Error 0x80070057 when configuring Windows 7 Backup even after repair installation !
I've started getting Error 0x80070057 when trying to configure Windows 7 SP1 Backup "The parameter is incorrect".
Already did the following:
- http://support.microsoft.com/kb/982736/pl
- chkdsk c: /F /R (no errors)
- sfc /scannow (no errors)
- registry tweaks
- removing old registry backup entries
- moved partition to a different disk
- in-place repair install !!!
AND NOTHING !
Nothing wrong with sfc /scannow
Event viewer show such errors:
Błąd składnika Express Writer: nie można dodać składników Express Writer z katalogu System.
Operation:
Initializing Writer
Gathering Writer Data
Executing Asynchronous Operation
Context:
File Path: C:\windows\Vss\Writers\System\
Execution Context: Requestor
Current State: GatherWriterMetadata
Error-specific details:
Error: FindFirstFile(C:\windows\Vss\Writers\System\*.xml), 0x80070002, The system cannot find the file specified.
Błąd Usługi kopiowania woluminów w tle: nieoczekiwany błąd podczas badania interfejsu IVssWriterCallback. hr = 0x80070005, Access is denied.
. To jest często spowodowane przez niepoprawne ustawienia zabezpieczeń w procesie zapisującym lub żądającym.
Operation:
Gathering Writer Data
Context:
Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Name: System Writer
Writer Instance ID: {06036e1a-27d9-4b22-8aa2-1975e33169ca}
Błąd Usługi kopiowania woluminów w tle: nieoczekiwany błąd podczas wywoływania procedury RegSetValueExW(0x000001ec,SYSTEM\CurrentControlSet\Services\VSS\Diag\Registry Writer,0,REG_BINARY,000000000297EEB0.72). hr = 0x80070005, Access is denied.
Operation:
BackupShutdown Event
Context:
Execution Context: Writer
Writer Class Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Name: Registry Writer
Writer Instance ID: {232c094d-e556-42cc-9c03-4544badc76e0}
Błąd Usługi kopiowania woluminów w tle: nieoczekiwany błąd podczas wywoływania procedury RegSetValueExW(0x0000031c,SYSTEM\CurrentControlSet\Services\VSS\Diag\VssvcPublisher,0,REG_BINARY,00000000041EF220.72). hr = 0x80070005, Access is denied.
Błąd Usługi kopiowania woluminów w tle: nieoczekiwany błąd podczas wywoływania procedury RegSetValueExW(0x000001f4,SYSTEM\CurrentControlSet\Services\VSS\Diag\COM+ REGDB Writer,0,REG_BINARY,00000000017BF3E0.72). hr = 0x80070005, Access is denied.
Operation:
BackupShutdown Event
Context:
Execution Context: Writer
Writer Class Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Name: COM+ REGDB Writer
Writer Instance ID: {5f6f2b71-85e8-4f43-b3e2-667f1ea0daaf}
Similar Messages
-
Corrupt data error when using Windows backup on Oracle
Our SAP servers include a SDLT internal tape drive that we use for doing a complete system backup. When using Windows Backup we get the following message in the backup log:
WARNING: Portions of "\oracle\T00\sapdata1\protd_2\PROTD.DATA2" cannot be read. The backed up data is corrupt or incomplete.
This file will not restore correctly.
This is occuring on a couple of different systems but the wierd thing is when this happens in occurs on one Oracle drive in one system and the other Oracle drive on another system i.e. the G: drive on our TST sysytem and the E: drive on another. The E: and G: drives contain the main Oracle datafiles.
Has anybody ever encounter something like this and what can I do about it?
Thanks;
Gale S.Especially no backup tool would know about the
fact
that a Oracle block had been changed after it was
copied.
Now I have to contracdict
There are backup tools (e. g. OpenFile Manager from
Legato/EMC), that track the filesystem changes and
makes sure, the backups are consistent in sense of
filesystem blocks. We´re backing up some ORA
databases (non-SAP, 7.3.4 and 8.1.7) for ages now -
and I never saw this kind of corruptions.
Well, these Backup-Tools do perform copies I/O-Consistent. That's different than DB-Block-consistent in the first place. Anyhow due to the fact that the DBMS do have a syncronizing between I/Os and writing out the blocks this leads both to consistent blocks.
I just wonder, how the database would deal with such
"inconsistent" files. Given the fact, you start a
backup at filesystem block 0, the database is being
backed up and a transaction is committed and
something is written to block 100, 200 and 500. The
backup is on block 300. If you now restore the
database, it has the already commited block 500 in
the file but 100 and 200 are not yet written in the
database file. The redo will then find an already
commited transaction on 500. What magic will tell the
engine, that this is due to an online database
backup? I mean, if you set the tablespace to backup,
the engine "knows" the state - but if you just backup
the file, the engine is unaware of that... I´m just
curious how this is handled...
