Error 0x81020026 When updating the SharePoint item

I have to update some items in sharepoint which exit at links like http://dev-sharepoint/WorkFlow/_Layouts/listform.aspx?PageType=4&ListId={DB8F7CAD-D459-46FD-82B8-5888A55C1EC2}&ID=3469
When I make GetListItems SOAP request with listName {DB8F7CAD-D459-46FD-82B8-5888A55C1EC2}, I get the correct response with all items belonging  to this list.
But when I make UpdateListItems request to listName {DB8F7CAD-D459-46FD-82B8-5888A55C1EC2} and whatever ID of an item in this list, I receive an error: 
    <ErrorCode>0x81020026</ErrorCode>
    <ErrorText>The page you selected contains a list that does not exist. It may have been deleted by another user.</ErrorText> 
What do I do wrong?

Hi Eric,
This is my sap for the pick list no 6 actually in my code i loop with the above xml  two  times for the two lines so picked quantity will be two and bill allocation quantity  will be also 2 and binabsentry is 1. I do now what is the stock unit.Please kindly help me out what will be my exact code...i am very new to sap
Regards,
Vigna

Similar Messages

  • Error 4 when updating the text data

    When i am trying to load the data  using IP i am facing the issue Error 4 when updating the text data.Please suggest me
    Edited by: srikanth reddy612 on Dec 15, 2011 12:45 PM

    hi srikanth,
    you might have selected given lowercase data
    and please check in the Infoobject the lowercase Checkbox is unchecked then it will allow you to update from IP.
    also check in the Datasource fields tab whether particular field is unchecked with lowercase.
    if checked all records you are pushing will have to be in uppercase.
    thanks
    Sankaresh S

  • I am getting an un expected error message when updating the setting to "extend network".  Is there an obvious setting I may be missing?  Cisco router being used.

    I am getting an un expected error message when updating the setting to "extend network".  Is there an obvious setting I may be missing?  Cisco router being used.

    If you are trying to "extend" using wireless only, you may not be aware that Apple designed the "extend" feature as a proprietary setting to only work with other Apple routers.
    It is extremely unlikely that this will work with a Cisco router.
    If your plans call for connecting the AirPort Express to the Cisco router using a wired Ethernet connection, it should be possible to configure the Express that way.

  • Upgraded to 10.3.1.55, now can't set iT as default player,"An error occurred when updating the default player for audio files types.  You do not have enough access privileges for this operation." How to fix?

    After I upgraded iTunes, iTunes doesn't recognize CD in the drive, apparently isn't the default player.  It won't let me set iTunes as the default player, I get the error message "An error occurred when updating the default player for audio files types."  I tried Whitesides' remedy (changing Read Only status in folder in Windows) but it didn't solve the problem.  Any suggestions?  Thanks.
    J

    Oddly enough. I think I just solved it. It looks like, for some reason, my computer has about 8 different "iTunes music" folders, and I've been saving my music to the wrong one. Neat. Music now imports and plays as it should. Copying things over is going to be so fun tonight!

  • Why am I suddenly getting error messages when updating the vault?

    Hi, I would greatly appreciate any advice anyone here can offer of how to correct a problem that started recently.
    I've updated the vault for Aperture successfully many times before, but now, when I attempt to update the vault I've started receiving error messages. Everything seems to proceed normally at first, a progress bar opens showing "Comparing library to vault", then when that is done, another opens showing "updating vault 'photograph lockbox' from library". But after that I now get an error message which reads:
    "Update Vault Error:
    13345 errors occurred. The first 5 are:
    Error creating a directory in vault ‘Photograph Lockbox‘.
    Error creating a directory in vault ‘Photograph Lockbox‘.
    Error creating a directory in vault ‘Photograph Lockbox‘.
    Error creating a directory in vault ‘Photograph Lockbox‘.
    Error creating a directory in vault ‘Photograph Lockbox‘."
    I have a Mac Pro running 10.4.11, my version of Aperture is 1.5.6. I haven't updated either of those for financial reasons and because I have no pressing need to. And everything seemed to be working fine until a couple of weeks ago when the updating errors started.
    My vault is in a Seagate portable hard drive.
    Does anyone have any ideas about how to fix this?
    Also, does this mean that none of my new photographs are being backed up in the vault? That would be scary!
    Thanks for any advice offered.
    Rick

    Hi
    Exactly the same problem started for me a little while ago.
    Firstly, you are correct in assuming that subsequent backups are not taking place. This can easily be confirmed by looking at the colour of the synchronization button. Red circular arrows indicate that there are Digital Masters in your library that have not been backed up in a vault. What colour are yours?
    The problem is either a program error or hardware or both.
    I suggest that you create another vault, this time on your desktop. Backup to it. If this is successful the problem is not with the Aperture program.
    I was advised to format my hard drive as "Mac OS Extended (journaled)" before attempting to backup.

