firefox.... and then get a message that I have to close Firefox, or, it sounds like something dreadful will happen...
Even worse, I can't open pics without it defaulting to Quicktime pictures and get another error message and the insistence that I close Firefox!
I had no problems before installing this update. I have read the thread about Error "0"... it is all questions and NO answers! What is the deal? How do I reach someone to help me with this?
I dislike using IE, but when I went to it, I was able to view Quicktime videos after installing a plugin... I think...????... and then I had to download DivX. I will uninstall it once again just so that I can view other formats of videos and pics on Windows Media player.
Please tell me what is wrong here or what plug-ins I need to make Quicktime work.
sawblog

Hi,
Was the system copied from another system? Or is this a new installation?
If yes, did you run SE06 after the installation?
What is the results of trans.log (generated from R3trans -d)?
Also paste the contents of table TADIR in SE16.
Best regards,
Warren

Similar Messages

  • ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)

    Hi Experts I´m facing this issue.
    This is tp version 340.16.41 (release 640)                         
    HALT 20091029110915                                                
    ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)
    ERROR: EXIT(16) -> process ID is: 9660                             
    tp returncode summary:                                             
    TOOLS: Highest return code of single steps was: 16                 
    ERRORS: Highest tp internal error was: 0233                        
    standard output from tp and from tools called by tp: 
    Any Clue?

    Hi,
    Was the system copied from another system? Or is this a new installation?
    If yes, did you run SE06 after the installation?
    What is the results of trans.log (generated from R3trans -d)?
    Also paste the contents of table TADIR in SE16.
    Best regards,
    Warren

  • Error 7 itunes not installing properly

    I have done the uninstalling and re installing process over and over and I still cannot get itunes to download properly.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • "QuickTime not installed" error

    Apple support said the forums or Microsoft support is the best bet to figure out my issue.
    I receive an error when attempting to run iTunes 7.3 after installing. The error is "QuickTime not installed, please reinstall iTunes".
    I have done the following:
    - reinstalled iTunes several times (including using the exact steps from here: http://docs.info.apple.com/article.html?artnum=93698)
    - run the Windows installer cleanup (from here: http://support.microsoft.com/kb/290301)
    - verified my computer is running 32-bit and not 64-bit windows (here: http://support.microsoft.com/kb/827218). I am running Windows XP Pro 2002 SP 2.
    - used registry cleaners CCleaner and RegCure
    - Attempted to install QuickTime standalone version, which gives me the vague message "The installer encountered errors before the requested operations for QuickTime could be completed". This is where Apple support says the problem is with XP, which I do not doubt, but is still difficult to troubleshoot.
    - deleted iTunes/QuickTime/Apple registry entries in
    HKEYLOCALMACHINE/SOFTWARE
    HKEYCURRENTUSER/Software
    HKEYCLASSESROOT/Applications
    HKEYCLASSESROOT
    - successfully installed QuickTime 6.5.2. Reinstalled iTunes. When running iTunes with this old version of QuickTime, I receive a message saying to reinstall iTunes. After reinstalling iTunes, I receive the same message.
    I seem to be stuck in some infinite loops, and stumped Apple. This could very well be a Microsoft problem, and I have my iPhone working with my home laptop, but I don't think the Apple support suggestion of contacting Microsoft will work. I work in tech consulting, so I know that a vague error message to the effect of "encountered errors, try again later" will not be very helpful (to either Apple or Microsoft really - though the apple software is the one that isn't giving me any helpful message, as opposed to a windows error message).
    Any help is much appreciated.
    -Holt
    compaq nc6400   Windows XP Pro  

    I may have made some progress on this issue.
    I have installed an old version of QuickTime (6.5.2) that works successfully. However, when I try to use the Windows Installer Cleanup Utility to uninstall it, QuickTime does not appear in the list.
    Any other software I have successfully installed appears on this list (in addition to the Add/Remove Programs list), including the version of iTunes that does not work. So for whatever reason, QuickTime is not registered as installed on my computer, which I beleive is causing the problems.

