Error 0x80070035 only on one of 20 remote machines, after months of use... strange!

I have been using a Windows 7 Server on my network for Quickbook for 2 years without a hitch. Since the weekend I started getting error code 0x80070035 'network path was not found' for the server only. I can see the server on my mapped network,
I can see my computer from the server, I can open every remote computer on the network except the server. My admin team still can access the Quickbooks Server. I can open the server from every other computer on the network... just not mine.
I have tried system restore, no luck. I've turned off TCP/IPv6 with no success. I've checked for multiple 6to4 adapters, none. Again, my network works perfectly on every remote unit, from all work stations except for me
now connecting to the Quickbooks server.
I'm sure this is a strange occurrence with a simple solution... I just can't figure it out with all the posts I've read.... suggestions?

Hi,
The error code 0x80070035 can be caused by multiple reasons, it would be better to capture a network trace to identify this problem. You can try to use Network Monitor for test.
Network Monitor:
http://www.microsoft.com/en-in/download/details.aspx?id=4865
On the other hand, this problem probably caused by network proble, you can refer to the contents of the link below to make a troubleshoot with network:
How to Troubleshoot Basic TCP/IP Problems:
http://support.microsoft.com/kb/169790
Roger Lu
TechNet Community Support

Similar Messages

How to boot only one group in remote machine from master machine

Hi,
I want to know the command to boot entire remote machine from master machine and how to boot only one group for remote machine from master machine.
Thanks
Amit

You can boot the entire remote machine (after booting the Master machine) as follows:
tmboot -B <lmid of remote machine> -l <lmid of remote machine>.
For all the available tmboot options see http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rfcm/rfcmd.html#wp1032112
Regards,
Malcolm.

I purchased Adobe XI for a year. I am charged monthly on my credit card. The software only allows one print file to pdf after that it has a pop up marketing screen asking me to purchase it again. If I reboot I can get another print out of it. After a

I purchased Adobe XI for a year. I am charged monthly on my credit card. The software only allows one print file to pdf after that it has a pop up marketing screen asking me to purchase it again. If I reboot I can get another print out of it. After an hour of trying to reach somone on tech support I ran across this forum. Any help out there?

In the pop-up screen, have you tried licensing it and signing in? Signing in is crucial, so it knows what you paid for.

HT4314 i have 2 game center account with 1 apple id but it will only access one account. it says the other id is used but i cant change . help.

I have a game center account that has 2 accounts in the same apple id. the problem is i can only access one account. when i try to type in for the second account it says already taken. How do i change to the 2nd account with the same apple id? Please help.

that's the issue, you bought the OS online so Donald is right, it is being mailed to you. post the URL where you bought it.
the 'app store' is an application running on OSX itself where you can DL software.
so, you have to wait for mountain lion to arrive.
if you want to get a clean OS on your machine now, do this
reboot holding down command/option/R (hoping your machine supports this)
open disk utility, erase your HD so you have a single mac journaled partition
choose install OSX on this HD
let it run. from what you said, you will be back on lion.

When downloading i can only download one link at a time per window. i used to be able to download six links at a time per page. how do i go back to this?

got a new laptop. unsure of firefox verson on old as the computer quit taking a charge.
but essentially on my old laptop if a window had six downloadable links i would be able to download all six at once. now i can only download one link at a time. this is very annoying. i do not believe it is an issue with the new laptop itself as it is a highend toshiba.

