Error 0x800F081f when trying to add features or roles on Windows Server 2008 Standard SP2

Hello
When I try to add ANY feature or role on our Windows 2008 Server I get the following
"Attempt to install <feature> failed. (error value: 0x800F081F)
The source for the specified package or file was not found"
As our Windows Server 2008 is not R2 I have tried running the update readiness tool but this has not helped.
http://support.microsoft.com/kb/947821
The CheckSUR.log shows no errors after running the readiness tool.

Might try a repair install.
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard

Hello,
I'm getting an error when trying to add Print Services role in Windows 2012 Standard. I'm getting the same error whether I use the GUI or from PowerShell.
This is a new server install.
The PowerShell error follows:
add-windowsfeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The referenced assembly could not be found. Error: 0x80073701
At line:1 char:1
+ add-windowsfeature print-services
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
    Exception
    + FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
   owsFeatureCommand
Success Restart Needed Exit Code      Feature Result
False   No             Failed         {}
Any help with this issue will be greatly appreciated.

Hi,
I think you should start with chkdsk C: /F and sfc /scannow.
Regards.
Vivian Wang

Update error of SQL Server 2012 enterprise running on Windows server 2008 standard SP2 (32 bits)

Hi there;
I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
2008 and another of 2012.
My Windows server 2008 installed the following updates; (see below).
(KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
(KB2916036),(KB2862973),(KB2901113)
After the machine was re-started, I was not abble to connect
to the instance of SQL Server 2012. I am able
to connect to the instance of SQL Server 2008.
The error message I get when I atemp to connect can be found
at the end of the list of updates below.
Do I need to uninstall an update? if so, which one and how do I do that?
Thanks Gabriel I. Ruiz
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898858
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
Installation date: ‎2/‎12/‎2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2909921
Windows Malicious Software Removal Tool - February 2014 (KB890830)
Installation date: ‎2/‎12/‎2014 11:41 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/890830
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
Installation date: ‎2/‎12/‎2014 11:40 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898869
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2911502
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
Installation date: ‎2/‎12/‎2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901126
Security Update for Windows Server 2008 (KB2916036)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2916036
Security Update for Windows Server 2008 (KB2862973)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2862973
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
Installation date: ‎2/‎12/‎2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901113
===================================
Cannot connect to HAVANA\HAVANA_2012_1ST.
===================================
The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following: the client tried to connect to an unsupported version of SQL Server; the server was too busy
to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
Server Name: HAVANA\HAVANA_2012_1ST
Error Number: 233
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
No process is on the other end of the pipe

Hi,
Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
Manager. Re-type the user account name and password under Log on tab and see how it helps.
Thanks.
Tracy Cai
TechNet Community Support

I get error message when trying to add key tags

I get error message when trying to add key tags

You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package. How can I fix this?
Thanks
[email protected]

What is your operating system? Reader version?

I continue to get an error message when trying to add Header

I continue to get an error message when trying to add Header & Footer. Therefore I am unable to add page numbers to my pdf. Help!!

Sounds like the PDF has an issue. You can try to save it, close, and reopen to see if that fixes it. If there are no tags or other markup, you could print it to a new PDF and try on the new file.

Getting Error -9672 when trying to add printer wirelessly

Hi,
I seem to be getting an error -9672 when trying to add my HP PSC 1410 wirelessly to my airport network. I've tried on my intel iMac and my mac book but I'm getting the same error. Any suggestions on how to solve this?
ANY help is much appreciated.
Matt.

Unfortunately, not all USB printers are compatible with AirPort base stations. A quick look at the iFelix Unofficial AirPort Printer Compatibility List doesn't show this particular model. This doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?

I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?

I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Hang when opening multiple pdfs: Reader 10.0.1 (Win Server 2008 x64 SP2)

I have recently updated Adobe Reader to the latest patch update 10.0.1.
Previous to this update, I was able to open multiple pdfs at once and had no issues with the Adobe Reader software. After updating to 10.0.1 I've noted that when I attempt to open more than one pdf at a time, Reader hangs (Windows indicates a "Not Responding" error has occurred). After a series of minutes, the second (or third, fourth etc) file opens, and Reader appears to function as per normal..
I'm running Adobe Reader 10.0.1 on a Windows Server 2008 x64 (SP2) box, and didn't have this issue with the 10.0.0 release..
Does anyone else share this issue, and if so, is there an update planned to solve the issue? I would also be happy to provide more diagnostics/specs if these will provide info for developers to chase down the issue here..