  • ERROR occured when update the ""Rescue and Recovery 4.2"".....​.

    dear all, i'm a newbie with the TP notebook, and i'm a chinese , sorry for my POOR english !!
    hope you all will understand what i explain now......
    i just buy a T61 last nite, but when i try to "UPDATE" my system, two error message shown to me.........
    Error 25013: Error obtaining the Rescue and Environment drive letter
    Error 25012: Error accessing the Rescue and Recovery service partition
    at last, i can't finish the "Rescue and Recovery UPdate" anyway !!
    and i've try to download the "Rescue and Recovery 4.2" from the web manually, but got the same error occured !!
    anyone try before ?
    pls help me to solve the problem !!
    P.S. because i just buy my T61 within 24 hrs, i'm so worry about this !!
    thanks so much !!
    Regards

    Hi Mark,
    Good idea!  No luck though, although my R&R partition is still healthy and boots nicely.  I'm wondering if the solution wasn't actually the removal of your second hard drive.  Other threads discuss how getting rid of network shares helped similar problems, as R&R wanted to use drive letters that were already taken by network drives.  Me, I've got an "F:" that's my swap partition and a "G:" that's my fat32 partition.  If the R&R upgrade program is hardcoded to mount the hidden partition as "F:" (for example), rather than trying to dynamically grab the first available drive letter, I could understand what was going on.
    I'd unmount my F and G partitions if I knew how to do so in windows, but don't know of an nondestructive way to do this.
    With a specific idea like this my normal (linux) next step would be to go read the source and find out if that really is the problem.  Can't do that in this case unfortunately, but if a Lenovite happens to be reading this forum and can direct me to the proper place to submit a real bug report, I'll do so.  Can only find service call info on the website, which doesn't help to submit a bug.
       Alec

  • 12017 error code when updating the X6 software dev...

    Hi every one, I'm trying to update my X6 software and I get an error  12017, I did every thing they tolled me to do, like remove the OVI SWITE and install it again and nothing happened.
    Please Help......

    I too am getting same error. Purchased E5 few days ago and download latest ovi suite from nokia site. Why nokia is not fixing this bug despite of so many complaints. I used beta software updater and it updated my phone's software (from 0.4.x to 0.7.x) but when I go to 'Software Update' on my mobile, I still see phone update of 16 MB marked as important.

  • TS3694 How do I solve error 1015 when updating the firmware????

    Can some kind person please help me with this problem? I have the latest iTunes and I have now tried 4 times to update my phone and I get the same message everytime, Thanks

    You will get that message if you tried to downgrade the firmware. It is usually associated with jailbreaking, and if that is the case there is often no way to fix it.
    Try to force it into restore mode:
    Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
    Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again.
    If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    When the iPhone finally appears in iTunes, choose "restore from backup".

  • After upgrade SP-Crawl Error: The SharePoint item being crawled returned an error when attempting to download the item.

    Hi All - After the upgrade, I am getting SP-Crawl Error for certain links. I check the Crawl component has proper permission.
    Google is showing some article like
    http://blog.karstein-consulting.com/2012/04/20/error-in-crawl-log-the-sharepoint-item-being-crawled-returned-an-error-when-attempting-to-download-the-item/
    not sure if this resolution is referring to 2010 and/or 2013. 
    I checked the registery editor. I couldn't find 14.0 under the Office Server.
    Any clue?
    Regards,
    Khushi
    Khushi

