ERROR 00604

I wrote oracle procedure in which I am using 2 cursor.
When I execute this procedure I got following error.
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 1400 bytes of shared memory
("shared
pool","select ts#,file#,block#,nvl(...","sql area","kafco :
qkacol")
If anyone knows the solution of this problem, pl. reply
Thanks

Hi ;
Please follow below and see its helpful:
ORA-040310 Unable To Allocate XXXX Bytes Of Memory [ID 1061139.6]
Getting ORA-04031: unable to allocate 86448 bytes of shared memory [ID 307608.1]
For can get more details about ORA-04031 check below
Diagnosing and Resolving Error ORA-04031 [ID 146599.1]
OERR: ORA 4031 "unable to allocate %s bytes of shared memory ("%s","%s","%s")" [ID 19837.1]
OERR: ORA 4031 "unable to allocate %s bytes of shared memory ("%s","%s","%s")" [ID 19837.1]
ORA-040310 Unable To Allocate XXXX Bytes Of Memory [ID 1061139.6]
Regard
Helios

Similar Messages

DBCA GUI - Create Custom DB error 00604 and 04031

Hi,
there is a new installed 11g on Fedora16 64bit and I want to install the frist database.
At the progress level "Adding Oracle Multimedia" the dbca-GUI shows the error:
ERROR at line 1: (the same is shown in interMedia.log)
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 264 bytes of shared memory ("shared pool","select col#, grantee#, privi.","KGLH0^59e0ed83","kglob")
ORA-06512: at "SYS.DBMS_JAVA", line 655
ORA-06512: at line 1
Is this a known problem?
I have installed ora11g in order to:
http://www.oracle-base.com/articles/11g/oracle-db-11gr2-installation-on-fedora-16.php
Thanks for hints.

Hi ;
Please follow below and see its helpful:
ORA-040310 Unable To Allocate XXXX Bytes Of Memory [ID 1061139.6]
Getting ORA-04031: unable to allocate 86448 bytes of shared memory [ID 307608.1]
For can get more details about ORA-04031 check below
Diagnosing and Resolving Error ORA-04031 [ID 146599.1]
OERR: ORA 4031 "unable to allocate %s bytes of shared memory ("%s","%s","%s")" [ID 19837.1]
OERR: ORA 4031 "unable to allocate %s bytes of shared memory ("%s","%s","%s")" [ID 19837.1]
ORA-040310 Unable To Allocate XXXX Bytes Of Memory [ID 1061139.6]
Regard
Helios

I just bought lightroom 5 but the link throws an error "00604" please help

@

"Sorry,
a problem has occurred with your download. 00604
If you have any questions, please contact Digital River Customer Service at [email protected]"
This is what i get when i pressed the link provided in the email sent to me post purchase of lightroom.

Help needed to understand scheduling feature

hello:
I am trying to schedule workbooks...I followed following steps...
1. logged in as a user with administrative privlages and ran the batchuser.sql script
2. specified a scheduled workbook results schema to own the scheduled workbook results tables...(the schema i specified was an existing user of database)
3. specified the owner of EUL
4. looged in to Disco Admin and gave the privlages to the enduser
5 logged in to DB as Admin and granted v$parameter privlages
then i log in to disco desktop with the user i specified in batchuser script and open a workbook
when i schedule it i get the error
Database Error -00604: Error occurred at recursive SQL level 1
ORA-01653: unable to extend table sys.IDL_UB2$ by 128 in tablespace SYSTEM
whats going on can anybody help me please
thanks
waqas

Hi
It is possible that you have set the default tablespace for the batch user the system tablespace. This is a mistake, use the users tablespace for example.
Ott Karesz
http://www.trendo-kft.hu

Ora-00604 error and ora 01000 error while report generation.

hi all,
I am trying to generate the multiple reports of same template through a program.
While this job is running, i get the following error at the BIP console and the reports don't get generated.
[101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
Kindly help.
Thanks.

Lots of resources with a simple search to see what this is about, for example:
http://www.orafaq.com/wiki/ORA-01000
ORA-01000:     maximum open cursors exceeded
Cause:     A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
Action:     Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
open_cursors parameter
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
Oracle support note:
OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1)

Ora-00604,ora-01422 error while dropping the table

Hi gurus,
I am using Oracle 10g R2 on windows 2000 platform,while dropping the table the following error occured.
ORA-00604 : error occurred at recursive sql level 1.
ORA-01422: exact fetch returns more than requested number of rows.
Need urgent help.
Thanks in advance

Is there an AFTER EVENT trigger defined on this database? Can you check that?
Secondly, was this database migrated from earlier version? I remember having seen this problem on 9i (it was 9.2.0.1 or 9.2.0.2; I can't recall exactly).

