Error 0x80300024 When Installing Windows 7 Using Bootcamp

Hi. I'm trying to install windows on my mac mini. I have a 2010 mini server with dual 500gb hard drives. I want to have one disc for apple and the other disc for windows. When I try the install I get the windows error 0x80300024. After some research I found a straightforward, but not easy solution. It seems windows freaks out when it sees more than one physical hard drive. Therefore the solution is to disconnect the cables for the other hard drive, install windows on the target drive, then reconnect the cables to the other drive. I rather not tear open the mini and do this as it looks a little painful. Anyone have a suggestion on how to get around this? And yes, I know it's a windows issue but i figured there must be some mini users who've experienced this issue.
Thanks.
Craig

Hi Graig,
One possble solution here, with maybe alt key to boot your Windows installer instead of the c key...
PrincessPeachJun 17, 2009, 06:48 PM
I just installed it today (twice actually, after changing my mind about something) so I can tell you how to do it. What I did was completely ignore Boot Camp and used Disk Utility to format the intended Windows drive as FAT32/Master Boot Record. Then I just rebooted with C held down and the Windows 7 CD took care of the rest.
I have a 2009 Mac Pro so all my drivers etc were on my OS disc. If you need to burn the drivers, by all means use Boot Camp just for that part
I got a warning in Windows 7 that Boot Camp had issues with the RC but it has been rock solid so far.
http://forums.macrumors.com/archive/index.php/t-722467.html

Similar Messages

Error 0x80300024 when installing Windows 7

I have a problem with my MacBook Pro Mid 2012: I used Windows 7 on my HDD and a SSD via USB. Then I went to an Apple Authorised Service Provider and replaced the optical drive with the HDD and the SSD is now there, where the "normal" hard drives are.
No matter what I do, I get error 0x80300024 if I want to install Windows 7 on the HDD, which replaces the optical drive. It works on the SSD, however. I replaced the SSD with another HDD and it works too, so I think that Windows is only bootable on the primary SATA connector, but not on the secondary, where the optical drive was. I tried using the Master Boot Record as well as FAT or just made the hard drive empty. Still the same issue. Windows says that the controller is not activated in the BIOS, but there isn't any BIOS on the Mac, at least no BIOS settings.
Interestingly, it works if I unplug the SSD, so that just my HDD is connected. So I guess Windows has difficulties by recognising two SATA controllers. So I can install Windows 7, but the problem is that "no bootable drive" is found if I connect the SSD again. So Windows is not only uninstallable, it is not bootable too.
Now I would have to options: install Windows 7 on the 120GB SSD, which wouldn't be enough for OS X plus Windows or switch the HDD to the primary SATA connector and the SSD to the other one. This would cost 60 Euros again and I can't believe that there is no other solution.
Did anyone else experiences the same issue or has a solution for me? I just want to install Windows 7 on the HDD and it was working on my old 2009 MacBook Pro, but now it's not working and if I search on Google I just get solutions for the Mac Pro (there it was the RAID, which caused this issue). Others, like Mac mini users, who are using two hard drives, solved this by formatting (FAT32, Master Boot Record and/or just emptying everything and selecting "empty space"). This didn't work for me

For my MBP late 2011, I had a SSD in both the main and optibay spaces.
I installed windows on the optibay SSD drive and was able to boot via option key. I had to first create a mbr partition on the optibay SSD. I then had to open up the MBP and move the optibay SSD to the main slot and reinstall my DVD drive. I then installed windows 7 via CD and eventually bootcamp drivers. After install, I removed DVD drive and moved optibay SSD back to optibay and reinstalled main SSD drive with mac osX.
now I have a rMBP and bootcamp is an even different beast. see macrumor post:
http://forums.macrumors.com/showthread.php?t=1414769
The rMBP needs a FAT partition to be able to install to a thunderbolt drive. Now my prediction is that the 2012 MBP may have similar requirements in order to install and boot from optibay HDD.
You can try to test via my method.
MW
rMBP 2.7ghz, 512gb SSD

How do I install windows using BootCamp without cd drive fot the new MBP?