Well the trick here is: we tell the database before we plan to copy the data. When a ONLINE backup is done, the tablespaces are set into BACKUP mode. This changes two things for us:
1. The datafile headers of these tablespaces are not updated anymore although dirty blocks are still written out to these files. Since the control files that keep the SCN (system change number) are updated nevertheless, the database will know at recovery time that these files had been in online backup mode and do need recovery to become consistent again.
2. The UNDO-information is not only written out to the UNDO/ROLLBACK-Tablespace but additionally to the REDOLOGS. So, for the time where the tablespaces are in BACKUP mode, we have all information needed to make a block consistent again - regardless if a transaction had been commited or rolled back - in the redolog. So a full recovery of all changes is possible with
that.
That's basically the "magic" behind this.
If the copy of the datafile is done without this - well, then there's no magician in the world that would been able to get it consistent again. Online Backups with Oracle are only possible with BACKUP mode or RMAN (ok, and possible some 3rd party hacks...).
KR Lars -
I would appreciate your help on how to configure a gmail in a way it ask for the password everytime I connect?. In the only way I can configure it I have to include the pw when configuring the account and after that it do not ask for pw so everyone that shares my iPad can oppen my mail with no pw required.
ThankThe iPad is designed to be a single user device, and there is currently no way to password protect the Mail app - even removing the account password from Settings > Mail, Contacts, Calendars will just prevent new mail being downloaded, it won't hide those that have already been downloaded. There is this work-around for the app : https://discussions.apple.com/message/13127632#13127632 . Also there might be third-party email apps that feature password protecting.
-
The row was not found at the Subscriber error keeps popup and stopped synchronization even after inserting missing record at subscriber - transcational replication.
first error throws: Grab exact sequence number, find row and inserted at subscriber...
Start synchronizing, ran fine for a while, stopped again with error with different exact sequence number, repeat again same as step 1.......
how can we stop this and make it run without this error?
Please advise!!!Hi,
This means that your database is out of sync. You can use the continue on data consistency error profile to skip errors. However, Microsoft recommends that you use -SkipErrors parameter cautiously and only when you have a good understanding of the following:
What the error indicates.
Why the error occurs.
Why it is better to skip the error instead of solving it.
If you do not know the answers to these items, inappropriate use of the
-SkipErrors parameter may cause data inconsistency between the Publisher and Subscriber. This article describes some problems that can occur when you incorrectly use the
-SkipErrors parameter.
Use the "-SkipErrors" parameter in Distribution Agent cautiously
http://support.microsoft.com/kb/327817/en-us
Here are two similar threads you may refer to:
http://social.technet.microsoft.com/Forums/en-US/af531f69-6caf-4dd7-af74-fd6ebe7418da/sqlserver-replication-error-the-row-was-not-found-at-the-subscriber-when-applying-the-replicated
http://social.technet.microsoft.com/Forums/en-US/f48c2592-bad7-44ea-bc6d-7eb99b2348a1/the-row-was-not-found-at-the-subscriber-when-applying-the-replicated-command
Thanks.
Tracy Cai
TechNet Community Support -
Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?
This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).
-
When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.
Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.
-
Itunes gives error message when trying to backup ipone 6.
ITunes gives an error message when trying to backup IPhone 6. I followed some of the advice I have seen delete old backups and try again, but I still get an error message.
What error message?
Thanks -
Attempt to install Mountain Lion has highlighted need for internal disk repair. Even after "repair" ML still says disk is damaged. Attempt to restore from Time Machine back-up failed - cannot 'see' internal HD to restore to. Help! Has attempt to install ML caused these problems or just highlighted existing need to Repair Disk? Even so, why can back-up from Time Machine not see the internal drive to restore to?
Csound1, William & Sig .... thanks for taking the trouble to reply. I fear you are right - I'll need a new disk. I'm booked in at the Apple Genius Bar in Bordeaux, France on Wed ... quite a challenge as my French isn't great! The current internal disk is 500gb, does anyone know whether I can upgrade my 21.5" iMac (circa Oct-2009 vintage) to a larger size internal disk, 1Tb or even 2Tb? I already have one external 2Tb drive and another one on order (I have masses of media stored and more planned as I've just taken up photography). Seems a bit of a pain managing with only 500gb internal storage. OR, can you advise me on how I can store all my photos on my new 2Tb external drive - I can't seem to figure out how to set the path for iPhoto to see them (I can't even figure out where they are stored right now!). Same with iTunes, how do I set the default storage to the external drive (I moved everything manually and then imported them all from the new drive - it worked but seemed very convoluted). Any advice on how to manage multiple drives gratefully received. And thanks again for previous replies.
