Error 00058 in SAPMM06I 0102 (InfoRec) call by MM42 (master article) IS-R

Hi all,
We are in a IS-Retail, and after call the info record in the tcode MM42 (master article, ie: the program that controls the update is SAPLMGD2, no SAPLMGD1 as in R/3) in the view of purchasing org data 1 (SAPMM06I 0102) the system give the error 00058 (Entry  S2  does not exist in T007A - check your entry). The entry exists (I check it with tcode FTXP). This error is after support-packages, after a lot of legal changes (in this supports, we have the field VATDATE in BKPF and so on by legal changes in European Union). If I modify the InfoRec like in a R/3 (tcode ME12) this error not happens.
If somebody has had the same problem, please let me know any suggestion. I've been debugging it, but I cannot view the message error (I write coding in ABAP), it stops in a dynpro of debugger with the display 'OFL'.
Any suggestion or advice is wellcomed, after I will send a message to SAP.
Thanks in advance.
Regards,
Eduardo

Hi,
I have the same problem.
Have you find a solution?
Thanks in advance.
Have a nice day!
Irina.

Similar Messages

  • Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015. SQL 2012 SP1

    Hi,
    Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
    I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
    TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
    The following error has occurred:
    The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'. 
    Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
    Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
    is not a possible owner of the resource.
    For help, click:
    http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
    BUTTONS:
    OK
    I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
    Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
    application SQL Server SG1DB. Could not move the resource to available storage. An error occured
    while moving the resource BCK_SG1DB to the clustered service or application Available Storage
    Any ideas why it failed or how could I delete the SQL server instance from Clauster?
    Thx

    Hello,
    Please read the following resource.
    https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

    I am having this error pop up very frequently on some new SAP systems.  This will randomly happen and keep us from being able to release transports and import them in STMS.  I receive the following error:
    There was an attempt to start the transport control program tp using the local RFC interface.
    An error occurred here.
    Error code: 4
    RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
    - When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
    timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
    out during connection setup (check that partner exists
    - When checking the TP System Log I receive the same error.  The RSTPTEST report does not give any additional information.  SM21 shows a warning and an error:
    Warning:
    Communication Error, CPIC return code 020, SAP Return code 456
    Dialog Process No. 000
    Problem cl: SAP web AS problem
    Package: STSK
    Further Details:
    Module Name: thxxhead
    Line: 7488
    Error Text: 020456
    Caller: ThRecei
    Error:
    Problem cl: transaction problem
    Package: STTO
    All of these errors are only pointing to a time out.  I cannot figure out why this is happening.  I checked the TMS RFC connection in SM59 and they are fine.  I have been able to work around this issue in 2 different ways.  First, I can delete the files in the "\trans\tmp" directory on the server.  Sometimes this resolves the error.  Else I have to restart the system.
    I need to understand where this issue is coming from and how to resolve it.  It is becoming more and more frequent.  Thank you for your help!

    Hi,
    i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
    Symptoms were:
    se38 > RSTPTEST timed out sometimes(not always)
    sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
    STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
    Transports failed mostly with the same error.
    The error log was somewhere deep in ST11. It could not resolve our FQDN.
    The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
    We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
    The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
    127.0.0.1   localhost   computer-name.ourSuffix.com
    After this line has been added, the error stopped and the transports work again.
    I hope it helps. Good luck.

  • URGENT: Bug in Adobe Acrobat X /// Acrobat.exe Runtime Error! R6025 - pure virtual function call

    Hello
    I work usually with large PDF documents, and I was trying to convert a PDF document of 1000 pages ONE THOUSAND PAGES, to little PDF documents of 10 MB each one.
    When I tried to convert the PDF file into little ones, craaashhhhhhhhhhhhhhhhhh
    I got this message:
    Acrobat.exe Runtime Error! R6025 - pure virtual function call - Microsoft Visual C++ Runtime Library
    This seems to be a BUG AS BIG A GRAND PIANO... so I would like someone from Adobe tell me how may I solve this problem or if they will release an update soon?
    Thank you

    This is a user to user forum and we don't post information here (or anywhere else public) about what may or may not be in future patch releases.
    If you have a bug with an Adobe product you must report it using the correct form.

