Error 0x8024000B during client detection
Hi There,
Recently, we have faced a issue where drive holding WSUS content folder is went to offline due to storage issue. After doing the Reactivation of disk, Every thing looks good. But after few days we have done patching on server with different sub net other
the WSUS server subnet .We are not able to detect the patches in the Wsus client even after running the commands of Detect now and authorization by stopping the au service. But when we open the status report of WSUS client from Wsus console,it is showing
40 patches need to install. I have gone through WSUS log file and getting the below error first and later no error reporting just saying 0 updates downloaded. Any help on this is much appreciated.
WARNING: WU client failed Searching for update with error 0x8024000b
Agent * WARNING: Failed to filter search results, error = 0x8024000B
CltUI AU client got new directive = 'None', serviceId = {00000000-0000-0000-0000-000000000000}, return = 0x80010108
CltUI FATAL: Failed to show client UI, directive=7, hr=80010108
Thanks
Suri
We'll probably need to see a complete detection event in order to do any useful diagnostics.
The error codes presented here simply tell us that the connection was aborted, but they provide no information as to why that might have happened.
Please do the following on this client:
Reboot the system.
Run this command: wuauclt /resetauthorization /detectnow.
Wait 30 minutes.
Locate the point in the WindowsUpdate.log where the reboot started, and post ALL of the lines from there to the end of the WindowsUpdate.log.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.
Similar Messages
-
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
Client Copy error during client export / RX file is not getting
Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
HarisHi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris -
Client Copy error during client export / RX file is not getting generated
Hi Experts,
During the client export process of client copy in order to created two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
HarisHi Experts,
During the client export process of client copy in order to create two tranports requests(<SID>KT* and <SID>KX) for import we need to have the RT and RX files in data file folder and RT and RX in Co-file folder of usr\sap\trans. But I am getting all exceot RX which contains the client specific texts and forms. Hence I couldn't able to generated the second request <SID>KX.
In the transport log it is saying the package 'BCSC' doesn't exitst and some objects are not entered in the object directory.
Please advice me whether I can proceed the import with the available KT* request which conatinas client specific data and hence avoid the KX* request or please let me know whether there is any option to avoid this error while during a fresh export again.
Regards,
Haris -
Error during Client Export err:
Dear Experts,
We are on 4.7 EE, Oracle 10.2.0.4 and Windows 2003 (32 Bit with 2GB RAM) (QLY system)and our database size is close to 600 GB.
I have successfully restored my PRD data to QLY and now my QLY is running fine with no hiccups.
I wanted to do the same to my DEV(which was on 9.2.0.5 now upgraded to 10G) but things are not moving good as expected.
I first tried a database backup/restore which was not successful, then i tried a system copy from QLY--> DEV but the system copy failed due to some memory issues. Finally i opted for a client export which also is failing.
All i assume is that the QLY memory is not sufficient for these activities. I have also set the parameter recommendations for 10G based on the SAP Note: 830576.
The following is the error during a client export
=====================================================================================================
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function: db_setget
2EETW000 fcode: RT_GET (0)
2EETW000 tabname: COEP
2EETW000 len: 3
2EETW000 key:
2EETW000 ok fetches: 33871957
2EETW000 last entry: 08710000305427330002010
2EETW000 retcode: 2
2EETW125 SQL error "4030" during "" access: "ORA-04030: out of process memory when trying to allocate 64528 bytes (sort subheap,sort key)"
4 ETW000 ROLLBACK (1852108487).
2EETP200 Export with errors, request will not be imported
1 ETP150 MAIN EXPORT
1 ETP110 end date and time : "20100512075209"
1 ETP111 exit code : "12"
=====================================================================================================
When i searched based on the SQL error 4030 i had many replies suggesting to increase my pga and other memory related parameters.
Can anyone suggest me the optimal parameter recommendations based on the size of my RAM(2GB) for my Oracle and SAP please.
We are in the process of increasing it to 4GB very soon.
Awaiting a helpful reply
Thanks in advance
HunkyIf it is working on your QLY system, just use the same parameter set as there..
Kind regards,
Mark -
Web Acceleration Client Error (513) - Internal Error
The Web Acceleration Client detected an internal error which caused the connection between the Web Acceleration Client and Web Acceleration Server to be broken. Retrying the web page may correct the problem.
I get this error continuously when working in the ancestry.com website. I have to reload the page on almost every search I do on that website. This is the ONLY website that I get this error message on, can work continuously for several hours on other websites and never get this message. I've talked to the people at Ancestry.com support and they made 2 recommendations: turn of antivirus (did not help) or switch to another web browser. I tried both IE 11 and Chrome Version 31.0.1650.63 m and I did not have the problem with either of those 2 browsers getting this error.
Is there a problem with how Firefox and ancestry.com are communicating with each other?Hello byron.lewis, many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
Error occurred during initialization of VM
im new to jdeveloper please anyone help me...
