Error 0 x BFF6001F Cannot detect recognizable video source

Hi
Facing this error message
error 0 x BFF6001F Cannot detect recognizable video source
Labview 7.1 with a NI-IMAQ Vision 7.1.1
Imaq card NI-PCI-1407
I am not able to detect a CCD camera on this card.This is what , I have done so far :
Tried 3 different cameras ( all irs 170 out put) on a computer with the same image acquisition card ( PCI 1407) ---- all cameras work well
Now when I go to a different computer with the same software and same card , I am facing the error
error 0 x BFF6001F Cannot detect recognizable video source
Card itself is able to pass the self-test.
I have compared all the parameters in the tabs under Channel0:rs170 and they are same in two different computers.
Can you suggest something..?
Thanks
Deepak
LAB View 2010 SP1

Hi Deepak,
There are a lot of things that could be causing that error. The first thing that you could check is the power that the camera gets at the computer where it does not work. If the camera is not getting enough power or is getting "dirty" power, it could cause that error. Are the computers in two different locations? Can you verify that everything works in one computer and not in the other when the power source is the same, i.e. same outlet, same power adapter and cabling?
Once we have removed power from the equation, you should check the video signal itself. If you have a scope or a DAQ card, you can probe the line and see what the signal looks like. This article discusses analog signals, and you should see something similar to the signal in the second figure.
Let me know what you find.
Regards,
Brandon M.
Applications Engineer
National Instruments

Similar Messages

Cannot Detect Video card (Radeon 6750m)

Dear sir,
I would like to know why my laptop cannot detect my video card (Radeon 6750m). It only shows the built in graphic card intel. I already try to use system restore and reset to original factory mode. It will appear but after updating my drivers and reboot my laptop. My laptop cannot detect again the video card.
Please help me resolve this problem,
for you reference
http://tinypic.com/r/2it67ex/8
This question was solved.
View Solution.

You will have to enable the Radeon HD adapter by using the Catalyst Control Center.
Once you do that the adapter will appear in the Device manager.
If you are using the Intel HD graphics, only the Intel graphics will be seen in the Device Manager.
I know that may sound strange, but it is one of the pecularities of having a switchable graphics capable notebook.
The following URL goes to an overview of switchable graphics. Take a few minutes and read it. It should help make understanding it simpler.
http://support.hp.com/us-en/product/HP-Pavilion-dv4-Entertainment-Notebook-PC-series/5048648/model/5...
Do not instal the Intel graphics driver seperately!
Doing that breaks the switchable graphics feature.
Only install the HP ADM ATI graphics softpaq. It will install both drivers automatically and let you use the switchable graphics featrure og your notebook.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

C00d4e84 error and cannot play self recorded video...

hi all
I have nokia lumia 620 and when I want to play music (on sd card mp3 from PC) i see c00d4e84 error
and
I cannot play self recorded videos in 720 on phone I see this device can not play this
thanks for your help

hi all
I have nokia lumia 620 and when I want to play music (on sd card mp3 from PC) i see c00d4e84 error
and
I cannot play self recorded videos in 720 on phone I see this device can not play this
thanks for your help

Error 1074397153 Cannot Detect Recognizable Video source

I'm using a single PCI1410 card to acquire images from two cameras and display those images in Labview using the Multiple Camera Acquisition.vi found on the NI website. I'm running Windows XP, and my two cameras are Sony XC-HR70's with a resolution of 1024X768 each, running ~15FPS (total for both) thru the frame grabber. I have one camera as a master, supplying the HD & VD synch signals for both my slave camera and the PCI1410. Here is my problem:
      Whenever I change the light intensity for the cameras drastically (ie, abruptly shutting off the light source or blocking the camera), I get an error in Labview: "1074397153 @ IMAQ Extract Buffer.vi.   NI-IMAQ: Cannot detect recognizable video source". If I perform a gradual decrease in light intensity, I don't get the error. Unfortunately, the users often need to toggle on and off my camera illuminators abruptly, so a gradual transition is not an option.
       I thought this was a MAX issue, but it is not-MAX gives no errors regardless of light intensity.
       I also tried decreasing the white level and/or increasing the black level-(per NI Knowledgebase post) all that did was decrease my image quality, error still appeared. The error first appears in imgwaitforimaqoccurrence.vi which is inside imgsessionexaminebuffer.vi.
If I could somehow ignore the error and insert a ~ 500mS delay and then re-attempt to acquire video lock, it would probably work. Just not sure how to do this, or if it is the right approach. Any ideas?

Hey wowens,
I was wondering if you ran just a simple grab example program, and perform the same action of shutting off the camera's light source, do you get the same error? The error you are getting means that the frame grabber is not receiving any data from the camera in the expected timeout period. There shouldn't be any reason why decreasing the light quickly should stop the camera from sending data, as the camera should still be sending some data, like all black pixels or something. I might suggest tapping the data coming in with an oscilloscope to see if the data stops when you decrease the light. If you can't do this, I might suggest altering the code so that you don't stop the loop. You could also look at the shipping example called LL Scan Multiple Channels.VI. What version of the NI-IMAQ driver are you using? I would suggest that you upgrade to the most recent if you don't have it. Other than that it sounds like you need to find out what is causing the error before you start to find a solution.
I hope this helps at least a little. Let me know if you have any questions or concerns. Thanks, and have a great day.
Regards,
DJ L.

