Error 0x00000133 windows stopped working

This error message keeps cropping up on a daily basis. The laptop mousepad will stop working then will shut down and restart and this error message is displayed saying the laptop has rebooted due to a bugcheck error. I have ran SFC but this found
nothing. How do I find what is making this error happen and how to fix it?
I have tried looking at the memory dump file but this doesn't give me any more info other that the error code.
Please help.

As T.Kujala mentioned, could you share the dump file with us so we can help analysis?
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/en-us/kb/315263#method1
However as you said sometimes we may not able to find useful information from it.
Is there any specific change on your system before the issue occurs? Such as new device installed, driver update, new application etc.
In addition, as it will take some time for such an crash issue, it is more recommended to contact Microsoft online support. Also a quick workaround is to run a system restore or a system repair if there is no much data on your system.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Get error "Firefox has stopped working" under Windows 7

I'm running Firefox 3.6.10 (just upgraded, I was at 3.6.9) and every so often (maybe 1-2 days), Windows 7 decides to crash it with the error "Firefox has stopped working". Firefox itself does not seem to be generating a crash id, which is disappointing since that way it would be reported. I run a LOT of tabs, at the moment I have around 100 open. I notice that the CPU usage seems to get very high (it shows 25% for me, but I have a quad core machine so I guess that is 100% of one CPU) as well as memory (1.5gb). It's almost as though Windows thinks that Firefox has stopped responding because of the high CPU usage and decides to terminate it.
I've seen some posts here reporting similar problems, but no resolutions. I also saw a post elsewhere suggesting disabling throttling in Windows but saw other posts saying that had not solved the problem.
Any suggestions on how to fix or troubleshoot this problem?

I have this problem too. Now i'm using win7 64 bit, i installed the newest firefox 6.0.2 and yahoo messenger 11 -> i got this problem. First time i think this is a firefox's error. I decide to use process hacker (a mini tool to manager running process) to find out what is happening and i found this: the program name "YahooMessger!.exe" run a few second and it calls the firefox crash popup lol. I uninstall the firefox and i see "YahooMessger!.exe" auto run in process hacker! ^^ conclusion: i uninstall Yahoo Messenger 11 and delete two folder of yahoo in my username's document (1 of them have the program "YahooMessger!.exe"), reinstall firefox and get out this problem!
So my question is: what is "YahooMessger!.exe", is it a yahoo's part, is it a spyware or virus? Here is the link of this file, i have archived it with winrar http://www.mediafire.com/?lf8tc9fal5rxlup

10.2.1 error "iTunes has stopped working" Windows 7 with audio CD

Hi! Hoping someone can help me with this one. Just upgraded to 10.2.1.
iTunes opens ok but if I put in an audio CD, I get the windows error "iTunes has stopped working." It checks for help and then it states "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Then it closes.
Any ideas?
Thanks!

Here it is:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron 570
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0028A5A8034DDBA8
Current user is not an administrator.
The current local date and time is 2011-04-07 20:35:42.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4200
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.2.1.1 (x64) is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: TSSTcorp DVD+-RW TS-H653H, Rev D400
Audio CD in drive.
Found 18 songs on CD, playing time 78:37 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:12:47
Track 3, start time 07:55:58
Track 4, start time 11:40:28
Track 5, start time 15:29:22
Track 6, start time 20:37:56
Track 7, start time 25:54:27
Track 8, start time 29:58:64
Track 9, start time 35:45:17
Track 10, start time 40:25:27
Track 11, start time 46:05:25
Track 12, start time 49:56:00
Track 13, start time 53:45:22
Track 14, start time 59:38:65
Track 15, start time 63:30:13
Track 16, start time 67:17:33
Track 17, start time 71:04:38
Track 18, start time 74:46:25
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.

ITunes Match sync stops and gives me a Window error that it stop working. I have Windows 7 64bit. How do it make it sync?

I have signed up on iTunes Match. When I setup my PC iTunes to starts to sync it stop and gives me a Window error that it stop working. I have Windows 7 64bit. How do it make it sync?

Tarantulaman wrote:
i do, but like i said it fell once and since then it hasn't been able to connect to my laptop. it acts like nothing's connected. i believe if i call the company the HDD is from they'll be able to transfer it to a new one but who knows how much they'd charge. looks like i have no choice now.
If it were truly a backup, then the media would play on the laptop as it would be on the laptop.
Sounds like you actually do not have a backup, instead you chose to keep your media on an external drive.
Regardless of where the media is stored, it's always a good idea to have a backup for instances like this.

