Error 04031 while using microsoft transaction server.........

hi,
im using microsoft transaction server & oracle server (version7) in my project. im getting one error ie.,
[Microsoft][ODBC driver for Oracle][Oracle]ORA-04031: unable to allocate 250016 bytes of shared memory ("unknown object","session heap","bind var buf")
if i remove my component from MTS, this error does't come.....
i have enough memory in my server. can any one tell what is the problem.......
thanks
siv
null

hi philip,
if i run out of transaction context, my MTS object is working properly... But at the same time , for each database communication, MTS is creating one '.trc' file in system32 directory which contains the text as
135310.388:459.459.1:
ORACLE XA: Version 7.3.4.0.0. RM name = 'Oracle_XA'.
135310.388:459.459.1:
xaoend: XA_RBROLLBACK; upisdt rtn ORA-23.
135310.388:459.459.1:
ORA-00023: session references process's private memory; cannot detach session
do u have any idea what is this..........
thanks
snethil

Similar Messages

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

How to Uninstall oracle services for microsoft transaction server 64 bit

Dear All ,
I would like to know how to Uninstall only oracle services for microsoft transaction server from 11G installtion. I was trying to use "deinstall.bat" but which removes everything from the system. When i use "Oracle Universal Installer" but it doesn't let me do it. I am using Oracle 11G with patch 8 on Windows server 2008.
Any replies are highly appreciated.
Thanks

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Using Microsoft Exchange Server in SOA Suite

Hi Gurus,
I want to use Microsoft Exchange Server for sending email notifications in SOA Suite.
I tried connecting to my company( Exchange Server) SMTP name and port no but its failing with all options ( SSL, TSL , NONE).I even tested with OSB, adding SMTP server and sending mail using Business Service but it's failing
I have tested with Apache James and Gmail as email server and it works fine,but problem comes when in want to configure it with company Exchange Server
Did any one have configured/tried connecting to Microsoft Exchange Server using SOA Suite. Please provide your inputs.
Socket Excpetion while sending emails in 11g
says Oracle UMS does not works with Microsoft Exchange Server and we need to replace some jars.
Please suggest !!
Regards,
Abhinav Gupta

Hi Neeraj,
for OutgoingMailServerSecurity : TLS
*******error*****
******** in Email Driver Logs *********
javax.mail.MessagingException: Can't send command to SMTP host;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.mail.smtp.SMTPTransport.sendCommand(SMTPTransport.java:1564)
at com.sun.mail.smtp.SMTPTransport.sendCommand(SMTPTransport.java:1551)
at com.sun.mail.smtp.SMTPTransport.ehlo(SMTPTransport.java:935)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:426)
at javax.mail.Service.connect(Service.java:310)
at javax.mail.Service.connect(Service.java:169)
at javax.mail.Service.connect(Service.java:118)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:780)
at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
*****IN console Logs *******
Jun 25, 2012 3:45:36 PM IST> <Error> <oracle.soa.services.notification> <BEA-00
0000> <<.> Error status received from UMS.
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : javax.mail.MessagingException: Can't send command to S
MTP host;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorExc
eption: PKIX path building failed: sun.security.provider.certpath.SunCertPathBui
lderException: unable to find valid certification path to requested target,
Addressed to : EMAIL:abhinav.gupta@*********.com,
UMS Driver : Farm_base_domain/base_domain/AdminServer/usermessagingdriv
er-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : 23239c4f0ac0064b017335c74f86a8e9,
Gateway message Id : ****.outlook.com:[email protected]@*******.com,
Status Received at : Mon Jun 25 15:45:34 IST 2012.
Check status details and fix the underlying reason, which caused error.
>
********error *******
for OutgoingMailServerSecurity : NONE
*******error*****
******** in Email Driver Logs *********
javax.mail.MessagingException: [EOF]
at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:1481)
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1512)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:1054)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:634)
at oracle.sdpinternal.messaging.driver.email.EmailDriver.send(EmailDriver.java:781)
at oracle.sdpinternal.messaging.driver.email.EmailManagedConnection.send(EmailManagedConnection.java:50)
at oracle.sdpinternal.messaging.driver.DriverConnectionImpl.send(DriverConnectionImpl.java:41)
at oracle.sdpinternal.messaging.dispatcher.DriverDispatcherBean.onMessage(DriverDispatcherBean.java:296)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
*****IN console Logs *******
<Jun 25, 2012 3:57:10 PM IST> <Error> <oracle.soa.services.notification> <BEA-00
0000> <<.> Error status received from UMS.
Status detail :
Status type : DELIVERY_TO_GATEWAY:FAILURE,
Status Content : javax.mail.MessagingException: [EOF],
Addressed to : EMAIL:abhinav.gupta@*****.com,
UMS Driver : Farm_base_domain/base_domain/AdminServer/usermessagingdriv
er-email:oracle_sdpmessagingdriver_email#Email-Driver,
UMS Message Id : 232e2ab70ac0064b01cd6ee979e494ed,
Gateway message Id : ****.outlook.com:[email protected].******.com,
Status Received at : Mon Jun 25 15:57:04 IST 2012.
Check status details and fix the underlying reason, which caused error.
*******error*****
Please suggest me what to do !! I am stuck with it for last two days !!