  • How to capture errors when a Function module is called as BACKGROUND TASK

    How to capture errors when a Function module is called as BACKGROUND TASK?.Please advise.
    FUNCTION ZRPM_DELETE_PROJECT_DATA_API.
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(IV_EXTERNAL_ID) TYPE  RPM_TV_EXTID OPTIONAL
    *"     VALUE(IV_PROJECT_GUID) TYPE  RPM_TV_GUID OPTIONAL
    *"     VALUE(FLAG) TYPE  BOOLEAN OPTIONAL
    *"  EXPORTING
    *"     VALUE(EV_RC) TYPE  I
    *"     VALUE(EV_MSG) TYPE  STRING
    *"     VALUE(ET_MSG) TYPE  RPM_TT_MESSAGES
      IF flag = cl_rpm_co=>sc_true.
        Call function 'RPM_DELETE_PROJECT_DATA' IN BACKGROUND TASK
          EXPORTING
            IV_EXTERNAL_ID  = IV_EXTERNAL_ID
            IV_PROJECT_GUID = IV_PROJECT_GUID
          IMPORTING
            EV_RC           = EV_RC
            EV_MSG          = EV_RC
            ET_MSG          = ET_MSG.
        COMMIT WORK.
      ELSE.
        CALL FUNCTION 'RPM_DELETE_PROJECT_DATA'
          EXPORTING
            IV_EXTERNAL_ID  = IV_EXTERNAL_ID
            IV_PROJECT_GUID = IV_PROJECT_GUID
          IMPORTING
            EV_RC           = EV_RC
            EV_MSG          = EV_MSG
            ET_MSG          = ET_MSG.
      ENDIF.
    ENDFUNCTION.
    In above code how to capture 'EV_RC' when FM is called as background task.

    Prakash,
    CALL FUNCTION IN BACKGROUND TASK allows no IMPORTING parameters, so that your code will produce a syntax error.
    The calling program can only handle errors of remote function calls (RFC) if these are either
    - synchronous RFC  (that is CALL FUNCTION ... DESTINATION ...) or
    - asynchronous RFC (that is CALL FUNCTION STARTING NEW TASK ... DESTINATION ...).
    Both synchronous and asynchronous RFC allow the capturing of errors by means of exceptions. But that is a different topic.

  • C++ STL library error: Non-const function ... called for const object

    Hello,
    I'm using the Forte Developer 6 Update 2 C++ compiler and standard library on Solaris 9 SPARC. I've installed the recommended patch set for C++ (both the workshop and platform patches).
    In my code, I have a STL set with some elements that I want to modify, say:
    typedef set<SomeClass> MySet;
    typedef MySet::iterator MySetIter;
    I'm trying to look for an element, then update some of its fields:
    MySet theSet;
    SomeClass sci;
    MySetIter it = theSet.find(sci);
    if (it != theSet.end()) {
    it->update_some_fields();
    The above code fails with the following error (some details scrapped):
    Error: Non-const function SomeClass::update_some_fields() called for const object
    Which is weird, since set::find() seems to return a set<...>::iterator, not a set<...>::const_iterator!
    If I try a workaround, like this:
    if (it != theSet.end()) {
    SomeClass &tmp = *it;
    tmp->update_some_fields();
    I get this other error:
    Initializing SomeClass& requires an lvalue.
    Is there some way to convince the Forte compiler to work around this situation (most likely a compiler / library bug)?

    This was fixed, too, by replacing the set with a map. It seems that the issue was related to the fact that any change made to a set member is supposed to not modify the elements that make up the key (the elements that are used in the comparison function to determine the ordering). The Windows (dinkumware) implementation of the STL allows set modifications, though I don't know how they check that the key fields are not modified. The Solaris implementation (and the GNU implementation, too) disallows any modifications made to set members. At least that's what a person more knowledgeable of C++ in our office found out. So I don't think the issue was related to template constructors or any unimplemented features after all.