Error: OUI.exe Stopped Working 11g R2 32-bit Client on Win 7 64-bit

I am receiving an error "oui.exe stopped working" when running setup.exe to install Oracle 11g R2 (win32_11gR2_client.zip for Win 32-bit) client on Windows 7 Enterprise 64-bit. I never even get as far as the Oracle installation dialog box. I am trying to install 11g R2 32-bit because it is my understanding the 64-bit version of Oracle client is not compatible with Toad for Oracle.
I have read numerous posts on the subject and have tried just about everything I can think of to get around the error. When I run the setup.exe -debug I can see that teh files are unzipped and the installer seems to fail when it hit the section where it tries executing java.exe. Once the dialog box appears with the error message, I am not able to get back to the command window to extract the debug results. I can only see it partially in the background behind the dialog box. When I hit cancel to close the error dialog, the debug window also closes, so no way to get the details of the debug results
I am logged into Win 7 as a member of the Adminstrators group and have verified that the Windows User Access Control (UAC) is turned off. I get the erorr message whether I run as Administrator or not. I have unzipped all the files and folders under the \client directory from the zip file to a folder c:\temp\. So the setup.exe and all folders below it are in the c:\temp directory. I did this because one post suggested an issue with long path names or path names with spaces when executing setup.exe.
Seems like it should not be this difficult. I never had issues in the past installing Oracle client on Windows XP Pro. This is my first attempt at installing under Win 7.
Any help or direction would be much appreciated.
Edited by: user10421280 on Nov 21, 2011 1:27 PM

orafad and PavanG,
First let me thank you both for your multiple attempts to help me. I finally figured out what was causing the issue with the Oracle Installer, oui.exe not running properly. Last night I was looking around into the Windows Event Viewer and found an Error entry for oui.exe that pointed to a program directory and .dll in the \\program files\appsense\ directory path. It seems that in addition to the McAfee virus scan, host intrusion, unwanted programs, group policy manager, etc., there is another application installed on the machine that governs what programs can and cannot run. I don't know much about it other than when the program was temporarily suspended, the setup.exe and oui.exe install kicked off fine without the "oui.exe stopped working" error message. It proceeded happily to the Oracle Client installation dialog. All along our IT desktop support was trying to help me with the install and they repeatedly disabled the McAfee programs to no avail, but not the other utilities. It was almost like even they were unaware of this other application running in the background since they never suggested disabling it.
Either way, I'm happy to say that I am now able to successfully launch the Oracle Client installer without issue. I've also learned a little about getting the Oracle 11g Instant client to work with Toad while I worked through the issue with the installer. I could almost get by completely with just using the Instant Client if I didn't have to use SQL*Loader (sqlldr.exe) and tnsping.exe. Any suggestions for getting these two functions to work with the Instant Client would be appreciated. I tried copying the binaries and the message files into the appropriate instant client directories, but windows kept complaining about missing .dll's when I tried executing the commands.
If there is no workaround for getting these functions to work with the Instant Client, and I have to do an Oracle Client install, at least now I can. Do you know if I would need to do the full "Administrator" install to get these functions, or can I do just the "Run Time" install to get sqlldr and tnsping?
Thanks again for your help

HT1926 I am getting an error - iTunes has stopped working.

I am getting an error - iTunes has stopped working.
This is happening in Win 7. It was working till yesterday Please help..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error 'Licensing has stopped working' Acrobat 9 Pro

What is the fix for Error ‘Licensing has stopped working’ Acrobat 9 Pro

win: http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
mac: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

HT2311 I just installed 64 bit iTunes fon my new Dell Latitude PC. Everytime I try to open it I get an error "iTunes has stopped working..."

I just installed 64 bit iTunes on my new Dell Latitude PC. Everytime I try to open it I get an error "iTunes has stopped working..."

I requested this be relocated from iTunes for Mac to iTunes for Windows. You'll get a faster response on the correct forum.

Windows stops working popup

I had bitberry software-freefileviewer downloaded for some time,I uninstalled it to reinstall and insure I had latest version.Now,every time I click on nest to reinstall I get popup windows stopped working.What will fix this? thank you

RanMor,
If possible could you send a screen-shot of the error message box please.
Bob.
Robert Brindle. MCSE, MCSA & MCP/Cisco CCNP & CCNA.