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Users\reir\AppData\Local\Temp\trustStore9189074039610736238.jks -javaagent:../modules/org.eclipse.persistence_1.1.0.0_2-1.jar -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\reir\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Error opening zip file or JAR manifest missing : ../modules/org.eclipse.persistence_1.1.0.0_2-1.jar
agent library failed to init: instrument
Process exited.This issue is usally caused by missing rt.jar. It's a good idea to manually unpack libraries.
Look for your java library directory (usually jre<version>/lib) .
If you can see rt.pack and can't see rt.ajr -
make the follwoing (I consider you save this to a script file then run it and your JAVA_HOME is correctly set and you're using some sort of UNIX):
---------------------------------cut---------------------------------
#!/bin/sh
JH=${JAVA_HOME:-"/usr/java/jre1.5.0_04"}
UNPACK_EXE=$JH/bin/unpack200
if [ -f $UNPACK_EXE ]; then
chmod +x $UNPACK_EXE
PACKED_JARS="lib/rt.jar lib/jsse.jar lib/charsets.jar lib/ext/localedata.jar lib/plugin.jar lib/javaws.jar lib/deploy.jar"
for i in $PACKED_JARS; do
srcFile=${JH}/`dirname $i`/`basename $i .jar`.pack
dstFile=${JH}/$i
if [ ! -f $srcFile ]; then
printf "Error: Unable to find %s. Please, check out your installation.\n" $srcFile
exit 1
fi
$UNPACK_EXE $srcFile $dstFile
if [ ! -f $dstFile ]; then
printf "Error: unpack could not create %s. Please refer to the Troubleshooting\n" $dstFile
printf "Section of the Installation Instructions on the download page.\n"
exit 1
fi
rm -f $srcFile
done
else
printf "Error: unpack command could not be found. Please refer to the \n"
printf "TroubleShooting Section of the Installation Instructions on \n"
printf "the download page.\n"
printf "Please do not attempt to install this archive file.\n"
exit 2
fi
---------------------------------cut--------------------------------- -
Error Message During Vista Install W/ Bootcamp
I crashed my original vista installation, so I am trying to get it up and running again. After deleting the old partition and creating a new one with BCA in Leopard, I get this error message during vista installation
Windows cannot install required files. The file does not exist. Make sure all files required for installation are available, and then restart installation. Error Code: 0x80070005
I thought maybe it was My Vista DVD, so I borrowed a friends, and it did the same thing. This is on a Macbook PRO purchased a little over a month ago.
Please HELP! I need my vista installation up and running for work!"but when detecting hard drives, nothing shows up in the list."
I don't really understand that statement as without any drives showing up how were you able to even start the install?
At any rate, during your first installment, the one that succeded, do you remember which partition it was that you Formated with the windows installer? When you use Boot Camp to partition and install the windows os, BC sets the volume name to BOOTCAMP. As far as I know this is the one that you must use for your windows os. Before you can install windows though, you must use the windows installer to format it to NTFS <----- the format type depends on a at least a few conditions, the one that I can remember is partition size. I believe 32G and above it HAS to be NTFS. But my point is, if you try and use any other partition that might come up on your list besides the one that BC made for you, it will probably error out (if you even get anywhere at all with it). Do you know FOR SURE that you chose the correct partition to format? This is the only other possibility that I can come up with at the present time. -
Error occurred during CTM planning run
Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
<i> 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
<i> 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
<i> 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
<i> 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
<i> 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
<i> 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
<i> 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
<i> 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
<i> 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
<i> 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
<i> 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
<i> 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
<i> 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
<i> 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
<i> 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
<i> 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
<i> 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
<i> 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
<i> 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
<i> 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
<i> 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
<i> 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
<i> 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
<i> 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
<i> 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
<i> 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
<i> 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
<i> 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
<i> 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
<i> 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
<i> 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
<i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
<i> 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
<i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
<i> 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
<i> 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
<i> 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
<i> 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
<i> 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
<i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
<i> 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
<i> 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
<i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
<i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
<i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
<i> 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
<i> 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
<i> 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
<i> 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
<i> 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
<i> 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
<i> 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
<i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
<i> 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
<i> 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
<i> 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
<i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
<i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
<i> 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
<i> 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
<i> 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
<i> 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
<i> 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
<i> 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
<i> 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
<i> 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
<i> 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
<i> 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
<i> 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
KhadarHi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran. -
An error occurred during olap API metadata retrieval. This is probably caus
this is what i have done so far. i really nead some help asap!!!
1. Install Oracle 9i Release 2 (9.2.0.1) Enterprise Edition with the General purpose database configuration (Data warehouse works as well). At the end of the installation I chose the password management button to change passwords for the few necessary accounts: SYS, SYSTEM, OLAPSYS, SH.
2. Download the p3948480_9206_WINNT.zip from metalink, the 9.2.0.6 patchset
3. Shut down any existing Oracle9i database instances with normal or immediate priority. Stop all listener and other services running in the Oracle home directory where you want to install the patch set.
4. unzip the content of thepatch to a temp directory
5. start setup.exe under the temp directory (it will start the Oracle Universal installer 10.1.0.3)
6. install the patchset to your Oracle home, selecting the source in the temp_dir\stage\products.jar file
7. review carefully the post-installation tasks for the patchset:
Review the following sections before upgrading a database (quote from the patchset html readme):
8.2.1.1If JServer is part of the installation ensure that there is at least 10 MB of free space allocated to the SYSTEM tablespace.