Hello cherokeeguy, go to [http://kb.mozillazine.org/About:config about:config] find [http://kb.mozillazine.org/Network.http.max-persistent-connections-per-server network.http.max-persistent-connections-per-server] right-click on it, select modify and put a greater value, try 10 or 16, click ok to save it, exit firefox and restart it.
BUT this normally should not happen !
check it also in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode], select '''''"Start in Safe Mode" '''''and see if this happen again, if not see: [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]
also try to update to the latest firefox 16.0.1
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

My realm error while starting managed server on a remote machine

Tried to start the managed server on the remote from admin console...got the below error message
Node manager on the remote machine is up and running.Start request reaches the node manager but it fails to start the server because of below error.
<May 6, 2011 2:12:46 AM PDT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: javax.jdo.JDOFatalInternalException: Unexpected exception caught.
NestedThrowables:
java.lang.reflect.InvocationTargetException.
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: javax.jdo.JDOFatalInternalException: Unexpected exception caught.
NestedThrowables:
java.lang.reflect.InvocationTargetException
     at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)
     at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
     Truncated. see log file for complete stacktrace
Caused By: com.bea.common.engine.ServiceInitializationException: javax.jdo.JDOFatalInternalException: Unexpected exception caught.
NestedThrowables:
java.lang.reflect.InvocationTargetException
     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
     at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
     at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
     at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)
     Truncated. see log file for complete stacktrace
Caused By: javax.jdo.JDOFatalInternalException: Unexpected exception caught.
NestedThrowables:
java.lang.reflect.InvocationTargetException
     at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:549)
     at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:149)
     at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:99)
     at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)
     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.jdo.JDOHelper.getPersistenceManagerFactory(JDOHelper.java:534)
     Truncated. see log file for complete stacktrace
Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:891341 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "org.apache.openjpa.abstractstore.AbstractStoreBrokerFactory". See the nested exception for details.
     at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:95)
     at kodo.jdo.PersistenceManagerFactoryImpl.getPersistenceManagerFactory(PersistenceManagerFactoryImpl.java:41)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.OutOfMemoryError: allocLargeObjectOrArray: [Ljava/lang/Object;, size 782611408
     at java.util.Arrays.copyOf(Arrays.java:2760)
     at java.util.Arrays.copyOf(Arrays.java:2734)
     at java.util.ArrayList.ensureCapacity(ArrayList.java:167)
     at java.util.ArrayList.add(ArrayList.java:351)
     at org.apache.openjpa.conf.CacheMarshallerImpl.setInputUrlFromResourceLocation(CacheMarshallerImpl.java:226)
     Truncated. see log file for complete stacktrace
>
<May 6, 2011 2:12:46 AM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<May 6, 2011 2:12:46 AM PDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any pointers would be very helpful.

I think your problem is here: Caused By: java.lang.OutOfMemoryError: allocLargeObjectOrArray: [Ljava/lang/Object;, size 782611408
And is probably related to this: http://mail-archives.apache.org/mod_mbox/openjpa-dev/201006.mbox/%3C26423199.85161276545675046.JavaMail.jira@thor%3E
the comment in here is saying: Make the CacheMarshallerImpl a bit more tolerant to different configurations.
Could be the out of memory error you getting is related to your openjpa configuration, not sure here

Update-Help error when console application is run in remote machine via PS remoting

Hello,
When I execute a particular console application in a remote machine via PS remoting, I get an error related to update-help. When I execute it directly on the remote machine, it works...
My code:
$credential = Get-Credential -Credential "DomainName\AccountName"
$session = New-PSSession -ComputerName "MachineName" -Authentication Credssp -Credential $credential;
Invoke-Command -session $session -ScriptBlock {
try{
cd <network share location>
.\theConsoleApp.exe | Out-File C:\console-output.txt
$error | Out-File C:\console-error-output.txt
$exitCode
} catch {
throw $error
Error seen in the console:
NetNat, PcsvDevice, PSDesiredStateConfiguration, SoftwareInventoryLogging, StartScreen, TLS, WindowsSearch' with UI culture(s) {en-US} : Unable to retrieve the HelpInfo XML file for
UI culture en-US. Make sure the HelpInfoUri property in the module manifest is valid or check your network connection and then try the command again.
$error variable from above:
Errored out (exit code 1603) with error message: ErrorId 10010: Xpatch threw an unexpected exception: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
I’ve tried
two different user accounts
multiple file share locations
different OSs
different target servers
but have not determined the cause of the error.
I would appreciate any help on this.
-Rohan.

