Error 00336 when deleting

I'm administrator and i try to delete some accounts, oportunities, etc and the system tell to me: "The record can not be deleted (SBL-ODS-00336)"
I'm administrator and i have all posible grants.
Any idea?

I can do a list of opportunities. Also i can invoke to a batch delete, but the problem persist because the batch process fail with the same error that manually delete (you can't delete the opportunity)
I'm thinking about one posible solution: With a webservice update the state of all oportunities and after that delete all with batch delete

Similar Messages

'Error occurred when deleting master data (RSDMD118)'

Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.

Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba

Error 8 When deleting Report

I am using the save report.vi to save a Test result. When I start the test the first time, the file is deleted before saving. When I start it more often i receive and Error 8 at the delete file.
Because i ignore the error, save Report.vi opens a dialogue for replace or cancel. Replacing will overwrite the file.
When i stop the program and run it again, I do not receive the error or the dialog box for the fist saving action again.
I tried some application to delete the refnum but i couldn't. So what can i do to delete the file?
Attachments:
Report_save.zip ‏957 KB

Hi,
I've had a look at your application and the access denied error stopped when I closed the file.
Your application can't delete the file because it is still open. The first time, the file is not open so there is no problem but when you open it once, you're not allowed to delete it before closing the file.
To avoid this problem what you could do is go in the Save report to file vi (which is in your save report.vi) and close the file after writing into it.
See details on the picture attached.
Hope this helps !
Julien
Attachments:
Save_report_to_file.jpg ‏34 KB

I am receiving the following error message when deleting email messages

I am a new Apple Mac user and aside from converting me from the other useless PC operating system, I am still learning my way around MAC OS X Mavericks.
I am receiving the following error message when trying to delete an email message.
The Message "XXX XXXXXX XXXX XXXX by XXXXX XXXXXXX" could not be moved to the mailbox 'Trash" - veyron007(outlook)"
The IMAP command "UID COPY" (to deleted) failed for the mailbox "INBOX" with server error : Error 9.
Please try again later.
The error message above is exactly as it appears in the error box.
Does anybody know why I am receiving this message?
Does anybody know the correct procudure for loading email accounts with (OUTLOOK, OPTUSNET, etc)
Do I use IMAP or POP3 for OUTLOOK?
I look forward to receiving a reply.
Thanks

Having SSL turned on is supposed to be a lot safer (some require it), I wouldn't want a connection without.
SSL stands for Secure Socket Layer and using it means your connection to the server is encrypted.
Especially when using wifi your connection is prone to eavesdropping, I do not use wifi.
You can set a mail program like OSX's Mail.app to keep the POP mail on the server, but IMAP is my weapon of choice.
IMAP and POP3 are protocols. Mail.app (or Mail) is a client.
For the difference between POP and IMAP, look here:
http://www.geek.com/mobile/geek-101-pop-vs-imap-1536343/

Error message when deleting Business transaction: Activity in CRM

Hi All,
I am trying to delete a couple of Activities from CRM (Production system) and encounter two error message: "Enter a Business Partner" and "Administration header not found."
I have tried three ways to delete/archive the activity numbers in the system:
1) Using T code: CRMD_ORDER and then while in change mode - trying to delete the activities. When I tried this I get a warning message: "Enter a Business Partner" after I hit enter the warning: "Administration header not found." comes up and then takes you to the Easy access Menu after hitting enter.
2) I used T code SE38 to open program: "CRM_Order_Delete", here I entered the activity #s that I want to delete, the Activity Transaction type, select check box "Parallel" and then execute. I see a job log which says "Number of archived records = 3", the log shows that no records were deleted.
3) I have also tried archiving using T code SARA. But this also didn't seem to work. Here, I entered the Archiving object: CRM ACTON, then click on Preprocessing. I created a variant with the transaction type and activity numbers then set the start time to immediate and executed (F8) it. Even then I was not able to archive these activities. I did set the activities to status Complete.
Am I missing something? Appreciate your help.
Regards,
Ramesh
Edited by: Ramesh Nallabelli on Oct 9, 2008 9:55 AM

Received response from SAP support partner:
Please verify first if the issue is caused by badi implementation
of ORDER_SAVE badi. Please check method prepare and check_before_save.
Maybe inside your implementation the function crm_order_read is called
but that is not possible in case of deleting a document as document is
not available anymore.
If that doesn't work try this one:
Please check to see if you have a badi ORDER_SAVE method
CHANGE_BEFORE_UPDATE. Please deactiviate the ORDER_SAVE Badi and retestthe deletion.
This is how we resovled our issue - hope this helps someone else:
Check using T Code: SE80 to look for a BADI implementation which used BADI: ORDER_SAVE:
SE80-> Package: Z* (look for custom packages) -> Look under enhancements for any BADI Implementations which have used ORDER_SAVE (double click implementation and in the right pane look under Definition name).
Click 'Change' and deactivate this implementaiton. Now try to delete the CRM transaction. The error msg should not pop up now. Once deletion is completed reactivate this implementation.
This is just a work around. The problem lies in the code and the code within the implementation should be debugged and fixed so that this error message does not come up again.