PL/SQL-Error: ORA-00604 - ORA-01422 makes no sense. Any Idea anyone ?

Problem:
No matter if creating new or recompiling old procedures
(that had been compiled successfully lon ago),
I always receive the very same error message:
ORA-00604: ...recursive SQL level 1
ORA-01422: exact fetch returns more than requested number of rows
ORA-at line 5 (mouse cursor blinks at teh first line of code...)
It is the same with PLEdit, HORA and SQL*PLUS:
even the most simple procedures are not compiled
Hints: I encounter this problem since I installed Forms 6i.
I am using database 8.1.7 on Redhat Linux (as a server),
and working on a W2K client.
Any idea anyone ?
ThanX in advance !

Sorry, I found my error : Trigger on Database
Maybe others are interested too:
Be careful when using triggers "on schema" or "on database",
because, as I have found, the error message doesn4t say that.
I had a few such triggers for logging purposes.
After I disabled my database triggers, I could continue compiling.
Bye, Jan.

ORA-00604: error occurred at recursive SQL level 1 ORA-01882: timezone

Hi
I'm trying to config my base_domain for SOA11g but i'm getting the following error when connecting to my Oracle XE DB to configure SOA,
please help thanks
Software installed
OS: Windows 7 64bit
DB: Oracle XE 10g
Oracle SOA 11.1.1.4.0
Oracle RCU 11.1.1.4.0
Oracle wls1034_generic
Error Detials
Component Schema=SOA Infrastructure
Driver=oracle.jdbc.xa.client.OracleXADataSource
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_SOAINFRA
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='SOAINFRA' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=User Messaging Service
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_ORASDPM
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='ORASDPM' and version='11.1.1.2.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OWSM MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where
owner=(select user from dual) and mr_type='MDS' and
version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=SOA MDS Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@127.0.0.1:1521/XE
User=DEV_MDS
Password=********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='MDS' and version='11.1.1.4.0'
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
CFGFWK-60850: Test Failed!
Component Schema=OSB JMS Reporting Provider
Driver=org.apache.derby.jdbc.ClientDriver
URL=jdbc:derby://127.0.0.1:1521/XE;create=true;ServerName=127.0.0.1;databaseName=XE
User=DEV_SOAINFRA
Password=********
SQL Test=SELECT 1 FROM SYS.SYSTABLES
Insufficient data while reading from the network - expected a minimum of 6 bytes and received only 0 bytes. The connection has been terminated.
CFGFWK-60850: Test Failed!

Hi,
Please check the timezone set in your server where Weblogic is installed. Also ensure the timezone on which your weblogic is running, the same is present in in database by querying V$TIMEZONE_NAMES table. If it is not present then please change the timezone of the server. then try to execute the steps what you are doing, it will not throw any error.
if this helps please mark.
Thanks,
Kishore

ORA-00604: error occurred at recursive SQL level 1

Hi,
i have a view as source (DB2)
Target table in Oracle with the same structure
when i view data from the view all the records are listed.
after mapping the source and target source gets fail while debuging (test data)
and also while deploying the mapping i get the following error.
Anyone knows about the following errors
ACBLODS_MAP
Create
Warning
ORA-06550: line 0, column 0:
ORA-04052: error occurred when looking up remote object [email protected]@DB2_KAPIL_LOCATION
ORA-00604: error occurred at recursive SQL level 1
ORA-28500: connection from ORACLE to a non-Oracle system returned this
please someone help me to solve this
thanks in advance
regards
raja

I had a simular problem with progress. If the progress table had to many columns
OWB was failing. The problem was the ODBC driver used to make a connection to PROGRESS.

