Error 0x8002006D occurs when trying to burn DL-DVD's

I can't explain it, but whenever I try to burn a Dual Layer DVD, I get that error and it ejects my disk. I've restarted several times, tried different disks, but still the same error. Other than that it works perfectly. What is going on?
error code: 0x8002006D
Mac OS 10.4.10
2.33 ghz core 2 MBP
DVD drive info:
Model: MATSHITADVD-R UJ-857D
Revision: KCVB
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Low Power Polling: Yes

There are CD's that clean lenses. Some people say they actually ruin them. Start with the safe option, Verbatim DL. I have found with many drives, e.g. LaCie (LG) Pioneer, Apple's that the others just are awful (e.g. Fuji and Memorex) - I bet you saved a few skins and are trying Memorex (single layer don't work any better either).
Verbatim.

Similar Messages

  • I am getting error code 0x8002006E when trying to burn a DVD

    Hi, I am running the latest Lion update, on my MB Pro, and keep getting the error code 0x8002006E when trying to burn a DVD. Could this be a dirty lens issue in the drive. I see that many others have had the same problem, but relly cant seem to find anyone that has a solution that works.. Help

    marobinson58 wrote:
    keep getting the error code 0x8002006E when trying to burn a DVD.
    It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
    "The burn failed because of a medium write error."
    Could this be a dirty lens issue in the drive.
    I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

  • TS4522 What is the problem when I get error code 0 when trying to burn a DVD.  It stops around 60-some %.

    I have tried twice to burn a DVD, and both times I get error code 0 at about 60-some % of the transcoding.  I haven't had any trouble burning DVDs before now.

    I had a friend with similar problem, not sure of cause. Happened when sharing to Apple device as well.
    Apple said to delete all files in Render folder. We did not try that as-
    Problem changed slightly for us, in that Share to 'Apple device 720' got to 50% and pretended to have completed its operation, but no file found in Project Share folder.
    We found then, if the timeline clips where highlighted it would share, where previously it had repeatedly failed.
    Hope that helps

  • Formatting write error every time when trying to burn a DVD

    DVD Studio has worked for me in the past, but now every time I try to burn a DVD project, I get this: "Formatting failed - The recording device reported the media error: Write error (0x0C, 0x00)"
    As far as I can tell, I cleared the prefs for DVD Studio, but that didn't help. Does anyone have an idea of what I can do to fix this problem? Thx.

    Hi:
    Wellcome to the forum !
    Probably DVDSP and/or your drive don't like your media. No matter that, me and other found that DVDSP is one of the worst way to burn DVDs.
    Try * Creating Disc Image in DVDSP * and burn it using Disk Utility and/or Toast.
    About your media, you can * USE THIS SITE * as reference.
    Hope that helps !
      Alberto

  • Keep getting error code -50 when trying to burn a disc. how do I solve this?

    Does anyone know how to solve the problem of getting "unknown error" code (-50) when trying to burn a disc? I don't know how this happened

    marobinson58 wrote:
    keep getting the error code 0x8002006E when trying to burn a DVD.
    It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
    "The burn failed because of a medium write error."
    Could this be a dirty lens issue in the drive.
    I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

  • How do I fix the 4900 error I get when trying to burn a cd in itunes?

    how do I fix the 4900 error I get when trying to burn a cd in itunes?

    We are having the same issue.
    Windows 7 x64
    Microsoft Office 2013 (Word)
    Adobe Reader XI (11.0.0)
    Whenever someone tries to embed a PDF file into a Word document, the following error occurs:
    The program used to create this object is AcroExch. That program is either not installed on your computer or it is not responding. To edit this object, install AcroExch or ensure that any dialog boxes in AcroExch are closed.
    I have looked at alot of articles online that say to 'Disable' Protected Mode.  This does not resolve the issue.  This option is not set by default in our environment.
    Do we have any confirmation or information from Adobe on this issue? 

  • I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. Why?

    I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?

    Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.

  • HT201303 An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

    An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

    urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard.  no idea why i messed that up!
    anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work.

  • I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...".  Never did burn the DVD.  Any ideas?

    I get an error when trying to burn a DVD. I have version 7.1.2. "Error rendering/encoding titles...".  Never did burn the DVD.  Any ideas?
    Thanks, Scott

    Hi
    This Q is close to - Something is wrong. What's it ?
    You have to supply much more info to be able to start guessing.
    • What material was used ? Video codec, Audio file format and Photo file format
    • Free space on Start-Up hard disk. How much ?
    • Brand of DVD used ?
    • Type of DVD used ?
    • Burn speed set down or not ?
    • Version of iMovie, iDVD'11 v 7.1.2 (OK), QuickTime and Mac OS ( X.6.8 I read ? )
    And all extra info You can supply - that set's us on track.
    Yours wanting to be of help. Bengt W

  • Why am I getting an unknown error has occurred when trying to download apps

    For the past 12 hours I have been getting a message, 'an error has occurred' when trying to update any existing apps or downloading any new apps. Anybody experiencing the same thing or know what I can do?