  • Getting error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure

    I have create Logic App under Azure App Services, I am getting
    error while using HTTP connector and calling POST action to a Web API which is deployed as website on Azure.
    Following are the screen shots:
    Login App Connector Diagram:
    hema

    Marking as answered since no response on request for more information - assuming that you found what was wrong in the inputs. Let us know if you're still having trouble.
    http://twitter.com/joshtwist

  • ERROR CODE 2STF/8/3: S-ATA BUS O-Master

    I was running Pro ToolsLE on my iMac G5 and then all operations stopped or froze, I forced quit, lost what I was working on when it stopped. Then I tried to restart after deleating the pro tools prefs file and the gray screen with apple symbol and indicator comes up and doesn't continue to boot up.
    I ran Tech tools from the install disc and the ERROR CODE 2STF/8/3: S-ATA BUS O-Master comes up. After researching further I think the Hard Drive has Failed!!
    Can this be true? I have not used the computer that much. I will be calling Apple Care. Has anyone else experienced this, and is my iMac G5 not as reliable as I thought?

    Welcome to Discussions - hard drives can fail at any point, the amount of use is no indication of longevity. My iMac G5 is a Rev A, and (fingers crossed) the original drive is still working flawlessly. In every batch there are some that will fail prematurely and others that will last long past their fail date. Please do call Apple Care and see what they say.
    See if there's any way you can put your computer in Target Disk Mode and get your data off the drive before it goes in for repair.
    Miriam

  • There was an error opening the database for the library "/Volumes/Aperture Master/Unknown/Aperture Pictures/Aperture Library.aplibrary".    what do I do now?

    There was an error opening the database for the library “/Volumes/Aperture Master/Unknown/Aperture Pictures/Aperture Library.aplibrary”.
    What do I do now.  I cant access the photos on the drive.  The only option is Quit?  what ??????????
    Please help ready to throw computer and drive out the window.  I have a deadline of next Tuesdaythe 11th.

    Start Aperture while holding down the option and command keys. You'll get a Photo Library First Aid dialog as below.
    Try Repair Database first. If that doesn't work, then redo the startup with option-command and try Rebuild Database. These repair processes can take a long time with a larger library.
    If all that fails, you can try creating a new library from scratch and then try importing the old library into the new. This sometimes can fix problems that can't be repaired the First Aid way.
    Also make sure the drive where the Aperture library is located is working properly. You can check it with Disk Utility app.

  • I keep getting an error (for twelve updates), when trying to update CS5 Master Collection.  I used chat, and was told to come here.

    I keep getting an error (for twelve updates), when trying to update CS5 Master Collection.  I used chat, and was told to come here.

    update directly, http://www.adobe.com/downloads/updates/

  • Error Code 2STF/8/3:ATA-100 ata-6-Master

    Hello,
    I've been working with my ailing eMac G4 for a couple weeks now. Nothing is working. When I run Quick Test on the Apple Hardware Test (after booting off the Install and Restore Disk) I get an "everything is fine" message. Then, when I run the extended test, I get the following error code: 2STF/8/3:ATA-100 ata-6-Master.
    Does anyone know what this means?
    Thanks.

    steve:
    Supposing that you HDD is sound, and I am a bit unsure, try reformatting and installing as per step-by-step directions here:
    Formatting, Partitioning Zeroing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    Boot from the install CD holding down the "C" key.
    Select language
    Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select Partition tab in main panel. (You are about to create a single partition volume.)
    Select number of partition in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    Type in name in Name field (usually Macintosh HD)
    Select Volume Format as Mac OS Extended (Journaled)
    Click Partition button at bottom of panel.
    Select Erase tab
    Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    Check to be sure your Volume Name and Volume Format are correct.
    Optional: Select on Security Options button (Tiger) Options button (Panther & earlier).
    Select Zero all data. (This process will map out bad blocks on your HDD. However, it could take several hours. If you want a quicker method, don't go to Security Options and just click the Erase button.)
    Click OK.
    Click Erase button
    Quit Disk Utility.
    Open installer and begin installation process.
    Installation Process
    Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
    Check box to install X11 (Tiger) BSD Subsystems (Panther & earlier).
    Proceed with installation.
    After installation computer will restart for setup.
    After setup, reboot computer.
    Go to Applications > Utilities > Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select First Aid in main panel.
    Click Repair Disk Permissions.
    Connect to Internet.
    Download and install 10.3.9 Combo Update
    Computer will restart after updates.
    Go to Applications > Utilities > Disk Utility.
    Select your HDD (manufacturer ID) in left side bar.
    Select First Aid in main panel.
    Click Repair Disk Permissions.
    Please let me know how this goes for you.
    Good luck.
    cornelius

  • Error Code: 2STF/8/3: S-ATA BUS 0 - MASTER

    My iMac G5 is hanging up at times (spinning wheel) and then hangs for 30 minutes or more on restart before eventually booting up. I did a hardware test which revealed the following error: "Error Code: 2STF/8/3: S-ATA BUS 0 - MASTER" in the mass storage portion of the test.
    Any suggestions on next steps?