8.2.1.2 Check XDB Tablespace Size
For RAC installations, ensure that there is at least 50 MB of free space allocated to the XDB tablespace.
8.2.1.3 Set the SHARED_POOL_SIZE and JAVA_POOL_SIZE Initialization Parameters
Set the value of the SHARED_POOL_SIZE and the JAVA_POOL_SIZE initialization parameters as follows:
Start the database:
SQL> STARTUP
If necessary, enter the following command to determine whether the system uses an initialization parameter file (initsid.ora) or a server parameter file (spfiledbname.ora):
SQL> SHOW PARAMETER PFILE;
This command displays the name and location of the server parameter file or the initialization parameter file.
Determine the current values of these parameters:
SQL> SHOW PARAMETER SHARED_POOL_SIZE
SQL> SHOW PARAMETER JAVA_POOL_SIZE
If the system is using a server parameter file:
If necessary, set the value of the SHARED_POOL_SIZE initialization parameter to at least 150 MB:
SQL> ALTER SYSTEM SET SHARED_POOL_SIZE='150M' SCOPE=spfile;
If necessary, set the value of the JAVA_POOL_SIZE initialization parameter to at least 150 MB:
SQL> ALTER SYSTEM SET JAVA_POOL_SIZE='150M' SCOPE=spfile;
If the system uses an initialization parameter file, if necessary, change the values of the SHARED_POOL_SIZE and the JAVA_POOL_SIZE initialization parameters to at least 150 MB in the initialization parameter file (initsid.ora).
Shut down the database:
SQL> SHUTDOWN
8.2.2 Upgrade the Database
After you install the patch set, you must complete the following steps on every database associated with the upgraded Oracle home:
Log on as a member of the Administrators group to the computer where the Oracle components are installed.
Use SQL*Plus to login to the database as the SYS user with SYSDBA privileges:
sqlplus /NOLOG
CONNECT SYS/password AS SYSDBA
Enter the following SQL*Plus commands:
SQL> STARTUP MIGRATE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catpatch.sql
SQL> SPOOL OFF
Restart the database:
SQL> SHUTDOWN
SQL> STARTUP
Run the utlrp.sql script to recompile all invalid PL/SQL packages now instead of when the packages are accessed for the first time. This step is optional but recommended.
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\utlrp.sql
12. Install JDeveloper 9.0.4 (download it from OTN and just unzip it in a directory ... it doesn't require an oracle home)
13. Install BI Beans 9.0.4 (download it from OTN as well), run the setup.exe that comes with it and in the destination oracle home select the directory where you installed JDeveloper and give an oracle home name to it)
14. Install the BIBDEMO schema:
Create a directory on the computer that is running the Oracle9i database. This install_home directory is the location to which you will upload the data files that are required to build the BIBDEMO schema.
On the computer where BI Beans is installed, locate the bibeans_home\bibdemo_schema folder (where bibeans_home is the root folder of your BI Beans installation). Copy all of the files found in this folder to the install_home folder on your server machine.
Open a DOS prompt and navigate to the install_home folder.
Run bibdemo.bat to install the schema, using the following syntax:
bibdemo.bat <path to Oracle database files >
For example, for an instance named my9iService, enter the following:
bibdemo.bat D:\OraHome1\oradata\my9iService
You are prompted for the password for the sys as sysdba user.
The script takes approximately 15 minutes to run, depending on the machine specifications. It is normal to see some error messages while the script is running. In addition, when materialized views are being created in the database, the script will appear to stop; this is also normal. A clear message will tell you when the script has completed.
The log files (*.log) that are generated by the installation script are stored in the folder from which you ran the script.
