Error 0x8026007 CPU running at less than 1GHz

I'm trying to install the latest preview build, I'm currently on 9860. However because my pc keeps stepping the cpu down to 800MHz instead of running at the full 4.6GHz I keep getting the error message above. How can get around this? FYI I'm running an
Asus Z97 Pro Wi-Fi board with i7 4790K 4.0GHz overclocked to 4.6GHz and 8GB of RAM.

Have you tried to change the processor speed manually in BIOS?
Additionally please check if you are using the latest BIOS version.

Similar Messages

Activity monitor says I have 1 -3% of System Memory free, yet CPU usage shows less than 10% total of all processes

Activity monitor says I have 1 -3% of System Memory free, yet CPU usage shows less than 10% total of all processes

I think you should review what you wrote. There is no question, hence, my reply. I can't tell by the AM listing what applications are using memory. You need to click on the Real Mem column once or twice to display in descending order.
Aside from what you see in AM, what exactly is your problem or perceived problem. You are very low on Free Mem at the moment the screen shot was taken. Those displays are not depicting your computer's instantaneous memory usage.
About OS X Memory Management and Usage
Using Activity Monitor to read System Memory & determine how much RAM is used
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Memory Usage Performance Guidelines- About the Virtual Memory System
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

I have a Mac Book Pro and run Ver 10.5.8. I bought iLife today and it won't run on less than 10.6.3. How do I upgrade?

I have a Mac Book Pro and run Ver 10.5.8. I bought iLife today and it won't run on less than 10.6.3. How do I upgrade?

If you do, it will be shipped to you on DVD unless someone from Apple tells you otherwise.
(58671)

GT70 2PC Dominator GTX870M. games running at less than 20fps

i added an SSD (samsung 250gb) to my new GT70 2PC Dominator GTX870M.
i formatted the HDD.
i installed a fresh Windows 8 on the SSD. (the HDD had windows 8.1)
i installed all the drivers. and updated them and updated windows.
Bioshock Infinite runs at less than 20fps at medium setting. totally unplayable.
Assassin's Creed 4 Freedom Cry runs at 15fps at low settings. also totally unplayable.
battlefield 4 runs fine Ultra 1080p ~ 60fps.
what is wrong? this cant be normal. i see videos people playing them at Ultra settings with 40fps+
could it be that the Intel Graphics card is taking over and the GTX870M not kicking in?

Yup it might be that.
Go through Nvidia Control Panel and for Global Settings set GTX to be used.
Make sure that you're running newest drivers too, as this might be the problem (even games' updates/patches )

ESS Bank Information errors if end date is less than system date

Hi to all,
We have create an WD Java aplication to create new entries in infotype 0023. We have used a standar component DC (PersInfo).
The first problem - we couldn't create new entries if start date is less than system date and we used:
In transaction SPRO got to Personnel Management>Employee Self Service>Service Specific Setting-->Change Default Start Date
Business Add-In HRXSS_PER_BEGDA. You can set the date in the DEFAULT_DATE method.
Parameters of the method DEFAULT_DATE:
MOLGA (Importing)
PERNR (Importing)
INFTY (Importing)
SUBTY (Importing, optional)
BEGDA (Changing)
We have solved the first problem with begda.
The second problem - we couldn't create new entries if end date is less than system date.
Can anybody helps me about this second problem?
Thank a lot.

Can anybody helps me?
Thank a lot.

ESS Information errors if end date is less than system date

Hi to all,
I have create an WD Java aplication to create new entries in infotype 0023.
First problem: At the beginning I couldn't create new entries if start date is less than system date. To solve this problem I used:
The transaction SPRO to go to Personnel Management>Employee Self Service>Service Specific Setting-->Change Default Start Date
In HRXSS_PER_BEGDA I changed BEGDA to 01.01.1900 in the DEFAULT_DATE method and i solved the first problem.
Now I need solved the second problem - we couldn't create new entries if end date is less than system date.
In this method DEFAULT_DATE I can't change ENDDA because ENDDA isn't a parameter in this method.
MOLGA (Importing)
PERNR (Importing)
INFTY (Importing)
SUBTY (Importing, optional)
BEGDA (Changing)
Can anybody helps me about this second problem?
Thank a lot for your help.