Error 0xBFF6001F - Cannot detect recognizable video source

Hi,
I'm using a NI PCI-1433 card with a Sentech camera.
When I try to get a snap from the camera in MAX, I've the following error : 0xBFF6001F - Cannot detect recognizable video source.
I use the icd file given by the camera constructor (Alliance Vision) for the camera parameters.
I have Labview 2012 SP1 and MAX 5.4.0.
Has someone any idea ?
Maugan.

Hi Maugan,
Did you already look at this KB?
Best regards.
Paolo_P
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

Error 1074397153 "cannot detect recognizable video source" in LabVIEW environment and but not in NI MAX

Hi all,
We have first tested our cameralink camera using NI MAX and we were able to grab with out any error.
But when we are getting the Error 1074397153 "cannot detect recognizable video source" in LabVIEW environment when we wanted to acquire from a 16 bit Cameralink standard camera. we are using Labview 2013 SP1 and Vision development module with IMAQ 4.9 driver. Below is the VI pasted
All the camera cables, power cables to the camera are fine.
Kindly let us know what is the issue and any solution to solve it.
with regards,
Sri

-What camera you are using? Did you try with any other software provided with camera vendor?
-Did you check proper interface name?
-Please post MAX screenshot also will be better to understand the changes...
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

TS1368 itunes cannot detect iphone due to the error 0xE8000012

itunes cannot detect iphone due to the error 0xE8000012

For windows read http://support.apple.com/kb/TS1538
For mac read http://support.apple.com/kb/ts1591

Getting error "cannot open" when playing Videos purchased on itunes.

I'm trying to stream videos from my PC to my iPad 2 using the "Videos" app and i keep getting error "cannot open" on any video that I try to play that I purchased through iTunes. Other videos I added that werent purshased through itunes play fine however. Can anyone help with a solution? My iPad is on 5.0.1 if that helps.

I'm getting this error suddenly. I used to be able to stream purchased movies just fine, and now it simply says, "Cannot open." With movies I ripped from my DVDs, they will play just fine, but movies purchased from iTunes give the error every time.
I know I don't have any odd characters in my name like mikesoderstrom had and I haven't changed any account details since the last time it was working a few weeks ago. The only major change I can think of is upgrading to iTunes 11.
My iTunes account says that both my Mac and my Phone are still authorized. Maybe I should try deauthorizing all anyway, but I'd rather not deal with the hassle of re-authorizing, especially if it didn't work for someone who tried it already.
I have no problems with downloading/updating apps, just with Home Sharing purchased movies.

I cannot upload my iMovie video to Facebook, etc. I cannot even attach it to an email, an 'error' message comes up when almost complete. It plays fine in imovies, VLC, mplayerx. Confused, is the file damaged somehow?

I cannot upload my iMovie video to Facebook, etc. I cannot even attach it to an email, an 'error' message comes up when almost complete. It plays fine in imovies, VLC, mplayerx. Confused, is the file damaged somehow?

The Deskjet series printers connect to wireless networks with what is called USB to Wireless.
You will need a supported operating system to connect a Deskjet to a wireless network. Supported operating systems to connect the printer to a wireless network are Windows 7 (32bit and 64bit), Windows Vista (32bit and 64bit), and Mac OS X (10.5, 10.6, and 10.7).
While there is a software download option for Linux distributions, this is not the full featured software that is capable of adding the printer to a wireless network. Most printers have a wireless setup wizard to accomplish this task, but the Deskjet series printers connect in a different way.
Once the printer is connected to a wireless network, HPLIP 3.12.4 drivers should be able to locate the printer.
Click on Installing the Product Software for a Wireless Network Connection to receive instructions to connect to a wireless network using Windows and Mac operating systems.
Click on Software & Driver Downloads - HP Deskjet 3070A e-All-in-One Printer - B611a to download the appropriate software for a supported operating system to connect to a wireless network.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

"internal error cannot detect your device" error...

hi, i have a nokia 5310,sim locked to Rogers, the firmware version of my nokia is 03.63, im trying to update it...im using the latest version of nokia OVI,whenever it starts to intall the update,it stalls, then an error message shows up,"internal error >cannot detect your device",i tried to use windows xp/vista,same error,i also tried the PC SUITE,same error,i noticed that the computer will prompt me that the device is connected (via usb),but at the moment the update starts to intall,it disconnects,( the usb is firmly and securely attached to the device),then right after i click 'finish' on the OVI update screen to go back to the main menu, the device re connects itself to OVI (computer),i hope someone can tell me why this is happening,thank you.

hi, i have a nokia 5310,sim locked to Rogers, the firmware version of my nokia is 03.63, im trying to update it...im using the latest version of nokia OVI,whenever it starts to intall the update,it stalls, then an error message shows up,"internal error >cannot detect your device",i tried to use windows xp/vista,same error,i also tried the PC SUITE,same error,i noticed that the computer will prompt me that the device is connected (via usb),but at the moment the update starts to intall,it disconnects,( the usb is firmly and securely attached to the device),then right after i click 'finish' on the OVI update screen to go back to the main menu, the device re connects itself to OVI (computer),i hope someone can tell me why this is happening,thank you.