Here's what
bi_checkconfig.bat -h ana -po 1521 -sid proiect -u bibdemo -p bibdemo -q
returned:
BI Beans Diagnostics(v1.0.2.0) 2/28/05
===============================================================================
JDEV_ORACLE_HOME .......................... = E:\OraDS
JAVA_HOME ................................. = E:\OraDS\jdk
JDeveloper version ........................ = 9.0.4.1.1.1436
BI Beans release description .............. = BI Beans 9.0.4 Production Release
BI Beans component number ................. = 9.0.4.23.0
BI Beans internal version ................. = 2.7.5.32
Connect to database ....................... = Successful
JDBC driver version ....................... = 9.2.0.4.0
JDBC JAR file location .................... = E:\OraDS\jdev\lib\patches
Database version .......................... = 9.2.0.6.0
OLAP Catalog version ...................... = 9.2.0.1.0
OLAP AW Engine version .................... = 9.2.0.1.0
OLAP API Server version ................... = 9.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in bibdemo
OLAP API JAR file version ................. = 9.2
OLAP API JAR file location ................ = E:\OraDS\jdev\lib\ext
Load OLAP API metadata .................... = Successful
Number of metadata folders ................ = 2
Number of metadata measures ............... = 12
Number of metadata dimensions ............. = 8
Testing sample query for measures and dimensions
(S=Schema, C=Cube, M=Measure, D=Dimension)
1/21) Measure Budget ................... = Successful
S=BIBDEMO, C=BIBDEMO_BUDGET_CUBE, M=BUDGET
2/21) Measure Actual ................... = Successful
S=BIBDEMO, C=BIBDEMO_ACTUAL_CUBE, M=ACTUAL
3/21) Measure Close Price .............. = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_CLOSE
4/21) Measure Open Price ............... = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_OPEN
5/21) Measure Low Price ................ = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_LOW
6/21) Measure High Price ............... = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_HIGH
7/21) Measure Stock Volume ............. = Successful
S=BIBDEMO, C=BIBDEMO_STKPRICE_CUBE, M=STKPRICE_VOLUME
8/21) Dimension Division ............... = Successful
S=BIBDEMO, D=DIVISION
9/21) Dimension Line Items ............. = Successful
S=BIBDEMO, D=LINE
10/21) Dimension Time ................... = Successful
S=BIBDEMO, D=TIME
11/21) Dimension Day .................... = Successful
S=BIBDEMO, D=DAY
12/21) Dimension Stock .................. = Successful
S=BIBDEMO, D=STOCK
13/21) Measure Costs .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.COSTS
14/21) Measure Promotion ................ = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.PROMO
15/21) Measure Quota .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.QUOTA
16/21) Measure Units .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.UNITS
17/21) Measure Sales .................... = Successful
S=BIBDEMO, C=ANALYTIC_CUBE, M=F.SALES
18/21) Dimension Channel ................ = Successful
S=BIBDEMO, D=CHANNEL
19/21) Dimension Geography .............. = Successful
S=BIBDEMO, D=GEOGRAPHY
20/21) Dimension Product ................ = Successful
S=BIBDEMO, D=PRODUCT
21/21) Dimension Time ................... = Successful
S=BIBDEMO, D=TIME
Metadata output location .................. = E:\OraDS\bibeans\bi_checkconfig\bi
_metadata.txt
To interpret this output, see the "Displaying Information about your Oracle9i Bu
siness Intelligence Beans Client Configuration" technical note, whose file name
is bi_checkconfig_tn.html
These diagnostics are captured in: E:\OraDS\bibeans\bi_checkconfig\bi_checkconfi
g.xml
now: i have created some new stuff:
1). user ana with roles:
-dba
-olap_dba
-connect
-resource
(same roles as bibdemo)
2).schema ana; tablespace ana (permanent), tablespace anatemp (temporary)
3).i have created some relational tables and i have inserted some data in them:
agent, aparat (cofee machines), beneficiar (clients), locatii (city), raport (REPORT), timp (time), tipaparat (types of cofee machines), tipbautura (products : types of cofee made by all the cofee machines), zone (state)
4). one fact table with:
- sold cantity (measure)
- id_bautura (id_product) primary key
- id_timp(id_time) primary key
- id_beneficiar (id_client) primary key
- id_agent primary key
- id_locatie (id_city) primary key
- id_aparat (id_cofee_machine)primary key
i have inserted some data also
5).dimensions:
AGENT_DIM :levels: codag(id_agent), numeag (agent name), telefag (agent phone number)from relational table agent
BENEFICIAR_DIM :levels: codben (id_client), denumire (client name), adresa (adress) ,codl (id_city) etc from relatinal table beneficiar (clients)
TIMP_DIM :levels: id, year, month from relational table timp (time)
TIPBAUTURA_DIM :levels: codbautura (id_product), numebautura (product name)from relational table tipbautura (products)
ZONA_DIM :levels: codzona (id state), numezona (state name), codoras (id city), numeoras (city name) with ierarhy id_state---id_city FROM 2 RELATINAL TABLES CITY AND STATE!!!!!!!! AM I ALOUD TO DO THAT?????
DO I NEED TO CREATE A DIMENSION FROM ONLY ONE TABLE???????
APARAT_DIM :LEVELS: codben (id client), codtip (id machine type), denumireap (machine type name), matricolap ((machine id) (FROM 2 RELATIONAL TABLES ALSO!!!!!!! FROM TYPES OF COFEE MACHINES AND COFEE MACHINES!!!!!
6). I HAVE NOW CREATED THE CUBE FROM THE FACT TABLE AND WITH ALL THE DIMENSIONS
7). summary advisor wizard NOT WORKING! IT NEVER STOPS!
8). I HAVE CREATED ALSO ONE materialized view FOR THE CUBE
IF I COMPILE IT... NO ERRORS
9). CUBE VIEWER NOT WORKING!!!!!!! IT ONLY APEARS A BELL!!!
NOW IF I RUN BI_CHECK CONFIG ON ANA AND ALSO ON BIBDEMO!!!!!!!!!!!!
IT SAYS:
1) An error occurred during olap API metadata retrieval. This is probably caused by inconsistent metadata.