Windows stopped working after 1 month

Windows stopped working. Nothing opens up. I can not go into settings. The apps do not open up. The system restore does not work. It will not allow me to to reset to factory reset. This is horrible. I can go into the desktop screen and Internet thankfully. Only had it for one month. I miss my old Toshiba laptop.

jmedure wrote:
Unfortunatly it gives no errors message. However, I do have her IT people checking. I did valiate FIOS does not block VPN by setting one up for my work and connecting to it. So it seems to be something that maybe her work needs to fix. I did notice her work website can not be accessed either by our home network, but it can from other sources. Makes me wonder if there is something where my FIOS DHCP address matches her work or something weird because everything else works. LOL
Chances are good it's a routing breakdown at this point, if her work hosts the VPN Concentrator within the same datacenter or address space as their website. They could also be on the same machine for all that matters.
Likely, if you run a traceroute from FiOS to the datacenter, and back you'll see where the connectivity may be dying at.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Blue screen, Windows stopped working, BC code 50

I did a clean install of Windows 7 Home Premium 32 bit, on my vista laptop.
I have had two blue screens in the past week, stating windows stopped working here are the details:
BC code - 50
BCp1 - 80024114
BCP2 - 0000000
BCP3 - 9850ED3A
BcP4 - 0000000
OS Version 6_1_71
Service pack 1_0
Product 768_1
Can you help me with where the source of the problem is?

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
We prefer at least 2 DMP files to spot trends and confirm the cause.
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag

PSE 13 solves "Error: Licensing has stopped working" on MAC OS X 10.10.2?

After some years using my reliable PS8 I've got this nasty message and I am unable to work since then.
I've been working on solving the "Error: Licensing has stopped working" on MAC OS X 10.10.2 for a while without success.
Does PSE 13 solves the problem? I just want to be sure that if I buy the new version it is going to work or if I am going to lose another US$ 99 on a piece of software that requires more "MAC OS X" expertise than I have.
Any help, clue or piece of advice is welcome.

Thank you, but it is exactly the paper I've been trying to follow.... I can't go through solution 2 because I got an error when using “sudo python “.
After trying for some days I am thinking about buying the newest version (PSE 13), I just want to be sure I am not going to have the same error.... ;-)

I am trying to snyc my ipod and I keep getting an error: iTunes has stopped working.

I am trying to snyc my ipod and I keep getting an error: iTunes has stopped working. This following are the details of the error:
Problemsignature:
Problem Event Name:           APPCRASH
Application Name:                iTunes.exe
Application Version:             10.4.1.10
Application Timestamp:        4e4e1904
Fault Module Name:             iTunes.dll
Fault Module Version:          10.4.1.10
Fault Module Timestamp:     4e4e18db
Exception Code:                   c0000005
Exception Offset:                 001c5af0
OS Version:                          6.1.7601.2.1.0.768.3
Locale ID:                             1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
The ipod is updated except for the contacts.
Any help is appreciated.
thebiddy52

Maybe:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Error JREW.EXE stopped working while installing oracle 9i on windows vista

Hi,
When installing oracle9i Database on wndows vista premium home edition it gives jrew.exe has stopped working. Can anybody help me to solve this.
Thanks
Sree

Choose a supported configuration. NO Oracle software is supported on any Windows home edition. First supported database version is 10.2.0.3 for Vista.
Werner

I recently installed 7.0.1 on two Windows 7 Enterprise x64 systems. Now everytime I close Firefox I receive an error "Firefox has stopped working" and I have to click close. Works fine on a Windows XP SP3 x86 machine.

"Firefox has stopped working"
"A problem caused the program to stop working correctly. Please close the program."
I tried installing two ways; clean and upgrading from 6.0.2. I receive the same error message upon exit.

I followed the troubleshooting guide for extensions and themes, and still have the issue.
I modify the package to redistribute with SCCM, and I like to modify Firefox manually. This process has worked fine until 7.0 or 7.0.1. I extract the files from firefox setup 7.0.1.exe, then I extract the files from omni.jar, so I can modify settings in firefox.js to remove updates, setting firefox as the default browser, etc.. I run setup.exe and include a setup.ini as part of my installation command line to remove icons.
I tried just extracting .exe, and the files from omin.jar but not modifying anything and left out the .ini file and it still fails to close properly.
Like I said the above process works fine on XP.
If I install 7.0.1 via the download .exe on Win7 Enterprise x64 it works fine. I'm still looking into it.

Error 0x00000133 windows stopped working

Similar Messages

Maybe you are looking for