ORA-00604: error occurred at recursive SQL level 1 (Call to a Oracle View)

I have created a view that refers to a package function within the sql select.
Like
E.x
CREATE OR REPLACE VIEW VW_TAX
as select
test_pkg.fn_get_gl_value(acct_id) desired_col1,
test_pkg.fn_get_gl_desc_value(acct_id) desired_col2
From tables a, b
a.col= b.col
The sample function( fn_get_gl_value) is embedded into a package (test_pkg).
Function fn_get_gl_value:
It earlier referred to table A1, B1, C1 and this query took really long, Therefore I used object type tables and stored the values required once within the package when it is invoked. Later I used the Tables A1, B1 and C1(table Cast from the type Table Loaded in Package Memory)
The query was fast and fine, but now when I try to re-use the view
select * from VW_TAX
where acct_id = '02846'
It fails with this message
09:32:35 Error: ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
Note: The database is Oracle8i Enterprise Edition Release 8.1.7.4.0.
Maximum cursors database is 500
Please let me know if there is any known solution,
Appreciate all your help
Thanks
RP

Seems like your OPEN_CURSORS init.ora parameter is set too low.
See Metalink Note:1012266.6 for details.
   ORA-01000: "maximum open cursors exceeded"
        Cause: A host language program attempted to open too many cursors.
               The initialization parameter OPEN_CURSORS determines the
               maximum number of cursors per user.
       Action: Modify the program to use fewer cursors. If this error occurs
               often, shut down Oracle, increase the value of OPEN_CURSORS,
               and then restart Oracle.

ORA-00604: error occurred at recursive SQL level

I only have 2 users and approx 9 schemas.
Why is this complaining about maximum cursors??
Error message:
ORA-00604: error occurred at recursive SQL level
ORA-01000: maximum open cursors exceeded
ORA-0064 error occurred at recursive SQL level
Cause:
An error occurred at recursive SQl level
(a statement applying to internal dictionary tables)
>>
Created 2 users
1) boundaries (User)
has a couple of schema.
National, provincial, district, village
I have set-up the Primary & Foreign keys.
Only 1 table has 1 row of data
2) Projects (User)
Set up one table - Program
Program has a Primary Key.
Foreign key is linked to (boundaries) national PK
The problem occured when I entered data into boundaries.national

Clive_S wrote:
OS: Windows Server 2008 standard - 64 bit.
Select * from v$version
Oracle Database 11g release 11.1.0.7.0 - 64 bit
PL/SQL release 11.1.0.7.0 - production core 11.1.0.7.0
Production TNS for 64-bit windows: 11.1.0.7.0
Production NLSRTL for 64-bit windows: 11.1.0.7.0
I am trying to replicate in Oracle what I would do in SQL Server. There's your first mistake. There are too many differences. My first programming language was COBOL, but I don't write other languages as if they were COBOL.
I cannot attach an image of the users & tablespace, to illustrate.Another reason to work in sqlplus.
>
I created 2 User = Boundaries and Project
I created several schemas (tables)No, you created 2 schemas. One user = one schema = one user.
A schema is not a table and a table is not a schema. A schema is a collection of objects, which can include multiple tables but only those owned by one username.
>
Boundaries (user)
Tables:
Country
Province
District
Village
Projects (user)
Tables:
Program
Project.Program has a FK = Country that is linked to Boundaries.Country
I need to create several scemas (databases):Another difference. a schema is not a database, though the sql server concept of a database is somewhat analogous to an oracle schema.
Boundaries, Project, Assets.
There are foreign keys linking the various schemas.FKs link tables not schemas.
Edited by: EdStevens on Feb 26, 2010 10:30 AM

ORA-00604: error occurred at recursive SQL level 1 and ORA-30036:

Hi Gurus,
I am trying to shrink the table segment along with indexes.
I am using
alter table OWNER.TABLE shrink space cascade; syntax but after 1 hr i got the following error.
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-30036: unable to extend segment by 4 in undo tablespace 'UNDOTBS01'
UNDO tablespace has sufficient space and undo_retention is 6Hrs. What could be the problem ?
Or do i need to use
alter table OWNER.TABLE shrink space; only ?
Thanks & Regards

Hi,
I am doing this in testing enviornment and before this activity added 4g space to existing 50GB undo tablespace.
No jobs are running in testing environment and the shrinking on table is of 12GB. I cann't import/export and truncate or move to different tablespaces as this has oracle advanced queue and chances are more to corrupt queues.
Thanks

Ora-00604:error occurred at recursive SQL level 1 and Ora-04023

hi all
i am using oracle linux 5.5 and oracle Database 11g R2 while shutingdown the database i am getting
the following errors.
SQL> shutdown immediate;
Ora-00604:error occurred at recursive SQL level 1
Ora-04023: object select count(*) from reg$SQL>plz can anyone help me out?