============================================================================
oracle.express.ExpressServerExceptionError class: Unknown Error
Server error descriptions:
INI: System failure, Generic at TxsOqConnection::getDefaultDatabase
at oracle.express.olapi.data.full.ExpressDataProvider.getMetadataProviderInterface(ExpressDataProvider.java:1003)
at oracle.olapi.metadata.MetadataFetcher.initialize(MetadataFetcher.java:73)
at oracle.olapi.metadata.MetadataFetcher.<init>(MetadataFetcher.java:45)
at oracle.olapi.metadata.BaseMetadataProvider.<init>(BaseMetadataProvider.java:47)
at oracle.olapi.metadata.mdm.MdmMetadataProvider.<init>(MdmMetadataProvider.java:130)
at oracle.express.olapi.data.full.ExpressDataProvider.getDefaultMetadataProvider(ExpressDataProvider.java:964)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.getMdmMetadataProvider(MDMMetadataDriverImpl_92.java:1133)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverImpl_92.attach(MDMMetadataDriverImpl_92.java:810)
at oracle.dss.metadataManager.server.drivers.mdm.MDMMetadataDriverImpl.attach(MDMMetadataDriverImpl.java:125)
at oracle.dss.metadataManager.server.MetadataManagerImpl.buildObjectModel(MetadataManagerImpl.java:1092)
at oracle.dss.metadataManager.server.MetadataManagerImpl.attach(MetadataManagerImpl.java:969)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:876)
at oracle.dss.metadataManager.client.MetadataManager.attach(MetadataManager.java:799)
at BICheckConfig.checkConnection(BICheckConfig.java:277)
at BICheckConfig.main(BICheckConfig.java:1348)
I TRYED ALSO WITH USER ANA WITH ROLES:
- DBA
- CONNECT
-RESOURCE
- OLAP_USER
NOT WORKING! AND ALSO BIBDEMO NOT WORKING!
WHAT AM I MISSING? SHOULD I USE AW MANAGER? OR DO I NEED TO CREATE AN AMNALITIC WORKSPACE???
WHAT ARE THE STEPS TO CREATE A GOOD METADATA????Hi,
The issue here is if the whole catalog is corrupt or just one schema. So to try and determine the status of the catalog I would try:
1) Using OEM remove all the objects you created
2) I presume you created your database using the Database Configuration Assistant? You should have used the warehouse template
3) Make sure the following accounts are unlocked and also not expired : SH, OLAPSYS
4) Make sure the password for the SH schema is SH
5) Make sure the password for the OLAPSYS account is manager
6) Install the BIBDEMO schema that is shipped with BI Beans. This in the jdev_home/bibeans/bibdemo_schema
The installation process will remove SH schema from the OLAP catalog.
7)Once this is installed use JDeveloper to see if you can create a crosstab or graph.
8) If the BIBDEMO schema works try creating your new schemas one at a time.
9) Make sure the if you define the a dimension as type time it has END_DATE (column type DATE) and TIME_SPAN (column type number) defined. Otherwise don't define the dimension as type time.
Hope this helps
Keith Laker
Product Manager
Oracle Business Intelligence Beans -
Error - "Exception during parsing of upload document"
Hi,
I am getting following error when trying to upload data with my custom integrator:
"The upload process has completed with errors. Press Close to return to the document and fix the errors.
Upload processing did not complete
Exception during parsing of upload document"
My custom integrator was created for UPDATE mode with view AP_HOLDS_V and Release_Holds API. I also added Standalone Query (to limit downloaded data to not released holds and user releaseable). Layout contains only API parameters fields (however I had some context fields, but error message was the same then).
I am quite new to Web ADI and I still don't have full understanding, maybe someone can also answer following questions:
- what is mapping needed for? is this to map view/table fields with the layout field?
- how does integrator know which layout field should be mapped with parameters of API?
- is there no web adi template to modify columns assigned to interface? is this only possible with UPDATE commands?
- where is bne log file stored?
I would appreciate if someone can help. I was even debugging VBA macro to see if that error is on client or server side, but it looks like it is on the server side.
Regards
PiotrAny idea what this error message means?
6/20/12 5:45 AM CRITICAL ERROR BneUploader::Exception - going to tollback
6/20/12 5:45 AM ERROR BneAsyncUploadPage.renderPage Error trying to check whether the job will be importing.
6/20/12 5:45 AM ERROR BneAsyncUploadPage.renderPage Parameter value is not a Boolean.
6/20/12 5:46 AM ERROR BneAsyncUploadPage.renderPage Error trying to check whether the job will be importing.
6/20/12 5:46 AM ERROR BneAsyncUploadPage.renderPage Parameter value is not a Boolean.
6/20/12 5:46 AM ERROR BneAsyncUploadPage.renderPage Error trying to check whether the job will be importing.
6/20/12 5:46 AM ERROR BneAsyncUploadPage.renderPage Parameter value is not a Boolean.