    I checked the web application policy the search crawl account has full read permission.
    Crawl
    Fiddler
    Log Error referring the Correlation ID
    01/06/2014 13:05:06.14  w3wp.exe (0x1698)                        0x0118 SharePoint Foundation        
     Monitoring                     nasq Medium   Entering monitored scope (Request (GET:/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
    Parent No 
    01/06/2014 13:05:06.14  w3wp.exe (0x1698)                        0x0118 SharePoint Foundation        
     Logging Correlation Data       xmnv Medium   Name=Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD) e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.14  w3wp.exe (0x1698)                        0x0118 SharePoint Foundation        
     Authentication Authorization   agb9s Medium   Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.15  w3wp.exe (0x1698)                        0x1738 SharePoint Foundation        
     General                        af71 Medium   HTTP Request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.15  w3wp.exe (0x1698)                        0x1738 SharePoint Foundation        
     General                        af75 Medium   Overridden HTTP request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.15  w3wp.exe (0x1698)                        0x1738 SharePoint Foundation        
     General                        af74 Medium   HTTP request URL: /sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.17  w3wp.exe (0x1698)                        0x1738 SharePoint Foundation        
     Files                          aise3 Medium   Failure when fetching document. 0x80070090 e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.17  w3wp.exe (0x1698)                        0x1960 SharePoint Foundation        
     Monitoring                     b4ly Medium   Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
    Execution Time=20.5461867360237 e8b1679c-0476-70d4-9fcd-2cef5be44461
    01/06/2014 13:05:06.17  w3wp.exe (0x1698)                        0x1960 SharePoint Foundation        
     Monitoring                     b4ly Medium   Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
    Execution Time=29.917489513332 e8b1679c-0476-70d4-9fcd-2549ba3ee9d4
    01/06/2014 13:05:06.17  w3wp.exe (0x1698)                        0x1960 SharePoint Foundation        
     Monitoring                     nasq Medium   Entering monitored scope (Request (GET:<SiteURL>nsurance%20Benefits%2fLife%20Insurance%2fBasic%20Life%20and%20ADD&FolderCTID=0x01200039DA632EEACF264685CF39D68A18F7C8)).
    Parent No 
    Any clue?
    Regards,
    Khushi
    Khushi

  • The SharePoint item being crawled returned an error when attempting to download the item.

    I get this error when I run full crawl.
    The SharePoint item being crawled returned an error when attempting to download the item.
    I did make sure that the crawl account has full read access to the web application. I am able to access the page and site just fine from a browser. I am not sure what is causing the problem.

    On closely looking at ULS logs, this is what I am noticing....
    CSTS3Accessor::Init: SharePointError found in URL
    http://xxxxx/default.aspx header value 0, hr=8004FD0F  [sts3acc.cxx:566]  d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx 
    CSTS3Accessor::Init fails, Url sts4://xxxx/siteurl=/siteid={c011d5c9-9019-41e8-bf5a-5176739b2b79}/weburl=xxxxx/webid={e42001c0-2ef1-4a8e-8fe5-361d72fa60c2}, hr=8004FD0F  [sts3handler.cxx:312]  d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx 
    CSTS3Handler::CreateAccessorExD: Return error to caller, hr=8004FD0F            [sts3handler.cxx:330]  d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx 

  • WebPart is raising the following error "Invalid data has been used to update the list item.The field you are trying to update may be read only"

    I have created a farm solution and then i deploy it to SharePoint server, the code looks as follow, and i use it to update a page info values (as the current page values represents old info):-
    [ToolboxItemAttribute(false)]
    public partial class VisualWebPart1 : WebPart
    // Uncomment the following SecurityPermission attribute only when doing Performance Profiling using
    // the Instrumentation method, and then remove the SecurityPermission attribute when the code is ready
    // for production. Because the SecurityPermission attribute bypasses the security check for callers of
    // your constructor, it's not recommended for production purposes.
    // [System.Security.Permissions.SecurityPermission(System.Security.Permissions.SecurityAction.Assert, UnmanagedCode = true)]
    public VisualWebPart1()
    protected override void OnInit(EventArgs e)
    base.OnInit(e);
    InitializeControl();
    using (SPSite site = new SPSite(SPContext.Current.Site.Url))
    using (SPWeb web = site.OpenWeb())
    SPList list = web.Lists["Pages"];
    web.AllowUnsafeUpdates = true;
    foreach (SPListItem items in list.Items)
    items["Author"] = "SharePoint";
    items["Created"] = "01/08/2014 01:44 PM";
    items.Update();
    list.Update();
    web.AllowUnsafeUpdates = false;
    protected void Page_Load(object sender, EventArgs e)
    but when i try adding this web part to a page i got the following error:-
    Invalid data has been used to update the list item.The field you are trying to update may be read only
    so can anyone advice?

    i only changed lines bitween 
    web.AllowUnsafeUpdates = true;
    and
    web.AllowUnsafeUpdates = false;
    and other parts of code remains without change
    so it will updates all pages in current web
    yaşamak bir eylemdir

  • Need to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.