Couple of questions related to this issue:
1.Is there anything in alert log. Post last 50 lines from alert log.
2.Is there any trace / log generated by Oracle ?
3.What is Memory_Target parameter value ?
4.What is value of statistics_level parameter ?
5.Did you perform any failed upgradation ?
6.Are there any invalid objects in database ?
Generally ORA-00604 is related to insufficient size of shared pool. Now, i am googling how to get a proper value of shared pool size ? I got that there is a view v$shared_pool_advice which will tell me the answer of this question. Ok, it means now question is how do i get the proper value of shared pool from v$shared_pool_advice; i mean how do i interpret this v$shared_pool_advice view ?
No problem docs are there to answer this question : (How i got this link ? Open a new page---http://tahiti.oracle.com---selected 11.2 docs--in the left hand sided there is a search text box i entered v$shared_pool_advice and i got couple of links)
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/dynviews_3037.htm#REFRN30239
I will read these links and now i will query this and DBA_HIST_SHARED_POOL_ADVICE views, interpret the values. Ok, but what about my original question i.e. ORA-00604 and 4023 ? If i am at this stage, understood all the values, it means now i can understand the meaning / sense of resizing of shared pool.
ALTER SYSTEM SET statistics_level=TYPICAL SCOPE=SPFILE;
You can monitor V$SGA_RESIZE_OPS to identify the range of values that Oracle is automatically resizing the DB_CACHE_SIZE and SHARED_POOL_SIZE components to. Then, pick an appropriate minimum value based on the range. There's no "magic formula". But V$SGA_RESIZE_OPS shows the sizes that Oracle has been automatically been resizing the SGA components to. The Buffer Cache Advisory section of the AWR report or V$DB_CACHE_ADVICE, V$SHARED_POOL_ADVICE, V$SGA_TARGET_ADVICE and DBA_HIST_SGA_TARGET_ADVICE are views that provide advisory information as well. Hemant @ SGA_MAX_SIZE and SGA_TARGET how to set minimum for pools
So, these are the baby steps if i ever gets ORA-00604 and ORA-04023 on my test database. Do all these and feel free to post the next doubt, i am sure you will get the correct answer.
Regards
Girish Sharma

ORA-00604:error occurred at recursive SQL level1 ORA-01000:maximum open cur

Dear Experts,
I got Error During WebLoad Testing.
Please give me solution.
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-01000: maximum open cursors exceeded

It depends on how may cursors are used in your program and the parameter value for OPEN_CURSORS. If it is not possible to reduce the number cursors used in the program increase the OPEN_CURSORS value.
regards

Ora-00604 error while taking tkprof of a trace file

Sorry i am giving the full erro but omitting exact table names
Hi ,
I have an error while taking tkprof of a trace file.
I gave the following command ---
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela explain= /
error is --
Error in create table of EXPLAIN PLAN table : unix_session_user.prof$paln_table
ORA-00604: error occurred at recursive SQL level 1
ORA-20001: Step-6:DDL
Event Security. You are not permitted to perform the requested structural
changes to PROF (TABLE)
Event triggered : CREATE
ora_login_user
(session_user) : unix_session_user(dummy)
Search : select count(*) from
tabl(dummy table name) where obj_name like '%\%%' escape '\' and obj_type =
'TABLE' and obj_type = 'USER' and ( event_CREATE = 'Y' or status =
'Override')
ORA-06512: at line 162
ORA-06510: PL/SQL: unhandled
user-defined exception
EXPLAIN PLAN option disabled.
i searched for the error and in oracle forum i found a solution .. http://forums.oracle.com/forums/thread.jspa?threadID=844287&tstart=0
but after giving the table option it is giving the same error
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=old_schema.plan_table explain= /
it again gave the same error.
In both two cases it gives elapsed time results,library cache missing etc but before giving this it throws ORA-00604 error as stated above
then i again correct the tkprof statement ..
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=new_schema.plan_table explain= /
say this schema name here i used is dummy schema name.
My question is did this error came as we had not sufficient previlages in the old_schema but that previleges we have in new_schema?
My databse version is 9.2.0.4.0
Thanks in advance
Edited by: bp on Feb 3, 2009 11:36 PM
Edited by: bp on Feb 3, 2009 11:40 PM

Please post here full error message, there should be lines with ORA-00604 and then some other ORA as well.
And are there any trace files generated during this error?
And as You can see from error description, probably You will have to contact with Oracle support in order to solve this case:
oerr ora 00604
00604, 00000, "error occurred at recursive SQL level %s"
// *Cause: An error occurred while processing a recursive SQL statement
// (a statement applying to internal dictionary tables).
// *Action: If the situation described in the next error on the stack
// can be corrected, do so; otherwise contact Oracle Support.

ERROR 00604

Similar Messages

Maybe you are looking for