An error occurred while creating a Page Server subprocess.

I am using XI R2 SP5 on solaris.
When we try to view any report on demand or schedule any report that has a parameter, the following error comes back:
An error occurred while creating a Page Server subprocess.
I have tried restarting the services. I have tried creating a new page server. It behaves the same way. In other online forms, I've seen with this error message, people have talked about fixing it by installing SP2 or by uninstalling and reinstalling everything. We're at SP5, so we should have anything that was fixed at SP2. An uninstall and then reinstall would be a nightmare given the amount of use on this system.
Can anyone recommend anything at all? I'm about to have our unix admins reboot the server, but that is really nothing more than a stab in the dark. I saw someone else in an online posting claim that a reboot fixed the problem, but I've only seen that once.

checked this SAP Note?
1204013 - Error: "The Page Server is unable to create a child process" when viewing a Crystal report in InfoView on Solaris
Symptom
When trying to view a Crystal report in BusinessObjects XI Release 2 InfoView on Solaris, the following error message appears:
"The Page Server is unable to create a child process"
In the syslogs, you see the following error messages:
"An error occurred while creating a Page Server subprocess."
"The function PEOpenEngineEx failed. Reason: Report engine not opened."
"Internal error for dll procreport."
"Unable to load dll procreport."
"Internal Job Server error."
Cause
The following file in the MainWin registry has become corrupt:
bobje/enterprise115/solaris_sparc/crpe/mw/registry/core_data/servername/.mw/hklm_sunos.bin
This has become corrupt due to the web application server running under a different account than the BusinessObjects Enterprise applications.
Resolution
Restore the hklm_sunos.bin file using a backup of that file. The backup file must be from before the corruption occurred. Also ensure that your web application server and BusinessObjects Applications are running under the same user account.

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

An error occured while sending mail: SMTP server error. The server responded: (null)

I'm getting this set of error messages intermittantly:

An error occured while sending mail: smtp server error
the server responded: (null) contact email admin
for assistance
other message
an error occured while sending mail: smtp server error
the server responded: intermail,
end with quote.quote contact email admin
for assistance

This problem may occur at low-use times when Messaging is installed with the
Trend virus protection software on the same system.

Change the version of the Trend software from 3.0 to the older 2.62 version.

It's possible that your provider has made a change.
I think STARTTLS usually is used with port 587, instead of the standard SSL port 465.
Could you look up your provider's current SMTP settings to see whether your "Outgoing Server" settings need to be updated? If it's difficult to translate between your provider's help page and Thunderbird's dialog controls, you could provide a link to your provider's help page.

