Error 0x80070543 when activate Windows Server 2008 Backup Features

Hi, When I try to activate the Window Server 2008 Backup Features, the system prompt me an error. please review below message appear at event viewer. Not sure how it happen / solve it?
"Installation failed.
Features:
Windows Server Backup Features
Error: Attempt to install Windows Server Backup failed with error code 0x80070543. Cannot open an anonymous level security token
Error: Attempt to install Command-line Tools failed with error code 0x80070543. Cannot open an anonymous level security token"

Hi,
Have you checked the link Simon provided? Any progress?
For your information, the Servermanager.msc is dependent on the .NET framework. Any improper modification of the "Default Authentication Level" will cause the COM
modules related to .NET framework abnormal. When we attempt to install of Roles and Features to impersonate as ANONYMOUS LOGON, this security context doesn’t have permission on any of the System Folders and hence we are failing with the above error listed.
To fix the issue, please configure the related settings to default as the KB971509 suggested.
Thanks.
Nina
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

  • We want to activate Windows Server 2008 R2 on the system where trial version is already activated,

    We want to activate Windows Server 2008 R2 on the system where trial version is already activated,

    Hi,
    Based on your description, I’m a little confused with this issue.
    If you mean that convert the Windows Server 2008 R2 evaluation version to a full version, we can get following
    details from this KB: Windows Server 2008 R2 and Windows 7 evaluation version
    Question: Can you convert the evaluation version to a full version?
    Answer: Although this conversion is not blocked, we do not support an upgrade from an evaluation version
    to a full version or changing the product key to a full version key. Since there is no support for any type of upgrade you must do a install to new directory using non-evaluation media. If you change the product key to Full Version, the visual evaluation references
    in Winver and as displayed in Slmgr /DLV output are removed, but the WLMS service remains on the system and the media retains its evaluation status.
    Meanwhile, please refer to the following similar thread and check if can help you.
    Server
    2008 R2 180 day Trial to Full
    If just mean that extend Activation Grace Period, please refer to the following article.
    Extending
    Your Activation Grace Period on Windows Server 2008 and 2008 R2
    If anything I misunderstand or any update, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Windows Server 2008 backups failing

    I have a Windows Server 2008, fully patched that backups recently started to fail and now, we are unable to open the Windows Server Backup. Also unable to open Disk Management or any other applications requiring Virtual Disk.
    Attempts to start VDS from service or command line result in the following errors:
    1:           
    A timeout was reached (180000 milliseconds) while waiting for the Virtual Disk service to connect.
    2:           
    The Virtual Disk service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
    I added the debuglog to registry and the $vds$.log only records the following:
    (PID:8988,TID:10060,17:32:43) ERROR: CVdsLoader::LoadService, 3, hr=8007041D
    I have also increased the timeout dramatically to no avail.
    SFC /scannow returns:
    Windows Resource Protection found corrupt files but was unable to fix some of them.
    Nothing requiring Virtual Disk Service will operate making backups and imaging impossible.
    Any thoughts?

    Hi,
    As SFC could find some issues (but fail to fix), please try to DISM could help as well:
    DISM.exe /Online /Cleanup-image /Restorehealth
    Fix Windows corruption errors by using the DISM or System Update Readiness tool
    http://support.microsoft.com/kb/947821
    Also though the following hotfix is not specific for this error, it helps updating VDS components. Please try it and see if issue persists after installing it. 
    Virtual Disk Service (VDS) crashes when you try to extend a dynamic volume in an NTFS file system on a computer that is running Windows Vista, Windows Server 2008, Windows Server 2008 R2, or Windows 7
    http://support.microsoft.com/kb/975680
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Crystal Reports XI  stopped working error message on a Windows Server 2008