6/20/12 5:46 AM CRITICAL ERROR BneUploader.processUpload(), fatal exception: java.lang.ArrayIndexOutOfBoundsException: 8
6/20/12 5:46 AM CRITICAL ERROR java.lang.ArrayIndexOutOfBoundsException: 8
at oracle.apps.bne.integrator.upload.BneRefPLSQLUpload.setupColumnNameMapping(BneRefPLSQLUpload.java:531)
at oracle.apps.bne.integrator.upload.BneRefPLSQLUpload.preparePLSQLStatement(BneRefPLSQLUpload.java:371)
at oracle.apps.bne.integrator.upload.BneRefPLSQLUpload.doUpload(BneRefPLSQLUpload.java:249)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2320)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1178)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:175)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:309)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:117)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:141)
Edited by: PiotrekJ on 22-Jun-2012 01:59 -
I received the above error reinstalling SQL Server 2008. I have tried all suggestions. This error also appears when I install any version of SQL Server.
I have also installed;
Microsoft® .NET Framework Version 2.0.50727.4927
Microsoft® .NET Framework Version 4.0.31106.0
Microsoft® .NET Framework Version 3.0.6920.50
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052081
Exit facility code: 1212
Exit error code: 1935
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-23 19:17:20
End time: 2014-02-23 19:21:35
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SqlSupport_KatmaiRTM_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: OHPC
Machine processor count: 2
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: H:\SQLServer2008R2_SP1\x64\setup\
Installation edition: DEVELOPER
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: OHPC\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SystemConfigurationCheck_Report.htm
SFC/ Scannow
2014-02-23 19:08:22, Info CSI 0000016f [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:08:22, Info CSI 00000170 [SR] Beginning Verify and Repair transaction
2014-02-23 19:08:23, Info CSI 00000172 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:23, Info CSI 00000174 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000176 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:26, Info CSI 00000177 [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:08:26, Info CSI 00000179 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 0000017c [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:08:27, Info CSI 0000017d [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:08:27, Info CSI 00000180 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:08:27, Info CSI 00000182 [SR] Verify complete
2014-02-23 19:12:33, Info CSI 00000326 [SR] Verifying 100 (0x0000000000000064) components
2014-02-23 19:12:33, Info CSI 00000327 [SR] Beginning Verify and Repair transaction
2014-02-23 19:12:33, Info CSI 00000329 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032b [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:12:35, Info CSI 0000032c [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:12:35, Info CSI 0000032f [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:12:36, Info CSI 00000331 [SR] Verify complete
2014-02-23 19:13:14, Info CSI 0000035d [SR] Repairing 3 components
2014-02-23 19:13:14, Info CSI 0000035e [SR] Beginning Verify and Repair transaction
2014-02-23 19:13:14, Info CSI 00000360 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000362 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000364 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000366 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:14, Info CSI 00000367 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
2014-02-23 19:13:15, Info CSI 0000036a [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 0000036c [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 0000036d [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
2014-02-23 19:13:15, Info CSI 0000036f [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000371 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-23 19:13:15, Info CSI 00000372 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
2014-02-23 19:13:15, Info CSI 00000375 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
source file in store is also corrupted
2014-02-23 19:13:15, Info CSI 00000377 [SR] Repair complete
2014-02-23 19:13:15, Info CSI 00000378 [SR] Committing transaction
2014-02-23 19:13:15, Info CSI 0000037c [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repairedSummary:
Attempted proposed solution. Error still appears.
This is installed:
Microsoft Visual C++ 2005 ATL Update kb973923 - x86 8.0.50727.4053
Microsoft Visual C++ 2005 Redistributable 8.0.56336
Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
I reinstalled:
vcredist_x64 Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) .exe
vcredist_x86 Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).exe
Results:
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable (x64). Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft
Corporation. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable. Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft Corporation.
Reconfiguration success or error status: 0.
I installed SQLServer2008R2_SP1
Same error message came up;
SqlSupport_KatmaiRTM_Cpu64_1.log
MSI (s) (64:94) [23:03:43:910]: Source for file 'pfbafgaq.dll' is uncompressed, at 'H:\SQLServer2008R2_SP1\1033_ENU_LP\x64\setup\sql2008support\PFiles\SqlServr\100\Setup\Release\x64\'.
MSI (s) (64:94) [23:03:43:926]: Executing op: SetTargetFolder(Folder=C:\Windows\winsxs\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.1833_none_8a17faaf2edd3e00\)
MSI (s) (64:94) [23:03:43:926]: Executing op: SetSourceFolder(Folder=1\Windows\winsxs\nvdlei3o.taa\)
MSI (s) (64:94) [23:03:43:926]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.1833,ProductCode={B40EE88B-400A-4266-A17B-
E3DE64E94431},ProductVersion=10.1.2731,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:941]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
MSI (s) (64:94) [23:03:43:972]: Executing op: AssemblyCopy(SourceName=uvdlei3o.taa|
ATL80.dll,SourceCabKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,DestName=ATL80.dll,Attributes=0,FileSize=113152,PerTick=65536,,VerifyMedia=1,ElevateFlags=4,,,,ComponentId=
{837BF1EB-D770-94EB-A01F-C8B3B9A1E18E},,,,AssemblyMode=0,)
MSI (s) (64:94) [23:03:43:972]: Assembly Error:The system cannot find the path specified.