-
Receiving error message when trying to backup computer in Windows Vista Ultimate
I am receiving an error message when trying to back up files from backup and restore in Vista Ultimate it says Access is denied (0x80070005). This problem began occurring recently after a bunch of unwanted programs were inadvertently downloaded from the
internet. I uninstalled all of them using REVo uninstaller but some of the files were not removed in the process. Can someone out there help me resolve this problem with the error message I am experiencing? THX
DAGKarlluch...
Try here > iTunes for Windows: "Error 7" message when opening iTunes -
Error 0x80070543 when activate Windows Server 2008 Backup Features
Hi, When I try to activate the Window Server 2008 Backup Features, the system prompt me an error. please review below message appear at event viewer. Not sure how it happen / solve it?
"Installation failed.
Features:
Windows Server Backup Features
Error: Attempt to install Windows Server Backup failed with error code 0x80070543. Cannot open an anonymous level security token
Error: Attempt to install Command-line Tools failed with error code 0x80070543. Cannot open an anonymous level security token"Hi,
Have you checked the link Simon provided? Any progress?
For your information, the Servermanager.msc is dependent on the .NET framework. Any improper modification of the "Default Authentication Level" will cause the COM
modules related to .NET framework abnormal. When we attempt to install of Roles and Features to impersonate as ANONYMOUS LOGON, this security context doesn’t have permission on any of the System Folders and hence we are failing with the above error listed.
To fix the issue, please configure the related settings to default as the KB971509 suggested.
Thanks.
Nina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Hello,
When I try to run a system state backup with this command: wbadmin start systemstatebackup -backuptarget:<drive letter>
I get the error
"Failed to create the shared protection point on the source volumes.
ERROR - Volume Shadow Copy Service operation error (0x8004230f)
The shadow copy provider had an unexpected error while trying to process the specified operation."
I'm not sure how to fix this. I'm logged into the machine as an Administrator.
Windows Server Enterprise 2008 SP2 64-bit
Any suggestions??After I re-registered the dll, I'm still getting the same error in the command window. The DLL registers successfully and the "MS Software Shadow Copy Provider" starts fine.
Two errors in the Event Viewer:
1.)
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 1/21/2014 10:11:25 AM
Event ID: 521
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: mfacs-server-7.gs.umt.edu
Description:
Backup started at '1/21/2014 5:11:11 PM' failed as Volume Shadow copy operation failed for backup volumes with following error code '2155348075'. Please rerun backup once issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1db28f2e-8f80-4027-8c5a-a11f7f10f62d}" />
<EventID>521</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-01-21T17:11:25.287Z" />
<EventRecordID>11410</EventRecordID>
<Correlation />
<Execution ProcessID="4964" ThreadID="3528" />
<Channel>Application</Channel>
<Computer>mfacs-server-7.gs.umt.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTime">2014-01-21T17:11:11.920Z</Data>
<Data Name="ErrorCode">2155348075</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
</EventData>
</Event>
2.)
Log Name: Application
Source: VSS
Date: 1/21/2014 10:11:24 AM
Event ID: 12293
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: mfacs-server-7.gs.umt.edu
Description:
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details EndPrepareSnapshots({40d86592-3a48-4d38-afab-0e4a7b8bb8f1}) [hr = 0x8000ffff].