A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred

Hi
i am getting these errors in sharepoint server event viewer, and when i see the sql server the log files disk is full memory only some mbs left out of 1 TB
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Server Search
Date: 7/12/2014 9:56:04 PM
Event ID: 57
Task Category: Search service
Level: Warning
Keywords:
User: XYZ\svc-mc-sps3eServsear
Computer: SPFIND01.xyz.gov.local
Description:
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 1205 occurred 1 time(s) Description: Transaction (Process ID 193) was deadlocked on lock
resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Context: Application 'XYZSP_SearchApp'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-SharePoint Products-SharePoint Server Search" Guid="{C8263AFE-83A5-448C-878C-1E5F5D1C4252}" />
 <EventID>57</EventID>
 <Version>14</Version>
 <Level>3</Level>
 <Task>136</Task>
 <Opcode>0</Opcode>
 <Keywords>0x4000000000000000</Keywords>
 <TimeCreated SystemTime="2014-07-12T18:56:04.665684900Z" />
 <EventRecordID>225666</EventRecordID>
 <Correlation />
 <Execution ProcessID="3408" ThreadID="2932" />
 <Channel>Application</Channel>
 <Computer>SPFIND01.xyz.gov.local</Computer>
 <Security UserID="S-1-5-21-1537596049-1164153464-4201862467-47315" />
</System>
<EventData>
 <Data Name="string0">Microsoft SQL Server Native Client 10.0</Data>
 <Data Name="string1">1205</Data>
 <Data Name="string2">1</Data>
 <Data Name="string3">Transaction (Process ID 193) was deadlocked on lock resources with another process and has been chosen as the deadlock
victim. Rerun the transaction.</Data>
 <Data Name="string4">
Context: Application 'XYZSP_SearchApp'</Data>
</EventData>
</Event>
A database error occurred. Source: Microsoft SQL Server Native Client 10.0 Code: 9002 occurred 1 time(s) Description: The transaction log for database 'tempdb' is full due to 'ACTIVE_TRANSACTION'.
Context: Application 'XYZSP_SearchApp'
adil

If you've run out of disk space for your SQL databases then of course you'll get errors. Fix SQL then look to see if you're still getting errors.

Understanding on Oracle services for Microsoft Transaction Server frm dba point of view

Hi ALL,
i read : -> https://docs.oracle.com/database/121/NTMTS/recovery.htm#NTMTS003
Need help to further confirm my understanding on what i read.
I am coming from the DBA angle... .
the functionality of the Microsoft Transaction server is integrated within the operating system as a COM+ server and as a .NET server, "
can i say these is the application servers ?
and the Microsoft Transaction distributed co -ordinator components is part of it.
Question, i don't install the Oracle Recovery Services on the above system right?
Question 2, as a dba, my only concern is to make sure the Oracle Services for Microsoft Transaction Server is installed. Is this correct ?
plus making sure to create the OraMTS administrator to run the recovery job to check for in-doubt transaction.
Question 3:
is this Oracle services for Microsoft Transaction Server used only when an application useses multiple databases in an env?
Can i say that when there is no user MTSSYS in my database, Oracle services for MTS is not used?
The reason why i ask is i am upgrading/ migrating my database and this database don't work with more then 1 database or the application does not work with more then 1 databases.
I ask the apps team all they say is that they are also not too sure. Thus need help/ advice.

Daniel,
In pre-8.1.7.4.0 beta implementations, your application server e.g. IIS or MTX.EXE hosts MTS transactional components. When such components acquire OLEDB or ODBC connections to Oracle and external service setup for that database i.e. OracleMTSService<id> joins the MTS transaction on behalf of the Oracle database which quite often runs on a non-Windows platform e.g. Solaris. We restrict each database to have one and only such service. This brings in scalability and availability issues. In 8.1.7.4.0 we have embedded the transaction join and commit logic in the clientside dll. There is no OracleMTSService<id> for a given database. The only service needed is a recovery service one per Windows machine on which Oracle Svcs For MTS is installed. This service is automatically created on installation of the product and doesn't connect to the databases. Instead the involved databases connect to the service via HTTP to resolve any MTS-related transactions that are in-doubt.

Microsoft Transaction Server and Oracle 7.3.4/8.0.5

Hello all,
I have been working with VB COM objects in MTS and Oracle 7.3.4/8.0.5 for most of this year (2000), and I have things working with relative smoothness. However, I am having severe performance issues.
I have used the white paper Using Oracle with Microsoft Transaction Server and COM+ (http://support.microsoft.com/support/complus/mtsandoracle.asp), which got things rolling, but there is little/no information on how to gain performance. I am using the same DLLs against SQL Server databases, and the performance is very noticeably better.
Has anyone done any performance tuning in this type of scenario? Any tips for me?
null

Dyna, I have yet to hear of someone that has been able to successfully replicate data from Oracle 8i to 7.3.4 using Oracle Replication Services. I would sugest that you take a look at third-party solutions like DataMirror Transformation Server to help you out with this. More information is available on our web-site (www.datamirror.com) if you wish to investigate this further.
John Vandermay,
DataMirror Corporation.