I need some softwares for my work (modelsim, altera, ltspices etc) but some of them only supports windows.
New MBP doesnt seem to have a cd driver.
How do I install windows using bootcamp without cd drivers?

You can use a USB thumbdrive to do this, assuming you have access to a windows machine to format the usb stick.
I installed Win7 on my MB Air (2011), which of course lacks a DVD drive altogether, using this technique.
Basically, you download a tool called rEFIt to your macbook. ( http://sourceforge.net/projects/refit/files/rEFIt/0.14/rEFIt-0.14.dmg/download ) When this is installed, it gives you a boot selector menu when you boot the Macbook ('Do you want to boot to MacOS or to the USB drive?')
Then you download and run an Apple tool called Boot Camp Assistant, which allows you to partition your HD for the two operating systems to share; it also pulls down all the windows drivers you need.
Then prep the USB thumbdrive on a windows machine to be a Win7 installer disk. You'll want a drive in the 4gb+ range I think. You have to set up the thumbdrive to be bootable (lots of tools for that available), and then copy all the windows installation files over to it.
Put the thumbdrive in the macbook and boot holding down the option key.
Choose the rEFIt icon on boot, then choose to boot from the thumbdrive, then format your new windows partition to something Win7 can handle, and install windows.
On my machine I followed a slightly more involved process and wiped out MacOS entirely. I would have kept it on a small partition if I'd had a bigger hard drive.
If you need super detailed instructions, CNET has some here:
http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/
Tech-Recipes has some similar instructions here:
http://www.tech-recipes.com/rx/9136/macbook-air-install-windows-7-with-boot-camp -without-an-external-dvd-drive/
If you have any issues after trying this, ping me and I may have solved them when I went through the same process.

Just installed windows using bootcamp..... Explorer works but safari doesnt

Like it says i just installed windows using bootcamp. I booted into mac and airport is connected to my wireless signal but when i open safari it says im not connected.. i ran diagnostics but it said it could fix the problem and to contact my provider... however i decided to check and boot into windows and lo and behold i have a fast active internet connection through the wireless signal... what the heck is going on ?

also the mac wireless has worked on every other wireless network ( my school , my home) but it wont work at my office even thought the windows side will connect wirelessly... what gives?

If I use a USB stick for time machine, will I be able to install Windows (using bootcamp) from the same USB?

I have a 64GB USB Stick, and I am interested in usign it with time machine. My question is, firstly, is this possible? And secondly, if I do do this, would it be possible to install windows using bootcamp from the same USB. My mother refuses to let me install windows without a backup of Mac OS X, so I really need to know if this is possible???

You need to use a drive that is larger than your Mac's internal drive for Time Machine, so a USB stick will not work. You need to buy an external hard drive. It's worth it. Time machine is a fantastic backup system, keeping not just a single backup, but multiple versions of your files as well (hence the need for a larger drive).

'No bootable disk' error message when installing Windows7 with Bootcamp

Hey,
It seems so many people have had this problem which I am having now, I've tried searching for a solution that works but to no avail. So I'll give as much detail to this problem in the hope that someone knows the answer!
When running bootcamp assistant in order to install Windows 7 on my MacBook Pro (running Lion), I am able to go through all the steps - create USB installer, download software and partition hard drive. However, when the computer restarts I am faced with the black screen displaying "No bootable device - insert disk and press any key to continue". Nothing seems to work!
I've tried using a DVD instead of a usb to install Windows, using a burned copy of the ISO disk image (in UDF format) of Windows and I've tried using a sony and a san disk USB. I've tried holding down the option key on start up to see if I can select the disk manually but nothing appears (just my hard drive and the recovery mode).
Any help would be really appreciated! I'm in need of windows in order to run some programs to carry out data analysis on endangered species for research.

Thanks Bob! My problem was that I was following advice from elsewhere on the internet that said I should burn a DVD in UDF format when in fact just burning it using disk utility in ISO made it work. Thank you so much!