I am creating an aplication WD Java:
- This application uses a R3 Function Module HRXSS_PER_MODIFY_PNNNN
- This FM uses the method CALL METHOD xss_adapter->modify
- This Method uses IF_HRPA_PERNR_INFTY_XSS~MODIFY
- This method uses:
IF buffer_entry-container->a_pskey-endda < user_today.
    msg-msgid = 'PG'.
    msg-msgty = 'E'.
    msg-msgno = '016'.
    msg-msgv1 = 'Data valid only for past is not'(009).
    msg-msgv2 = 'allowed;'(010).
    msg-msgv3 = 'correct'(011).
    msg-msgv4 = 'end date to a date today or future date.'(012).
    CALL METHOD message_list->if_hrpa_message_handler~add_message
      EXPORTING
        message = msg
        cause   = xss_adapter_generic.
ENDIF.
How can I change the value user_today?
This value is a parameter for the method GET_INSTANCE in CL_HRPA_PERNR_INFTY_XSS, but I don't know when this method is called.
Can you help me?

ESS Bank Information errors if start date is less than system date

Hello Developers,
We are unable to create a new Bank Information record of type "Other" from ESS Web Dynpro ECC 6.0 when we set the begda field to a date earlier than the system date. When we attempt this we get the message: "Start date should be after <todays date> or later".
Is there a configuration setting that will allow new records to be created with the begda set to a past date when creating new "Other" bank type records?
Our payroll runs bi-weekly and we need to set the beginning date of a new record to the start date of the payroll cycle, which can be earlier than the creation date.
Thank you

Terry,
In transaction SPRO got to Personnel Management>Employee Self Service>Service Specific Setting-->Change Default Start Date
Business Add-In HRXSS_PER_BEGDA. You can set the date in the DEFAULT_DATE method.
Parameters of the method DEFAULT_DATE:
MOLGA (Importing)
PERNR (Importing)
INFTY (Importing)
SUBTY (Importing, optional)
BEGDA (Changing)
Regards
Sarath

Installing Itunes on a computer with less than 1Ghz processor

I want to install itunes on an older computer with a 700mhz processor. Itunes 8 requires 1Ghz. Is an older version available that I can use?

There was never a version of iTunes for Windows 98/ME, the first version of iTunes for Windows didn't come along until Windows 2000: iTunes Version History

Olioweb QOS error and Test Run is not compliant

Hi,
I made 3 tile setup and test is failing for Olioweb QOS. When I run first 2 tile, test runs fine and run is compliant. Later I ran oly 3rd tile and test run is compliant without any issue.
When I start all 3 tiles together I get olioWeb QOS error for first 2 tiles. Sometimes all 3 tiles gives OlioWeb QOS error.
Attached the result.
Please look into it and let me know if anthing need to be changed in setup.
Thanks,
Suresh

jpschnee,
I have run only olioweb workload for all the three tiles and I do not see any failure in Olioweb.wrf. I have attached the result for the run. It looks like clean run when only Olioweb load is ran.
Again I ran the 3 tile for all workloads . I observed QOS error happens for all three tiles. i.e olioweb workloads. previosuly only for 2 tiles it gave QOS error.
I am trying to find the subsystem which is saturating in my setup. As I asked I am expecting some alarms from Vcenter when resources peaks to its max.
I am seeing CPU is taking less than 70% in all ESXi Servers. Memory less than 20%.
Disk Max latency is less than 20ms.
Network is max 500Mbps for 10G network connectivity.
Do you see above resource utilization problematic?>
Thanks,
Suresh

Err "Only absence less than 1 day are allowed for this absence type

Hi Experts,
When I am creating IT2001 record for EL an error is coming, "Only absence less than 1 day are allowed for this absence type". Although Counting rule is defined properly and in check for Condition of absence <1 day & full day both are checked.
Regards,
Tomesh

Hi Nalla,
The remaining amount for Casual leave is not updated even after we apply the casual leave .
Suppose there are 20 CL quotas available. If we apply for 2 CLs then remaining should be 18.
Regards,
Tomesh

Delivery quantity is less than minimum delivery quantity

Hello Experts,
I received an error log "Delivery quantity is less than minimum delivery quantity 20 EA" when I first tried to create delivery using sales order. Well the reason for the error log was because of the CMIR record maintained in the system with min quantity set as 20 (Ordered Quantity = 10 in the sales order).
After realization, I did delete the CMIR record and then tried to create delivery for the same sales order but I'm still receiving the same error log "Delivery quantity is less than minimum delivery quantity 20 EA".
How can I overcome this issue.
Any help will be highly appreciated.
Thanks in advance