    We recently installed Crystal Report XI  in a Windows Server 2008 environment. After completed the installation as the Administrator every time that we try to execute Crystal we receive the following error message:
    "Crystal Reports has stopped working"
    Problem signature:
    Problem Event Name: BEX
    Application Name: crw32.exe
    Application Version: 11.0.0.1282
    Application Timestamp: 422d5c77
    Fault Module Name: StackHash_1fc1
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 7ef2fbfc
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.272.7
    Locale ID: 1033
    Additional Information 1: 1fc1
    Additional Information 2: 1fc163a1c57ae45571bce37d539b233f
    Additional Information 3: 2f92
    Additional Information 4: 2f92817e9e63d4100e2aa48e72910a78
    Any recommendation on what is causing this error?
    Thanks,
    Luis

    Hi, did you get this working? I'm really struggling to get up and running on 2008 R2, the CMS service just refuses to connect to the database. It also looks like the database wasn't created properly during the install. I set it up on an MSDE database, and when I look at it with sql management studio the database is there but there aren't any tables or anything else
    Can anyone either confirm or deny that its possible to run Crystal XI on 2008 R2?
    The error I'm getting when trying to start the service is:
    The root server reported an error Initialization Failure. (Reason: Unable to connect to the database using the provided connection string. Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified).
    I've confirmed that the ODBC connections work (both 32 bit and 64 bit) via the built in test, but Crystal for some reason isn't happy

  • End-User Experience error running agent on windows server 2008 R2

    Hi,
    I have installed implemented the end-Uer experience agent in a Windows 7 without issues but when we have installed the SDM 7.30 agent and the SAP GUI 730 in a Windows server 2008 R2 and we have configured the agent as End-User experience monitoring Robot in solution manager.
    We have distributed one script without issues but the executios are failing with the message:
    "SAPGUI Compontent" could not be instantiated (sapfewse):605
    We have reviewed the bellow notes but wothout success:
    1261706 - Kill bits set for SAP GUI Scripting
    1092631 - Remote vulnerabilities in SAP GUI for Windows
    We are able to run the scripts in the server directly in the SAPGUI and even with the EemEditor.
    SAP message is open since last week, but my be you can provide a faster response.
    Could you please help me.
    Kind Regards

    Have you followed installation procedure described in the following article: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html ?
    You can find troubleshooting hints in the following article: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_troubleshooting.html
    I'd reccomend to install CDA instead of AD agent (nice GUI...) but you'll have to create new (virtual) server for that: http://www.cisco.com/en/US/docs/security/ibf/cda_10/Install_Config_guide/cda_install.html

  • Error: "SYSTEM_SERVICE_EXCEPTION STOP: 0x0000003B Windows Server 2008 R2 SP1

    Hi!
    Having using Windows Server 2008 R2 we got crashs with stop error message that contains the following:
    SYSTEM_SERVICE_EXCEPTION
    *** STOP: 0x0000003b (0x00000000c0000046, 0xfffff80001af9760, 0xfffff88016193f50, 
    0x0000000000000000)
    Server is operated for a 4 month already, but crashs started just some days ago.
    Here is a zipped Minidump folder:
    https://drive.google.com/file/d/0B2zc7Tzw9BkGb2hBc1h0elU4dUE/view?usp=sharing
    Hope, it will help to resolve my problem
    Thanks in advance!!