Please help me I had installed windows using bootcamp assistant and forget to get back to Mac OS while starting by using that specific keys

Help me

It's normal for the Mac to set the Windows partition as the default startup disk when installing Windows since it will restart a couple of times during the install.
One way to get back to OS X is to restart and hold down the Option key. You'll get a display of the various drives you can boot to. Double click on the OS X drive.
An Option key boot is a temporary choice, and your Mac will continue to boot to Windows by default. To change that, once you're back in OS X, open the System Preferences and click on the Startup Disk icon. Click on the OS X drive to make it the default choice.

Error 0x80070017 when installing Windows 7 via Boot Camp...

I've been trying hard to research this issue and haven't come across anything that has worked for me.
At work, we have an iMac (Early-2009) that we wish to install Windows 7 on. Previous user has left, so I reinstalled Snow Leopard (10.6) and used Disk Utility from the disc to reformat complete to GUID single partition Mac OS Extended (Journaled), which is pretty standard for Macs. Mac OS X installed and booted just fine. I updated completely to 10.6.8 and all other updates. Only installed Microsoft Office 2011 and Firefox.
So Boot Camp begins...
Found that the early-2009 model doesn't "support" Windows 7 64-bit, so we are fine going with 32-bit. The 32-bit Windows 7 disc has been used to install Windows 7 using Boot Camp on 2 Mac Mini's (one Intel Core Duo, the other one Intel Core 2 Duo) just a few days ago.
Opened Boot Camp Assistant, partitioned the 1TB drive equally, inserted the Windows 7 disc, and clicked Restart.
It boots from the Windows 7 disc, I go through the options, choose the BOOTCAMP partition and format it (I assume Windows 7 is choosing NTFS for me). Click next.
It copies the files instantly, but then "begins" to Expand the files. It remains at 0% for 5-10 minutes (I can hear the Windows 7 DVD spin down and spin up, but mostly spin down). That's when the error hits:
"Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017"
I click Ok and cancel the install. Restart and boot back into Mac OS X. And here I am.
Important Notes:
I've tried multiple times with a 64-bit disc as well. I will likely go check out another 32-bit disc from our software department, but I know this disc works on other Macs.
This issue occurred a month back as well when we attempted to install Windows 7 via Boot Camp (so before the hard drive and OS were reformatted and reinstalled). I was hoping reformatting and reinstalling the Mac OS X would solve the issue.
The Superdrive appears to be working just fine.
I read somewhere that I need to use repair disk to fix it. Does anyone know if I can repair disk a NTFS partition? Or am I suppose to repair disk the parent drive itself? The place I read it wasn't specific AT ALL and the forum was closed and I couldn't find a way to get a hold of the person. It just said "Repair disk did the trick". People, if you find a solution to your own problem, POST the solution!
Thanks in advance!

Yea, I saw that kb article. I verified we have the early 2009 iMac. It's an iMac 9,1 (3.06 24-inch, A1225).
As far as different hardware, I really don't think so, but I'll have to double check with my fellow employees. The specs all match up, but I'll see if anyone remembers having to replace hardware or send it into Apple.
I did think of trying an external DVD drive too, I'll see if I can scrounge one up. I'll post if it works or not.
The employee using the machine knows Windows, but is willing to learn the Mac OS X. Diversify your experiences I always say!
An added note to the Repair Disk "solution". Turns out you can't run Repair Disk on NTFS partitions or the parent hard drive that contains that partition, which makes since. I can only run Repair Disk on the HFS+ partition which did no good. (This is, of course, from booting up using a Mac OS X Install DVD).
Mac_Win, thanks for the suggestions!

Error 0xc00000e9 when installing windows 7 on OSX lion

I have a mid 2011 model of macbook pro i7 15 inch , and i just upgraded to OSX lion from os leopard . I tried to install windows 7 via bootcamp 4.0 , and the download for the windows support software always hangs at mid point , and must retry several times before it completes. After which when starting to install windows 7 , at the screen where it says loading windows file , suddenly there is an error of 0xc00000e9 , and i could not continue to install after which , even though i have removed all USB. Is there any way to solve this or do i have to downgrade to bootcamp 3.0 to install the windows 7.
Thanks