Cannot put episodes of American Horror Story onto my Iphone 4s! When I try to sync Tv shows an error message pops up and says these videos cannot be played on this iphone.

Cannot put episodes of American Horror Story onto my Iphone 4s! When I try to sync Tv shows an error message pops up and says these videos cannot be played on this iphone.

Hey dylanburks12,
It sounds like you are seeing issues when attempting to sync videos to your iPod. I have an article that will help explain some possible situations regarding this issue:
iTunes: Videos may be unable to sync to iPhone, iPad, or iPod - Apple Support
http://support.apple.com/en-us/ts1497
Thanks for using the Apple Support Communities!
Cheers,
Braden

Cannot open the pdf/videos in my Linux, Adobe Reader 9. It fires an error...

Cannot open the pdf/videos in my Linux, Adobe Reader 9. It fires an error...
"A 3D data parsing error has occurred"
By any chance have someone help me with this issue? Thanks!

thanks Jono But I cannot see any option to set Target Version.
the options I have are XDP Preview format and PDF Render Format which are set to Acrobat 7 static PDF form.
I have set a permissions password on the form using Acrobat 8 and under Password security settings , I have set the compatibility as Acrobat 5.0 or later. However, When I look at the form properties by opening the same form in LiveCycle, the compatibility still shows Acrobat 8 static PDF form.
How do I get this form to be opened by users in Adobe 7?
Appreciate your quick response.

Error: Recover-RecoverableItem : DPM cannot detect the volume

Hi,
We are currently extracting SQL backups from a secondary DPM server to copy to another device for long term archiving.
We are doing this with a powershell script.
We get this error message: Recover-RecoverableItem : DPM cannot detect the volume E:\ on SERVERNAME. (ID: 31085)
Here's the script:
Add-PSSnapin Microsoft.DataProtectionManager.PowerShell
Add-Type -Path "C:\Program Files\Microsoft DPM\DPM\bin\Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.SQL.dll"
$pg = get-protectiongroup –dpmservername SERVERNAME | where {$_.FriendlyName -eq "SQLSERVERS"}
$ds = get-datasource –protectiongroup $pg
$i = 0
$RestorePath = "D:\restore"
$DPMServerName = "SERVERNAME"
$rp= @(get-recoverypoint –datasource $ds[$i] | sort -Property RepresentedPointInTime -Descending);
$rp_to_restore=$rp[0];
$rop = New-RecoveryOption -SQL -Targetserver $DPMServerName -Recoverylocation CopyToFolder -RecoveryType Restore -TargetLocation $RestorePath
$RestoreJob = Recover-RecoverableItem -RecoverableItem $rp_to_restore -RecoveryOption $rop
Disconnect-DPMServer -DPMServerName $DPMServerName
exit

Hello,
Same problem here, DPM cannot detect the volume I:\ on server xxxxx (ID: 31085)
I've noticed, that the problem is appearing while trying to recover to my usb hdd, while is does recover to internal hdd normally. Some days ago it used to work fine with usb disk too. I don't know what happened.
Any help please???

PCMCIA Wlan card is not detected: Error 1058: service cannot be started

PLEASE HELP!
I am running WXP Pro for over 2 years and I have been connecting to the internet via a wireless pc card in my laptops PCMCIA slot with no problems. Suddenly last week it started to randomly disconnect and reconnect, and now it has gone off completely.
I bought a new WiFi card and still didn't work. I have checked the device manager and the PCMCIA cardbus driver is working fine as is every other device. The wireless card driver and some other network related drivers fail to start no matter what I try and how many times I try. I have tried another laptop and both my old card and the new one work fine.
All the device driver that I try to start have the error
"Error 1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."
The card driver is installed, just not starting, it's like the laptop cannot detect or see the card in the slot
Please help; I am having trouble finding anyone with the same problem after a week of searching the web.

Hi
This behavior can occur if the service is disabled or if the service is disabled for the hardware profile that you are currently using.
To enable the service do this:
1. Click Start, point to Programs, point to Administrative Tools, and then click Services.
2. Double-click the service that did not start.
3. Click the Log On tab.
4. Verify that the service has not been disabled for the hardware profile that you are using. If it has, click Enable.
5. Click the General tab. Verify that the service has not been disabled in the Startup Type box. If it has, click Automatic to have it start when you start the computer.
This was described here in the MS knowledge base article
http://support.microsoft.com/kb/241584

Error says iphone cannot be detected by itunes

AN ERROR SAYS: IPHONE CANNOT BE CONNECTED TO ITUNES, BECAUSE IT CANNOT BE DETECTED

Is your computer usb port usb 2 ? it should work directly connected (no hub).

Error 0 x BFF6001F Cannot detect recognizab​le video source

Similar Messages

Maybe you are looking for

Error 0 x BFF6001F Cannot detect recognizable video source