    *******************************************************************************
    *                        Bugcheck Analysis                                    *
    SYSTEM_SERVICE_EXCEPTION (3b)
    An exception happened while executing a system service routine.
    Arguments:
    Arg1: 00000000c0000046, Exception code that caused the bugcheck
    Arg2: fffff80001af9760, Address of the instruction which caused the bugcheck
    Arg3: fffff88016193f50, Address of the context record for the exception that caused the bugcheck
    Arg4: 0000000000000000, zero.
    Debugging Details:
    EXCEPTION_CODE: (NTSTATUS) 0xc0000046 - An attempt to release a mutant object was made by a thread that was not the owner of the mutant object.
    FAULTING_IP: 
    nt!RtlRaiseStatus+18
    fffff800`01af9760 488b8424b8010000 mov     rax,qword ptr [rsp+1B8h]
    CONTEXT:  fffff88016193f50 -- (.cxr 0xfffff88016193f50)
    rax=0000000000000000 rbx=00000000c0000046 rcx=fffff88016193f50
    rdx=0000000000000001 rsi=0000000000000001 rdi=fffff88004082180
    rip=fffff80001af9760 rsp=fffff88016193e90 rbp=0000000000000000
     r8=0000000000000000  r9=0000000000000000 r10=0000000000000000
    r11=fffff880161944a8 r12=0000000000000000 r13=0000000000000000
    r14=fffffa8027026060 r15=0000000000000000
    iopl=0         nv up ei ng nz na po nc
    cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00000286
    nt!RtlRaiseStatus+0x18:
    fffff800`01af9760 488b8424b8010000 mov     rax,qword ptr [rsp+1B8h] ss:0018:fffff880`16194048=6097af0100f8ffff
    Resetting default scope
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT_SERVER
    BUGCHECK_STR:  0x3B
    PROCESS_NAME:  1cv7s.exe
    CURRENT_IRQL:  0
    LAST_CONTROL_TRANSFER:  from fffff80001ad6f01 to fffff80001af9760
    STACK_TEXT:  
    fffff880`16193e90 fffff800`01ad6f01 : fffffa80`209c72e0 fffffa80`209c71b0 fffff880`0646fda0 fffff880`06464000 : nt!RtlRaiseStatus+0x18
    fffff880`16194430 fffff880`06471f70 : fffff8a0`00000001 fffffa80`00000001 fffffa80`273fdb00 00000000`00000000 : nt!KeReleaseMutant+0x281
    fffff880`161944e0 fffff8a0`00000001 : fffffa80`00000001 fffffa80`273fdb00 00000000`00000000 00000000`00000000 : UPKey+0xdf70
    fffff880`161944e8 fffffa80`00000001 : fffffa80`273fdb00 00000000`00000000 00000000`00000000 fffff800`01ae0c16 : 0xfffff8a0`00000001
    fffff880`161944f0 fffffa80`273fdb00 : 00000000`00000000 00000000`00000000 fffff800`01ae0c16 fffff8a0`05dd39f0 : 0xfffffa80`00000001
    fffff880`161944f8 00000000`00000000 : 00000000`00000000 fffff800`01ae0c16 fffff8a0`05dd39f0 fffff8a0`05dd39f0 : 0xfffffa80`273fdb00
    FOLLOWUP_IP: 
    UPKey+df70
    fffff880`06471f70 ??              ???
    SYMBOL_STACK_INDEX:  2
    SYMBOL_NAME:  UPKey+df70
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: UPKey
    IMAGE_NAME:  UPKey.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  44f6bd6d
    STACK_COMMAND:  .cxr 0xfffff88016193f50 ; kb
    FAILURE_BUCKET_ID:  X64_0x3B_UPKey+df70
    BUCKET_ID:  X64_0x3B_UPKey+df70
    Followup: MachineOwner
    20: kd> lmvm UPKey
    start             end                 module name
    fffff880`06464000 fffff880`0647c500   UPKey    T (no symbols)           
        Loaded symbol image file: UPKey.sys
        Image path: \SystemRoot\System32\Drivers\UPKey.sys
        Image name: UPKey.sys
        Timestamp:        Thu Aug 31 12:43:57 2006 (44F6BD6D)
        CheckSum:         00024B95
        ImageSize:        00018500
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Bug Check Code 0x3B: https://msdn.microsoft.com/en-us/library/windows/hardware/ff558949%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
    The issue seems to be coming from UPKey.sys driver which its version dates since 2006: http://www.tweakmysystem.com/fixerror-exe/upkey.sys.html
    Please try using an up-to-date version or remove the product.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • What happens if I don't activate Windows Server 2008?

    Hello. I currently have some Windows Server 2008 virtual machines that I use for school labs. They're legitimate copies (they came with the MS 70-642 lab manual), but I forgot to activate them at school and I remember that I only have 12 days left to activate.
    Will I still be able to use the Windows Server 2008 machines after the activation deadline? Will any features (AD, IIS, DNS, etc.) be lost?
    Thanks.