  • Tried to upgrade and after uninstalling and reinstalling several times, keep getting "procedure entry point could not be located in dynamic link library" followed by "iTunes was not installed properly"  Error 7.....Help, please??

    Tried to upgrade as instructed and after uninstalling and reinstalling (even back to the former iTunes which I was happy with)several times, keep getting message "Procedure entry point could not be located in dynamic link library"  followed by "iTunes was not installed properly"  "Error 7".    Help, please??

    Entry point errors can usually be fixed by deleting the offending dll, then repairing the component it is part of from the programs and features control panel. Unfortunately you neglected to include the detail of which dll is mentioned.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • Why is my itunes not installing properly? I installed it and it was fine, then it started to show Errors. iTunes exe - Entry Point not Found. And the Error 7 (Windows error 127).Itsays to reinstall iTunes. I did that and same error. new pc, same on old

    Why is my itunes not installing properly?
    I installed itunes day before yesterday,  I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
    I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
    on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
    iTunes exe - Entry Point Not Found
    The procedure entry point
    AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
    be located in dynamiclink library F:\Programmes\iTunes.dll
                                                                                               OK
    then after pressing 'OK' the following message:
    iTunes
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
    The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
    Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
    Regards,
    Damian36

    I started up and plugged in my iPad  and then the following message came up:
           iTunes
    ❗️This iPad cannot be used because the required software is not
        Installed. Run the iTunes installer to remove iTunes, then install
        the 64-bit version of iTunes.
                                                                                             OK
    I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
    Started the install and then received this message:
          Apple Mobile Device Support
    ❗️Service 'AppleMobile Device' (Apple Mobile Device)
        failed to start. Verify that you have sufficient
        Privileges to start system services.
       Abort.               Retry.                Ignore
    I tried all tree options, last being ignore.
    I continued to download the other 2 you suggested with out any drama.
    I did a system restart and then opened iTunes.
    Connected my iPad
    Then message appears:
          iTunes .exe - System Error
    ❌ The program can't start because CoreAdioToolbox.dll is missing from
          Your computer. Try reinstalling the program to fix the problem.
                                                                                           OK
    Press OK and then the next message:
           iTunes
    ❌ iTunes was not installed correctly. Please reinstall iTunes.
          Error 7 (Windows error 126)
                                                                                           OK
    Any suggestions?

  • I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

    i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • The latest version of iTunes did not install properly on my Windows 7 PC.  I am getting the following error message: "Service 'Apple Mobile Device' failed to start.  Verify that you have sufficient privileges to start system services." Can anyone help?

    The latest version of iTunes did not install properly on my Windows 7-64bit PC.  I am getting the following error message: "Service 'Apple Mobile Device' failed to start.  Verify that you have sufficient privileges to start system services."
    I have tried the following troubleshooting steps without success:
    Restart PC
    Uninstall iTunes and attempt to reinstall
    Verify that I am signed in as an administrator
    Download and save iTunes64Setup file, right-click, and run as Administrator
    Disable Norton antivirus software
    Any suggestions would be greatly appreciated!

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • I have tried to update my itunes program. It was running great until I attempted the update now all I get is an error message that says "Itunes was not installed properly, Please reinstall itunes, Error 7 (Windows erroe 126)". What can I do to get my it

    I tried updating my itune program. Now all I get is the following message "Itunes was not installed properly. Please reinstall itunes. Error 7 (Windows error 126). WHAT can I do to get back to where my itunes program is running again?
    I have uninstalled the proram and tried reinstalling and get the same error message. The other error message I get is "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem".  I have tried that twice with no luck. Can someone help me get my music back???