Error found when deleteing a leave request

Hi,
I am getting an error when I am deleting a leave request on ESS i.e.
Work item 000000000000 cannot be read
Please help me on the same.
With Regards
Gaurav Mittal

Hi,
No the thing is that I have to make it automatically for all the users, as all of them are facing the same problem. Please give a solution so that It will delete when the user want to delete his leave request from ESS automatically, not by going into R/3.
With Regards,
Gaurav

Item Category not Defined Error message when deleting a batch item in Deliv

Hi,
I am trying with a Intercompany transfer . So after creating Interco. Transfer we have followed with a delivery document.
Now,we would like to delete the delivery document. For your info. Del. doc is still open. We haven't gone for Goods issue or anything else.
So,we tried removing the batch line item in batchsplit tab of the delivery and then deleting the delivery document.
But we get the error message "Item catgeory Not defined". but we could see entries for Item category Determination with the particular Delivery typeItem Category Group from Material MasterItem Usage+Item Category.
Why does system throw "Item catgeory Not defined". when there are entries for particular determination available .
And this seems to be Syste
Thanks,
Dhilipan

Hello Sandy,
Thanks for ur update. But its ticked already.. We checked it.
But we still face this issue. And we are not able to replicate the same issue in QA..What cud be the reason.
But Config..seems exactly similar to Pro. and QA
Thanks,
Dhilipan

Error 7343 when delete a recordin database and hierarchical tree

I got this error after delete a record and call the procedure to refresh the hierarchical tree.
This is my code:
PROCEDURE LOAD_TREE IS
htree ITEM;
rg_id RecordGroup;
errcode number;
BEGIN
rg_id := find_group('RECORD_GROUP_POPULA_TREE');
errcode := populate_group(rg_id);
-- Find the tree itself.
htree := Find_Item('HIERARCHICAL_TREE.TREE');
-- Populate the tree with data.
Ftree.Set_Tree_Property(htree, Ftree.RECORD_GROUP, rg_id);
END;
I put a code at the trigger KEY-COMMIT to refresh the hierarchical tree always the button F10 is pressed. Look:
begin
commit;
LOAD_TREE;
end;
When I insert records that´s ok...the problem is when I delete records.
Thanks!
Sabrina

I found the solution after read this thread: Hierachical tree delete node
Thanks
Sabrina

Console errors "Verification failed with 1 errors" and when Deleting Overrides

Hi Guys,
When trying to delete an override for a unix server I was prompted with this error:
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
: Verification failed with 3 errors:
Error 1:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA refers to an invalid sub element Filter.
Error 2:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=ef78d342-5a82-d629-224d-2e476003f6e1,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=ef78d342-5a82-d629-224d-2e476003f6e1,LanguageID=ENA refers to an invalid sub element Filter.
Error 3:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=06522f67-c195-2dfa-c310-a0134b961fc4,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=06522f67-c195-2dfa-c310-a0134b961fc4,LanguageID=ENA refers to an invalid sub element Filter.
: Element Info with Identity DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA refers to an invalid sub element Filter.
I then exported the MP and manually deleted the Override but when I try to import it I get the same error.
I have also checked a couple of other unsealed MP and some are also affected.
I have gone through the MP XML can find no matches for any of the references. Is there a way (powershell or SQL query) where i can identify what these references are or how I should proceed to troubleshoot this issue?
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Hi Yan,
That was my understanding about the error also but there are no entries for:
ef78d342-5a82-d629-224d-2e476003f6e1
a27e1d14-8ad4-56fb-da46-0c0994054e92
06522f67-c195-2dfa-c310-a0134b961fc4
in the management pack at all.
What also is curious is that the errors refer to "LanguageID=ENA"
but the only language code present inside the management pack is ENU.
The fact that there is no ENA language pack and that there are no references matched leads me to believe
that this issue is not due to this MP its references in another.
</LanguagePack>
<LanguagePack ID="ENU" IsDefault="false">
<DisplayStrings>
There are also about 14 reference management packs this MP uses and those MP would also have a handful each which makes it difficult to troubleshoot.
Unfortunately deleting the MP isn't an option as there is a significant amount of configuration saved in it.
Any ideas on how I could identify theses references?
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Error message when deleting downloaded video on No...