An Error Occurred While Communicating with Web Server

We are getting an error message ("An Error Occurred While Communicating with Web Server") when sending data from BPC Excel. Any one konws why it is coming.
We are using ASP.NET version 2.0.50727 in ISS Server

Hi,
This kind of error happens when EVDRE status is not Ok.
Even if EVDRE status is OK please make the relevant changes in expansion range--> MemberSet values.
Hope it helps
Raman
Edited by: Radharaman Singh Rajkumar on Jun 29, 2010 5:25 PM

Microsoft Transaction Server

I'd like information regarding the implementation of Microsoft
Transaction Server and Forte on the same server. Also, any info about
problems encountered would be appreciated.
Thanks
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

For a general description see here:
http://searchwinit.techtarget.com/sDefinition/0,,sid1_gci213747,00.html
And Oracle's part is:
ORACLE SERVICE FOR MICROSOFT TRANSACTION SERVER (ORAMTS)
The following information applies to the Oracle Service for Microsoft
Transaction Server (ORAMTS) that interfaces with Oracle through its native
API, Oracle Call Interface (OCI), and also interfaces with the Microsoft
Transaction Server (MTS). ORAMTS is a COM-based transaction processing
service used to manage transactional COM components registered under
Microsoft Transaction Server (MTS) interacting with the Oracle database.
ORAMTS works with any of the following programmatic interfaces:
1. Oracle ODBC Driver
2. Oracle Provider for OLE DB
3. Oracle Objects for OLE (OO4O)
4. Oracle Data Provider for .NET (ODP.NET)
Werner

Cannot connect to an Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service"

Dear All,
I cannot connect to my Exchange account in Outlook 2013 using "Microsoft Exchange Server or Compatible Service".
First I would like to present my network environment, I have 4 physical servers;
The first one is holding the Domain Controller 1, IP@: 192.168.1.10
The second server is holding the additional Domain Controller which it is DC2, IP@: 192.168.1.11
The third server is holding the Exchange 2013 Mailbox, IP@: 192.168.1.15
And the last server is holding the Exchange 2013 CAS-HT, IP@: 192.168.1.16
I am doing the steps below:
1-Creating a new profile in outlook and start configuring the exchange account by entering the IP address of the Exchange-CAS Server, 192.168.1.16
2-entering the account name: [email protected]
3-Go to "More Settings" > "Connection" > "Connect to Microsoft Exchange using HTTP" > and entering the "Exchange Proxy Settings"
4-type the exchange CAS Server URL, https://192.168.1.16
5-Check the "Connect using SSL Only"
6-Authentication Settings: "NTLM Authentication", and pressing Apply
7-When I press the "Check Name" button, a message occurred> "The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action".
8-I go back to the "Exchange Proxy Settings" and I Uncheck the "Connect using SSL Only" and pressing Apply
9-i press the "Check Name" Button, a small window occurred to enter a Username and Password, so I enter the Administrator username and the administrator password and pressing "OK", but nothing is changed, I tried to enter my
username and password in the small window and I still got the same result.
I cannot verify the account name and I cannot complete the process.
I appreciate you kind assistance.

Hi,
To narrow down the cause, I’d like to recommend the following troubleshooting:
1. Try to login the test account through OWA.
2. Check the Autodiscover settings: get-clientaccessserver |fl autodiscoverserviceinternaluri
3. Check the result of directly accessing the following URL:
https://autodiscover.domain.com/autodiscover/autodiscover.xml
Thanks,
Angela
Angela Shi
TechNet Community Support

System error message while using maps check in

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

How to get default values while using the transaction "BP"

Hi Group,
I have a query on how to get default values while using the transaction BP?
The thing is:
when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
how can I achieve this?
So please kindly let me know the procedure to achieve this.
Thanks & Regards,
Vishnu.

Hi,
The events of BDT can be used to default some fields on creating a partner.
For this create a function module for ISDAT. attach that event in BUS7.
In the ISDAT funtion modulethe following code should be used.
For example to set the nationality:
I_BUSDEFAULT-NATIO = 'DE.
CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
EXPORTING
i_busdefault = I_BUSDEFAULT
Regards, Smita.

Error 04031 while using microsoft transaction server.........

Similar Messages

Maybe you are looking for