    I am sure once the trail period has expired it won't allow you to log on. I think after you put username and password it comes with the activate screen and won't let you pass untill you activate it. 
    You might able to increase the trail period with the following method. I hope you still have some time left.
    Click Start, and then click Command Prompt.
    Type slmgr.vbs -dli, and then press ENTER to check the current status of your evaluation period.
    To reset the evaluation period, type slmgr.vbs –rearm, and then press ENTER.
    Restart the computer.
    I think you can do this 5 times.
    Thanks
    Umar

  • Windows Server 2008 backup schedule wizard not showing volumes

    Hi folks,
    We are running into issues when attempting to configure a Windows Backup schedule through either running the Backup Schedule wizard or through using the wbadmin utility. While I have previously posted this issue on a separate forum (with no luck) I’ve restructured
    this description based on the responses received and am also hoping that this a more suitable forum for the problem we are experiencing.
    On running the backup wizard the backup configuration screen shows the backup size to be 0KB for the Full Server option or if I choose ‘Custom’ and go to ‘select backup items’ the volume list is empty. However the later ‘select destination disk’ screen of
    the wizard lists all of the disks attached to the server along with the associated volume letters (via clicking the ‘Show All Available Disks’ option).
    On the backup wizard reaching the summary stage it then proceeds to format the destination disk. On completion of this format the wizard status then changes to ‘Creating backup schedule’ at which point it then fails with the message “The specified number
    of volumes is invalid”.
    Equally running the following wbadmin command:
    wbadmin ENABLE BACKUP -addtarget:{81737a1c-0000-0000-0000-000000000000} -schedule:21:00 -include:c:
    Results in the following error:
    “ERROR - One of the source volumes specified cannot be included: c: Please specify source as a volume drive letter or access path (if volume is mounted in a folder). Only volumes on locally attached disks can be backed up.”
    The server is a Dell PowerEdge R620 running Windows server 2008SP2 and is operating as expected other than for this windows back issue. Everything appears as normal when I view the disks within the Disk Management Console. Backups used to run on this server
    fine before it was migrated from old hardware to new hardware using Doubletake Move. Everything else is running fine since the migration apart from Windows backup so not why it would only be effecting Windows backup. I have also ran the wbadmin ‘delete
    catalog’ command to remove reference to the previous backups that were taken.
    Is there any other tests that I can run to determine why Windows backup is having trouble seeing the available volumes at the 'Select Backup items' stage but not at the Select Destination' stage? Any help or pointers in the right direction would be very
    much appreciated.
    Thanks,
    Niall

    Hi Mandy,
    Thanks for your advise and apologies for my delayed response. I've was on leave for the past two weeks and my colleague (who had been watching this post in my absence)
    was nervous about deleting registry entries (:>).. 
    I have searched for upper and lower filter values defined under the specified 'Class' registry folder and have found there to be no values specified for either:
    "Storage volume shadow copies" at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{533C5B84-EC70-11D2-9505-00C04F79DEAF}
    OR "Storage Volumes" at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}
    Happy to share the other values stored under these two keys if they would be of use in helping spot the problem?
    The only upperFilters value that I found within the Class registry folder that related to storage was:
    "Disk drives" at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318} which had a REG_MULTI_SZ upperFilters value of 'PartMgr'.
    Do you know if this Disk drives upperFilters value is as expected and if should/can I delete it?
    Also is there any other tests that I can run to determine why Windows backup is having trouble seeing the available volumes at the 'Select Backup items' stage but not at the Select Destination' stage?
    Thanks,
    Niall