MSI (s) (64:94) [23:03:43:972]: Note: 1: 1935 2: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} 3: 0x80070003 4: IAssemblyCache 5: CreateAssemblyCacheItem 6:
Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"
MSI (s) (64:94) [23:03:43:972]: Assembly Error (sxs): Please look into Component Based Servicing Log located at -169675656ndir\logs\cbs\cbs.log to get more diagnostic information.
MSI (s) (64:94) [23:03:49:882]: Product: Microsoft SQL Server 2008 Setup Support Files -- Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Error 1935. An error occurred during the installation of assembly
'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
MSI (s) (64:94) [23:03:49:882]: User policy value 'DisableRollback' is 0
Thanks, Ted U -
RC-00118: Error occurred during creation of database Raised by oracle.apps.
Hi Experts,
Please note i am doing the clonning from production to test server.
Production Server -
1. Run the adpreclone.pl on the apps & db tier.
2. run the autoconfig on the apps and db tier.
3. shut down the production instance.
4. Moved the files and started the clonning process on the db tier i am getting the below issue.
My current E-Business Suit Version is R12.0.4 Database Version is 10.2.0.3. Operating system is SUN SPARC 64 BIT SUN SOLARIS 10.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Mar 21 18:09:54 WAT 2012
The environment settings are as follows ...
ORACLE_HOME : /erptestdata2/u01/d01/tech_st/10.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /erptestdata2/u01/d01/tech_st/10.2.0/perl/bin:/erptestdata2/u01/d01/tech_st/10.2.0/bin:/usr/ccs/bin:/usr/sbin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/sbin:/usr/bin:/opt/EMCpower/bin:/etc/emc/bin:/etc:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,SPARC-Enterprise/sbin:/opt/sun/bin:/opt/SUNWexplo/bin:/opt/SUNWsneep/bin
LD_LIBRARY_PATH : /erptestdata2/u01/d01/tech_st/10.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/erptestdata2/u01/d01/tech_st/10.2.0/ctx/lib:/erptestdata2/u01/d01/tech_st/10.2.0/lib32
Executable : /erptestdata2/u01/d01/tech_st/10.2.0/bin/sqlplus
The log information will be written to
/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/log/TEST_proddb/adcrdb_TEST.txt
Creating the control file for TEST_proddb database ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:09:54 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 2035496 bytes
Variable Size 432017624 bytes
Database Buffers 624951296 bytes
Redo Buffers 14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:10:16 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Please advise ASAP.
Regards
Mohammed.Nikki,
Check alert<SID>.log file for more details about the error.
It looks like that the source database was not cleanly shutdown before copying the files to the target node. Please do the following and check then:
SQL> connect / as sysdba
SQL> startup mount;
SQL> recover database using backup controlfile until cancel;
-- type CANCEL
SQL> alter database open resetlogs; If the above does not help, then shutdown the source database normally (make sure it is down), re-copy the files and start the cloning process again. -
Error occurred during initialization of VM Using Whs
RDBMS Version: 9i
Operating System and Version: Microsoft Windows 2000 server Service pack 4
Product: Oracle Lite, 9i
AS: 9.0.2.3
When I use the wsh.exe in cmd.exe I have the error:
D:\oracle\prodotti\Ora9iasfe\Mobile\Server\bin>wsh
Error occurred during initialization of VM
Could not reserve enough space for object heap
Environment info:
D:\Documents and Settings\Administrator>java -version
java version "1.3.1_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_03-b03)
Java HotSpot(TM) Client VM (build 1.3.1_03-b03, mixed mode)
D:\Documents and Settings\Administrator>set classpath
CLASSPATH=D:\MOBILECLIENT\Mobile\bin\olite40.JAR;D:\Programmi\JavaSoft\JRE\1.3.1_03\bin;d:\oracle\pr
odotti\Ora9iasfe\MOBILE\CLASSES\OLITE40.JAR;d:\oracle\prodotti\Ora9iasfe\j2ee\home\oc4j.jar;d:\oracl
e\prodotti\Ora9iasfe\j2ee\home\lib\ojsp.jar;d:\oracle\prodotti\Ora9iasfe\jlib\zrclient.jar;d:\oracle
\prodotti\Ora9iasfe\reports\jlib\rwrun.jar;d:\oracle\prodotti\Ora9iasfe\jlib\bigraphbean.jar;d:\orac
le\prodotti\Ora9iasfe\jlib\LW_PfjBean.jar;d:\oracle\prodotti\Ora9iasfe\jlib\bigraphbean-nls.zip;d:\o
racle\prodotti\Ora9iasfe\Mobile\Server\bin\webtogo.jar;
D:\Documents and Settings\Administrator>set path
