Error : 00 671: ABAP/4 processor: POSTING_ILLEGAL_STATEMENT
hi all
i am getting update termination while saving PO
when i goto SM13 an dble click on error get following
1 ME_CREATE_DOCUMENT V1 Initial
2 EINKBELEG_WRITE_DOCUMENT V1 Initial
3 MCE_STATISTICS_UPD_V1 V1 Initial
4 MCE_STATISTICS_UPD_V2 V2 Initial
5 ME_CREATE_MRPRECORD_PO V1 Initial
6 ME_UPDATE_QUOTA_DIALOG V1 Initial
7 RV_MESSAGE_UPDATE V1 Error
after clicking the 7 item getting following
Function Module RV_MESSAGE_UPDATE
Status Update was terminated
Report LSYDBU27
Row 7
Error details Class: 00 Number: 671
00 671: ABAP/4 processor: POSTING_ILLEGAL_STATEMENT
plz help me out
regards
kunal
we just deleted and created the conditon records for printing in NACE for neu and then DB02 updated
Edited by: SAP Learner on Dec 22, 2009 1:20 PM
Similar Messages
-
Dear Experts,
I am facing the problem, with T-code MIRO.
When we try to complete his activity in MIRO, it terminates with error 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC, but it gives the billing no. Again when we try to display the billing no, it says that the doc no is does not exist.
I have checked with number ranges in FBN1 also, How to change the status to "0" in FBN1 ? Wont it be a problem if we change the status to "0" now in production server..!!!
the update error as follows
1 CKML_F_POST_INDEX V1 (no retry) Initial
2 POST_DOCUMENT V1 Initial
3 FI_WT_POST V1 Initial
4 K_PARKED_DOCUMENT_DELETE V1 Initial
5 K_DOCUMENT_UPDATE V1 Initial
6 HFPV_POST_RPSCO_V2 V2 Initial
7 HFPV_POST_RPSCO_V2 V2 Initial
8 G_GLDB_POSTING_A V1 Initial
9 AC_DOCUMENT_MM_UPDATE V2 Initial
10 K_OPEN_ITEM_POST V1 Initial
11 MCE_STATISTICS_UPD_V2 V2 Initial
12 ME_UPDATE_INVOICE V1 (no retry) Initial
13 MRM_INVOICE_DOCUMENT_POST V1 Error
14 SD_SCD_IV_SELCRITERIA_SAVE_DB V1 Initial
15 SWE_EVENT_CREATE_IN_UPD_TASK V1 Initial
Error details
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Kindly suggest me the way how to do it..
Thanks
PriyaHi,
please check the numer ranges for the Billing Document in SPRO.
I guess there is something wrong with it.
The error occurs if you want to save a Billing document and the primary key for the number still existists in the database. Are you using internal number range?.
Have you changed the number range especially the current number manually?
Perhaps it has something to do with your activities from this thread.
How do I change invoice numbering.
Have you transported the number range object?
Thanks.
Deepak Sharma -
ABAP/4 processor: POSTING_ILLEGAL_STATEMENT in WSM3
hi all,
i am getting dump while doing listing in WSM3 stating 'Update was terminated '.
the detailed message is as follows:
Transaction.. WSM3
Update key... 4BCEF56BE790016000000000C0A80054
Generated.... 22.04.2010, 08:12:55
Completed.... 22.04.2010, 08:14:04
Error Info... 00 671: ABAP/4 processor: POSTING_ILLEGAL_STATEMENT
i searched for SAP notes also but unable to find one.
Regards
SunilHi Oilivia,
I have the same issue while using SO_DOCUMENT_REPOSITORY_MANAGER Function Module.
And I implemented the Note 1023041 as per your suggestion.
I'm still getting the same Update Termination 'POSTING_ILLEGAL_STATEMENT'.
(Invoice Emailing)
Any other suggestions?
Thanks,
Sowmya -
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Hi,
While creating a billing document I get following error
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Pls help
Points will be rewarded.
ThanksDear Sirs,
Even i am facing the same problem, but with T-code MIRO.
When we try to complete his activity in MIRO, it terminates with error 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC, but it gives the billing no. Again when we try to display the billing no, it says that the doc no is does not exist.
I have checked with number ranges in FBN1 also, How to change the status to "0" in FBN1 ? Wont it be a problem if we change the status to "0" now in production server..!!!
Kindly suggest me the way how to do it..
Rdgs,
Deepa -
Dear experts,
I got an error while creating a process order.System allowing to create a process order after saving througing an error
" Express document "Update was terminated" received from author "GLP Developer"
*'Error Info... 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC".*
I did changed the number ranges for a particular order type.Created one order and prcessed.But again getting the same error while processing second order.
Thanks in advance,
Rambabu.K.
Edited by: RamPPQMPM on Nov 24, 2010 6:49 PMThe system is telling you that you have a duplicated key (record) in a table. You have to take a look into the userexits or enhancements applyied to your transactios in ordert to find a bad modifying of an stardard structure.