  • Error received when installing SQL Server 2008 R2 Express

    I receive the following error when I try to install SQL Server 2008 R2 Express-
    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.
    ************** Exception Text **************
    System.Configuration.ConfigurationErrorsException: An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral,
    PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified. (C:\Users\rhaas\AppData\Local\Microsoft_Corporation\LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config line 5) ---> System.IO.FileNotFoundException:
    Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
    File name: 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
       at System.Configuration.TypeUtil.GetTypeWithReflectionPermission(IInternalConfigHost host, String typeString, Boolean throwOnError)
       at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.Init(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
       at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.InitWithRestrictedPermissions(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
       at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory..ctor(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
       at System.Configuration.RuntimeConfigurationRecord.CreateSectionFactory(FactoryRecord factoryRecord)
       at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
       --- End of inner exception stack trace ---
       at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
       at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
       at System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission)
       at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
       at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName)
       at System.Configuration.ConfigurationManager.GetSection(String sectionName)
       at System.Configuration.ClientSettingsStore.ReadSettings(String sectionName, Boolean isUserScoped)
       at System.Configuration.LocalFileSettingsProvider.GetPropertyValues(SettingsContext context, SettingsPropertyCollection properties)
       at System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider)
       at System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName)
       at System.Configuration.SettingsBase.get_Item(String propertyName)
       at System.Configuration.ApplicationSettingsBase.GetPropertyValue(String propertyName)
       at System.Configuration.ApplicationSettingsBase.get_Item(String propertyName)
       at Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings.get_WindowPlacement()
       at Microsoft.SqlServer.Configuration.LandingPage.LandingPageForm.OnLoad(EventArgs e)
       at System.Windows.Forms.Form.OnCreateControl()
       at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
       at System.Windows.Forms.Control.CreateControl()
       at System.Windows.Forms.Control.WmShowWindow(Message& m)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
       at System.Windows.Forms.ContainerControl.WndProc(Message& m)
       at System.Windows.Forms.Form.WmShowWindow(Message& m)
       at System.Windows.Forms.Form.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    ************** Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase:
    file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    LandingPage
        Assembly Version: 10.0.0.0
        Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
        CodeBase:
    file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/LandingPage.exe
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase:
    file:///C:/windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase:
    file:///C:/windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase:
    file:///C:/windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    Microsoft.SqlServer.Configuration.Sco
        Assembly Version: 10.0.0.0
        Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
        CodeBase:
    file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Configuration.Sco.DLL
    Microsoft.SqlServer.Chainer.Infrastructure
        Assembly Version: 10.0.0.0
        Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
        CodeBase:
    file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Chainer.Infrastructure.DLL
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase:
    file:///C:/windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    Accessibility
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
        CodeBase:
    file:///C:/windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
    Microsoft.SqlServer.Management.Controls
        Assembly Version: 10.0.0.0
        Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
        CodeBase:
    file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Management.Controls.DLL
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
        CodeBase:
    file:///C:/windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
    Does anyone have any ideas on how to proceed?  Installing will not complete.

    Hi Balmukund!
    Thanks for your help.  I did rename both folders to a generic name (rename_folder_1 & rename_folder_2) and the install failed again.  Did I rename the folders in a correct manner?  Below is a copy of the user.config file referenced in
    your post above.  Any additional direction would be very helpful.
    Thanks!
    <?xml version="1.0" encoding="utf-8"?>
    <configuration>
        <configSections>
            <sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
                <section name="Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
    allowExeDefinition="MachineToLocalUser" requirePermission="false" />
            </sectionGroup>
        </configSections>
        <userSettings>
            <Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings>
                <setting name="WindowPlacement" serializeAs="Xml">
                    <value>
                        <WINDOWPLACEMENT xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                            xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                            <showCmd>3</showCmd>
                            <ptMinPosition>
                                <x>-1</x>
                                <y>-1</y>
                            </ptMinPosition>
                            <ptMaxPosition>
                                <x>-1</x>
                                <y>-1</y>
                            </ptMaxPosition>
                            <rcNormalPosition>
                                <left>0</left>
                                <top>0</top>
                                <right>800</right>
                                <bottom>600</bottom>
                            </rcNormalPosition>
                        </WINDOWPLACEMENT>
                    </value>
                </setting>
            </Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings>
        </userSettings>
    </configuration>

  • Error 0x80072ee7 when activating Windows Server 2012 Standard ROK

    I am installing windows server 2012 standard ROK onto a HP Proliant micorsever.  I installed the product key using elevated command prompt (found instructions on hp site), but when I get to the point to activate the operating system using the following
    command cscript C:\windows\system32\slmgr.vbs -ato, I get an error message --> 0x80072ee7 On a computer running Microsoft windows non-core edition.  Why is this happening?  From prior research that I've done do I need to install a KMS Client
    key and if so what is the proper key for the OS that I am using?