    Were you able to find a solution to this issue? I am also getting the 'an error has occurred' message when trying to download or update any apps on my iPhone. Restarted, updated, re-booted, etc etc, nothing has worked.

  • How to fix 'An Unknown error has occurred" when trying to save an  illustrator CS5 doc

    Hi
    I have just upgraded to a new iMac late 2013. After running a migration from my old mac to the new. I now have the following error: "Unknown error has occurred" when trying to save an illustrator CS5 doc.
    How do you  fix 'An Unknown error has occurred" when trying to save?
    All help, most welcome.
    Thanks
    Marty

    Hi
    Thanks for your response. I have reinstalled and used the adobe clean software to remove all adobe software first. still not working. Can you explain in more detail "fix the permissions on your User: Library folders"? I have verified disc perms in Disc Utility.
    Thanks
    M

  • Getting "an unknown error has occurred" when trying to update apps or download books

    I keep getting "an unknown error has occurred" when trying to update apps   Also get same message trying to purchase an iBook

    Same here.
    I did restart the iPad which had no effect. Adding an app through iTunes still worked this morning.

  • After having played back a backup on a Mac under OSX 10.7 containing CS4 following error massage occured when trying to start PS:

    after having played back a backup on a Mac under OSX 10.7 containing CS4 following error massage occured when trying to start PS:
    eroor 150:30
    seems to be related with registration

    By courtesy of R_Kelly:
    The 150:30 error means licensing broke.
    Two ways to fix this: If you are used to the Terminal app, you download the license recovery package and following instructions carefully, you use the python script in the package.  Error "Licensing has stopped working"  | Mac OS
    If for some reason it doesn't, reinstall CS4 from your discs, or download the CS4 installer here.
    http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
    Have your serial number ready.

  • An Active Directory error 0x51 occurred when trying to check the suitability of server

    We have several exchange administrators and two exchange 2010 servers and one exchange 2007 server. I am getting the following error message
    when opening up Exchange Management Console on one of the exchange 2010 server. 
    "An Active Directory error 0x51 occurred when trying to check the suitability of server 'dc101.domain.local'. Error: 'Active directory
    response: The LDAP server is unavailable.' 
    dc101 does not exist anymore. I tried changing the Configuration Domain Controller by manually specify a domain controller but get the exact
    same error message and also gets an empty list when selecting the domain. Other administrators who logs into to the same server do not get this error message. 
    If I open the exchange management console on another exchange server, it works without problem. Is there a setting somewhere I need to change
    to point it to the correct domain controller using power shell?

    I fixed it for myself.
    Organization Configuration->Modify Configuration Domain Controller->select Use a default domain controller
     

  • I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop

    I get an error when trying to burn recover DVDs on a HP pavilion g6-1311AU laptop. I have tried a number of different DVD disks but keep getting the error. I supect that the recovery program is trying to burn at too high a speed as I have had this problem when burn to 16x spped DVDs, but I can't find any way to change the burn speed in the recovery program. Any sugestions would be appreciated?
    Regards, Steve

    Hi
    Please find the link given below might help you to fix the issue note windows vista & 7 troubleshooting are the same.
    Troubleshooting CD or DVD Disc Burning Problems
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

Maybe you are looking for

  • "Disable Check for SQL Express" against SQL Server Agent

    Good afternoon, Seeing as it has been a know issue for many years now[1], is there a reason why Microsoft has yet to include a "Disable Check for SQL Express" override (similar to the Automatic Configuration (& other) monitors) for each of the follow

  • Trying to setup new ipod and get error -9808

    first do i need a new account for new ipod when i have one setup already. i'm trying to run 2 ipods the new one gives me error -9808 in store mode so i can not get new i pod to activate

  • Batch & Material not possible in C.Record

    Hello Friends, We are not able to create a Condition Record with the key combination- Batch & Material. Err: "Object Batch not provided with characteristic "Batch Code". (Note other fields!)". What can be the problem? Regards & Thanks. Edited by: R S

  • Average of the best (8) of most recent 20 events

    Anyone know a formulae approach to determine the average of the best (8) of the most recent (20) events. I can do this manually by sorting the whole table by date, then selecting the most recent (20) events (rows), sorting those by the values in the

  • Need help trying to get my WEP key

    Hi. I bought my wireless router  a wrt54gs used nd i'm trying ot use the wireless for my wi-fi DS.  It says I need a wepkey and I don't know how to get it.