-
Error: 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Hi Guys,
I am trying to update the below transaction:
SPRO - Financial Accounting - Financial Accounting Global Settings - Tax on sales/purchases - Calculation - Settings for tax calculation in Brazil - Define FI/MM tax codes
But an error occurs after I save and generate the SAP request.
Error Info... 00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC
Does anyone know how I can figure out it?
Thanks
Daniel DortaHi,
very the following Notes which can point to a solution:
734545 Cond.-Based Tax Calc: Shortdump when deleting defau
716654 Error in Condition Consistency Tool J_1B_CBT_CONSIS
686780 Consistency of Condition Tables of BR Tax Calculati
You can try to search more notes belonging to brazilian localization (xx-csc-br) -
Error 00 671 Abap processor : COMMIT_IN_POSTING
Hi Eexperts,
I have a requirement to send a smartform as a fax and mail at the time of saving a Sales Order. I have configured it accordingly. But while saving a Order It is throwing an Error into INBOX as below...
Update was terminated
System ID.... DVD
Client....... 224
User..... SEKJ
Transaction.. VA02
Update key... 46CB21AFEAF869A4E1000000921B4FA9
Generated.... 08/22/2007, 12:51:42
Completed.... 08/22/2007, 12:51:49
Error info... 00 671: ABAP/4 processor: COMMIT_IN_POSTING
Can anybody know what this error is and If possible Please send me OSS Notes regarding this..
Regards,
Sekhar.JHi Experts,
The requirement is to update the Qty & Status during POSTing in MIGO if the material is Kanban managed.
Requirement :
Scrapping using 551/ 552 should accordingly increase/ decrease the Kanban Qty and modify the status (visible in PK31 and PKPS table)
Approach:
Implemented BADI "MB_MIGO_BADI" & called the FM to update Kanban status & Qty. But got the error of COMMIT_IN_POSTING.
Any pointers to user-exit/badi which would help to fulfill the above requirement.
Thanks,
Best regards,
Prashant -
Hi Gurus ,
I am creating material with class and characters. class type is 001
While creating material through MM01, in classification view I am giving class and after that characteristics value of that class and after that material is saved but system is not taking the characteristic value and message is coming as --u201CExpress document "Update was terminated" received from author u2026.u201D
In SAP inbox message is coming as -- u201CError Info... 00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERRORu201D
And in SM14 error message is--u201CCLVF_VB_INSERT_CLASSIFICATIONu201D
Function Module CLVF_VB_INSERT_CLASSIFICATION
Status Update was terminated
Report LCLVFF40
Row 124
Error details Class: 00 Number: 671
00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Same type of error is coming while adding characteristics value for release strategy class type
032 following error is coming for that.
Function Module CLVF_VB_INSERT_CLASSIFICATION
Status Update was terminated
Report LCLVFF40
Row 85
Error details Class: 00 Number: 671
00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Please replyClose
-
Hi
While uploading duty rate files provided by the data provider customs info ,at the time of saving , its throwing the below error .
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC .
There is no duplicate data in the XML file and data provider has also confirmed the same. Let me know if anybody has come across the same issue .
Thanks in advance.
Regards,
VaniHi Jasmit
Yes , as you have mentioned ,
After HTS data upload for 2012 through XML file ,system had 2 validity periods 2012-01-01 9999-12-30 and 2012-01-01 2012-12-31 . Hence now there is a issue of duplicate record ,since both periods are valid .
But the data provider customs info has confirmed they have sent only one record with validity period 2012-01-01 2012-12-31 .in the XML file .
How the record with validity period 2012-01-01 9999-12-30 is now there in the system
Is there a chance that the XML upload pgm in our system has generated this record ? How the upload pgm works ?
Regards,
Vanathi -
00 671: ABAP/4 processor: ROLLBACK_IN_POSTING
Hi All,
We are facing update termination error in ME21N T-Code.
Details are given below:
Function Module ME_CREATE_DOCUMENT
Status Update was terminated
Report LEINUU03
Row 33
Error details Class: 00 Number: 671
00 671: ABAP/4 processor: ROLLBACK_IN_POSTING
Please help..!!!
Regards,
Nitin SharmaHi
Try it. Not sure it will help or not? Tcode OMCQ convert the message no 671 to warning and save.
Regards,
Raman -
671 ABAP/4 processor: SAP SQL_ARRAY_INSERT_DUPREC
i'm getting this message everytime i try to post something(f-02, vendor/ miro/migo) any type of entry.
can someone please explain this to me? the message is too technicalfor me to comprehend. so i hope the solution isnt that technical..
points will be gratitiously rewarded. thanksThe program ran fine without problems but it didnt fix anything. This is the message you wanted. Do you also want the source code extract?
error analysis
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Date and Time 06.02.2012 20:48:12
Short text
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLGLIU" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "INS_FAGLFLEXA" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
"SAPLGLIU" or "LGLIUF1A"
"INS_FAGLFLEXA"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INS_FAGLFLEXA" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "gcecc62"
Network address...... "192.168.10.1"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "Intel 80686 (Mo"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 6
Shortdump setting.... "full"
Database server... "GCECC62"
Database type..... "ORACLE"
Database name..... "ECC"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 29 2006 00:18:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 75
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 3135672
Heap.... 0
Page.... 0
MM Used. 2660632
MM Free. 473408
User and Transaction
Client.............. 800
User................ "SAPUSER"
Language key........ "E"
Transaction......... "FB01 "
Program............. "SAPLGLIU"
Screen.............. "RSM13000 3000"
Screen line......... 2
Information on where terminated
Termination occurred in the ABAP program "SAPLGLIU" - in "INS_FAGLFLEXA".