    Hi,
    The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or for the Microsoft Update Web site. This error may occur if the Hosts file contains a static IP
    address also might occur due to one of the following reason.
    •  Programs or processes that interfere with Internet communications
    •  Resource issues on the computer
    •  High Internet activity
    To resolve the error examine the Host file (under System32\driver\etc folder) and check that Make sure that the file does not list any static IP entries for the Windows Update Web site or for the Microsoft Update Web site. Mean time sharing the article with
    you.
    1.  0x80072EE7 error code
    2.  KB 836941
    Hope it helps!
    Thanks.

  • Host Credentials Validation Error - Oracle database on Windows Server 2008

    I am trying to log into an oracle database residing on a windows 2008 server through enterprise manager. I keep getting the error Validation error - �. I have added my username to the "log on as bacth job" properties. but I still keep getting this error.

    Try also adding:
    Logon as a Service and Act as Part of the Operating System.
    I assume you are using a domain account and not one that is local to the box being monitored, correct?
    Also, in OEM, go to Preferences...Preferred Credentials and enter the user name and password that you are using for the Normal Username and Normal Password and then click test. If this works, you should be good to go.
    -Joe

  • Windows Server 2008 R2 activation via KMS failure

    Hello,
    I'm trying to activate about 20 Windows Server 2008 R2 via KMS. Before that I have successfully activated Windows 7 clients and Microsoft Office 2010 products. But when I try to activate Windows Server 2008 R2 clients via kms I'm getting the following error
    on the KMS host: 
    . Exception System.Runtime.InteropServices.COMException (0xC004F074)
    KMS host installed on the machine with Windows 7 Professional OS. From the VAMT GUI I can see the following Windows server license information :
    Key Type : CSVLK
    Edition : ServerStandard;ServerEnterprise;ServerWeb;ServerHPC
    Description : Server 2008 R2 Std and Ent Volume.
    If I try to activate product from the client I get the following error : 
    Error: 0xC004F074 The Software Licensing Service reported that the computer could not be activated. The Key Management Service(KMS) is unavailable. 
    I have searched a lot about this error. But still cannot solve the issue. 
    Thanks & Regards
    Ulzii

    Yes KMS host is Windows 7. I read all documents about KMS but haven't read this doc. So I have to change KMS host or add Win Server KMS host, that's right?
    Yes that's right. Windows "Client" OS editions, when setup as KMShost, cannot issue activations for Windows "Server" OS editions.
    To do so, you will need a KMShost product key for Windows Server - you will only have such a product key if you have purchased Windows Server licenses through Volume Licensing.
    (The Windows 7 KMShost product key cannot be installed on Windows Server OS)
    http://social.technet.microsoft.com/wiki/contents/articles/22510.volume-activation-kms-mak-adba-avma.aspx
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Volume License for Windows Server 2008 R2

    Hi,
    I have product key for activation of windows server 2008 R2. With this product key I can activate multiple machine (Don't know exact number).
    I am using this product key to activate windows server 2008 R2 in virtual machine. Buy mistake I activated windows in unwanted virtual machine which will be deleted now. So now how I can deactivate this windows license in these machine so I can reduce number
    of license usage count?
    Jignesh

    http://www.sevenforums.com/tutorials/18715-activate-windows-7-phone.html
    The above site will tell you how. When you get on  the phone you will ask how many time you loaded the OS. It will reset you count to what you give them.
    Sterl 