Operation:
Executing Asynchronous Operation
Context:
Current State: DoSnapshotSet
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="VSS" />
<EventID Qualifiers="0">12293</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-01-21T17:11:24.000Z" />
<EventRecordID>11409</EventRecordID>
<Channel>Application</Channel>
<Computer>mfacs-server-7.gs.umt.edu</Computer>
<Security />
</System>
<EventData>
<Data>{b5946137-7b9f-4925-af80-51abd60b20d5}</Data>
<Data>EndPrepareSnapshots({40d86592-3a48-4d38-afab-0e4a7b8bb8f1})</Data>
<Data>0x8000ffff</Data>
<Data>
Operation:
Executing Asynchronous Operation
Context:
Current State: DoSnapshotSet</Data>
<Binary>2D20436F64653A20434F52534E50534330303030313630392D2043616C6C3A20434F52534E50534330303030313539302D205049443A202030303030323732302D205449443A202030303030343139322D20434D443A2020433A5C57696E646F77735C73797374656D33325C76737376632E6578652020202D20557365723A204E5420415554484F524954595C53595354454D20202020202D205369643A2020532D312D352D3138</Binary>
</EventData>
</Event>
Results of vssadmin list writers:
C:\Windows\system32>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f3c10044-4938-4d49-9f2d-789c571a6428}
State: [7] Failed
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {aaa19109-d447-40ec-b71e-2a8fbaed55ad}
State: [7] Failed
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {f64b2bfa-fd68-4729-bebb-7e281b144fc5}
State: [7] Failed
Last error: No error
Writer name: 'DPM Writer'
Writer Id: {0074a271-4f24-43e0-9ec7-28a44189cb80}
Writer Instance Id: {38646851-4a56-4499-b90c-181a839cae95}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {7ae6130c-b116-44a9-87a4-4b8bee461131}
State: [7] Failed
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {62a5b392-a50f-4703-8c23-acb5590efcd1}
State: [7] Failed
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {1615a920-5ec9-43d0-b6ff-a5b767430623}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {f22b72f6-940b-42c9-a824-80858e6f5f5c}
State: [7] Failed
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {4c603239-dd36-4343-aba7-73858e574e39}
State: [7] Failed
Last error: No error
C:\Windows\system32>
Thanks! -
Script will not accept target volume when setting Windows Backup policy
I have manually configured a Windows Backup on a VM using the GUI. I set the target volume for the backup and it works fine. However, I am trying to script out the configuration of the backup and when I run the script, I get the following output:
Label : Backup
WBDisk : \\ ?\Volume{96ab04f0-5a45-11e4-80f1-00155dbae602}
WBVolume : Backup (E:)
Path :
TargetType : Volume
InheritAcl : False
PreserveExistingBackup : False
Date : 10/23/2014 12:00:00 AM
Day : 23
DayOfWeek : Thursday
DayOfYear : 296
Hour : 0
Kind : Unspecified
Millisecond : 0
Minute : 30
Month : 10
Second : 0
Ticks : 635496210000000000
TimeOfDay : 00:30:00
Year : 2014
DateTime : Thursday, October 23, 2014 12:30:00 AM
Date : 10/23/2014 12:00:00 AM
Day : 23
DayOfWeek : Thursday
DayOfYear : 296
Hour : 6
Kind : Unspecified
Millisecond : 0
Minute : 30
Month : 10
Second : 0
Ticks : 635496426000000000
TimeOfDay : 06:30:00
Year : 2014
DateTime : Thursday, October 23, 2014 6:30:00 AM
Date : 10/23/2014 12:00:00 AM
Day : 23
DayOfWeek : Thursday
DayOfYear : 296
Hour : 12
Kind : Unspecified
Millisecond : 0
Minute : 30
Month : 10
Second : 0
Ticks : 635496642000000000
TimeOfDay : 12:30:00
Year : 2014
DateTime : Thursday, October 23, 2014 12:30:00 PM
Date : 10/23/2014 12:00:00 AM
Day : 23
DayOfWeek : Thursday
DayOfYear : 296
Hour : 18
Kind : Unspecified
Millisecond : 0
Minute : 30
Month : 10
Second : 0
Ticks : 635496858000000000
TimeOfDay : 18:30:00
Year : 2014
DateTime : Thursday, October 23, 2014 6:30:00 PM
Set-WBPolicy : The specified file path does not exist or is not on a locally attached disk.
At D:\Admin\Configure_Backup.ps1:44 char:1
+ Set-WBPolicy -force -policy $BackupPolicy
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-WBPolicy], Exception
+ FullyQualifiedErrorId : System.Exception,Microsoft.Windows.ServerBackup.Commands.SetWBPolicy
The E: volume is one of three drives for the VM. I attach and detach the volume from the Hyper-V host weekly - creating a new VHD for each week of backups. This all works fine with me doing it manually, but I want to automate the process and
the script below won't let me. IDEAS???