Clearly the remote EXE cannot run in that context. YOU should not run that program remotely.
I suspect there is also information you are not giving to us.
¯\_(ツ)_/¯

IPhone-only play one song then quits. After update

My Phone seems to have a problem where it only plays one song out of a playlist and maybe 2 seconds out of the next song and it quits the program and goes to the home page. The audio books don't seem to remember to start where they quit also. Worked fine before upgrade. Haven't tried to reset phone yet. Thanks for help.

Upon resyncing with my laptop this am the bug seemes to be gone and both problems have corrected them selfs. All songs play like they should and the audio books do remember where they stopped at.

Network error 3259 only on one specific file

I think the 1:00-2:00 p.m. file of 24, Season 6 may be damaged on the itunes Network. When I try downloading, it always gets to 116.2 megabytes downloaded, then gets "Error -3259: Network Timed Out". I've deleted temp files, and tried repeatedly from two different computers and the same file craps out at the same place. I downloaded 2:00-3:00 p.m. with no problem.
Who do I report this to to get the file fixed for downloading?

Thanks, but when I've done that in the past they've never answered me.
This time, I'm going to dispute the charge on my credit card. I've spent an hour like a trained monkey clicking the same stupid button over and over in hope of getting the reward for which I've already paid.
I would encourage others to do the same. It will cost Apple a lot more than $1.99 to resolve all of the disputed credit card charges than it would for them to fix their crappy network.

I lost my only navigation tool bar, so I can only open one window at a time, and can't use google. Help.

I'm not sure what I did, but I right clicked on my google tool bar (which I use since I can't find the Firefox navigation toolbar) and I somehow disabled it. Now I can only use one window at a time, and if I go to a website, I can't go to another without closing my current one so I can go to my homepage, which is google.

If the Menu Bar is hidden then press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

ITunes only plays one song at a time after upgrade to 6.0.1

This is MOST annoying!! When I play music from either library or playlists on my computer only one song plays and then it is done.It doesn't crash or anything, it just stops. I can click the repeat button till the cows come home and only one song plays--and doesn't repeat even if repeat song is checked. This is not a case of a playlist with "song preview" only playing the first song--this is any song, anywhere. Anyone else have this porblem? I have searched everywhere I could find and have not seen any reference to this problem.
Thanks in advance.
Brenda
P.S.--I HATE upgrading iTunes! Had I not gotten a new pod for Christmas I would still be on 5 (after all the problems getting it to work with my POP mail program).

This is MOST annoying!! When I play music from either
library or playlists on my computer only one song
plays and then it is done.It doesn't crash or
anything, it just stops. I can click the repeat
button till the cows come home and only one song
plays--and doesn't repeat even if repeat song is
checked. This is not a case of a playlist with "song
preview" only playing the first song--this is any
song, anywhere. Anyone else have this porblem? I have
searched everywhere I could find and have not seen
any reference to this problem.
Just to the left of every song is a little box. When you click it, a check mark appears in it and the box turns blue. iTunes will only "automatically" play checked songs. Unchecked songs get skipped.
So if all your songs are unchecked, iTunes will do exactly what you're describing it as doing. It'll play anything you tell it to, then stop, because it doesn't play unchecked songs unless you specifically tell it to play them.
Go to the Library, hit CTRL-A to select all your songs, then right click one of them and select "Check Selected Songs" or something to that effect. This will check all those songs and your problem is solved.