    Hi All
    I have one sharepoint list with huge data i.e with 20columns and more than 200 records with the fields .
    Suppose lets consider there are A,B,C,D,E,F,G,H columns.
    Now i want to create one form with the fields A,C,E.
    When the user enter the existing data of list for columns A,C..based on C value the E column value should change and update that particular item in the list.
    Please guide me without visual web part can we acheive this by Sharepoint designer 2013 or what would be the preferable solution.
    Please help me on this as it is very urgent from me..
    Thanks in Advance
    Sowjanya G

    Hi,
    According to your post, my understanding is that you wanted to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.
    I recommend to create workflow associated to the list and then start the workflow automatically when an item is changed.
    In the workflow, you can add condition and actions as below:
    If current item: C equal to Test1
         Set E to Test2
    Then the value of the filed E will be changed based on the value of the filed C.
    In addition, if you create the form using InfoPath, you can add rule to the filed C as below:
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Validation Error when updating Feature work item to completed state?

    We are on the latest version of TFS 2013 and have customized process templates based off of the Scrum template.
    We have a custom workflow for the Feature work item type. I get an error when trying to update the state to custom done state of "Prod Deployment Successful". The error I receive is below:
    TF237165: Team Foundation could not update the work item because of a validation error on the server etc etc.
    I have TFS Admin rights as well as project and project collection Admin rights.
    Custom States:
    Planned
    Canceled
    On Hold
    In Progress
    Ready For QA
    QA Deployment Failed
    QA Deployment Successful
    Ready For Stage
    Stage Deployment Failed
    Stage Deployment Successful
    Ready For Prod
    Prod Deployment Failed
    Prod Deployment Successful
    Custom Workflow:
    "  "  TO    Planned
    Planned  TO  Canceled
    Planned  TO  On Hold
    Planned   TO  In Progress
    In Progress TO   On Hold
    In Progress TO   Ready For QA
    On Hold  TO  In Progress
    Ready For QA  TO  QA Deployment Failed
    Ready For QA  TO  QA Deployment Successful
    QA Deployment Failed  TO  Ready For QA
    QA Deployment Failed TO   In Progress
    QA Deployment Successful TO   Ready For Stage
    QA Deployment Successful  TO  Ready For Prod
    Ready For Stage TO   Stage Deployment Failed
    Ready For Stage  TO  Stage Deployment Successful
    Stage Deployment Failed TO   Ready For Stage
    Stage Deployment Failed TO   In Progress
    Stage Deployment Successful  TO  Ready For Prod
    Ready For Prod  TO  Prod Deployment Failed
    Ready For Prod  TO  Prod Deployment Successful
    Prod Deployment Failed  TO  Ready For Prod
    Prod Deployment Failed  TO  In Progress
    I have also updated the Process Configuration file to map the states to the meta states so I can show the custom states on the Feature board. The section in the process configuration file that relates to Feature is below:
    <States>
            <State type="Proposed" value="Planned" />
            <State type="InProgress" value="Canceled" />
            <State type="InProgress" value="On Hold" />
            <State type="InProgress" value="In Progress" />
            <State type="InProgress" value="Ready For QA" />
            <State type="InProgress" value="QA Deployment Failed" />
            <State type="InProgress" value="QA Deployment Successful" />
            <State type="InProgress" value="Ready For Stage" />
            <State type="InProgress" value="Stage Deployment Failed" />
            <State type="InProgress" value="Stage Deployment Successful" />
            <State type="InProgress" value="Ready For Prod" />
            <State type="InProgress" value="Prod Deployment Failed" />
            <State type="Complete" value="Prod Deployment Successful" />
          </States>
    The error ONLY happens when I try to update a Feature state to "Prod Deployment Successful". I have looked at other posts and searched the internet and have found no help for my exact issue in TFS 2013. For some
    reason, I can't update the state from "Ready For Prod" to "Prod Deployment Successful".  Does anyone have any ideas of what could be wrong or causing my issue?
    Thanks in advance!

    I finally figured out my issue and fixed it.
    I had to update a reference name in the WIT xml file to Common.BusinessValue instead of Closed.

  • I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error.

    I have a problem when updated the new release of iphoto version(11 jun 2012). After that I cannot open any photo libraries and program is error. I must to force quit iphoto window. There are any fixed bug update.

    If you have no photos:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and start.
    Regards
    TD

  • Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

    Hi,
    I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
    the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
    updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
    any help in this regard is highly appreciated
    Thanks,
    Santosh Sutar  

    Hi Satosh Sutar,
    Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
    From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
    And here is an article about updating apps for Office and menifest schema files in the project for your reference:
    How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for