# Open the existing policy in Edit mode
$BackupPolicy = Get-WBPolicy -Editable
# Now,define the parts of it.
# First,let's specify the files to backup
$FileSpec = New-WBFileSpec -Filespec C:\,D:\
# and then add that to the policy we're building
Add-WBFileSpec -policy $BackupPolicy -filespec $FileSpec
# Remove the existing target
$Target = Get-WBBackupTarget -Policy $BackupPolicy
Remove-WBBackupTarget -Policy $BackupPolicy -Target $Target
# Add the new target
$Target = New-WBBackupTarget -VolumePath E:
Add-WBBackupTarget -policy $BackupPolicy -target $Target
# Add System State and Bare Metal Recovery
Add-WBSystemState -policy $BackupPolicy
Add-WBBareMetalRecovery -policy $BackupPolicy
# Define the schedule
Set-WBSchedule -policy $BackupPolicy -schedule 00:30,06:30,12:30,18:30
# Finally, set for VSS Copy Backup
Set-WBVssBackupOptions -policy $BackupPolicy -VssCopyBackup
# Finally, we need to SET the policy before it actually takes control
Set-WBPolicy -force -policy $BackupPolicyHi Dan,
Since you want to replace the destination volume for the existing backups, I recommend you can delete the existing backup task and create a new backup task, or you can also try the steps below:
Reattach the original (old) volume and also attach the new volume to VM, then run the powershell script to
add the new target volume firstly, then remove the old volume, after you run the script you can detach the original volume from VM.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang -
Error 0x8004100a when configuring Network Load Balacning
Hello, I've been trying to configure NLB on my windows server machines. When I finish configuring the cluster on a machine, I get:
"Update not attempted. Error 0x8004100a". I checked the event viewer and there are no logs of this. I configured my cluster in unicast mode, and I have 2 NICs on my machine, one of them is virtual. What could be causing this?
Thanks in advance.Hi,
Is the server the member of a domain?
If yes, please check if Group Policy Computer Configuration-->Windows Settings-->Security Settings-->User Rights Assignment-->"Load and unload device drivers" is configured.
Please try to add the Domain Admins group into this setting.
After that, restart the server. Use command "gpresult /h C:\report.html" to check if the setting is applied to the server.
Best Regards.
Steven Lee
TechNet Community Support -
Freezes during "starting windows" message even after factory reset.
I've gone through diagnostic tests and they've shown it wasn't a hardware error. After a failed update to windows 10 my computer rolled back to windows 7. After the rollback when attempting to boot win 7 It froze and hung on the starting windows screen. At first i was able to boot in safe mode and navigate the desktop and drivers, but after plenty of failed fixes i had to result to a factory reset with alienrespawn. After the factory reset the issue still persists, and i can no longer boot up in safe mode. When i do, it tries to do first time installation and says that i has to reboot in normal mode to complete first time config. My computer didn't come with a disk so i can't re-install windows 7, and factory reset dosen't seem to fix the issue. All I need is to resolve this issue so i can get back with a clean slate to upgrade to windows 10. Any ideas?
Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer freezes during the "Starting Windows" message on your desktop, and I would be happy to help! Since your Alienware X51 computer is a Dell product, I recommend contacting Dell Technical Support for further assistance in this matter. Best Regards
-
Still Error 2927 when refreshing Windows 2012 R1 Host
I have SCVMM R2 and the latest rollups. This issue is only occureing on a Windows 2012 (R1) server. I do not see these issues on Windows 2008 R2 or Windows 2012 R2.
I have looked at other forum posts with no luck such as: https://social.technet.microsoft.com/Forums/systemcenter/en-US/ccff7b77-6fc5-4c4b-bf71-a08a5076a3fd/action?threadDisplayName=error-2927-when-refreshing-host-cluster
I also have cranked up the MaxConcurrentOperationsPerUser to no avail.
After I restart WinRM and SCVMM Agent, it is ok for a little while then the errors and "This service has exceeded its maximum of 100 concurrent operations per user allowed for plugin "WMI Provider" error begin again.
Any other ideas?
Thanks,
JasonHi Jason,
According to the similar thread you have mentioned , and you have run the following command but still doesn't work ?
winrm set winrm/config/Service @{MaxConcurrentOperationsPerUser="400"}
Could you please run command below with administrator privilege to list the current settings of winrm :
winrm get winrm/config
(By the way , did you restart the server recently ? )
Best Regards,
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Maybe you are looking for
-
Hi. I lost my iMac's hard drive and had a new one installed. I reloaded my old iWorks 08 software and then transferred my Pages documents from a portable HD to the iMac. The files open but the original text in them (they are journals) are in white ag
-
Macbook 10.5.8 recovery disk assistant
my macbook 10.5.8 recovery disk is corrupted is there any way i could download a new recovery software?
-
I have a home network with 2 Apple Airport Extreme Gigabit N routers. One is connected to my cable modem and is the "main" router handling the DHCP, etc. The other APX is at the other end of the house in my office and is connected by ethernet cable t
-
Cloning an SD card with only one SD slot on computer
I have a cpap machine which writes all of its data on a 2GB SD card. I'm fairly possessive about my data, and don't like having the card out of my machine for longer than it takes to download the data each morning. Periodically the doctor wants me
-
events parameters are pass by value (true or false).