Error when starting Sun ONE Web Server 6.1SP4 after successful installation

I have installed Sun ONE Web Server 6.1SP4 on my Solaris computer and I receive the following error when I try to start the Admin server:
Sun ONE Web Server 6.1SP4 B01/20/2005 17:43
failure: CORE3170: Configuration initialization failed: Error running init funct
ion load-modules: dlopen of /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so failed
(ld.so.1: webservd: fatal: relocation error: file /opt/SUNWwbsvr/bin/https/lib/
libares3.so: symbol __res_state: referenced symbol not found)
I am running Solaris 8 and I have installed Patch 108993-22 as stated in chapter 2 of the installation and migration guide. I have also installed patches 116602-01, 115827-01, 113648-03, 112396-02, 111317-05, 111310-01, 111111-04, 111023-03, 110386-03, 108987-15, and 108528-24 since they are necessary for patch 108993-22.
I have been stumped by this error. I have tried several different ways to install this software but I always get the same error. I believe that I have the latest version of the Sun One Web Server and I received no error notifications when I installed it! Any help would be apeciated!
Thanks!!!!!

I think this might occur if you don't have the patch for SunAlert 46042 installed. There's more information on this critical Solaris security vulnerability, which was reported back in 2002, at http://sunsolve.central.sun.com/search/document.do?assetkey=1-26-46042-1
Can you run the following command to check if you have patch 109326-09 installed and let us know the result?showrev -p | grep 109326If you don't have 109326-09 or higher installed, you should install it as soon as possible. You can follow the link from the SunAlert. Better yet, install the latest Solaris 8 recommended patch cluster from http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access to make sure your system is fully patched and up to date.

Stereo tunes only play one channel and Internet hangs after 4.21 Install

My daughter recently updated her 2nd Gen iTouch to 4.21 which I assume is an operating system. On stereo tunes, now only one of the stereo sound channels plays (right side). On older monaural songs, both right and left earphones produce sound. Also, Internet hangs now after initial home page load. How do I either roll back to an older version of the OS or get fixes for 4.21?

http://www.thehangtime.com/gb/gbfaq2.html#leftspeakeronly

ITunes Library Only Play One Song at a Time After Upgrade to 7.2

Just upgraded to ITunes 7.2 this morning. After upgrade (on Windows Vista Enterprise operating system) ITunes Library no longer will play through the songs in the library. Try as I might to reset Controls, clicking on play gives me play of the single highlighted song but will not play on to the next song on the list, which it always did before. This is a BIG problem. Would appreciate any advice (knowing I've probably overlooked something simple) to solve this. Thanks!
Dell Optiplex 745 Windows Vista

that can happen if all the checkboxes to the left of the songs in your main library display have become unchecked.
if they are unchecked, hold down Ctrl and click one of the boxes to do a "recheck all".

Error in running EJB Client on a remote machine

I delploy my beans and can run the EJB Client locally. However when I try to run the Client on another machine, there are errors.
Here is the errors
Syntax error
Out of environment space
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/enterprise/appclient/Main
I have follow the step in the j2ee tutorial and set the env variables according. Here is the bat file I write
set APPCPATH=CBSAppClient.jar
set VMARGS=-Dj2eelogin.name=guest -Dj2eelogin.password=guest123 -Dorg.omg.CORBA.ORBInitialHost=192.168.0.2
runclient -client CBSApp.ear -name CBSClient -textauth
Do anyone facing the same problem with me?
And how can I solve the problems?
This is really URGENT, please help

You are running on Windows 9x or Me, right? The darn OS has 300 or so bytes allocated for environment by default.
Try setting the Initial environment to 4096 in the Properties|Memory tab for the batch file. That will get rid of "Out of environment space". The syntax error is another matter; Windows (except NT and derivatives) shells do not allow '=' in an environment variables value. You cannot overcome that. Some software (Sybase for instance) interprets # as = just because of that. Unfortunately, the JVM doesn't take such an approach.
Better, grab copies of Unix utilities for Windows (www.gnu.org) including the wonderful shell 'bash' and write .sh scripts, which are inherently more powerful.

Error 0x80070035 only on one of 20 remote machines, after months of use... strange!

Similar Messages

Maybe you are looking for