  • Windows Server 2008 R2 Backup failing with error - 0x8004231F

    Hi,
    I have Windows Server 2008 R2 Web Edition. Everything was working fine until recently. I tried checking for the log files, but I see that there are no log files that are created now in the location C:\Windows\Logs\WindowsServerBackup. The only files that
    are being created recently are of the type mentioned below.
    Wbadmin.1.etl
    WbadminUI.0.etl
    etc.
    I tried removing the old backup and starting a new backup. But, even now it is failing with the same error.
    When running the backup from the PowerShell, the output is as below.
    PS C:\Users\administrator> Wbadmin start backup -backupTarget:\\localhost\E$\WindowsImageBackup\Server01 -systemState -vss
    Copy
    wbadmin 1.0 - Backup command-line tool
    (C) Copyright 2004 Microsoft Corp.
    Note: The backed up data cannot be securely protected at this destination.
    Backups stored on a remote shared folder might be accessible by other
    people on the network. You should only save your backups to a location
    where you trust the other users who have access to the location or on a
    network that has additional security precautions in place.
    Retrieving volume information...
    This will back up volume System Reserved (100.00 MB) (Selected Files),SAN(I:) (Selected Files),Local Disk(C:) (Selected
    Files) to \\localhost\E$\WindowsImageBackup\Server01.
    Do you want to start the backup operation?
    [Y] Yes [N] No y
    The backup operation to \\localhost\E$\WindowsImageBackup\Server01 is starting.
    Starting to back up the system state [12/8/2013 9:29 AM]...
    Creating a shadow copy of the volumes specified for backup...
    Creating a shadow copy of the volumes specified for backup...
    Creating a shadow copy of the volumes specified for backup...
    Summary of the backup operation:
    The backup of the system state failed [12/8/2013 9:30 AM].
    Log of files successfully backed up:
    C:\Windows\Logs\WindowsServerBackup\Backup-08-12-2013_09-29-49.log
    Log of files for which backup failed:
    C:\Windows\Logs\WindowsServerBackup\Backup_Error-08-12-2013_09-29-49.log
    There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes
     to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup
     storage destination and volumes included in the backup.
    Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more th
    an 500 megabytes, the minimum is 320 megabytes of free space.
    Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte.
    ERROR - A Volume Shadow Copy Service operation error has
    occurred: (0x8004231f)
    Insufficient storage available to create either the shadow copy storage file or other shadow copy data.
    If you see the free space available in each of the drives, they are in plenty.
    C:\ 7.5 GB free of 70 GB
    E:\ 250 GB free of 499 GB
    I:\ 86.7 GB free of 350 GB
    I am out of any hints on how I can proceed now. Has any one had similar issues? Can any one give any hint on this? Thanks.
    Thanks.

    Some Additional info.
    Shadow Copy Storage association
       For volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\)\\?\Volume{a9f
    b0474-f1bd-11e0-b235-806e6f6e6963}\
       Shadow Copy Storage volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}
    \)\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: 32 MB (32%)
    Shadow Copy Storage association
       For volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01d1}\
       Shadow Copy Storage volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01
    d1}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: 35 GB (10%)
    Shadow Copy Storage association
       For volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01bd}\
       Shadow Copy Storage volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01
    bd}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: 149.999 GB (30%)
    Shadow Copy Storage association
       For volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e6963}\
       Shadow Copy Storage volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e69
    63}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: 4.99 GB (7%)
    Hope this might also help you experts to get a little more information.

  • 0xC0380013 error while restoring Windows Server 2008 R2 backup

    Hello!
    I have a Bare Metal Backup from phisical mashine with Windows Server 2008 R2 system. The machine has a 500GB disk with 200GB system volume. The disk is configured as dynamic.
    I also have prepared Virtual Mashine with 600GB disk, where I want to restore the backup.
    When I start procedure of restoring (using WinRE) i receive following error:
    0xC0380013 "There is not enough usable space for this operation".
    What is the reason of this error. How should I proceed to recover dynamic disk to virtual machine?
    Thanks for your suggestions!

    Hi,
    On current situation, please refer to following KB and check if can help you.
    "A required CD/DVD drive device driver is missing" or "A media driver your computer needs is missing" error message when you install Windows
    In addition, please check your system BIOS settings. Please refer to following thread and check if can help you.
    A required CD/DVD drive device driver is missing.....
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for