Hi Hegal,
Thanks for your quick response.
But I've one more question regarding the same error log.
Initially the Ordered Qty was 10 and CMIR record was with 20 and it gave me a error log (which works as expected).
I deleted CMIR record and it still gives the same error log "Delivery quantity is less than minimum delivery quantity 20 EA".
Later when I increased the sales order quantity to 20 or more, I'm not getting any error log even though CMIR record is not maintained in VD52. This is something which is unusual and I feel there is some place in the file where this information is stored and later compared against the sales order quantity.
This is something which I would like to know for my own understanding.
I did ask user to delete the sales order line item and reenter the same product and now everything is working as expected.
Thanks

Overall Budget is less than distributed budget

Hi ,
I am getting a error that " Overall Budget is less than distributed Budget" while returning the budget amount.
I am trying to return the distributable amount . I feel the distributable amount is not utilised.
Thanks
Dasa

Hi,
If u r facing this problem from internal orders - use report KO31
If u r facing this problem from WBS Element - use report cjbn
it will adjust the incosistancy in tables ....
Still if u r not resolved please let us know ...
all the best
Prasad

Just tried installing an update to OS. Although the screen tells me that the installation will be completed in less than one minute, that was two hours ago, and the computer won't permit me to shut it down via the power button, as I get an error sound.

Just tried installing an update to OSX Snow Leopard. Prior to trying to update OS, I was running V 10.6.3. During installation, it locked up. Although the screen tells me that the installation will be completed in less than one minute, that was two hours ago, and the computer won't permit me to shut it down via the power button, as I get an error sound. What do I do now? Help!

Hold the power key till it shuts down, it may take a little while, try holding it thru the warning.
Then if it shuts down restart and open Safari/Preferences, General tab, and set "Save Downloaded Files to:"
Select desktop, if desktop is not available in the the drop down menu, click other, then select Desktop from the column from the on the left.
Then download this:
http://support.apple.com/kb/DL1399
This will download the "stand alone installer"
Click on the installer pkg and follow the prompts.
Hope this helps

Umbraco CMS - startindex cannot be less than zero error is showing instead of 404 error page

I am running into an issue with an Umbraco website.
If I miskey the URL on a top level page, e.g. mysite.com/wrongpage I get an asp error.
If I miskey it on a subpage, even if the top level page is incorrect too, I get my correct 404 error e.g. mysite.com/wrongpage/wrongpage2
At this point I'm trying to find out whether it's a bug in Umbraco 4.11.10 or if this error is caused by something obvious. I'm completely stuck and not particularly technical (I'm not a developer).
If anyone could help explain what this error means, and/or if there's any way to correct or bypass it I would really appreciate the help.
The full contents of the error are:
Server Error in '/' Application.
StartIndex cannot be less than zero.
Parameter name: startIndex
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ArgumentOutOfRangeException: StartIndex cannot be less than zero.
Parameter name: startIndex
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[ArgumentOutOfRangeException: StartIndex cannot be less than zero.
Parameter name: startIndex]
System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy) +10698829
System.String.Substring(Int32 startIndex) +12
AutoFolders.NotFoundHandler.Execute(String url) +538
Umbraco.Web.Routing.LookupByNotFoundHandlers.HandlePageNotFound(PublishedContentRequest docRequest) +1148
Umbraco.Web.Routing.LookupByNotFoundHandlers.TrySetDocument(PublishedContentRequest docRequest) +10
Umbraco.Web.Routing.PublishedContentRequestBuilder.<LookupDocument1>b__1e(IPublishedContentLookup lookup) +15
System.Linq.Enumerable.Any(IEnumerable`1 source, Func`2 predicate) +146
Umbraco.Web.Routing.PublishedContentRequestBuilder.LookupDocument1() +198
Umbraco.Web.Routing.PublishedContentRequestBuilder.LookupDocument() +195
Umbraco.Web.Routing.PublishedContentRequest.ProcessRequest(HttpContextBase httpContext, UmbracoContext umbracoContext, Action`1 onSuccess) +139
Umbraco.Web.UmbracoModule.ProcessRequest(HttpContextBase httpContext) +339
Umbraco.Web.UmbracoModule.<Init>b__7(Object sender, EventArgs e) +80
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +136
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +69

Hi Aaronb9,
Since the issue regards ASP.NET and website deployment. I suggestion you post the question in the ASP.NET forums at
http://forums.asp.net/. It is appropriate and more experts will assist you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error 0x8026007 CPU running at less than 1GHz

Similar Messages

Maybe you are looking for