No downgrade, what you need to do is head to Bootcamp and delete the Bootcamp partition
Then head to Disk Utility and Erase Free Space with Zero. this will take some time and write zeros' to all your spare space on the drive, it also reads those zeros back to confirm and when it can't do that the driver software will map off the problem sector on your drive.
Once that's finished, use the Bootcamp software again and Windows should install.
You should learn about Carbon Copy Cloner and WinClone so you can restore OS X or Windows
https://discussions.apple.com/docs/DOC-3045
also read this, if your not going to be using Windows heavily or for 3D games, then this might be a better solution that dual booting.
https://discussions.apple.com/docs/DOC-3321
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Installing windows using bootcamp. HELP!! :(

Ok so ive decided i need to install windows onto my mac, to use software important for my university studies, and have opted to use the boot camp method.
I started by purchasing and downloading windows 8 directly onto my mac book pro, and as such, have a file called 'windowssetupbox.exe' in my downloads.
i have attempted to follow the instructions to use bootcamp, however it doesnt seem to work. When i first attempted it, all that happened what that i downloaded the suport software onto a usb, so i now have a usb with the support software on it (i think) however this has since been erased, and when i try anything else (involving iso images for example), i cant get it to work. Firstly i dont know what an iso image is, (i presumed it to be the .exe file i downloaded), but i dont seem to get anywhere. Could anyone guide me in the right direction as to how to go about this. I feel like i need to start from scratch but im not really sure what im doing.
thanks.

You have to run the setup file on a Windows machine. If you want 64 bit Windows then you must run the setup on a 64 bit Windows machine.
Once the download is finished (about 3GB if I remember correctly) you will get the option to create install media.
Select that then check the box for creating an iso file.
Move that iso file to your Mac then start Bootcamp Assistant and point it to that iso file. You'll also need to download the support software again if you've deleted it.
You'll need a 8GB USB stick to put everything on.

My mbp 15 retina doesn't start up, i tried to install Windows using bootcamp but it didn't work well

I tried to install windows 7 using bootcamp, i did every steps, when the installation of the windows started i selected the partition created by bootcamp but it didn't install because it said that maybe something was corrupted, then i quit the installation but now my mac doesn't start up, the screen gets black and it says: no bootable device -- insert boot disk and press any key.
I try to press alt/option when it starts but nothing occurs. I don't know what is going on, i really need to use it urgently, i hope i won't loose my data. Well i hope someone could help me!!

Do not install MacKeeper:
https://discussions.apple.com/docs/DOC-3026
(Please note that references to the original developers, Zeobit, should now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.

Can't manage to install Windows using Bootcamp

For some reason I can't manage to install Windows 7 using bootcamp. It paritions the disk, pop in the Windows installation DVD and restart.
The Macbook Pro takes a while to startup (it stays on the grey screen for a while). After a while of waiting, it goes to a black screen with a white blinking thingy on the top left of the screen. Here is where it gets stuck... I've tried to leave it like that for 30 minutes or so, but it just keeps blinking.
I tried holding the option key at startup and boot into the disc, but it does the same thing. I'm using a original Windows 7 DVD. I tried a XP CD also, no go.
I'm using an early 2008 Macbook Pro (2.4Ghz) with Snow Leopard.
Anyone can help?