Path=D:\Programmi\JavaSoft\JRE\1.3.1_03\bin;d:\oracle\prodotti\Ora9iasfe\bin;d:\oracle\prodotti\Ora9
iasfe\Mobile\Server\bin;d:\oracle\prodotti\Ora9iasbe\bin;d:\oracle\prodotti\Ora9iasfe\bin;d:\oracle\
prodotti\Ora9iasfe\jdk\jre\bin\classic;d:\oracle\prodotti\Ora9iasfe\jdk\jre\bin;d:\oracle\prodotti\O
ra9iasfe\jlib;d:\oracle\prodotti\Ora9iasbe\jlib;D:\Programmi\Oracle\jre\1.3.1\bin;D:\Programmi\Oracl
e\jre\1.1.8\bin;D:\WINNT\system32;D:\WINNT;D:\WINNT\System32\Wbem;d:\oracle\prodotti\Ora9iasfe\bin\;
D:\PROGRA~1\ULTRAE~1;d:\oracle\prodotti\Ora9iasfe\MOBILE\sdk\bin
Thanks
RinoRDBMS Version: 9i
Operating System and Version: Microsoft Windows 2000 server Service pack 4
Product: Oracle Lite, 9i
AS: 9.0.2.3
When I use the wsh.exe in cmd.exe I have the error:
D:\oracle\prodotti\Ora9iasfe\Mobile\Server\bin>wsh
Error occurred during initialization of VM
Could not reserve enough space for object heap
Environment info:
D:\Documents and Settings\Administrator>java -version
java version "1.3.1_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_03-b03)
Java HotSpot(TM) Client VM (build 1.3.1_03-b03, mixed mode)
D:\Documents and Settings\Administrator>set classpath
CLASSPATH=D:\MOBILECLIENT\Mobile\bin\olite40.JAR;D:\Programmi\JavaSoft\JRE\1.3.1_03\bin;d:\oracle\pr
odotti\Ora9iasfe\MOBILE\CLASSES\OLITE40.JAR;d:\oracle\prodotti\Ora9iasfe\j2ee\home\oc4j.jar;d:\oracl
e\prodotti\Ora9iasfe\j2ee\home\lib\ojsp.jar;d:\oracle\prodotti\Ora9iasfe\jlib\zrclient.jar;d:\oracle
\prodotti\Ora9iasfe\reports\jlib\rwrun.jar;d:\oracle\prodotti\Ora9iasfe\jlib\bigraphbean.jar;d:\orac
le\prodotti\Ora9iasfe\jlib\LW_PfjBean.jar;d:\oracle\prodotti\Ora9iasfe\jlib\bigraphbean-nls.zip;d:\o
racle\prodotti\Ora9iasfe\Mobile\Server\bin\webtogo.jar;
D:\Documents and Settings\Administrator>set path
Path=D:\Programmi\JavaSoft\JRE\1.3.1_03\bin;d:\oracle\prodotti\Ora9iasfe\bin;d:\oracle\prodotti\Ora9
iasfe\Mobile\Server\bin;d:\oracle\prodotti\Ora9iasbe\bin;d:\oracle\prodotti\Ora9iasfe\bin;d:\oracle\
prodotti\Ora9iasfe\jdk\jre\bin\classic;d:\oracle\prodotti\Ora9iasfe\jdk\jre\bin;d:\oracle\prodotti\O
ra9iasfe\jlib;d:\oracle\prodotti\Ora9iasbe\jlib;D:\Programmi\Oracle\jre\1.3.1\bin;D:\Programmi\Oracl
e\jre\1.1.8\bin;D:\WINNT\system32;D:\WINNT;D:\WINNT\System32\Wbem;d:\oracle\prodotti\Ora9iasfe\bin\;
D:\PROGRA~1\ULTRAE~1;d:\oracle\prodotti\Ora9iasfe\MOBILE\sdk\bin
Thanks
Rino -
Error occurred during automatic upgrade of MDL file
The MDL file is exported from 10.2, we were trying to imported it into 11.2 using OMBIMPORT, got following error message.
MDL1323: Error occurred during automatic upgrade of MDL file </opt/etl/etl.mdl>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Any suggestion is greatly appreciated.I had the same problem
MDL1323: Error occurred during automatic upgrade of MDL file <>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Reason:
I exported mdl from 11.2.0.2 version to 11.2.0.1
Solution:
- Upgrade version DWH from 11.2.0.1 to 11.2.0.2
- Install separate client on the server DWH and run import script from client directory
Maybe you are looking for
-
How do I remove unwanted entries in the Profile Manager window?
Can anyone please explain how do you remove irrelevant entries in the Profile Manager dialog? Since I have both 4.0 and 3.6 installed,each with two profiles,I use to launch secondary profiles with the Profile Manager via a command line instead of a s
-
IReader installed but wont open Urgent help needed please!
I have installed Acrobat Reader X. When i try to open files I get a problem saying Microsoft and Adobe have encountered a problem and need to close. I get an option to Debug, Send error report or Dont send. The information which comes up when I look
-
Time Machine stuck on 'Preparing to back-up'
Hi Since upgrading to Lion my iMac has not completed a Time Machine back-up. It's constantly turning away, saying 'Preparing to back-up'. Any suggestions please? Cheers Phil
-
Events not synching from iPad to iMac in iCal.
Events from my iPhone sych to my iMac just fine, but not my iPad2. I use iCloud, and the settings on both devices are exactly the same. Advice would be appreciated. Thanks.
-
Basic question about Actionscript and symbols
I like the object oriented features of actionscript (2.0). One thing confuses me tho, namely the combination of symbol classes and constructors. Since symbols can't be instanciated by new SomeMovie(...), but rather has to be created with attachMovie(