Hi,
I have recently bought a Nokia 6730i and have tried to upgrade the Ovi Maps but do not have enough internal memory. I have therefore tried to delete videos downloaded from the internet.
I have successfully managed this apart from one last file which when I try to delete I get the error message "General: Already In Use".
Please help

Received response from SAP support partner:
Please verify first if the issue is caused by badi implementation
of ORDER_SAVE badi. Please check method prepare and check_before_save.
Maybe inside your implementation the function crm_order_read is called
but that is not possible in case of deleting a document as document is
not available anymore.
If that doesn't work try this one:
Please check to see if you have a badi ORDER_SAVE method
CHANGE_BEFORE_UPDATE. Please deactiviate the ORDER_SAVE Badi and retestthe deletion.
This is how we resovled our issue - hope this helps someone else:
Check using T Code: SE80 to look for a BADI implementation which used BADI: ORDER_SAVE:
SE80-> Package: Z* (look for custom packages) -> Look under enhancements for any BADI Implementations which have used ORDER_SAVE (double click implementation and in the right pane look under Definition name).
Click 'Change' and deactivate this implementaiton. Now try to delete the CRM transaction. The error msg should not pop up now. Once deletion is completed reactivate this implementation.
This is just a work around. The problem lies in the code and the code within the implementation should be debugged and fixed so that this error message does not come up again.

Runtime error: DBIF_RSQL_SQL_ERROR -- when deleting infocube in BWPRD

Dear readers,
When i try to delete the infocube 0IC_C03 from bwprd it gives this error --> Runtime error: DBIF_RSQL_SQL_ERROR ...
Kindly advise.

hii
Check the authorization of deletion of cube at BWP
Also chk whether is there any other info provider which is related to 0IC_C03 or used as a source for other Info provider or multi provider.
Check for data availability before deleting Cube.If yes, then delete data first.
Thanks
Neha

Error message when deleting emails

When I get regular emails from friends and try to delete them after reading, I get the following error message. "The message " what ever the subject is" could not be moved to mailbox trash- Compte POP.
The operation couldn't be complete, file already exist.
The email remains in my Inbox but in the trash, the sender and subject is also there. When I open the trashed email, it is advertising.
I can delete the same email again from the inbox, but never deletes and this keeps doubling up in the trash, with more advertising.
Can someone guide me through to fix this problem.
Thanks
yvon
[email protected]

I am having a similar problem-here is the message i get, but the same thin happens as does to CBXSudbury:
/Users/jonathan/Desktop/ErrorMessage.png

Error message when deleting page from pdf

Each time I try to delete a page from my pdf, I get the error message "One or more pages are in use and cannot be deleted." What does this mean? The pdf is only open in Acrobat.

This error happens to me occasionally and I have never been able to determine why. Sometimes saving and reopening the file does help, but it doesn't seem to be related to email attachments. Sometimes switching from the Page navigation bar to the Page Toolbar or vice versa helps.

In VL02N, getting runtime error "dynpro_msg_in_help" when deleting outbound delivery in production

Hello SD members,
I have an issue in which while executing VL02N and trying to delete the outbound delivery getting runtime error "dynpro_msg_in_help" in production system.
Kindly suggest how to solve this...
Regards
Venkat

Hi Venkata Pradeep,
Can you please proivde more details about an error to understand the issue.
Regards,
Pravin

Has anyone ever encountered a "shockwave player error" window when deleting cookies in Safari preferences under privacy?

This window appears multiple times whenever I try to delete cookies. This afternoon, on the amazon.com site, the window kept opening and would not allow me to do anything else. I had to shut down my iMac and restart several times before I could get it working again. I have had this problem for a couple of years now(even when I was running previous operating systems). What is the deal here, and can it be fixed?

I was having the same problem after updating to the Safari 5.1.2 and noticed, also, that the cookies wren't really clearing... after opening preferences again (after clearing them), there would be a few that would be added back.
I think it's all related to a cookie issue that started with the safari update.
I went back to Safari 5.05 using Pacifier as it wouldn't install under Leopard 10.6.8 which I am running.

Error 00336 when deleting

Similar Messages

Maybe you are looking for