The main program was "RSM13000 ".
In the source code you have the termination point in line 1199
of the (Include) program "LGLIUF1A".
The program "SAPLGLIU" was started in the update system.
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
procedure "INS_FAGLFLEXA" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLGLIU "; its source code begins in line
1184 of the (Include program "LGLIUF1A ". -
ABAP/4 processor error.
Hi All,
We are sceduled custom program in background,
but this job was failed error message is " ABAP/4 processor: CONVT_CODEPAGE".
and the system is Unicode Enabled.
please provide the solution.
Points will rewareded.
Regards,
DSK.Check This link it is help full..
http://www.sapnet.ru/abap_docu/ABAPREAD_DATASET.htm
CX_SY_CONVERSION_CODEPAGE
Cause: Conversion is not possible. The data is read as far as possible; text data for which the conversion did not take place is undefined (see also note below)
Runtime Error: CONVT_CODEPAGE (catchable)
CX_SY_CODEPAGE_CONVERTER_INIT
Cause: The required conversion is not supported (for example, due to specification of a language not supported during conversion using SET LOCALE LANGUAGE).
Runtime Error: CONVT_CODEPAGE_INIT (catchable)
Regards,
VIjay -
Hi,
We are getting "Express document "Update was terminated" received from author "XXXX" error while saving an article using MM42. We executed listing in "Listing" view in MM42 and saved the article.
Then the error "Express document" comes
The error message in the "express document " is given below:-
Update was terminated
Error info... 00 671: ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Exception :-CX_SY_OPEN_SQL_DB
Thanks in advanceHi,
See in transaction SM13
Normally you foind your update task and you can repeat it in foreground debug mode
Rgds -
ABAP/4 processor: MESSAGE_TYPE_X
Hi Friends,
I have put the process chains for Transfer exchange rate
1) first i have prepare start Variant -- Immediate -- save
2) abap program drag and drop : program name given : RSIMPCURR
varient create and save schedule .
some errors are shown
ABAP/4 processor: MESSAGE_TYPE_X
Step 001 started (program RSPROCESS, variant &0000000002503, user ID BWREMOTE)
Thanks.Are you loading the selection values of this program?
Check and confirm by running the program manually in SE38?
Thanks. -
ABAP/4 processor: SYSTEM_NO_TASK_STORAGE
Hi Experts,
I have tried to load one of the master datasource(ocrm_srv_ibase_attr) from crm(qa system) to bw system. the job is getting cancelled in the source system with below error message.
ABAP/4 processor: SYSTEM_NO_TASK_STORAGE
Job cancelled
I have tried to extract data this datasource by using rsa3 tcode and its going into short dump with time_out message.
Could any one faced this type of issue...Any clue...
Thanks in advance.
Regs,
Vachan
Points will be assigned.Hi,
Normally this error happens due to insufficient memory to process the requests.
Make more "memory" available for the program xecution. To do so you must iterativly adjust the parameter mentioned in the shortdump.
It might be necessary to put more RAM or increase swap if these parameter have to be increased significantly. See also note 20527.
You also need to
check parameter abap/heap_area_dia and abap/heap_area_nondia
I hope this helps you to overcome the problem.
Regards,
Venu
Maybe you are looking for
-
How to convert class file into exe
I have made a simple calculator using swing.now i want it to be used as an application from the desktop..How can i do it?..any suggestions?
-
Using presentation variable in OBIEE 11g
Hi, Is is possible to use a prompt to filter data from two sections of a dashboard? My dashbaords contains two sections , each pointing to seperate reoport. Can I filter data in the two reports using parameter selected in one prompt? If not possible
-
Hi everyone! I have problems with my wireless connection. It's very poor, it's delaying to load every webpage, also router's config panel. Googlying I arrived to this: https://patchwork.kernel.org/patch/2174121/ It's the same message that I've read i
-
Computer Science Student - MPB 13" i5 or i7?
I will be starting the first year of a 4 year Computer Science course in September and wanted to know which MacBook Pro 13" model would be best for me, the i5 or the i7? Considering my CS course is 4 years, would the i7 processer model with the 8GB R
-
Data Warehouse and ETL tools for data verification ?
Data Warehouse and ETL tools for data verification ? How need to to data verification using ETL tool ? Also how to relate this thing to datawaehouse ? Thanks in Advance