Having this exact issue after getting my (Early 2008 24", 3.06GHz, 8800GS) iMac back from having it's stock drive replaced by Apple.
Prior to the drive replacement, it had a stock 500GB drive, and dual-booted 10.6/XP Pro flawlessly. Then the drive died. After running it off an external for a month, I brought it in for service.
Apple replaced it with a 640GB, as apparently they don't stock the 500GB disks anymore.
10.6 works fine.
Applied updates, restored my home directory and apps from the external, no problems.
Ran BootCamp Assistant, made a 120GB partition. Inserted the same XP CD I've used before. Reboot...black screen, flashing cursor. Waited 30 min for it to pick up, nada. Rebooted, held down Option, picked the disc - same deal.
Rebooted into 10.6, checked the disc was readable. No problem. Tried starting an install in VMware from the disc. No problem. Tried the disc in my MBP. No problem, boots like a charm. Highly skeptical the CD is the issue.
Re-ran BootCamp Assistant, merged the partition back into the 10.6 one. Rebooted from my 10.6 install disc, ran Disk Utility's Repair over the internal disc - no errors found. Repaired permissions to be safe (found a couple minor things in my home directory). Rebooted into 10.6 and ran BootCamp Assistant again, this time with a 32GB partition. Same problem.
Rebooted from the 10.6 install media, wiped out the partitions, laid a new, fresh OSX install on the internal. Booted, ran updates, then BootCamp Assistant (did not copy any of my data back this time, nor did I install anything other than the OS and updates). Same problem.
Shut down completely, unplugged for 5 min or so (reset SMC). Booted, clearing PRAM. Booted into 10.6, re-merged the partitions. Rebooted, clearing PRAM again. Booted into 10.6, ran BootCamp Assistant to create the partition. Rebooted, clearing PRAM yet again. Removed all peripherals save the keyboard/mouse. Tried to boot from the Windows CD - same problem.
Dug out my WIn7RC1 DVD for kicks. Same problem through similar iterations. This disc also boots fine on the MBP, and can start a VMware installation without issue.
As we speak, I'm booted from the 10.6 installation media once more, this time zeroing out the internal disc entirely. If this doesn't work, I'm not sure where to go next.

I tried installing windows using bootcamp and it didnt work properly, now neither is load.

So i tried installing windows, it got to the point where you are on the windows setup after a reboot. I didnt have enough space on my mac so i pressed cancel and it shut down my mac. Now when i start it up it says "No bootable device -- insert boot disk and press any key" so i put in the memory stick i used and press all the keys and nothing happens, i even try restarting it with it in and taking it out and restarting it but the same message keeps coming up. I have no idea what to do, any advice?

Two possibilities: As CellerDweller suggests, your computer is still set to boot from the Windows partition which it cannot. restart holding Option (also labeled Alt). The second is that you erased the Mac partition. If attempting to reboot with the Option key and selecting the Mac drive fails, restart holding Command R to enter Recovery mode. You can then run Disk Utilities to repartition the Mac the the GUID partition scheme and then format the drive as MacOS Extended (journaled). If you have a backup you can then restore using the backup drive. If not you can redownload the Mac OS.

Macbook pro mid 2012- Wanting to know how to install windows using bootcamp

Hello everyone,
     I'am sure this question has been asked many times but this is urgent and can't really find all the necessary steps I need in my situation. I am using a MacBook pro mid 2012 I believe. I'am taking colleges courses, and need to use visual basic. Unfortuanatly visual basic is not compatible with macs. I've done a few researchs and found out installing windows 7 with bootcamp is maybe the best solution? Probleme is I have no start up disk that came with the mac, and the cd drive is broken. I do have an external hard drive I bought a few months ago.
     What exactly do I need in order to set this up? Is it still possible without a start up disk, and by using a external hard drive? How should I get windows 7? Online or buy the disk?
     If someone could either direct me to a threaded explaining a similar case? Or point out what I need, and a few important steps to follow?
I appreciate it!
Thanks
LJ.C

if your MBP has a DVD drive (even if broken), it requires that to install windows via boot camp so you have 2 options
get your dvd drive repaired, or
see if the usb boot camp hack will work for you - http://forums.atomicmpc.com.au/index.php?showtopic=51873

Satellite L500-21T - Stop error code when installing Windows 7

Hello
I bought a notebook Satellite L500-21T from saudi arabia.
I lost the hd recovery during trying fix windows 7 installation. If I try to install windows 7 I get stop code 0x0000009c error. If I turn sata to compitibality from AHCI Windows xp sp2 not sp3 installed but most drivers like display and wlan not installed. Trying to update BIOS give that is not suitable for that the phoenix version of bios 1.5
I changed HD and RAM but the same problem. It may the BIOS?
plz help me

Hi buddy,
Do you install Windows 7 from Toshiba recovery disk or normal Microsoft disk?
Usually if you install Windows 7 from recovery disk, everything should work well because its pretested image from Toshiba and you get back out of box settings (factory settings).
If not it seems to be a hardware malfunction
By the way: Try to load the default settings in BIOS. You can do this if you press F9 key in BIOS.

Error 0x80300024 When Installing Windows 7 Using Bootcamp

Similar Messages

Maybe you are looking for