    Please back up your data immediately, preferably by cloning them to n external firewire drive using SuperDuper!.
    It looks as if your hard drive is about to bite the dust, new large ones are not at all expensive, and with your data cloned, it's very easy to migrate to a new drive.
    Let us know how things work out for you,

  • Error while running Java program which call a file upload servlet

    Hi all,
    I have a java program which calls a servlet and sends the file to be uploaded by the servlet. I used Jbuilder to create java program and servlet program. I compiled both the programs and compilation suceeded and my class files are avaialbe in
    WEB-INF/classes/content directory. But now I am trying to run the Java program(this contains main method) from the command prompt, which should inturn call my servlet.(I have web.xml file inside WEB-INF dir). But I receive the following error
    C:\tomcat5.5.15\apache-tomcat-5.5.16\webapps\content\WEB-INF\classes\content>java MultiContentSender
    Exception in thread "main" java.lang.NoClassDefFoundError: MultiContentSender (w
    rong name: content/MultiContentSender)
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
    at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
    3)
    at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
    at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
    at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
    My dir strcture is as below
    TOMCAT_HOME/webapps/content/WEB-INF/classes/content/*.class
    I am not able to figure out the error, can anyone throw some light on this issue.

    You are trying to invoke the class from the command prompt. My guess is that MultiContentSender contains a package, which means that you'll need to add your WEB-INF\classes directory to the classpath before it will work. Classes stored in this directory are expected to be invoked through tomcat, which builds it's own classpath.

  • Error when Interative Adobe Form is called from Webdynpro ABAP.

    Hi Experts,
    I trying to call a Interactive adobe form from ABAP Webdynpro application but I am facing the below error.
    Line: -
    The following error text was processed in the system GJD : User session (HTTP/SMTP/..) closed after timeout
    The error occurred on the application server az18u021_GJD_01 and in the work process 0 .
    The termination type was: ERROR_MESSAGE_STATE
    The ABAP call stack was:
    Method: PREPROCESS_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    Line: -
    When I uncheck the enabled property of the Interactive From in the Page of the WebDynpro I am able to execute the application successfully.But the Adobe form behaves as a Static Form when I uncheck the enabled property.
    So kindly provide your valuable suggestions to avoid the above error when I am calling a Interactive adobe form from Webdynpro ABAP.
    Thanks in Advance.
    Regards,
    Arun.

    Hello,
    Hello, are you sure you have your ADS credentials configured correctly and valid? I guess you know that is the only difference between clicking enabled on true or false. If you are not sure, you can use SE38, search for FP_* and pick some reports to check the licencing. The names of the reports are good enough to recognize the right one.
    Or maybe that is a security problem? Have you checked the ADS_ERROR string? Did you use the ADS trace?
    check: http://help.sap.com/saphelp_nw70/helpdata/en/2c/241a427ff6db2ce10000000a1550b0/content.htm
    and especially note 999998
    Regards, Otto

  • Error during installation of ECC6- system call failed

    Dear all,
    i encounter the error as below during sap installation. its looks like the ID issue, but this id (fbqadm) is using by me to log into the windows. please help me.
    thank
    ERROR      2009-03-17 10:07:25.583 [syxxsyshlp.cpp:78]
               syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
    FSL-00001  System call failed. Error 1326 (Logon failure: unknown user name or bad password.
    ) in execution of system call 'LogonUser' with parameter (fbqadm, SAPFBWDEV01, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1014) in file (synxccuren.cpp).
    TRACE      2009-03-17 10:07:25.813 [iaxxejsbas.hpp:408]
               handleException<ESyException>()
    Converting exception into JS Exception ESyException.
    TRACE      2009-03-17 10:07:25.813
    Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException

    problem fix after reboot the server

Maybe you are looking for