I also have Reader 10.0.1 (Win 7 Home Premium x32). I can open several large PDFs (including one over 100 MiB) satisfactorily and then have the whole thing hang. As I am trying to work with these documents, I have not been patient enough to wait for minutes. I just have to terminate Reader and relaunch it.
I have removed some of my DLLs to stop Reader wasting my time preparing a long document for reading, which I do not need . (It would really help if Adobe would provide a setting to turn this off, instead of my having to hack it. )
I never had any similar problems with Reader 9. Did anyone test Reader X before releasing it? I have read elsewhere that turning Protected Mode off may help but...

Windows Server 2008 standard Activation Error Code 0xc004c003

Hi
I am trying to activate the windows server 2008 standard but i am not able to do so.
I am getting the error.
The product key you have entered does not appear to be a valid windows server product key.
I have also call to microsoft activation team but they won't be able to resolve the issue, they found that the product key is valid. Then why it is not getting activated.
Can someone help on this ? any reply really appreciated.

Hi,
Based on your description, we need to make sure that the product key information has been typed correctly and the product key matches to the edition installed.
Besides, regarding error code 0xC004C003, the following article can be worth taking a look.
Error 0xC004E002 during activation for Windows Vista, Windows Server 2008, Windows 7, or Windows Server 2008 R2
http://support.microsoft.com/kb/978305/en-us
Hope it helps.
Best regards,
Frank Shen

Error message when trying to add a printer -50?

I'm using an HP LaserJet 2100M, connected to my iMac G5 with a JetDirect 610 networking card through the ethernet port.
Usually it works, but now when I've tried to reset the printing preferences (often necessary to get it to work) and go to choose a printer, I get an error message: "An error occurred while trying to add the selected printer.....error -50."
I've tried restarting, and using the disk utility, but it says nothing needs to be repaired. Anybody have any suggestions? Do I have to reinstall, or will any updates help? I'm using 10.4.3
thanks

Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://tech.ifelix.net/1300.html
Using the Gimp-Print drivers for the HP PhotoSmart P1000 printer.
The supplied HP C3180 drivers will not work when the printer is connected to an Airport base station.
iFelix

Error message when trying to add new user

Hello,
Customer is working on 2005B (2005B 7.40.252 SP00 PL39).
They are working on this database since 2009.
No upgrade was recently done.
when trying to add a new user they get athe following error:
"A user was added outsite the application. Delet it, or preform'Restore Numbering' [Message 3512-7]"
Could you please advice.
Regards,
Maya

Hi Maya......
Go to Administration--> Utility and select the restore no. series.
Update this and try to add User.
But do it first in your test DB.....
Regards,
Rahul

Error message when trying to add printer

First my DeskJet 1125c wouldn't print then I got my fathers old deskjet 845c which worked for a few days. Now that doesn't work either and when I try to add a printer, I get an alert box with this message:
"An error occurred while trying to add the selected printers.
"server-error-service-unavailable."
So now I can't print from any of my two HP printers, DeskJet 845c or Deskjet 1125c.
Please advice
Best regds
PB G4 Mac OS X (10.4.9)

http://docs.info.apple.com/article.html?artnum=107054
You could use Printer Setup Repair from www.fixamac.net to help fix that, too.

Bizarre error message when trying to add BT Vision...

I am getting a bizarre message when trying to add BT Vision to my BT Infinity broadband which is due to install on Thursday. I'm hoping it is only due to the fact the order has not completed and will be fine in a week. I did speak to an "advisor" but I helpfully was told the line cannot be checked until the current order is complete and I'd obviously want to know if there will be any problem with me getting BT Vision prior to that!
Has anyone else seen this error message and have any advice? Note that I am definitely not in any trial and the 0800 number is now dead.

Hi Evil_Dan,
Welcome to the forum.
If you can email in your details we'll check this, you can get our "Contact Us" link by clicking on my profile page.
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Error:-9672 when trying to add HP Photosmart C3180 printer.

Printer: HP Photosmart C3180
"An error occured while trying to add the selected printer. Error:-9672"
Printer works fine if connected directly to my iMac. But, through "Airport Extreme Base Station", I get the error.
Anyone with same printer having same problem? Anyone solutions?
iMac Intel Core Duo Mac OS X (10.4.6)

I found the same thing out yesterday and did the same solution.
One issue should be noted. The quality of the print is much worse since we are not using the correct print driver. Works fine for standard unimportant text printing, but really can't be used for printing photos.
Connect the printer directly to the computer USB and print a photograph using the real print driver, then connect wirelessly using the above method and print the same photo. The difference is dramatic.
It also seems to overuse black ink when hooked up through the Airport, and the printer light blinks for a while after printing is done.
Anyway, I plan on leaving it hooked up wirelessly for convenience sake, but when good quality is needed I will attach it directly to the USB port.
You can verify my findings and let others know if you find the same thing I found.
Good luck, and lets hope there are more compatible printers available in the future.

Error 0x800F081f when trying to add features or roles on Windows Server 2008 Standard SP2

Similar Messages

Maybe you are looking for