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • HT1923 got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127),

    got notification that new Itunes version is available, once i installed it I'm no longer able to open Itunes, I get the error message, Not installed properly. Reinstall itunes. Error 7(Windows error127), I tried repairing itunes, Apple Aplication support, apple mobile device support, bonjour and I even uninstalled and reinstalled Itunes and still problem exist, any solution?
    I have windows 8

    I got this message today too. I understand that my music is stored on my computer, however I want to be certain that if I re-install iTunes, it won't erase my library....playlists, playcounts, checked songs, etc.

  • Quicktime not installed error message upon installation of Itunes

    HI,
    I have Quicktime already installed (7.7 1680.34) and I have Itunes (10.4.0.80).  Now when I seek to update to the latest Itunes I receive an error message saying 'Quicktime not installed' and then it stops the installation.  Same thing happens after reinstallation of Quicktime.  -What to do now?
    //J Sundberg

    Try removing QuickTime from Control Panel before installing iTunes 10.4.1.
    Check out this Apple document, if you need a walkthrough of uninstalling from Control Panel -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Make sure you read the detailed steps, if you run in to a problem.

  • I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly.  I have uninstalled/reinstalled evernote but it still doesn't work.  Anyone know where evernote stores their files on a Mac/

    I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it.  I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work.  Anyone know where evernote stores their files on a Mac?  Or had this problem.

    Are there any dialog boxes popping up behind your Yahoo screen?
    I have intermittent problems attaching files in Yahoo mail and this is usually the reason.  I'm also using an iMac (10.7.3) and this is likely the problem.
    It is generally a Yahoo issue rather than a Mac problem.

  • HT5654 I tried to install the new update to iTunes on my Windows XP computer and I keep getting an error that say iTunes was not installed properly. Please reinstall iTunes.  I tried that and it still won't work.  Got any ideas what is wrong?

    I tried to run the new update to iTunes and I got the error....iTunes was not installed properly.  Please reinstall iTunes.  I have tried that twice with no success.  Anyone have any ideas what the problem is?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I have downloaded itunes numerous times with no success. When I click the icon it says that "itunes has stopped working" and then says that "itunes was not installed properly. It provides an error message code, but it overlayed by another message.

    I downloaded itunes. It initially indicated that the download was successful, however, when I click the itunes icon, it says "ituns was not installed properly". It then gives me the message "itunes has stopped working"

    Not completely sure. But if you think it is an iTunes issue...... follow through this: Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    ALSO, if you feel like all your music will be gone as well follow through these 2:
    > Downloading past purchases from App Store, iBookstore, and iTunes Store
    > How to use your iPod to move your music to a new computer
    IF YOU THINK ITS A COMPUTER ISSUE, RESTART YOUR COMPUTER BEFORE DOING ALL THIS.

Maybe you are looking for

  • Problem with payment wizard

    Hi Experts, a customer of ours encountered a strange problem while using the payment wizard. Testrun was successfull, the real run threw an error with the following message: If you restart SAP and start the run again, it works perfectly fine. Anyone

  • Is the iPhone release simple by design??

    Is iPhone Intentionally simple to start with? I was thinking about this a lot lately. There are so many things, simple things, obvious things, missing from iPhone on its release that I cant help thinking its more of a strategy then lack of foresight

  • Bringing vector graphics from illustrator photoshop final cut express.

    I'm having a heck of a time getting my logo from illustrator to photoshop to final cut express. It is squishing it. It looks jagged in photoshop. I am cutting and pasting from an eps file to a photoshop doc that is for film and video. I'm not sure wh

  • MacBook Pro - Widget problem - Help!

    When I set up my new MacBook pro I used the "Migration Assistant" to transfer the information from my PowerBook to my new MacBook. In doing so it appears to have grabbed the default Widgets from my PowerBook and replaced the ones that came preinstall

  • Reg: Calling an ecatt script in R/3 function module

    Dear Freinds Can Anyone of you tell me if an ecatt script can be called inside an r/3 function module. if yes, please explaion me how it can be done. If you have any example code it will be quite useful for me. Points will be rewarded for suitable an